微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DIN 13902-1 | 牙科學.植入牙醫學術語.第1部分:Endosseous牙科植入物系統 | Dentistry - Terminology of oral implantology - Part 1: Endosseous dental implant systems |
| DIN 13902-2 | 牙科學.口腔植入術術語.第2部分:儀器和牙科實驗室部件 | Dentistry - Terminology of oral implantology - Part 2: Instruments and dental laboratory parts |
| DIN 13902-3 | 牙科學.口腔植入術術語.第2部分:臨床術語 | Dentistry - Terminology of oral implantology - Part 3: Clinical terms |
| DIN 13903 | 牙科學.頜位記錄材料 | Dentistry - Jaw relation recording material |
| DIN 13905-1 | 牙科學.牙科用爐.第1部分:用分離式熱電偶進行溫度測量的動態試驗方法 | Dentistry - Dental furnace - Part 1: Dynamic test method for temperature measurement with separate thermocouple |
| DIN 13905-2 | 牙科學.牙科用爐.第2部分:通過燒釉評估煉爐程序的試驗方法 | Dentistry - Dental furnace - Part 2: Test method for evaluation of furnace programme via firing glaze |
| DIN 13907 | 牙科學.填充材料的聚合收縮應力 | Dentistry - Polymerisation shrinkage of filling materials |
| DIN 13938-1 | 牙科學；氣吸設備；針頭與針管的連接尺寸 | Dentistry; suction devices; fitting dimensions for canules and hose fittings |
| DIN 13940-1 | 牙科學.牙科手持器械.連接尺寸 | Dentistry; dental handpieces; coupling dimensions (ISO 3964:1982); german version EN 23964:1989 |
| DIN 13954-1 | 牙科學；牙科旋轉器械.牙銑頭.第1部分:鋼銑頭 | Dentistry; dental rotary instruments; cutters; part 1: steel laboratory cutters (ISO 7787-1:1984); german version EN 27787-1:1990 |
| DIN 13971-2 | 牙科學.正牙產品.第2部分:正牙學中固定弧形鋼絲用附件 | Dentistry - Orthodontic products - Part 2: Attachments for seating archwires in orthodontics |
| DIN 13972-1 | 牙科技術.激光焊接過程的質量保證.第1部分:牙科實驗室的激光焊接 | Dentistry - Quality assurance during laser welding - Part 1: Laser welding in dental laboratories |
| DIN 13972-2 | 牙科學.激光焊接質量保證.第2部分:激光焊接用相同和類似牙科金屬材料適用性 | Dentistry - Quality assurance during laser welding - Part 2: Suitability of identical and similar metallic dental materials for laser welding |
| DIN 13973-1 | 牙科材料.耐磨性試驗指南.第1部分:刷牙磨損 | Dental materials - Guidance on testing of wear resistance - Part 1: Wear by tooth brushing (ISO/TS 14569-1:1999) |
| DIN 13999-1 | 第1部分:牙科托盤 | Dental-Trays |
| DIN 6856-3 | 放射學底片影視箱和觀察條件.第3部分:牙科用放射膠片影視箱 | Radiological film viewing boxes and viewing conditions - Part 3: Radiological film viewing boxes for dentistry |
| DIN 6868-5 | X光診斷圖像質量保證.第5部分:牙科X光照相穩定性試驗 | Image quality assurance in X-ray diagnostics - Part 5: Constancy testing in dental radiology |
| DIN EN 1639 | 牙科學.牙科用醫療器械.儀器 | Dentistry - Medical devices for dentistry - Instruments; German version EN 1639:2004 |
| DIN EN 1640 | 牙科學.牙科用醫療器械.設備 | Dentistry - Medical devices for dentistry - Equipment; German version EN 1640:2004 |
| DIN EN 1641 | 牙科學.牙科用醫療器械.材料 | Dentistry - Medical devices for dentistry - Materials; German version EN 1641:2004 |
| DIN EN 1642 | 牙科學.牙科用醫療器械.牙科植入物 | Dentistry - Medical devices for dentistry - Dental implants; German version EN 1642:2004 |
| DIN EN 21942-1 | 牙科術語.第1部分:通用及臨床術語(ISO 1942-1:1989) | Dental vocabulary; part 1: general and clinical terms (ISO 1942-1:1989); german version EN 21942-1:1991 |
| DIN EN 21942-2 | 牙科學詞匯.第2部分:牙科材料 | Dental vocabulary; part 2: dental materials (ISO 1942-2:1989); german version EN 21942-2:1992 |
| DIN EN 21942-3 | 牙科詞匯.第3部分:牙科器械 | Dental vocabulary; part 3: dental instruments (ISO 1942-3:1989); German version EN 21942-3:1993 |
| DIN EN 21942-4 | 牙科術語.第4部分:牙科設備 | Dental vocabulary; part 4: dental equipment (ISO 1942-4:1989); German version EN 21942-4:1993 |
| DIN EN 27787-3 | 牙科學.牙科旋轉器械.切割工具.第3部分:銑床硬質合金刀具 | Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines (ISO 7787-3:1991); German version EN 27787-3:1993 |
| DIN EN 29168 | 手持式牙科器械.軟管連接件 | Dental handpieces - Hose connectors (ISO 9168:1991); German version EN 29168:1994 |
| DIN EN 61223-3-4 | 醫療放射科評定和常規試驗.第3-4部分:驗收試驗.牙科X射線設備的成像性能 | Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests; Imaging performance of dental X-ray equipment (IEC 61223-3-4:2000); German version EN 61223-3-4:2000 |
| DIN EN ISO 10139-1 Berichtigung 1 | 牙科學.活動假牙用軟襯材料.第1部分:短期使用的材料. | Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2005); German version EN ISO 10139-1:2005, Corrigenda to DIN EN ISO 10139-1:2005-05; German version EN ISO 10139-1:2005/AC:2006 |
| DIN EN ISO 10139-1 | 牙科學.活動義齒軟襯材料.第1部分:短期材料 | Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use (ISO 10139-1:2005); German version EN ISO 10139-1:2005 |
| DIN EN ISO 10139-2 | 牙科學.可摘義齒軟襯料.第2部分:長期使用的材料 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:1999); German version EN ISO 10139-2:2001 |
| DIN EN ISO 10271 Berichtigung 1 | 牙科金屬材料.腐蝕試驗方法 | Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001, Corrigenda to DIN EN ISO 10271:2002-01; German version EN ISO 10271:2001/AC:2006 |
| DIN EN ISO 10271 | 牙科金屬材料.腐蝕試驗方法 | Dental metallic materials - Corrosion test methods (ISO 10271:2001); German version EN ISO 10271:2001 |
| DIN EN ISO 10323 | 牙科旋轉器械.盤片和輪內徑 | Dental rotary instruments - Bore diameters for discs and wheels (ISO 10323:1991); German version EN ISO 10323:1995 |
| DIN EN ISO 10477 | 牙科學.高聚物基的牙冠和齒橋材料 | Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004); German version EN ISO 10477:2004 |
| DIN EN ISO 10637 | 牙科設備.高容量和中容量抽吸系統:德文版本 EN ISO 10637:2000 | Dental equipment - High- and medium-volume suction systems (ISO 10637:1999); German version EN ISO 10637:2000 |
| DIN EN ISO 10650-1 | 牙科學.動力聚合活化劑.第1部分:石英鎢鹵素?zé)? | Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps (ISO 10650-1:2004); German version EN ISO 10650-1:2005 |
| DIN EN ISO 10650-2 | 牙科學.動力聚合活化劑.第2部分:發光二極管(LED)燈 | Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps (ISO 10650-2:2007); German version EN ISO 10650-2:2007 |
| DIN EN ISO 11143 | 牙科設備.汞齊合金分離器 (ISO 11143:1999 + 修改件 1:2002) (包括技術勘誤 AC:2002); 德文版本 EN ISO 111 | Dental equipment - Amalgam separators (ISO 11143:1999 + Cor.1:2002) (includes corrigendum AC:2002); German version EN ISO 11143:1999 + AC:2002 |
| DIN EN ISO 11144 | 牙科設備.給排水管接頭 | Dental equipment - Connections for supply and waste lines (ISO 11144:1995); German version EN ISO 11144:1996 |
| DIN EN ISO 11498 | 牙科手持器械.牙科用低壓電動機 | Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997); German version EN ISO 11498:1999 |
| DIN EN ISO 11499 | 牙科學.局部麻醉用一次性盒(ISO 11499:2007) | Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2007); German version EN ISO 11499:2007 |
| DIN EN ISO 11609 | 牙科學.牙膏.要求,試驗方法和標記 | Dentistry - Toothpastes - Requirements, test methods and marking (ISO 11609:1995); German version EN ISO 11609:1998 |
| DIN EN ISO 13295 | 牙科學.旋轉器械用心軸(ISO 13295:2007) | Dentistry - Mandrels for rotary instruments (ISO 13295:2007); German version EN ISO 13295:2007 |
| DIN EN ISO 13397-2 | 牙科學.牙周刮匙、牙刮器和牙挖器.第2部分:Gr型牙周刮匙 | Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type (ISO 13397-2:2005); German version EN ISO 13397-2:2005 |
| DIN EN ISO 13402 | 外科和牙科手持器械.耐蒸汽消毒、耐腐蝕和耐熱暴露性能的測定 | Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995); German version EN ISO 13402:2000 |
| DIN EN ISO 13716 | 牙科學.可逆和不可逆水解膠體印模材料系統 | Dentistry - Reversible-irreversible hydrocolloid impression material systems (ISO 13716:1999); German version EN ISO 13716:2000 |
| DIN EN ISO 13897 | 牙科學.汞齊合金膠囊 | Dentistry - Amalgam capsules (ISO 13897:2003); German version EN 13897:2004 |
| DIN EN ISO 14233 | 牙科學.聚合基模具材料 | Dentistry - Polymer-based die materials (ISO 14233:2003); German version EN ISO 14233:2003 |
| DIN EN ISO 14356 | 牙科學.復制材料 | Dentistry - Duplicating material (ISO 14356:2003); German version EN ISO 14356:2003 |
| DIN EN ISO 14801 | 牙科學.牙科植入物的疲勞試驗 | Dentistry - Fatigue test for endosseous dental implants (ISO 14801:2003); German version EN ISO 14801:2003 |
| DIN EN ISO 15087-1 | 牙科起子.第1部分:一般要求(ISO 15087-1:1999); 德文版本 EN ISO 15087-1:2001 | Dental elevators - Part 1: General requirements (ISO 15087-1:1999); German version EN ISO 15087-1:2001 |
| DIN EN ISO 15087-2 | 牙科起子.第2部分:沃里克·吉姆斯起子 (ISO 15087-2:2000); 德文版本 EN ISO 15087-2:2000 | Dental elevators - Part 2: Warwick James elevators (ISO 15087-2:2000); German version EN ISO 15087-2:2000 |
| DIN EN ISO 15087-3 | 牙科起子.第3部分:格雷爾(Cryer)起子 (ISO 15087-3:2000); 德文版本 EN ISO 15087-3:2000 | Dental elevators - Part 3: Cryer elevators (ISO 15087-3:2000); German version EN ISO 15087-3:2000 |
| DIN EN ISO 15087-4 | 牙科起子.第4部分:古普蘭(Coupland)起子 (ISO 15087-4:2000); 德文版本 EN ISO 15087-4:2000 | Dental elevators - Part 4: Coupland elevators (ISO 15087-4:2000); German version EN ISO 15087-4:2000 |
| DIN EN ISO 15087-5 | 牙科起子.第5部分:貝恩(Bein)起子 (ISO 15087-5:2000); 德文版本 EN ISO 15087-5:2000 | Dental elevators - Part 5: Bein elevators (ISO 15087-5:2000); German version EN ISO 15087-5:2000 |
| DIN EN ISO 15087-6 | 牙科起子.第6部分:弗洛(Flohr)起子 (ISO 15087-6:2000); 德文版本 EN ISO 15087-6:2000 | Dental elevators - Part 6: Flohr elevators (ISO 15087-6:2000); German version EN ISO 15087-6:2000 |
| DIN EN ISO 15098-1 | 牙科鑷子.第1部分:一般要求 (ISO 15098-1:1999); 德文版本 EN ISO 15098-1:2001 | Dental tweezers - Part 1: General requirements (ISO 15098-1:1999); German version EN ISO 15098-1:2001 |
| DIN EN ISO 15098-2 | 牙科鑷子.第2部分:梅利阿姆(Meriam)型 (ISO 15098-2:2000); 德文版本 EN ISO 15098-2:2000 | Dental tweezers - Part 2: Meriam types (ISO 15098-2:2000); German version EN ISO 15098-2:2000 |
| DIN EN ISO 15098-3 | 牙科鑷子.第3部分:學院型 (ISO 15098-3:2000); 德文版本 EN ISO 15098-3:2000 | Dental tweezers - Part 3: College types (ISO 15098-3:2000); German version EN ISO 15098-3:2000 |
| DIN EN ISO 1567 | 牙科學-假牙基料聚合物 | Dentistry - Denture base polymers (ISO 1567:1999); German version EN ISO 1567:2000 |
| DIN EN ISO 15841 | 牙科學.畸齒矯正用金屬線(ISO 15841-2006) | Dentistry - Wires for use in orthodontics (ISO 15841:2006); English version of DIN EN ISO 15841:2007-01 |
| DIN EN ISO 15854 | 牙科學.鑄型蠟和假牙托蠟 | Dentistry - Casting and baseplate waxes (ISO 15854:2005); German version EN ISO 15854:2005 |
| DIN EN ISO 15912 | 牙科.鑄件包模料和耐火硬模材料(ISO 15912-2006) | Dentistry - Casting investments and refractory die materials (ISO 15912:2006); English version of DIN EN ISO 15912:2007-01 |
| DIN EN ISO 16408 | 牙科學.口腔衛生產品.口腔清洗 | Dentistry - Oral hygiene products - Oral rinses (ISO 16408:2004) German version EN ISO 16408:2004 |
| DIN EN ISO 16409 | 牙科學.口腔衛生制品.手動牙間刷(ISO 16409-2006) | Dentistry - Oral hygiene products - Manual interdental brushes (ISO 16409:2006); English version of DIN EN ISO 16409:2007-01 |
| DIN EN ISO 1797-1 | 牙科旋轉器具.柄.第1部分:金屬柄 | Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992 + AMD 1:1997) including Amendment A1:1999; German version EN ISO 1797-1:1995 + A1:1999 |
| DIN EN ISO 1797-2 | 牙科旋轉器具.柄.第2部分:塑料柄 | Dental rotary instruments - Shanks - Part 2: Shanks made of plastics (ISO 1797-2:1992); German version EN ISO 1797-2:1995 |
| DIN EN ISO 1942-5 | 牙科詞匯.第5部分:試驗術語 (ISO 1942-5:1989); 德文版本 EN ISO 1942-5:1994 | Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989); German version EN ISO 1942-5:1994 |
| DIN EN ISO 20126 | 牙科學.手動牙刷.一般要求和試驗方法.(ISO 20126-2005); 德文版本 EN ISO 20126 | Dentistry - Manual toothbrushes - General requirements and test methods (ISO 20126:2005); German version EN ISO 20126:2005 |
| DIN EN ISO 20127 | 牙科學.電動牙刷.一般要求和試驗方法 | Dentistry - Powered toothbrushes - General requirements and test methods (ISO 20127:2005); German version EN ISO 20127:2005 |
| DIN EN ISO 21530 | 牙科學.牙科器械表面用材料.耐化學消毒劑的測定 | Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants (ISO 21530:2004); German version EN ISO 21530:2004 |
| DIN EN ISO 21533 | 牙科學.韌帶內注射用可重復使用的管式注射器 | Dentistry - Reusable cartridge syringes intended for intraligamentary injections (ISO 21533:2003); German version EN ISO 21533:2003 |
| DIN EN ISO 2157 | 牙科旋轉器械.公稱直徑和命名代碼 | Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992); German version EN ISO 2157:1995 |
| DIN EN ISO 21606 | 牙科.正畸學用彈性體輔助裝置 | Dentistry - Elastomeric auxiliaries for use in orthodontics (ISO 21606:2007); German version EN ISO 21606:2007 |
| DIN EN ISO 21671 | 牙科學.旋轉拋光器(ISO 21671:2006) | Dentistry - Rotary polishers (ISO 21671:2006); English version of DIN EN ISO 21671:2006-10 |
| DIN EN ISO 22112 | 牙科學.牙修復術用假牙(ISO 22112-2005) | Dentistry - Artificial teeth for dental prostheses (ISO 22112:2005); English version of DIN EN ISO 22112:2006-05 |
| DIN EN ISO 22254 | 牙科.手控牙刷.毛刷部分耐彎曲性 | Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection (ISO 22254:2005); German version EN ISO 22254:2005 |
| DIN EN ISO 22374 | 牙科學.牙鉆手柄.電動刮器和刮器梢尖(ISO 22374-2005); 德文版本 EN ISO 22374 | Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips (ISO 22374:2005); German version EN ISO 22374:2005 |
| DIN EN ISO 22674 | 牙科.固定和可移動復位的金屬材料和器具 | Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2006); English version of DIN EN ISO 22674:2007-02 |
| DIN EN ISO 22794 | 牙科.口腔和上頜面外科中骨填充物和增加物用可植入材料.技術文檔內容 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file (ISO 22794:2007); German version EN ISO 22794:2007 |
| DIN EN ISO 22803 | 牙科學.口腔及頜面外科中受控制的組織再生用薄膜材料.技術文檔的內容 | Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file (ISO 22803:2004); German version EN ISO 22803:2005 |
| DIN EN ISO 24234 | 牙醫學.牙科用汞齊合金用汞及合金 | Dentistry - Mercury and alloys for dental amalgam (ISO 24234:2004); German version EN ISO 24234:2004 |
| DIN EN ISO 3107 Berichtigung 1 | 牙科學.氧化鋅/丁香酚和氧化鋅/非丁香酚粘固粉 | Dentistry - Zinc oxide/eugenol and zinc oxide/non-eugenol cements (ISO 3107:2004); German version EN ISO 3107:2004, Corrigenda to DIN EN ISO 3107:2005-01; German version EN ISO 3107:2004/AC:2006 |
| DIN EN ISO 3823-1 | 牙科旋轉器械.牙鉆.第1部分:鋼制牙鉆和硬質合金牙鉆 | Dental rotary instruments - Burs - Part 1: Steel and carbide burs (ISO 3823-1:1997); German version EN ISO 3823-1:1998 |
| DIN EN ISO 3823-2 | 牙科.旋轉牙鉆器械.第2部分:精加工牙鉆 | Dentistry - Rotary bur instruments - Part 2: Finishing burs (ISO 3823-2:2003); German version EN ISO 3823-2:2003 |
| DIN EN ISO 3950 | 牙科學.牙齒和口腔區的命名制度 | Dentistry - Designation system for teeth and areas of the oral cavity (ISO 3950:1995); German version EN ISO 3950:1997 |
| DIN EN ISO 4049 | 牙科學.聚合物填充物、修復及粘接材料 | Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000); German version EN ISO 4049:2000 |
| DIN EN ISO 4073 | 牙科設備.牙科治療室設備項目.識別體系 | Dental equipment - Items of dental equipment at the working place - Identification system (ISO 4073:1980); German version EN ISO 4073:2005 |
| DIN EN ISO 4823 | 牙科.彈性印模材料 | Dentistry - Elastomeric impression materials (ISO 4823:2000+Cor. 1:2004+Amd.1:2007); German version EN ISO 4823:2000+AC:2006+A1:2007 |
| DIN EN ISO 6360-2 | 牙科學.旋轉器械用數字編碼體系.第2部分:形狀 | Dentistry - Number coding system for rotary instruments - Part 2: Shapes (ISO 6360-2:2004); German version EN ISO 6360-2:2004 |
| DIN EN ISO 6360-3 | 牙科學.旋轉器械的數字編碼系統.第3部分:磨石和刀具的具體特性(ISO 6360-3-2005).德文版本EN ISO 6360-3:20 | Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters (ISO 6360-3:2005); German version EN ISO 6360-3:2005 |
| DIN EN ISO 6360-4 | 牙科學.旋轉器械的數字編碼體系.第4部分:金剛石器械的特性 | Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004); German version EN ISO 6360-4:2004 |
| DIN EN ISO 6360-6 | 牙科學.旋轉器械的數字編碼體系.第6部分:磨削器械特性 | Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments (ISO 6360-6:2004); German version EN ISO 6360-6:2004 |
| DIN EN ISO 6360-7 | 牙科學.旋轉器械的數字編碼系統.第7部分:心軸和特殊儀器的特殊特性(ISO 6360-7:2006) | Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments (ISO 6360-7:2006); English version of DIN EN ISO 6360-7:2006-05 |
| DIN EN ISO 6872 | 牙科烤瓷 | Dental ceramic (ISO 6872:1995 including Amendment 1:1997); German version EN ISO 6872:1998 |
| DIN EN ISO 6873 | 牙科用石膏制品 | Dental gypsum products (ISO 6873:1998); German version EN ISO 6873:2000 |
| DIN EN ISO 6874 | 牙科學.樹脂基窩溝和裂紋封閉劑 | Dentistry - Polymer-based pit and fissure sealants (ISO 6874:2005); German version EN ISO 6874:2005 |
| DIN EN ISO 6875 | 牙科設備.牙醫椅 | Dental equipment - Dental patient chair (ISO 6875:1995); German version EN ISO 6875:1996 |
| DIN EN ISO 6876 | 牙科牙根管充填材料 | Dental root canal sealing materials (ISO 6876:2001); German version EN ISO 6876:2002 |
| DIN EN ISO 6877 | 牙科.牙根管充填針(ISO 6877:2006) | Dentistry - Root-canal obturating points (ISO 6877:2006) English version of DIN EN ISO 6877:2006-07 |
| DIN EN ISO 7405 | 牙科學.牙科醫療器械生物相容性臨床前評價.牙科材料試驗方法 | Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials (ISO 7405:1997); German version EN ISO 7405:1997 |
| DIN EN ISO 7488 | 牙科用混汞器 (ISO 7488:1991); 德文版本 EN ISO 7488:1995 | Dental amalgamators (ISO 7488:1991); German version EN ISO 7488:1995 |
| DIN EN ISO 7491 | 牙科材料.色穩定性的測定 | Dental materials - Determination of colour stability (ISO 7491:2000); German version EN ISO 7491:2000 |
| DIN EN ISO 7492 | 牙科探針 | Dental explorers (ISO 7492:1997); German version EN ISO 7492:1998 |
| DIN EN ISO 7493 | 牙科醫生用椅 | Dentistry - Operator's stool (ISO 7493:2006); German version EN ISO 7493:2006 |
| DIN EN ISO 7494-1 | 牙科學.牙科裝置.第1部分:一般要求和試驗方法 | Dentistry - Dental units - Part 1: General requirements and test methods (ISO 7494-1:2004); German version EN ISO 7494-1:2005 |
| DIN EN ISO 7494-2 | 牙科學.牙科綜合治療設備.第2部分:水和氣的供給 | Dentistry - Dental units - Part 2: Water and air supply (ISO 7494-2:2003); German version EN ISO 7494-2:2003 |
| DIN EN ISO 7551 | 牙科吸收點 | Dental absorbent points (ISO 7551:1996); German version EN ISO 7551:1998 |
| DIN EN ISO 7711-1 | 牙科旋轉器械.金剛鉆器具.第1部分:尺寸、要求、標記和包裝 | Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997); German version EN ISO 7711-1:1998 |
| DIN EN ISO 7711-2 | 牙科旋轉器械.金剛鉆器具.第2部分:圓盤刀 | Dental rotary instrument - Diamond instruments - Part 2: Discs (ISO 7711-2:1992); German version EN ISO 7711-2:1995 |
| DIN EN ISO 7785-1 | 手持式牙科器械.第1部分:高速空氣渦輪手持器械 | Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997); German version EN ISO 7785-1:1999 |
| DIN EN ISO 7785-2 | 手持式牙科器械.第2部分:平角和嚙合角手持式器械 | Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995); German version EN ISO 7785-2:1997 |
| DIN EN ISO 7786 | 牙科用旋轉器械.實驗室研磨器械:德文版本 EN ISO 7786:2001 | Dental rotary instruments - Laboratory abrasive instruments (ISO 7786:2001); German version EN ISO 7786:2001 |
| DIN EN ISO 7787-2 | 牙科用旋轉器械.刀具.第2部分:實驗室用硬質合金刀具(ISO 7787-2:2000):德文版本 EN ISO 7787-2:2000 | Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters (ISO 7787-2:2000); German version EN ISO 7787-2:2000 |
| DIN EN ISO 7787-4 | 牙科用旋轉器械.刀具.第4部分:試驗室用微型硬質合金刀具 (ISO 7787-4:2002); 德文版本 EN ISO 7787-4:2002 | Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters (ISO 7787-4:2002); German version EN ISO 7787-4:2002 |
| DIN EN ISO 7885 | 一次性無菌牙科用注射針頭 | Sterile dental injection needles for single-use (ISO 7885:2000); German version EN ISO 7885:2000 |
| DIN EN ISO 9173-1 | 牙科.拔牙鉗.第1部分:一般要求和試驗方法 | Dentistry - Extraction forceps - Part 1: General requirements and test methods (ISO 9173-1:2006); English version of DIN EN ISO 9173-1:2006-09 |
| DIN EN ISO 9333 | 牙科學.硬釬焊材料(ISO 9333:2006) | Dentistry - Brazing materials (ISO 9333:2006); English version of DIN EN ISO 9333:2006-10 |
| DIN EN ISO 9680 | 牙科.工作燈(ISO 9680:2007) | Dentistry - Operating lights (ISO 9680:2007); German version EN ISO 9680:2007 |
| DIN EN ISO 9687 | 牙科設備.圖形符號 (ISO 9687:1993); 德文版本 EN ISO 9687:1995 | Dental equipment - Graphical symbols (ISO 9687:1993); German version EN ISO 9687:1995 |
| DIN EN ISO 9693 | 牙科金屬烤瓷修復材料的熔合 | Dental ceramic fused to metal restorative materials (ISO 9693:1999); German version EN ISO 9693:2000 |
| DIN EN ISO 9873 | 牙科用手持器械.可重復使用的牙科鏡和手柄:德文版本 EN ISO 9873:2000 | Dental hand instruments - Reusable mirrors and handles (ISO 9873:1998); German version EN ISO 9873:2000 |
| DIN EN ISO 9917-2 | 牙科用水基膠粘劑.第2部分:光敏膠粘劑 | Dental water-based cements - Part 2: Light-activated cements (ISO 9917-2:1998); German version EN ISO 9917-2:1999 |
| DIN EN ISO 9997 | 牙科卡式注射器(ISO 9997:1999);德文版本 EN ISO 9997:1999 | Dental cartridge syringes (ISO 9997:1999); German version EN ISO 9997:1999 |
| DIN ISO 11040-1 | 帶藥注射器.第1部分:牙科局部麻醉藥筒用玻璃筒 | Prefilled syringes; glass cylinders for dental local anaesthetic cartridges; identical with ISO 11040-1:1992 |
| DIN ISO 11040-2 | 預灌裝注射器.第2部分:牙科局部麻醉器玻璃管柱塞和盤柄 | Prefilled syringes - Part 2: Plungers and discs for dental local anaesthetic cartridges (ISO 11040-2:1994) |
| DIN ISO 11040-3 | 帶藥注射器.牙科局部麻醉瓶用鉛蓋 | Prefilled syringes; aluminium caps for dental local anaesthetic cartridges; identical with ISO 11040-3:1993 |
| DIN V 13974 | 牙科.牙科裝置和附件分類的指南 | Dentistry - Guidance on the classification of dental devices and accessories (Technical Report CEN/TR 12401:2003) |
| DIN V 6868-151 | X光片質量保證.第151部分:牙科X射線設備驗收檢驗.安裝、維護和修整后照片質量的檢查原則 | Image quality assurance in X-ray diagnostics - Part 151: Acceptance testing of dental radiographic equipment; Rules for the inspection of image quality after installation, maintenance and modification |
| 編號 | 中文名稱 | 英文名稱 |