微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS A8905 | 施工機械.維修刀具.維護和調節用手工工具 | Construction machinery -- Service tools -- Hand tools for maintenance and adjustment works |
| JIS B4003 | 機床工具.刀柄用自動夾緊錐度 | Machine tools -- Self-holding tapers for tool shanks |
| JIS B4120 | 切削工具轉位刀片.標識 | Indexable inserts for cutting tools -- Designation |
| JIS B4134 | 單刃金剛石砂輪修整工具 | Single point diamond dressing tools |
| JIS B4140 | 金剛石/CBN產品.金剛石或CBN電鍍工具 | Diamond/CBN products -- Diamond or CBN electroplated tools |
| JIS B5007 | 沖壓工具.導柱及導襯 | Tools for pressing -- Guide posts and guide bushes |
| JIS B5009 | 沖壓工具.帶圓柱形頭和縮減柄的沖頭 | Tools for pressing -- Punches with cylindrical head and reduced shank |
| JIS B5012 | 沖壓工具.盤簧 | Tools for pressing -- Coiled helical spring |
| JIS B6336-9 | 多工序自動數控機床（加工中心）的試驗條件.第9部分:工具更換和底板更換操作時間的評估 | Test conditions for machining centres -- Part 9: Evaluation of the operating times of tool change and pallet change |
| JIS B7762-1 | 便攜式手提動力工具.手柄振動的測量.第1部分:總則 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 1: General |
| JIS B7762-10 | 手持便攜式電動工具.手柄部位振動的測量.第10部分:步?jīng)_輪廓機和剪切機械 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 10: Nibblers and shears |
| JIS B7762-11 | 便攜式手提動力工具.手柄振動測量.第11部分:接合件傳動工具 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 11: Fastener driving tools |
| JIS B7762-12 | 便攜式手提動力工具.手柄振動測量.第12部分:受往復作用的鋸和銼和受擺動或旋轉作用的鋸 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 12: Saws and files with reciprocating action and saws with oscillating or rotating action |
| JIS B7762-13 | 手持便攜式動力工具.手柄振動力的測量.第13部分:模具打磨機 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 13: Die grinders |
| JIS B7762-14 | 便攜式手提動力工具.手柄機械振動測量.第14部分:石料加工機和針式標定器 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 14: Stone-working tools and needle scalers |
| JIS B7762-2 | 手持便攜式動力工具.手柄振動測量方法.第2部分:鏟和鉚釘機 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 2: Chipping hammers and riveting hammers |
| JIS B7762-3 | 便攜式手持動力工具.手柄處振動測量.第3部分:巖石鉆頭和旋轉錘 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 3: Rock drills and rotary hammers |
| JIS B7762-4 | 便攜式手提動力工具.手柄振動測量.第4部分:磨床 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 4: Grinders |
| JIS B7762-5 | 便攜式手提動力工具.手柄振動測量.第5部分:施工用路面軋碎機和錘. | Hand-held portable power tools -- Measurement of vibration at the handle -- Part 5: Pavement breakers and hammers for construction work |
| JIS B7762-6 | 便攜式手提動力工具.手柄振動的測量.第6部分:沖擊式鉆機 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 6: Impact drills |
| JIS B7762-7 | 便攜式手提動力工具.手柄振動測量.第7部分:扳手、旋具和具有沖擊、推力或棘齒作用的螺母旋具 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 7: Wrenches, screwdrivers and nut runners with impact, impulse or ratchet action |
| JIS B7762-8 | 便攜式手提動力工具.手柄振動測量.第8部分:拋光機和旋轉式軌道和特殊軌道磨光機 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 8: Polishers and rotary, orbital and random orbital sanders |
| JIS B7762-9 | 便攜式手提動力工具.手柄振動測量.第9部分:汽錘 | Hand-held portable power tools -- Measurement of vibrations at the handle -- Part 9: Rammers |
| JIS C5402-15-8 | 電子設備連接器.試驗和測量.第15-8部分:連接器試驗(機械的).試驗15h:觸電限動系統的耐工具使用性 | Connectors for electronic equipment -- Tests and measurements -- Part 15-8: Connector tests (mechanical) -- Test 15h: Contact retention system, resistance to tool application |
| JIS C9029-1 | 移動式電動工具的安全.第1部分:一般要求 | Safety of transportable motor-operated electric tools -- Part 1: General requirements |
| JIS C9029-2-1 | 移動式電動工具的安全.第2-1部分:圓盤形鋸的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-1: Particular requirements for circular saws |
| JIS C9029-2-10 | 移動式電動工具的安全.第2-10部分:切割砂輪機的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-10: Particular requirements for cutting-off grinders |
| JIS C9029-2-11 | 移動式電動工具的安全.第2-11部分:斜切臺式鋸的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-11: Particular requirements for mitre-bench saws |
| JIS C9029-2-2 | 移動式電動工具的安全.第2-2部分:轉向鋸的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-2: Particular requirements for radial arm saws |
| JIS C9029-2-3 | 移動式電動工具的安全.第2-3部分:刨刀和刨板機的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-3: Particular requirements for planers and thicknessers |
| JIS C9029-2-4 | 可移動式電動工具的安全.第2-4部分:臺式砂輪機的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-4: Particular requirements for bench grinders |
| JIS C9029-2-5 | 移動式電動工具的安全.第2-5部分:帶鋸的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-5: Particular requirements for band saws |
| JIS C9029-2-6 | 移動式電動工具的安全.第2-6部分:帶供水的金剛石鉆的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-6: Particular requirements for diamond drills with water supply |
| JIS C9029-2-7 | 移動式電動工具的安全.第2-7部分:帶供水的金剛石鋸的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-7: Particular requirements for diamond saws with water supply |
| JIS C9029-2-8 | 移動式電動工具的安全.第2-8部分:單軸立式造型機的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-8: Particular requirements for single spindle vertical moulders |
| JIS C9029-2-9 | 移動式電動工具的安全.第2-9部分:斜切鋸的特殊要求 | Safety of transportable motor-operated electric tools -- Part 2-9: Particular requirements for mitre saws |
| JIS C9335-2-45 | 家用和類似用途電器.安全.第2-45部分:便攜式加熱工具和類似器具的特殊要求 | Household and similar electrical appliances -- Safety -- Part 2-45: Particular requirements for portable heating tools and similar appliances |
| JIS C9335-2-8 | 家用和類似用途電氣設備的安全.第2-8部分:剃須刀、理發剪刀和類似工具的特殊要求 | Household and similar electrical appliances -- Safety -- Part 2-8: Particular requirements for shavers, hair clippers and similar appliances |
| JIS C9711 | 室內配線用電線接線壓縮工具 | Compression tools for wire connectors of interior wiring |
| JIS C9745-1 AMD 1 | 手持式電動工具的安全.第1部分:一般要求(修改件1) | Safety of hand-held motor-operated electric tools -- Part 1: General requirements (Amendment 1) |
| JIS C9745-1 | 手提式電動工具的安全.第1部分:一般要求 | Safety of hand-held motor-operated electric tools -- Part 1: General requirements |
| JIS C9745-2-1 | 手提式電動工具的安全.第2部分:鉆頭的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for drills |
| JIS C9745-2-11 | 手提式電動工具的安全.第2-11部分:往復式鋸的特殊要求(往復式鋸和軍刀鋸) | Safety of hand-held motor-operated electric tools -- Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) |
| JIS C9745-2-12 | 手提式電動工具的安全.第2-12部分:混凝土振搗器的特殊要求(內振搗器) | Safety of hand-held motor-operated electric tools -- Part 2-12: Particular requirements for concrete vibrators (internal vibrators) |
| JIS C9745-2-13 | 手提式電動工具的安全.第2-13部分:鏈鋸的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-13: Particular requirements for chain saws |
| JIS C9745-2-14 | 手提式電動工具的安全.第2部分:刨刀的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for planers |
| JIS C9745-2-15 | 手提式電動工具的安全.第2-15部分:綠籬修剪機和割草機的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-15: Particular requirements for hedge trimmers and grass shears |
| JIS C9745-2-16 | 手提式電動工具的安全.第2-16部分:釘釘機的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-16: Particular requirements for tackers |
| JIS C9745-2-17 | 手提式電動工具的安全.第2-17部分:電動木銑和修整器的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-17: Particular requirements for routers and trimmers |
| JIS C9745-2-2 | 手提式電動工具的安全.第2-2部分:旋具和套筒扳手的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-2: Particular requirements for screwdrivers and impact wrenches |
| JIS C9745-2-3 | 手提式電動工具的安全.第2部分:磨床、拋光機和砂輪磨光機的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for grinders, polishers and disk-type sanders |
| JIS C9745-2-4 | 手提式電動工具的安全.第2-4部分:打磨器的特殊要求 | Safety of hand-held motor-operated electric tools Part 2-4: Particular requirements for sanders |
| JIS C9745-2-5 | 手提式電動工具的安全.第2部分:圓盤鋸和圓盤刀的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2: Particular requirements for circular saws and circular knives |
| JIS C9745-2-6 | 手提式電動工具的安全.第2-6部分:錘子的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-6: Particular requirements for hammers |
| JIS C9745-2-7 | 手提式電動工具的安全.第2-7部分:不易燃液體噴槍的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-7: Particular requirements for spray guns for non-flammable liquids |
| JIS C9745-2-8 | 手提式電動工具的安全.第2-8部分:薄板材金屬剪的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-8: Particular requirements for sheet metal shears |
| JIS C9745-2-9 | 手提式電動工具的安全.第2-9部分:攻絲機的特殊要求 | Safety of hand-held motor-operated electric tools -- Part 2-9: Particular requirements for tappers |
| JIS F7602 | 機艙內的工具和備件 | Tools and outfits in machinery space |
| JIS F7603 | 小船.發動機艙的工具和儀器 | Small ships -- Tools and instruments of engine department |
| JIS G4401 | 碳素工具鋼 | Carbon tool steels |
| JIS G4403 | 高速工具鋼 | High speed tool steels |
| JIS G4404 | 合金工具鋼 | Alloy tool steels |
| JIS G7701 | 工具鋼 | Tool steels |
| JIS K7214 | 用沖孔工具測定塑料抗剪強度的測試方法 | Testing methods for shear strength of plastics by punch tool |
| JIS M0103 | 鉆探設備和工具術語匯編 | Glossary of terms for drilling equipments and tools |
| JIS M3916 | 礦山工具用硬質合金刀片 | Cemented carbide tips for mining tools |
| JIS M7002 | 無火花的鈹銅合金工具的不易燃性試驗方法 | Non-ignition testing methods for non-sparking beryllium copper alloy tools |
| JIS M7615 | 無火花的鈹銅合金工具 | Nonsparking beryllium copper alloy tools |
| JIS R6211-16 | 粘合磨料產品.尺寸.第16部分:手持電動工具切割用砂輪 | Bonded abrasive products -- Dimensions -- Part 16: Grinding wheels for cutting-off on hand held power tools |
| JIS R6211-6 | 粘合磨料產品.尺寸.第6部分:工具和工具室研磨用砂輪 | Bonded abrasive products -- Dimensions -- Part 6: Grinding wheels for tool and tool room grinding |
| JIS S6060 | 14歲以下(含14歲)兒童用書寫和劃線工具罩的安全性要求 | Caps for writing and marking instruments intended for use by children up to 14 years of age -- Safety requirements |
| JIS T5506-1 | 牙科旋轉儀器.切削工具.第1部分:鋼制實驗室切削工具 | Dental rotary instruments -- Cutters -- Part 1: Steel laboratory cutters |
| JIS T5506-2 | 牙科旋轉儀器.切削工具.第2部分:硬質合金實驗室切削工具 | Dental rotary instruments -- Cutters -- Part 2: Carbide laboratory cutters |
| JIS T5506-3 | 牙科旋轉儀器.切削工具.第3部分:硬質合金實驗室切削工具. 研磨機 | Dental rotary instruments -- Cutters -- Part 3: Carbide laboratory cutters -- Milling machines |
| JIS T5506-4 | 牙科用旋轉儀器.切削工具.第4部分:小型硬質合金制實驗室切削工具 | Dental rotary instruments -- Cutters -- Part 4: Miniature carbide laboratory cutters |
| JIS X0132 | 信息技術.編程中分支語句（ CASE ）工具的評價和選擇指南 | Information technology -- Guideline for the evaluation and selection of CASE tools |
| JIS X0204 | 磁帶方式進行信息互換的代碼工具 | Implementation of code for information interchange on magnetic tape |
| JIS X0206 | 盒式磁帶方式進行信息互換的代碼工具 | Implementation of code for information interchange on magnetic tape cassette |
| JIS X3050 | 信息技術.便攜式通用工具的環境(PCTE).第1部分:抽象規范 | Information technology -- Portable Common Tool Environment (PCTE) -- Part 1: Abstract specification |
| JIS X9301 | 信息技術.在客戶機/服務器模式中數據庫通信管理的移動工具用戶接口 | Information technology -- User interfaces for mobile tools for management of database communications in a client-server model |
| 編號 | 中文名稱 | 英文名稱 |