微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| DL/T 682 | 母線金具用沉頭螺釘 | () |
| FZ/T 90027 | 裝螺栓螺釘用的沖孔尺寸 | () |
| FZ/T 90028 | 軸上緊定螺釘用的孔尺寸 | () |
| FZ/T 90075 | 軸上緊定螺釘用的平臺 尺寸 | () |
| GB 3883.2 | 手持式電動工具的安全第二部分:螺絲刀和沖擊扳手的專用要求 | Safety of hand-held motor-operated electric tools Part 2:Particular requirements for screwdrivers and impact wrenches |
| GB/T 100 | 開槽沉頭木螺釘 | Slotted countersunk head wood screws |
| GB/T 101 | 開槽半沉頭木螺釘 | Slotted raised countersunk head wood screws |
| GB/T 102 | 六角頭木螺釘 | Hexagon head wood screws |
| GB/T 10635 | 螺釘旋具通用技術條件 | Screwdrivers--General technical requirements |
| GB/T 13806.1 | 精密機械用緊固件十字槽螺釘 | Fasteners for fine mechanics--Cross recessed screws |
| GB/T 13806.2 | 精密機械用緊固件十字槽自攻螺釘刮削端 | Fasteners for fine mechanics--Cross recessed tapping screws--Scrape point |
| GB/T 14210 | 墻板自攻螺釘 | Dry wall screws |
| GB/T 15856.1 | 十字槽盤頭自鉆自攻螺釘 | Cross recessed pan head drilling screws with tapping screw thread |
| GB/T 15856.2 | 十字槽沉頭自鉆自攻螺釘 | Cross recessed countersunk head drilling screws |
| GB/T 15856.3 | 十字槽半沉頭自鉆自攻螺釘 | Cross recessed raised countersunk head drilling screws with tapping screw thread |
| GB/T 15856.4 | 六角法蘭面自鉆自攻螺釘 | Hexagon flange head drilling screws with tapping screw thread |
| GB/T 15856.5 | 六角凸緣自鉆自攻螺釘 | Hexagon washer head drilling screws |
| GB/T 16824.1 | 六角凸緣自攻螺釘 | Hexagon head tapping screws with collar |
| GB/T 16824.2 | 六角法蘭面自攻螺釘 | Hexagon flange head tapping screws |
| GB/T 16938 | 緊固件螺栓、螺釘、螺柱和螺母通用技術條件 | Fasteners--General requirements for bolts，screws，studs and nuts |
| GB/T 2670.1 | 內六角花形盤頭自攻螺釘 | Hexalobular socket pan head tapping screws |
| GB/T 2670.2 | 內六角花形沉頭自攻螺釘 | Hexalobular socket countersunk head tapping screws |
| GB/T 2670.3 | 內六角花形半沉頭自攻螺釘 | Hexalobular socket raised countersunk(oval)head tapping screws |
| GB/T 2671.1 | 內六角花形低圓柱頭螺釘 | Hexalobular socket cheese(short)head screws |
| GB/T 2671.2 | 內六角花形圓柱頭螺釘 | Hexalobular socket head cap screws |
| GB/T 2672 | 內六角花形盤頭螺釘 | Hexalobular socket pan head screws |
| GB/T 2673 | 內六角花形沉頭螺釘 | hexalobular socket countersunk head screws |
| GB/T 2674 | 內六角花形半沉頭螺釘 | Hexalobular socket raised countersunk head screws |
| GB/T 3098.1 | 緊固件機械性能螺栓、螺釘和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs |
| GB/T 3098.10 | 緊固件機械性能有色金屬制造的螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners--Bolts，screws，studs and nuts made of non-ferrous metals |
| GB/T 3098.11 | 緊固件機械性能自鉆自攻螺釘 | Mechanical properties of fasteners--Drilling screws with tapping screw thread |
| GB/T 3098.13 | 緊固件機械性能螺栓與螺釘?shù)呐ぞ卦囼灪推茐呐ぞ毓Q直徑1～10mm | Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters from 1mm to 10mm |
| GB/T 3098.16 | 緊固件機械性能不銹鋼緊定螺釘 | Mechanical properties of fasteners--Setscrews made of stainless-steel |
| GB/T 3098.3 | 緊固件機械性能緊定螺釘 | Mechanical properties of fasteners--Set screws |
| GB/T 3098.5 | 緊固件機械性能自攻螺釘 | Mechanical properties of fasteners--Tapping screws |
| GB/T 3098.6 | 緊固件機械性能不銹鋼螺栓、螺釘和螺柱 | Mechanical properties of fasteners--Bolts，screws and studs made of stainless-steel |
| GB/T 3098.7 | 緊固件機械性能自擠螺釘 | Mechanical properties of fasteners--Thread rolling screws |
| GB/T 3099 | 螺栓、螺釘、螺母及附件名詞術語 | Bolts，screws，nuts and accessories--Terminology and nomenclature |
| GB/T 3103.1 | 緊固件公差螺栓、螺釘、螺柱和螺母 | Tolerances for fasteners--Bolts，screws，studs and nuts |
| GB/T 3103.2 | 緊固件公差用于精密機械的螺栓、螺釘和螺母 | Tolerances for fasteners--Bolts，screws and nuts for fine mechanics |
| GB/T 3105 | 普通螺栓和螺釘頭下圓角半徑 | General purpose bolts and screws--Radii under the head |
| GB/T 3106 | 螺栓、螺釘和螺柱的公稱長度和普通螺栓的螺紋長度 | Bolts，screws and studs--Nominal lengths，and thread lengths for general purpose bolts |
| GB/T 3229 | 螺栓螺釘用裝配工具機動螺刀頭的六角傳動端 | Assembly tools for bolts and screws--Hexagon drive ends for machine-operated screw driver bits |
| GB/T 4389 | 螺釘與螺母的裝配工具雙頭呆扳手、雙頭梅花扳手、兩用扳手頭部外形的最大尺寸 | Assembly tool for screws and nuts--Open-end double-head engineers wrenches，doublehead box wrenches and combination wrenches--Maximum outside dimensions of heads |
| GB/T 4625 | 螺釘和螺母的裝配工具術語 | Assembly tools for screws and nuts--Nomenclature |
| GB/T 5276 | 緊固件螺栓、螺釘、螺柱及螺母尺寸代號和標注 | Fasteners--Bolts，screws，studs and nuts--Symbols and designations of dimensions |
| GB/T 5277 | 緊固件螺栓和螺釘通孔 | Fasteners--Clearance holes for bolts and screws |
| GB/T 5279 | 沉頭螺釘頭部形狀和測量 | Countersunk head screws--Head configuration and gauging |
| GB/T 5279.2 | 沉頭螺釘?shù)?部分:十字槽插入深度 | Countersunk flat head screws--Part 2:Penetration depth of cross recesses |
| GB/T 5280 | 自攻螺釘用螺紋 | Tapping screws thread |
| GB/T 5281 | 內六角圓柱頭軸肩螺釘 | Hexagon socket head shoulder screws |
| GB/T 5282 | 開槽盤頭自攻螺釘 | Slotted pan head tapping screws |
| GB/T 5283 | 開槽沉頭自攻螺釘 | Slotted countersunk head tapping screws |
| GB/T 5284 | 開槽半沉頭自攻螺釘 | Slotted raised countersunk head tapping screws |
| GB/T 5285 | 六角頭自攻螺釘 | Hexagon head tapping screws |
| GB/T 5286 | 螺栓、螺釘和螺母用平墊圈總方案 | Plain washers for bolts，screws and nuts--General plan |
| GB/T 5358 | 內六角花形螺釘旋具 | Hexagon spline screwdrivers |
| GB/T 5779.1 | 緊固件表面缺陷螺栓、螺釘和螺柱一般要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements |
| GB/T 5779.3 | 緊固件表面缺陷螺栓、螺釘和螺柱特殊要求 | Fasteners--Surface discontinuities--Bolts，screws and studs for special requirements |
| GB/T 6188 | 螺栓和螺釘用內六角花形 | Hexalobular internal driving feature for bolts and screws |
| GB/T 65 | 開槽圓柱頭螺釘 | Slotted cheese head screws |
| GB/T 6559 | 自攻鎖緊螺釘?shù)穆輻U粗牙普通螺紋系列 | Screw thread shanks for thread forming screw--Metric coarse thread series |
| GB/T 6560 | 十字槽盤頭自攻鎖緊螺釘 | Cross recessed pan head thread forming screws |
| GB/T 6561 | 十字槽沉頭自攻鎖緊螺釘 | Cross recessed countersunk head thread forming screws |
| GB/T 6562 | 十字槽半沉頭自攻鎖緊螺釘 | Cross recessed raised countersunk head threadforming screws |
| GB/T 6563 | 六角頭自攻鎖緊螺釘 | Hexagon head thread forming screws |
| GB/T 6564 | 內六角花形圓柱頭自攻鎖緊螺釘 | Hexagon lobular socket thread forming screws |
| GB/T 67 | 開槽盤頭螺釘 | Slotted pan head screws |
| GB/T 68 | 開槽沉頭螺釘 | Slotted countersunk flat head screws(common head style) |
| GB/T 69 | 開槽半沉頭螺釘 | Countersunk slotted raised head screws(common head style) |
| GB/T 70.1 | 內六角圓柱頭螺釘 | Hexagon socket head cap screws |
| GB/T 70.2 | 內六角平圓頭螺釘 | Hexagon socket button head screws |
| GB/T 70.3 | 內六角沉頭螺釘 | Hexagon socket countersunk head screws |
| GB/T 71 | 開槽錐端緊定螺釘 | Slotted set screws with cone point |
| GB/T 72 | 開槽錐端定位螺釘 | Slotted set screws with cone point |
| GB/T 73 | 開槽平端緊定螺釘 | Slotted set screws with flat point |
| GB/T 74 | 開槽凹端緊定螺釘 | Slotted set screws with cup point |
| GB/T 75 | 開槽長圓柱端緊定螺釘 | Slotted set screws with long dog point |
| GB/T 77 | 內六角平端緊定螺釘 | Hexagon socket set screws with flat point |
| GB/T 78 | 內六角錐端緊定螺釘 | Hexagon socket set screws with cone point |
| GB/T 79 | 內六角圓柱端緊定螺釘 | Hexagon socket set screws with dog point |
| GB/T 80 | 內六角凹端緊定螺釘 | hexagon socket set screws with cup point |
| GB/T 818 | 十字槽盤頭螺釘 | Pan head screws with cross recess |
| GB/T 819.1 | 十字槽沉頭螺釘?shù)?部分:鋼4.8級 | Countersunk flat head screws(common head style)with cross recess--Part 1:Steel of property class 4.8 |
| GB/T 819.2 | 十字槽沉頭螺釘?shù)?部分:鋼8.8、不銹鋼A2-70和有色金屬CU2或CU3 | Cross recessed countersunk flat head screws(common head style)--Grade A--Part 2:Steel ofproperty class 8.8，stainless steel and non-ferrous metals |
| GB/T 820 | 十字槽半沉頭螺釘 | Countersunk raised head screws (common head style) with cross recess |
| GB/T 821 | 方頭倒角端緊定螺釘 | Square set screws with chamfered end |
| GB/T 822 | 十字槽圓柱頭螺釘 | Cheese head screws with cross recess |
| GB/T 825 | 吊環螺釘 | Eyebolts |
| GB/T 828 | 開槽盤頭定位螺釘 | Slotted pan head set screws with dog point |
| GB/T 829 | 開槽圓柱端定位螺釘 | Slotted set screws with dog point |
| GB/T 83 | 方頭長圓柱球面端緊定螺釘 | Square set screws with long dog point and rounded end |
| GB/T 830 | 開槽圓柱頭軸位螺釘 | Slotted cheese head screws with shoulder |
| GB/T 831 | 開槽無頭軸位螺釘 | Slotted shoulder screws |
| GB/T 832 | 開槽帶孔球面圓柱頭螺釘 | Slotted cap stan screws |
| GB/T 833 | 開槽大圓柱頭螺釘 | Slotted large cheese head screws |
| GB/T 834 | 滾花高頭螺釘 | Knurled thumb screws |
| GB/T 835 | 滾花平頭螺釘 | Knurled screws |
| GB/T 836 | 滾花小頭螺釘 | Knurled screws with small head |
| GB/T 837 | 開槽盤頭不脫出螺釘 | Slotted pan head screws with waisted shank |
| GB/T 838 | 六角頭不脫出螺釘 | Hexagon screws with waisted shank |
| GB/T 839 | 滾花頭不脫出螺釘 | Knurled thumb screws with waisted shank |
| GB/T 84 | 方頭凹端緊定螺釘 | Square set screws with cup point |
| GB/T 840 | 塑料滾花頭螺釘 | Plastic diamond knurlhead screws |
| GB/T 845 | 十字槽盤頭自攻螺釘 | Cross recessed pan head tapping screws |
| GB/T 846 | 十字槽沉頭自攻螺釘 | Cross recessed countersunk head tapping screws |
| GB/T 847 | 十字槽半沉頭自攻螺釘 | Cross recessed raised countersunk head tapping screws |
| GB/T 85 | 方頭長圓柱端緊定螺釘 | Square set screws with long dog point |
| GB/T 86 | 方頭短圓柱錐端緊定螺釘 | Square set screws with short dog point and coneend |
| GB/T 878 | 開槽無頭螺釘 | Slotted headless screws with shank |
| GB/T 884 | 螺釘鎖緊擋圈 | Lock ring with screw |
| GB/T 885 | 帶鎖圈的螺釘鎖緊擋圈 | Lock rings with screw and circlip |
| GB/T 891 | 螺釘緊固軸端擋圈 | Lock rings at the end of shaft with screw |
| GB/T 9074.1 | 螺栓或螺釘和平墊圈組合件 | Bolt or screw and washer assemblies with plain washers |
| GB/T 9074.10 | 十字槽半沉頭螺釘和錐形鎖緊墊圈組合件 | Cross recessed raised countersunkhead screw and countersunk external toothed lock washer assemblies |
| GB/T 9074.18 | 自攻螺釘和平墊圈組合件 | Tapping screw and washer assemblies with plain washers |
| GB/T 9074.2 | 十字槽盤頭螺釘和外鋸齒鎖緊墊圈組合件 | Cross recessed pan head screw andserrated lock washer external teeth assemblies |
| GB/T 9074.20 | 十字槽凹穴六角頭自攻螺釘和平墊圈組合件 | Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers |
| GB/T 9074.3 | 十字槽盤頭螺釘和彈簧墊圈組合件 | Cross recessed pan head screw and single coil spring lock washer assemblies |
| GB/T 9074.4 | 十字槽盤頭螺釘，彈簧墊圈和平墊圈組合件 | Cross recessed pan head screw，single coil spring lock washer and plain washer assemblies |
| GB/T 9074.5 | 十字槽小盤頭螺釘和平墊圈組合件 | Cross recessed small pan head screw andwasher assemblies with plain washers |
| GB/T 9074.7 | 十字槽小盤頭螺釘和彈簧墊圈組合件 | Cross recessed small pan head screw and single coil spring lock washer assemblies |
| GB/T 9074.8 | 十字槽小盤頭螺釘和彈簧墊圈及平墊圈組合件 | Cross recessed small pan headscrew，single coil spring lock washer and plain washer assemblies |
| GB/T 9074.9 | 十字槽沉頭螺釘和錐形鎖緊墊圈組合件 | Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies |
| GB/T 922 | 木螺釘技術條件 | Specifications for wood screws |
| GB/T 944.1 | 螺釘用十字槽 | Cross recesses for screws |
| GB/T 9456 | 十字槽凹穴六角自攻螺釘 | Cross recessed hexagon head tapping screws withindentation |
| GB/T 946 | 開槽球面圓柱頭軸位螺釘 | Slotted raised cheese head screws with shoulder |
| GB/T 947 | 開槽球面大圓柱頭螺釘 | Slotted large raised cheese head screws |
| GB/T 948 | 開槽沉頭不脫出螺釘 | Slotted countersunk head screws with waisted shank |
| GB/T 949 | 開槽半沉頭不脫出螺釘 | Slotted raised countersunk head screws with waisted shank |
| GB/T 950 | 十字槽圓頭木螺釘 | Cross recessed round head wood screws |
| GB/T 951 | 十字槽沉頭木螺釘 | Cross recessed countersunk head wood screws |
| GB/T 952 | 十字槽半沉頭木螺釘 | Cross recessed raised countersunk head wood screws |
| GB/T 97.4 | 平墊圈用于螺釘和墊圈組合件 | Plain washers for screw and washer assemblies |
| GB/T 97.5 | 平墊圈用于自攻螺釘和墊圈組合件 | Plain washers for tapping sew and washer assemblies |
| GB/T 99 | 開槽圓頭木螺釘 | Slotted round head wood screws |
| JB/T 10108 | 電動螺絲刀 | () |
| JB/T 10652 | 輪式拖拉機輪轂螺栓、車輪螺釘和螺母 技術條件 | Wheeled tractor-Hub bolts,wheel screws and nuts-Specifications |
| JB/T 2703 | 微型永磁直流螺絲刀 | () |
| JB/T 3411.126 | 端銑刀桿螺釘 尺寸 | () |
| JB/T 3411.127 | 端銑刀桿螺釘扳手 尺寸 | () |
| JB/T 3411.16 | 內四方緊定螺釘 尺寸 | () |
| JB/T 3411.90 | 定心圓錐螺釘 尺寸 | () |
| JB/T 3926.12 | 垂直斗式提升機 膠帶螺釘參數尺寸 | () |
| JB/T 4211.1 | 冷鐓螺釘模具終鐓 沖頭 A型 | () |
| JB/T 4211.10 | 冷鐓螺釘模具 凹模 B型 | () |
| JB/T 4211.11 | 冷鐓螺釘模具 凹模 C型 | () |
| JB/T 4211.12 | 冷鐓螺釘模具 凹模 D型 | () |
| JB/T 4211.2 | 冷鐓螺釘模具終鐓 沖頭 B型 | () |
| JB/T 4211.3 | 冷鐓螺釘模具終鐓 沖頭 C型 | () |
| JB/T 4211.4 | 冷鐓螺釘模具終鐓 沖頭 D型 | () |
| JB/T 4211.5 | 冷鐓螺釘模具終鐓 沖頭 E型 | () |
| JB/T 4211.6 | 冷鐓螺釘模具終鐓 沖頭 F型 | () |
| JB/T 4211.7 | 冷鐓螺釘模具終鐓 沖頭 G型 | () |
| JB/T 4211.8 | 冷鐓螺釘模具終鐓 沖頭 H型 | () |
| JB/T 4211.9 | 冷鐓螺釘模具 凹模 A型 | () |
| JB/T 4212.1 | 冷鐓內六角圓柱頭螺釘模具 初鐓沖頭 A型 | () |
| JB/T 4212.10 | 冷鐓內六角圓柱頭螺釘模具 初鐓凹模 | () |
| JB/T 4212.11 | 冷鐓內六角圓柱頭螺釘模具 成形凹模 | () |
| JB/T 4212.12 | 冷鐓內六角圓柱頭螺釘模具 六角凹模片 | () |
| JB/T 4212.13 | 冷鐓內六角圓柱頭螺釘模具 鐓六角凹模 | () |
| JB/T 4212.2 | 冷鐓內六角圓柱頭螺釘模具 初鐓沖頭頂桿 A型 | () |
| JB/T 4212.3 | 冷鐓內六角圓柱頭螺釘模具 初鐓沖頭 B型 | () |
| JB/T 4212.4 | 冷鐓內六角圓柱頭螺釘模具 成形沖頭 | () |
| JB/T 4212.5 | 冷鐓內六角圓柱頭螺釘模具 內六角沖頭 A型 | () |
| JB/T 4212.6 | 冷鐓內六角圓柱頭螺釘模具 內六角沖頭 B型 | () |
| JB/T 4212.7 | 冷鐓內六角圓柱頭螺釘模具 內六角沖頭 C型 | () |
| JB/T 4212.8 | 冷鐓內六角圓柱頭螺釘模具 內六角沖頭 D型 | () |
| JB/T 4212.9 | 冷鐓內六角圓柱頭螺釘模具 初鐓成形凹模片 | () |
| JB/T 5129 | 純扭式氣動螺絲刀 | () |
| JB/T 5227.6 | 氣相色譜儀用管路附件 堵頭螺釘 | () |
| JB/T 5343 | 電動自攻螺絲刀 | () |
| JB/T 5399 | 尼龍嵌件鎖緊螺栓、螺釘鎖緊部分 結構要素與鎖緊力矩 | () |
| JB/T 5614 | 鋸片銑刀、螺釘槽銑刀壽命試驗方法 | Life testing methods in metal slitting saws and bolt slot cutters |
| JB/T 7384.13 | 緊固件 自攻鎖緊螺釘外接圓直徑量規 | () |
| JB/T 7384.14 | 緊固件 木螺釘螺紋小徑卡尺 | () |
| JB/T 7650.5 | 沖模卸料裝置 第5部分：圓柱頭卸料螺釘 | Stripping units of stamping dies-Part 5:Clyindrical head stripper bolts |
| JB/T 7650.5 | 沖模卸料裝置 第5部分：圓柱頭卸料螺釘 | Stripping units of stamping dies-Part 5:Clyindrical head stripper bolts |
| JB/T 7650.6 | 沖模卸料裝置 第6部分：圓柱頭內六角卸料螺釘 | Stripping units of stamping dies-Part 6:Hexagonal socket stripper bolts |
| JB/T 7650.6 | 沖模卸料裝置 第6部分：圓柱頭內六角卸料螺釘 | Stripping units of stamping dies-Part 6:Hexagonal socket stripper bolts |
| JB/T 7755 | 滾動軸承 附件 外球面球軸承用緊定螺釘 | () |
| JB/T 8006.1 | 機床夾具零件及部件 壓緊螺釘 | () |
| JB/T 8006.2 | 機床夾具零件及部件 六角頭壓緊螺釘 | () |
| JB/T 8006.3 | 機床夾具零件及部件 固定手柄壓緊螺釘 | () |
| JB/T 8006.4 | 機床夾具零件及部件 活動手柄壓緊螺釘 | () |
| JB/T 8026.6 | 機床夾具零件及部件 螺釘支承 | () |
| JB/T 8036.1 | 機床夾具零件及部件 螺釘支座 | () |
| JB/T 8042 | 機床夾具零件及部件 螺釘用墊板 | () |
| JB/T 8043.1 | 機床夾具零件及部件 塑料夾具用六角頭螺釘 | () |
| JB/T 8043.2 | 機床夾具零件及部件 塑料夾具用內六角螺釘 | () |
| JB/T 8045.5 | 機床夾具零件及部件 鉆套螺釘 | () |
| JB/T 8046.3 | 機床夾具零件及部件 鏜套螺釘 | () |
| JB/T 8363.1 | 沉孔可轉位刀片用緊固螺釘頭部內六角花型的型式和尺寸 | () |
| JB/T 8363.2 | 沉孔可轉位刀片用緊固螺釘 技術規范 | () |
| JB/T 8366 | 螺釘槽銑刀 | () |
| JB/T 9151.1 | 緊固件測試方法 尺寸與幾何精度 螺栓、螺釘、螺柱和螺母 | () |
| JB/T 9151.2 | 緊固件測試方法 尺寸與幾何精度 木螺釘 | () |
| JB/T 9151.3 | 緊固件測試方法 尺寸與幾何精度 自攻螺釘 | () |
| JB/T 9158.13 | 臥式多軸自動車床輔具 方頭螺釘尺寸 | () |
| JB/T 9161.10 | 內圓磨床接桿用螺釘 尺寸 | () |
| JB/T 9162.14 | 帶孔滾花螺釘 尺寸 | () |
| JB/T 9162.14 | 帶孔滾花螺釘 尺寸 | () |
| JB/T 9162.15 | 壓緊螺釘 尺寸 | () |
| JB/T 9162.16 | 圓柱頭螺釘 尺寸 | () |
| QB/T 1906 | 手表螺釘 | () |
| QB/T 2146 | 家用縫紉機挑線桿螺釘 | () |
| QB/T 2448 | 手表通用螺釘尺寸系列 | () |
| QB/T 2564.1 | 螺釘旋具 命名與術語 | () |
| QB/T 2564.2 | 螺釘旋具 一字槽螺釘旋具旋桿 | () |
| QB/T 2564.3 | 螺釘旋具 十字槽螺釘旋具旋桿 | () |
| QB/T 2564.4 | 螺釘旋具 一字槽螺釘旋具 | () |
| QB/T 2564.5 | 螺釘旋具 十字槽螺釘旋具 | () |
| QB/T 2564.6 | 螺釘旋具 螺旋棘輪螺釘旋具 | () |
| QB/T 2564.6 | 螺釘旋具 螺旋棘輪螺釘旋具 | () |
| QB/T 3555 | 家用縫紉機大頂尖螺釘技術條件 | () |
| QC/T 602-1999(2005) | 十字槽大半圓頭自攻螺釘 | () |
| QC/T 602-1999(2005) | 十字槽大半圓頭自攻螺釘 | () |
| QC/T 713 | 塑料（尼龍）用自攻螺釘螺紋 | Tapping screws thread for plastic(nylon) |
| 編號 | 中文名稱 | 英文名稱 |