微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| CWA 14646 | 預應力結構柱式拉緊工具安裝的要求和專家公司及人員的資格 | Requirements for the installation of post-tensioning kits for prestressing of structures and qualification of the specialist company and its personnel |
| EN 12549 | 聲學 緊固件驅動工具的噪聲試驗規則 工程法 | Acoustics - Noise test code for fastener driving tools - Engineering method |
| EN 13089 | 登山設備 攀冰工具 安全要求和試驗方法 | Mountaineering equipment - Ice-tools - Safety requirements and test methods |
| EN 13985 | 機械工具 安全 剪板機 | Machine tools - Safety - Guillotine shears |
| EN 2591-506 | 航空航天系列 光電連接元件 試驗方法 第506部分：工具的使用 | Aerospace series - Elements of electrical and optical connection; Test methods - Part 506: Use of tools |
| EN 27787-1-1990+AC1 | 牙科旋轉器械 切割工具 第1部分：技工室用鋼質刀具 | Dentistry; dental rotary instruments; cutters; part 1: steel laboratory cutters (ISO 7787-1:1984) |
| EN 27787-3 | 牙科旋轉器械 切割工具 第3部分：技工室研磨機用質合金刀具 | Dental rotary instruments; Cutters; Part 3: Carbide laboratory cutters for milling machines (ISO 7787-3:1991) |
| EN 28662-1 | 便攜式手提動力工具 手柄振動測量 第1部分：總則 | Hand-held portable power tools; Measurement of vibrations at the handle; Part 1: General (ISO 8662-1:1988) |
| EN 28662-2-1994+A1-1995+A2 | 便攜式手提動力工具 手柄振動測量 第2部分：鑿錘和鉚釘錘 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers (ISO 8662-2:1992) |
| EN 28662-3-1994+A1-1995+A2 | 便攜式手提動力工具 手柄振動測量 第3部分：巖石鉆頭和旋轉錘 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers (ISO 8662-3:1992) |
| EN 28662-5-1994+A1-1995+A2 | 便攜式手提動力工具 手柄振動測量 第5部分：施工用路面軋碎機和錘 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 5: Pavement breakers and hammers for construction work (ISO 8662-5:1992) |
| EN 301002-1 V 1.2.3 | 綜合業務數字網（ISDN） 安全工具（SET）程序 1號數字用戶信令系統（DSS1）協議 第1部分：協議規范 | Integrated Services Digital Network (ISDN) - Security tools (SET) procedures - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 1: Protocol specification |
| EN 301002-2 V 1.2.3 | 綜合業務數字網（ISDN） 安全工具（SET）程序 1號數字用戶信令系統（DSS1）協議 第2部分：協議實現一致 | Integrated Services Digital Network (ISDN) - Security tools (SET) procedures - Digital Subscriber Signalling System No. one (DSS1) protocol - Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification |
| EN 301132 V 1.1.1 | 綜合業務數字網（ISDN） 電信業務中用的安全工具（SET） | Integrated Services Digital Network (ISDN) - Security tools (SET) for use within telecommunication services |
| EN 393-1993+A1 | 救生衣和個人浮力工具 50N浮力工具 | Lifejackets and personal buoyancy aids - Buoyancy aids - 50 N |
| EN 394 | 救生衣和個人浮力工具 附加零件 | Lifejackets and personal buoyancy aids - Additional items |
| EN 395-1993+A1 | 救生衣和個人浮力工具 100N救生衣 | Lifejackets and personal buoyancy aids - Lifejackets - 100 N |
| EN 396-1993+A1 | 救生衣和個人浮力工具 150N救生衣 | Lifejackets and personal buoyancy aids - Lifejackets - 150 N |
| EN 399-1993+A1-1998+AC | 救生衣和個人浮力工具 275N救生衣 | Lifejackets and personal bouyancy aids; lifejackets; 275 N |
| EN 50109-1 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第1部分：一般要求和試驗 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 1: General requirements and tests |
| EN 50109-2-1 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-1部分：射頻連接器和同軸接觸器的手工壓接工具 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-1: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with fixed dies,sies A to E,V and W |
| EN 50109-2-2 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-2部分：射頻連接器和同軸接觸器的手動壓接工具 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-2: Particular requirements for radio frequency connectors and concentric contacts - Open throat tools with removadle and inter-changeadle dies,size A to G,Q to T,V and W |
| EN 50109-2-3 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-3部分：電器插接連接件觸點的特殊要求 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
| EN 50109-2-4 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-4部分：SMZ系列高頻插接連接的中間接點的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ |
| EN 50109-2-5 | 手動壓接工具 低頻和射頻用電線和電纜壓接連接用工具 第2-5部分：數據總線用帶2個內芯的電纜連接的特殊要 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
| EN 50144-1-1998+A1-2002+A2 | 手持電動工具的安全 第1部分：一般要求 | Safety of hand-held electric motor operated tools - Part 1: General requirements |
| EN 50144-2-13 | 手持電動工具的安全性 第2-13部分：鏈鋸的特殊要求 | Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws |
| EN 50144-2-15 | 手持電動工具的安全性 第2-15部分：樹籬修整機的特殊要求 | Safety of hand-held electric motor operated tools - Part 2-15: Particular requirements for hedge trimmers |
| EN 50144-2-16 | 手持電動電子工具的安全 第2-16部分：釘釘器的特殊要求 | Safety of hand-held electric motor operated tools - Part 2-16: Particular requirements for tackers |
| EN 50144-2-3 | 手持電動工具的安全性 第2-3部分：研磨機、圓盤磨光機和拋光機的特殊要求 | Safety of hand-held electric motor operated tools - Part 2-3: Particular requirements for grinders, disk type sanders and polishers |
| EN 50144-2-7 | 手持電動工具的安全 第2-7部分：噴槍的特殊要求 | Safety of hand-held electric motor operated tools - Part 2-7: Particular requirements for spray guns |
| EN 50260-2-7 | 手持電池供電的電動工具及電池組的安全性 第2-7部分：噴射槍的特殊要求 | Safety of hand-held battery-powered motor-operated tools and battery packs - Part 2-7: Particular requirements for spray guns |
| EN 55014-1-2000+A1-2001+A2 | 電磁兼容性 家用電器、電動工具和類似器具的要求 第1部分：發射 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (CISPR 14-1:2000) |
| EN 55014-2-1997+A1 | 電磁兼容性 家用電器、電動工具和類似器具的要求 第2部分：抗擾度 產品族標準 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity product family standard (CISPR 14-2:1997) |
| EN 60335-2-45 | 家用和類似用途電器的安全 第2-45部分：便攜式電熱工具及其類似電器的特殊要求 | Household and similar electrical appliances -Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances (IEC 60335-2-45:2002) / Note: Endorsement notice |
| EN 60743 | 帶電作業用工具和設備術語 | Live working - Terminology for tools, equipment and devices (IEC 60743:2001) |
| EN 60745-1 | 手持式電動工具 安全 第1部分：通用要求 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements (IEC 60745-1:2001, modified) |
| EN 60745-2-1 | 手持電動工具 安全 第2-1部分：鉆和沖擊鉆的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for drills and impact drills (IEC 60745-2-1:2003, modified) |
| EN 60745-2-11 | 手持電動工具 安全 第2-10部分：往復鋸（線鋸和刀鋸）的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for reciprocating saws (jigs and sabre saws) (IEC 60745-2-11:2003, modified) |
| EN 60745-2-14 | 手持電動工具 安全 第2-14部分：刨機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for planers (IEC 60745-2-14:2003, modified) |
| EN 60745-2-17 | 手持電動工具 安全 第2-17部分：刳刨機和修剪機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for routers and trimmers (IEC 60745-2-17:2003, modified) |
| EN 60745-2-2 | 手持電動工具 安全 第2-2部分：改錐和套筒扳手的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for screwdrivers and impact wrenches (IEC 60745-2-2:2003, modified) |
| EN 60745-2-20 | 手持式電動工具 安全 第2-20部分：帶鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for band saws (IEC 60745-2-20:2003, modified) |
| EN 60745-2-4 | 手持電動工具 安全 第2-4部分：除圓盤型以外的磨光機和拋光機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type (IEC 60745-2-4:2002, modified) |
| EN 60745-2-5 | 手持電動工具 安全 第2-5部分：圓形鋸的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws (IEC 60745-2-5:2003, modified) |
| EN 60745-2-6 | 手持電動工具 安全 第2-6部分：鐵錘的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for hammers (IEC 60745-2-6:2003, modified) |
| EN 60745-2-8 | 手持電動工具 安全 第2-8部分：剪床和步?jīng)_輪廓機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers (IEC 60745-2-8:2003, modified) |
| EN 60745-2-9 | 手持電動工具 安全 第2-9部分：攻絲機的特殊要求 | Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers (IEC 60745-2-9:2003, modified) |
| EN 60832 | 帶電作業用絕緣桿（絕緣棒）及通用工具附件（金具） | Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working (IEC 60832:1988, modified) |
| EN 60900-1993+A1-1995+A11-1997+A12 | 在交流電1000V和直流電1500V的情況下帶電作業用的手工工具 | Hand tools for live working up to 1000 V a.c. and 1500 V d.c. (IEC 60900:1987, modified) |
| EN 61029-1-2000+A11-2003+A12 | 移動式電動工具的安全 第1部分：一般要求 | Safety of transportable motor-operated electric tools - Part 1: General requirements (IEC 61029-1:1990, modified) |
| EN 61029-2-1 | 移動式電動工具的安全 第2－1部分：圓鋸的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993 + A1:1999 + A2:2001, modified) |
| EN 61029-2-4-2003+A1 | 移動式電動工具的安全 第２－４部分：臺式沙輪機的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders (IEC 61029-2-4:1993, modified) |
| EN 61029-2-5 | 移動式電動工具的安全 第2-5部分：帶狀鋸的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993 + A1:2001, modified) |
| EN 61029-2-9 | 移動式電動工具的安全 第2-9部分：斜切鋸的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, modified) |
| EN 61347-2-5 | 燈的控制裝置 第2-5部分：公共運輸工具照明用直流電子鎮流器的特殊要求 | Lamp controlgear - Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting (IEC 61347-2-5:2000) |
| EN 61477 | 帶電作業 利用工具、裝置和設備的最低要求 | Live working - Minimum requirements for the utilization of tools, devices and equipment (IEC 61477:2001) / Note: Endorsement notice |
| EN 693 | 機械工具 安全 液壓壓力機 | Machine tools - Safety - Hydraulic presses |
| EN 792-1 | 手持式非電動工具 安全要求 第1部分：非螺紋機械緊固件用組裝動力工具 | Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners |
| EN 792-10 | 手持式非電動工具 安全要求 第10部分：壓縮動力工具 | Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools |
| EN 792-11 | 手持式非電動工具 安全要求 第11部分：毛坯下料機和剪切機 | Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears |
| EN 792-12 | 手持式非電動工具 安全要求 第12部分：小循環、小振蕩和往復式鋸 | Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws |
| EN 792-13 | 手持式非電動工具 安全要求 第13部分：緊固件傳動工具 | Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools |
| EN 792-2 | 手持式非電動工具 安全要求 第2部分：切割和卷邊動力工具 | Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools |
| EN 792-3 | 手持式非電動工具 安全要求 第3部分：鉆孔機和攻絲機 | Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers |
| EN 792-4 | 手持式非電動工具 安全要求 第4部分：非旋轉沖擊動力工具 | Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools |
| EN 792-5 | 手持式非電動工具 安全要求 第5部分：旋轉式?jīng)_擊鉆孔機 | Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills |
| EN 792-6 | 手持式非電動工具 安全要求 第6部分：螺紋緊固件用組裝動力工具 | Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners |
| EN 792-7 | 手持式非電動工具 安全要求 第7部分：研磨機 | Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
| EN 792-8 | 手持式非電動工具 安全要求 第8部分：拋光機和磨沙機 | Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers |
| EN 792-9 | 手持式非電動工具 安全要求 第9部分：硬模研磨機 | Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
| EN 847-1-1997+AC | 木工工具 安全要求 第1部分：銑工具和圓鋸刀片 | Tools for woodworking - Safety requirements - Part 1: Milling tools and circular saw blades / Note: To be replaced by prEN 847-1 (2003-05). |
| EN 847-2-2001+AC | 木工工具 安全要求 第2部分：裝配手柄的銑工具的手柄的要求 | Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools |
| EN 848-1-1998+A1 | 木工機械的安全 帶旋轉工具的單邊制模機 第1部分：單軸立式制模機 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
| EN 848-2 | 木工機械的安全 帶旋轉工具的單邊制模機 第2部分：單軸手工加料/綜合加料機 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle handfed/integrated fed routing machines |
| EN 848-3 | 木工機械的安全 帶旋轉工具的單邊制模機 第3部分：數控(NC)鏜床和特形銑床 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines |
| EN ISO 11715-1 | 眼科光學 眼鏡鏡片剖面數據傳送用數字?jǐn)?shù)據文件的格式 第1部分：二維描繪工具 | Ophthalmic optics - Format of digital data files for data transfer for profiling of spectacle lenses - Part 1: Two-dimensional tracers (ISO 11715-1:1998) |
| EN ISO 15744 | 手持非電動工具 噪聲測量規則 工程法(2級) | Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2) (ISO 15744:2002) |
| EN ISO 17776 | 石油和天然氣工業 海上生產裝置 危險識別和風險評定用工具和技術的指南 | Petroleum and natural gas industries - Offshore production installations - Guidelines on tools and techniques for hazard identification and risk assessment (ISO 17776:2000) |
| EN ISO 4957 | 工具鋼 | Tool steels (ISO 4957:1999) |
| EN ISO 6789 | 螺釘和螺母裝配工具 手動扭矩工具 設計的一致性試驗、質量的一致性試驗和重新校準程序的條件和試驗方法 | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure (ISO 6789:2003) |
| EN ISO 8504-3 | 涂裝油漆和有關產品前鋼材預處理 表面預處理方法 第3部分：手工和動力工具清洗 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning (ISO 8504-3:1993) |
| EN ISO 8662-10 | 便攜式手提動力工具 手柄振動測量 第10部分：沖剪與剪切 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 10: Nibblers and shears (ISO 8662-10:1998) |
| EN ISO 8662-12 | 便攜式手提動力工具 手柄振動測量 第12部分：往復式鋸和銼以擺動或旋轉式鋸 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action (ISO 8662-12:1997) |
| EN ISO 8662-13 | 便攜式手提動力工具 手柄振動測量 第13部分：模具研磨機 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 13: Die grinders (ISO 8662-13:1997) |
| EN ISO 8662-14 | 便攜式手提動力工具 手柄振動測量 第14部分：采石工具和針束除銹機 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 14: Stone-working tools and needle scalers (ISO 8662-14:1996) |
| EN ISO 8662-2/prA2 | 便攜式手提動力工具 手柄振動測量 第2部分：鑿錘和鉚釘錘 修改2 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 2: Chipping hammers and riveting hammers; Amendment 2 (ISO 8662-2:1992/AMD 1:1999) |
| EN ISO 8662-3/prA2 | 便攜式手提動力工具 手柄振動測量 第3部分：巖石鉆頭和旋轉錘 修改2 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 3: Rock drills and rotary hammers; Amendment 2 (ISO 8662-3:1992/AMD 1:1999) |
| EN ISO 8662-4 | 便攜式手提動力工具 手柄振動測量 第4部分：磨床 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 4: Grinders (ISO 8662-4:1994) |
| EN ISO 8662-6 | 便攜式手提動力工具 手柄振動測量 第6部分：沖擊鉆 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 6: Impact drills (ISO 8662-6:1994) |
| EN ISO 8662-7 | 便攜式手提動力工具 手柄振動測量 第7部分：具有沖擊、脈沖或棘輪作用力的扳手、螺絲刀和擰螺母機 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action (ISO 8662-7:1997) |
| EN ISO 8662-8 | 便攜式手提動力工具 手柄振動測量 第8部分：拋光機和旋轉式軌道和特殊軌道磨光機 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 8: Polishers and rotary, orbital and random orbital sanders (ISO 8662-8:1997) |
| EN ISO 8662-9 | 便攜式手提動力工具 手柄振動測量 第9部分：汽錘 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 9: Rammers (ISO 8662-9:1996) |
| HD 400.3K S1 | 手持式電動工具 第2部分：特殊規范 K節：混凝土振動器 | Hand-held motor operated tools- Part 2: Particular specifications- Section K: Concrete vibrators |
| HD 400.3N S2 | 手持式電動工具 第2部分：特殊規范 N節：樹籬修枝剪和剪草機 | Hand-held motor operated tools; part 2: particular specifications; section N: hedge trimmers and scissor-type grass shears (CEE 20-2N:1977, modified) |
| prEN 12101-4 | 煙和熱控制系統 第4部分：火和煙霧控制裝置 工具 | Smoke and heat control systems - Part 4: Fire and smoke control installations; Kits |
| prEN 12101-6 | 煙和熱控制系統 第6部分：壓差系統 工具 | Smoke and heat control systems - Part 6: Pressure differential systems; Kits |
| prEN 12366 | 聲學 手持式非電動工具噪聲測試規程 工程法（二級） | Acoustics - Noise test code for hand-held non-electric power tools - Engineering method (grade 2) |
| prEN 12984 | 食品加工機械 便攜式和/或手動機械及配備機械驅動切削工具的設備 安全和衛生要求 | Food processing machinery - Portable and/or hand-operated machines and appliances equipped with mechanically driven cutting tools - Safety and hygiene requirements |
| prEN 13204 | 用于消防和營救服務的雙重作用液壓救援工具 | Double acting hydraulic rescue tools for fire and rescue service use |
| prEN 14448 | 大規模生產中熱塑性模塑料的熱工具焊接 | Heated tool welding of thermoplastics mouldings in mass production |
| prEN 50106-2-45 | 標準圖表：在EN 60335-2-45標準范圍內的便攜式電熱工具及其類似電器的附加常規試驗 | Standard sheet: Additional routine tests for portable electric heating tools and similar appliances within the scope of EN 60335-2-45 |
| prEN 50188 | 電動工具 環行鋸工作臺 安全要求和測試 | Electric motor-operated tools; tables for circular saws; safety requirements and tests |
| prEN 50260-2-8 | 手持電池供電的電動工具及電池包的安全性 第2-8部分：金屬板大剪刀和毛坯下料機的特殊要求 | Safety of hand-held battery-powered motor-operated tools and battery packs - Part 2-8: Particular requirements for sheet metal shears and nibblers |
| prEN 60745-2-12 | 手持式電動工具的安全 第２－１２部分：混凝土震動器的特殊要求 草案 | IEC 60745-2-12, Ed. 2: Safety of hand-held motor-operated electric tools - Part 2-12: Particular requirements for concrete vibrators |
| prEN 60745-2-18 | 手持式電動工具的安全 第２－１８部分：打包工具的特殊要求 草案 | Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for strapping tools (IEC 60745-2-18:2003, modified) |
| prEN 60745-2-19 | 手持式電動工具的安全 第２－１９部分：長刨的特殊要求 草案 | Safety of hand-held motor-operated electric tools - Part 2-19: Particular requirements for jointers |
| prEN 60745-2-21 | 手持式電動工具的安全 第２－２１部分：排水溝清理機的特殊要求 草案 | IEC 60745-2-21, Ed. 1.0: Safety of hand-held motor-operated electric tools - Part 2-21: Particular requirements for drain cleaners |
| prEN 61029-2-11 | 移動式電動工具的安全 第２－１１部分：４５度角斜面接口椅的特殊要求 | Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws (IEC 61029-2-11:2001, modified) |
| prEN 61029-2-2 | 移動式電動工具的安全 第２－２部分：旋臂鋸的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for radial arm saws (IEC 61029-2-2:1993, modified) |
| prEN 61029-2-3 | 移動式電動工具的安全 第２－３部分：刨和刨板機的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for planers and thicknessers (IEC 61029-2-3:1993, modified) |
| prEN 61029-2-6 | 移動式電動工具的安全 第２－６部分：注水金剛石鉆的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond drills with water supply |
| prEN 61029-2-7 | 移動式電動工具的安全 第２－７部分：注水金剛石鋸的特殊要求 | Safety of transportable motor-operated electric tools; part 2: particular requirements for diamond saws with water supply |
| prEN 61029-2-8 | 移動式電動工具的安全 第２－８部分：單芯軸垂直模壓機的特殊要求 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995 + A1:1999 + A2:2001, modified) |
| prEN 792-14 | 手持式非電動工具 安全要求 第14部分：非螺紋機械緊固件用組裝動力工具 | Hand-held non electric power tools - Safety requirements - Part 14: Assembly power tools for non-threaded mechanical fasteners |
| prEN 792-15 | 手持式非電動工具 安全要求 第15部分：切割和卷邊動力工具 | Hand-held non electric power tools - Safety requirements - Part 15: Cutting-off and crimping power tools |
| prEN 847-3 | 木工工具 緊固裝置 第3部分：安全要求 | Tools for woodworking - Clamping devices - Part 3: Safety requirements |
| 編號 | 中文名稱 | 英文名稱 |