微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 61223-2-7 | 醫用成像部門的評價及例行試驗 第2-7部分:穩定性試驗 牙科X射線設備(不包括全景設備) | Evaluation and routine testing in medical imaging departments - Part 2-7: Constancy tests - Equipment for intra-oral dental radiography excluding dental panoramic equipment |
| IEC 61223-3-4 | 醫用成像部門的評價及例行試驗 第3-4部分:驗收試驗 牙科X射線設備圖像性能 | Evaluation and routine testing in medical imaging departments - Part 3-4: Acceptance tests - Imaging performance of dental X-ray equipment |
| ISO 10139-1 Technical Corrigendum 1 | 牙科學.活動假牙用軟襯材料.第1部分:短期使用的材料.技術勘誤1 | Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use; Technical Corrigendum 1 |
| ISO 10139-1 | 牙科學.活動義齒用軟襯材料.第1部分:短期材料 | Dentistry - Soft lining materials for removable dentures - Part 1: Materials for short-term use |
| ISO 10139-2 | 牙科學 活動義齒軟襯材料 第2部分:長期使用的材料 | Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use |
| ISO 10271 Technical Corrigendum 1 | 牙科金屬材料.抗腐蝕試驗方法.技術勘誤1 | Dental metallic materials - Corrosion test methods; Technical Corrigendum 1 |
| ISO 10271 | 牙科金屬材料 抗腐蝕試驗方法 | Dental metallic materials - Corrosion test methods |
| ISO 10323 | 牙科旋轉器械 切盤和輪的內徑 | Dental rotary instruments; bore diameters for discs and wheels |
| ISO 10451 | 牙科植入系統.技術文件內容 | Dental implant system - Contents of technical file |
| ISO 10477 | 牙科學.高聚物基的牙冠和齒橋材料 | Dentistry - Polymer-based crown and bridge materials |
| ISO 10637 | 牙科設備 高和中容量抽吸系統 | Dental equipment - High- and medium-volume suction systems |
| ISO 10650-1 | 牙科學.動力聚合活化劑.第1部分:石英鎢鹵素?zé)? | Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps |
| ISO 10650-2 | 牙科學.動力聚合活化劑.第2部分:發光二極管(LED)燈 | Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps |
| ISO 11143 | 牙科設備 汞齊合金分離器 | Dental equipment - Amalgam separators |
| ISO 11144 | 牙科設備 供水及排水管接頭 | Dental equipment - Connections for supply and waste lines |
| ISO 11244 | 牙科釬焊包埋料 | Dental brazing investments |
| ISO 11498 | 牙科手機 牙科用低壓電動機 | Dental handpieces - Dental low-voltage electrical motors |
| ISO 11499 | 牙科學.局部麻醉用一次性盒 | Dentistry - Single-use cartridges for local anaesthetics |
| ISO 11609 | 牙科學 牙膏 要求、試驗方法和標志 | Dentistry - Toothpastes - Requirements, test methods and marking |
| ISO 13294 | 牙科手機 牙鉆氣動機 | Dental handpieces - Dental air-motors |
| ISO 13295 | 牙科學.旋轉器械用心軸 | Dentistry - Mandrels for rotary instruments |
| ISO 13397-2 | 牙科學.牙周刮匙、牙刮器和牙挖器.第2部分:Gr型牙周刮匙 | Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type |
| ISO 13402 | 外科和牙科手持器械 耐蒸氣清毒、耐腐蝕和耐熱性能的測定 | Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure |
| ISO 13716 | 牙科學 可逆和不可逆水解膠體印模材料系統 | Dentistry - Reversible-irreversible hydrocolloid impression material systems |
| ISO 13897 Technical Corrigendum 1 | 牙科學.汞齊合金膠囊.技術勘誤1 | Dentistry - Amalgam capsules; Technical Corrigendum 1 |
| ISO 13897 | 牙科學.汞齊合金膠囊 | Dentistry - Amalgam capsules |
| ISO 14233 | 牙科學.聚合基模具材料 | Dentistry - Polymer-based die materials |
| ISO 14356 | 牙科學.復制材料 | Dentistry - Duplicating material |
| ISO 15087-1 | 牙科起子 第1部分:一般要求 | Dental elevators - Part 1: General requirements |
| ISO 15087-2 | 牙科起子 第2部分:沃里克吉姆斯起子 | Dental elevators - Part 2: Warwick James elevators |
| ISO 15087-3 | 牙科起子 第3部分:CRYER起子 | Dental elevators - Part 3: Cryer elevators |
| ISO 15087-4 | 牙科起子 第4部分:COUPLAND起子 | Dental elevators - Part 4: Coupland elevators |
| ISO 15087-5 | 牙科起子 第5部分:BEIN起子 | Dental elevators - Part 5: Bein elevators |
| ISO 15087-6 | 牙科起子 第6部分:FLOHR起子 | Dental elevators - Part 6: Flohr elevators |
| ISO 15098-1 | 牙科鑷子 第1部分:一般要求 | Dental tweezers - Part 1: General requirements |
| ISO 15098-2 | 牙科鑷子 第2部分:Meriam型 | Dental tweezers - Part 2: Meriam types |
| ISO 15098-3 | 牙科鑷子 第3部分:學院型 | Dental tweezers - Part 3: College types |
| ISO 15606 | 牙科手機 氣動刮器和刮器梢尖 | Dental handpieces - Air-powered scalers and scaler tips |
| ISO 1564 | 牙科瓊脂基水膠仿印模材料 | Dental aqueous impression materials based on agar |
| ISO 1567 AMD 1 | 牙科學.義齒基托聚合物.修改件1 | Dentistry - Denture base polymers; Amendment 1 |
| ISO 1567 | 牙科學 義齒基托聚合物 | Dentistry - Denture base polymers |
| ISO 15841 | 牙科學.畸齒矯正用金屬線 | Dentistry - Wires for use in orthodontics |
| ISO 15854 | 牙科學.鑄型蠟和假牙托塑性材料 | Dentistry - Casting and baseplate waxes |
| ISO 15912 | 牙科.鑄件研究和耐火硬模材料 | Dentistry - Casting investments and refractory die materials |
| ISO 16059 | 牙科學.數據交換用匯編必需的要素 | Dentistry - Required elements for codification used in data exchange |
| ISO 16408 | 牙科學.口腔衛生制品.口腔沖洗 | Dentistry - Oral hygiene products - Oral rinses |
| ISO 16409 | 牙科學.口腔衛生制品.手動牙刷 | Dentistry - Oral hygiene products - Manual interdental brushes |
| ISO 1797-1 AMD 1 | 牙科旋轉器械 柄 第1部分:金屬柄 修改1 | Dental rotary instruments - Shanks - Part 1: Shanks made of metals; Amendment 1 |
| ISO 1797-1 | 牙科旋轉器械 柄 第1部分:金屬柄 | Dental rotary instruments; shanks; part 1: shanks made of metals |
| ISO 1797-2 | 牙科旋轉器械 柄 第2部分:塑料柄 | Dental rotary instruments; shanks; part 2: shanks made of plastics |
| ISO 1942-1 AMD 1 | 牙科詞匯 第1部分:通用及臨床術語 修改1 兩種語言版 | Dental vocabulary; part 1: general and clinical terms; amendment 1 |
| ISO 1942-1 AMD 2 | 牙科詞匯 第1部分:通用及臨床術語 修改2 兩種語言版 | Dental vocabulary; part 1: general and clinical terms; amendment 2 |
| ISO 1942-1 AMD 3 | 牙科詞匯.第1部分:一般和臨床術語.修改件3 | Dental vocabulary; part 1: general and clinical terms; amendment 3 |
| ISO 1942-1 AMD 5 | 牙科詞匯 第1部分:通用及臨床術語 修改5 兩種語言版 | Dental vocabulary; part 1: general and clinical terms; amendment 5 |
| ISO 1942-1 | 牙科詞匯 第1部分:通用及臨床術語 兩種語言版 | Dental vocabulary; part 1: general and clinical terms |
| ISO 1942-2 AMD 1 | 牙科詞匯 第2部分:牙科材料 修改1 兩種語言版 | Dental vocabulary; part 2: dental materials; amendment 1 |
| ISO 1942-2 AMD 2 | 牙科詞匯 第2部分:牙科材料 修改2 兩種語言版 | Dental vocabulary; part 2: dental materials; amendment 2 |
| ISO 1942-2 | 牙科詞匯 第2部分:牙科材料 兩種語言版 | Dental vocabulary; part 2: dental materials |
| ISO 1942-3 AMD 1 | 牙科詞匯 第3部分:牙科器械 修改1 兩種語言版 | Dental vocabulary; part 3: dental instruments; amendment 1 |
| ISO 1942-3 AMD 2 | 牙科詞匯 第3部分:牙科器械 修改2 兩種語言版 | Dental vocabulary; part 3: dental instruments; amendment 2 |
| ISO 1942-3 | 牙科詞匯 第3部分:牙科器械 兩種語言版 | Dental vocabulary; part 3: dental instruments |
| ISO 1942-4 AMD 1 | 牙科詞匯 第4部分:牙科設備 修改1 兩種語言版 | Dental vocabulary; part 4: dental equipment; amendment 1 |
| ISO 1942-4 | 牙科詞匯 第4部分:牙科設備 兩種語言版 | Dental vocabulary; part 4: dental equipment |
| ISO 1942-5 | 牙科詞匯 第5部分:試驗術語 兩種語言版 | Dental vocabulary; part 5: terms associated with testing |
| ISO 20126 | 牙科學.手動牙刷.一般要求和試驗方法 | Dentistry - Manual toothbrushes - General requirements and test methods |
| ISO 20127 | 牙科.電動牙刷.一般要求和試驗方法 | Dentistry - Powered toothbrushes - General requirements and test methods |
| ISO 21530 | 牙科學.牙科設備表面用材料.耐化學消毒劑的測定 | Dentistry - Materials used for dental equipment surfaces - Determination of resistance to chemical disinfectants |
| ISO 21533 | 牙科.韌帶內注射用可重復使用的管式注射器 | Dentistry - Reusable cartridge syringes intended for intraligamentary injections |
| ISO 2157 | 牙科旋轉器械 公稱直徑和命名代碼 | Dental rotary instruments; nominal diameters and designation code number |
| ISO 21606 | 牙科學.正畸學用彈性體輔助裝置 | Dentistry - Elastomeric auxiliaries for use in orthodontics |
| ISO 21671 | 牙科學.旋轉拋光器 | Dentistry - Rotary polishers |
| ISO 22112 | 牙科學.牙修復術用假牙 | Dentistry - Artificial teeth for dental prostheses |
| ISO 22254 | 牙科學.手動牙刷.毛刷部分耐彎曲性能 | Dentistry - Manual toothbrushes - Resistance of tufted portion to deflection |
| ISO 22374 | 牙科學.牙鉆手柄.電動刮器和刮器梢頭 | Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips |
| ISO 22674 | 牙科.固定式和可摘式修復體和牙科器具用金屬材料 | Dentistry - Metallic materials for fixed and removable restorations and appliances |
| ISO 22794 | 牙科學.口腔和上頜面外科中骨填充物和增加物用植入材料.技術文檔內容 | Dentistry - Implantable materials for bone filling and augmentation in oral and maxillofacial surgery - Contents of a technical file |
| ISO 22803 | 牙科學.口腔及頜面外科中受控制的組織再生用薄膜材料.技術文檔的內容 | Dentistry - Membrane materials for guided tissue regeneration in oral and maxillofacial surgery - Contents of a technical file |
| ISO 24234 | 牙科學.牙科汞齊合金用汞及合金 | Dentistry - Mercury and alloys for dental amalgam |
| ISO 3107 Technical Corrigendum 1 | 牙科.氧化鋅/丁香酚和氧化鋅/不含丁香酚的氧化鋅粘固粉.技術勘誤1 | Dentistry - Zinc oxide/eugenol and zinc oxide/non-eugenol cements; Technical Corrigendum 1 |
| ISO 3107 | 牙科學.氧化鋅/丁香酚及不含丁香酚的氧化鋅粘固粉 | Dentistry - Zinc oxide/eugenol and zinc oxide/non-eugenol cements |
| ISO 3665 | 攝影 牙科用射線照相膠片 規范 | Photography - Intra-oral dental radiographic film - Specification |
| ISO 3823-1 | 牙科旋轉器械 牙鉆 第1部分:不銹鋼牙鉆和硬質合金牙鉆 | Dental rotary instruments - Burs - Part 1: Steel and carbide burs |
| ISO 3823-2 | 牙科.旋轉牙鉆器械.第2部分:精加工牙鉆 | Dentistry - Rotary bur instruments - Part 2: Finishing burs |
| ISO 3950 | 牙科學.牙齒和口腔區的名稱與符號體系 | Dentistry - Designation system for teeth and areas of the oral cavity |
| ISO 3964 | 牙科手機 連接尺寸 | Dental handpieces; Coupling dimensions |
| ISO 4049 | 牙科學 聚合物基充填、修復及粘接材料 | Dentistry - Polymer-based filling, restorative and luting materials |
| ISO 4073 | 牙科設備 牙科治療室設備項目 識別體系 | Dental equipment; Items of dental equipment at the working place; Identification system |
| ISO 4823 AMD 1 | 牙科學.彈性印模材料.修改件1 | Dentistry - Elastomeric impression materials; Amendment 1 |
| ISO 4823 Technical Corrigendum 1 | 牙科學.彈性印模材料.技術勘誤1 | Dentistry - Elastomeric impression materials; Technical Corrigendum 1 |
| ISO 4823 | 牙科學 彈性體印模材料 | Dentistry - Elastomeric impression materials |
| ISO 5799 | 攝影 醫用和牙科用直接爆光射線攝影膠片/處理系統 ISO感光速度和ISO平均梯度的測定 | Photography; direct-exposing medical and dental radiographic film/process systems; determination of ISO speed and ISO average gradient |
| ISO 6360-1 Technical Corrigendum 1 | 牙科.旋轉儀器的數字編碼系統.第1部分:一般特性.技術勘誤1 | Dentistry - Number coding system for rotary instruments - Part 1: General characteristics; Technical Corrigendum 1 |
| ISO 6360-1 | 牙科學.牙科旋轉器械的數字編碼體系.第1部分:一般特性 | Dentistry - Number coding system for rotary instruments - Part 1: General characteristics |
| ISO 6360-2 | 牙科學.旋轉器械用數字編碼體系.第2部分:形狀 | Dentistry - Number coding system for rotary instruments - Part 2: Shapes |
| ISO 6360-3 | 牙科學.旋轉器械的數字編碼系統.第3部分:磨石和刀具的具體特性 | Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters |
| ISO 6360-4 | 牙科學.旋轉器械的數字編碼體系.第4部分:金剛石器械的具體特性 | Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments |
| ISO 6360-6 | 牙科學.旋轉器械的數字編碼體系.第6部分:研磨器械的具體特性 | Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments |
| ISO 6360-7 | 牙科學.旋轉器械的數字編碼體系.第7部分:心軸和特殊器械的具體特性 | Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments |
| ISO 6872 AMD 1 | 牙科陶瓷.修改件1 | Dental ceramic; Amendment 1 |
| ISO 6872 | 牙科烤瓷 | Dental ceramic |
| ISO 6873 | 牙科石膏制品 | Dental gypsum products |
| ISO 6874 | 牙科學.聚合物基窗溝封閉劑 | Dentistry - Polymer-based pit and fissure sealants |
| ISO 6875 | 牙科病人用椅 | Dental patient chair |
| ISO 6876 | 牙科牙根管充填材料 | Dental root canal sealing materials |
| ISO 6877 | 牙科.牙根管牙膠尖 | Dentistry - Root-canal obturating points |
| ISO 7405 | 牙科學 用于牙科的醫療器械生物相容性臨床前評價 牙科材料的試驗方法 | Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods for dental materials |
| ISO 7488 | 牙科銀汞合金攪拌器 | Dental amalgamators |
| ISO 7491 | 牙科材料 色穩定性的測定 | Dental materials - Determination of colour stability |
| ISO 7492 | 牙科探針 | Dental explorers |
| ISO 7493 | 牙科.醫生凳 | Dentistry - Operator's stool |
| ISO 7494-1 | 牙科學.牙科裝置.第1部分:一般要求和試驗方法 | Dentistry - Dental units - Part 1: General requirements and test methods |
| ISO 7494-2 | 牙科學.牙科綜合治療設備.第2部分:供水和供氣 | Dentistry - Dental units - Part 2: Water and air supply |
| ISO 7551 | 牙科吸水捻 | Dental absorbent points |
| ISO 7711-1 | 牙科旋轉器械 金鋼鉆器械 第1部分:尺寸、要求、標記和包裝 | Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging |
| ISO 7711-2 | 牙科旋轉器械 金剛鉆器械 第2部分:切盤 | Dental rotary instruments; diamond instruments; part 2: discs |
| ISO 7711-3 | 牙科學.旋轉器械用金剛鉆器械.第3部分:磨粒尺寸、標注與彩色編碼 | Dentistry - Diamond rotary instruments - Part 3: Grit sizes, designation and colour code |
| ISO 7785-1 | 牙科手機 第1部分:高速氣動渦輪手機 | Dental handpieces - Part 1: High-speed air turbine handpieces |
| ISO 7785-2 | 牙科手機 第2部分:直角和彎角手機 | Dental handpieces - Part 2: Straight and geared angle handpieces |
| ISO 7786 | 牙科旋轉器械 技工室用研磨器械 | Dental rotary instruments - Laboratory abrasive instruments |
| ISO 7787-1 | 牙科旋轉器械 切割刀具 第1部分:技工室用鋼質刀具 | Dental rotary instruments; Cutters; Part 1 : Steel laboratory cutters |
| ISO 7787-2 | 牙科旋轉器械 切割刀具 第2部分:技工室用硬質合金刀具 | Dental rotary instruments - Cutters - Part 2: Carbide laboratory cutters |
| ISO 7787-3 | 牙科旋轉器械 切割工具 第3部分:技工室研磨機用硬質合金刀具 | Dental rotary instruments; cutters; part 3: carbide laboratory cutters for milling machines |
| ISO 7787-4 | 牙科用旋轉器械.切割刀具.第1部分:實驗室用小型硬質合金刀具 | Dental rotary instruments - Cutters - Part 4: Miniature carbide laboratory cutters |
| ISO 7885 | 一次性牙科直接注射針頭 | Sterile dental injection needles for single use |
| ISO 8282 | 牙科設備 汞及合金混合器和調和器 | Dental equipment - Mercury and alloy mixers and dispensers |
| ISO 8325 | 牙科.旋轉器械試驗方法 | Dentistry - Test methods for rotary instruments |
| ISO 9168 | 牙科手機 軟管連接件 | Dental handpieces; hose connectors |
| ISO 9173-1 | 牙科.拔牙鉗.第1部分:一般要求和試驗方法 | Dentistry - Extraction forceps - Part 1: General requirements and test methods |
| ISO 9333 | 牙科.上光材料 | Dentistry - Brazing materials |
| ISO 9680 | 牙科.工作燈 | Dentistry - Operating lights |
| ISO 9687 | 牙科設備 圖形符號 | Dental equipment; graphical symbols |
| ISO 9693 AMD 1 | 牙科金屬烤瓷修復系統.修改件1 | Metal-ceramic dental restorative systems; Amendment 1 |
| ISO 9693 | 牙科金屬烤瓷修復系統 | Metal-ceramic dental restorative systems |
| ISO 9873 Technical Corrigendum 1 | 牙科手持器械 可重復使用的鏡子和手柄 技術勘誤1 | Dental hand instruments - Reusable mirrors and handles; Technical Corrigendum 1 |
| ISO 9873 | 牙科手持器械 可重復使用的鏡子和手柄 | Dental hand instruments - Reusable mirrors and handles |
| ISO 9917-1 | 牙科學.水基粘結劑.第1部分:粉末/液體酸基粘結劑 | Dentistry - Water-based cements - Part 1: Powder/liquid acid-base cements |
| ISO 9917-2 | 牙科水基膠粘劑 第2部分:光固化膠粘劑 | Dental water-based cements - Part 2: Light-activated cements |
| ISO 9997 | 牙科卡式注射器 | Dental cartridge syringes |
| ISO/TR 11175 | 牙科植入物 研制牙科植入物指南 | Dental implants; guidelines for developing dental implants |
| ISO/TR 14569-1 | 牙科材料.磨損試驗指南.第1部分:牙刷磨損 | Dental materials - Guidance on testing of wear - Part 1: Wear by toothbrushing |
| ISO/TR 15300 | 牙科學 OSI臨床編碼規則在牙科產品分類和編碼中的應用 | Dentistry - Application of OSI clinical codification to the classification and coding of dental products |
| ISO/TR 15599 Technical Corrigendum 1 | 牙科實驗室規程的數字化編纂.技術勘誤1 | Digital codification of dental laboratory procedures; Technical Corrigendum 1 |
| ISO/TR 15599 | 牙科實驗室規程的數字化編撰 | Digital codification of dental laboratory procedures |
| ISO/TS 11405 | 牙科材料.牙齒結構的附著力試驗 | Dental materials - Testing of adhesion to tooth structure |
| ISO/TS 14569-2 | 牙科材料 耐磨損試驗指南 第2部分：2和/或3體磨耗法 | Dental materials - Guidance on testing of wear - Part 2: Wear by two- and/or three body contact |
| ISO/TS 17576 | 牙科學.汞齊合金的腐蝕試驗 | Dentistry - Corrosion tests for amalgam |
| ISO/TS 22595-1 | 牙科.廠區面積設備.第1部分:吸入系統 | Dentistry - Plant area equipment - Part 1: Suction systems |
| ISO/TS 22911 | 牙科學.牙科植入系統的臨床前評定.動物試驗法 | Dentistry - Preclinical evaluation of dental implant systems - Animal test methods |
| 編號 | 中文名稱 | 英文名稱 |