微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| NF B51-128 | 纖維板.螺釘軸向抽出阻力的測定 | (FIBREBOARDS. DETERMINATION OF RESISTANCE TO AXIAL WITHDRAWAL OF SCREWS. (EUROPEAN STANDARD EN 320).) |
| NF B51-260 | 木屑板.螺絲拔除試驗 | (PARTICLE BOARD. TEST FOR WITHDRAWAL OF SCREWS.) |
| NF C20-115 | 標定截面不超過2.5mm**2，線芯無特殊預加工的硬銅導線連接的無螺釘接線端 | (TERMINALS WITHOUT SCREW CLAMPING FOR CONNECTION OF CONDUCTORS FOR FIXED WIRING,WITH A NOMINAL CROSS-SECTION NOT EXCEEDIND 2,5 MM2, AND WITHOUT SPECIAL PREPARATION OF THE CONDUCTOR.) |
| NF C20-116 | 室外銅導線用螺釘絲端子 | (Terminals with screw campling for external copper conductors.) |
| NF C60-002 | 家用及類似用低壓電路用連接裝置.第2-2部分:不帶螺釘型夾件的分開的部件連接裝置的特別要求 | (Connecting devices for low voltage circuits for household and similar purposes. Part 2-2 : particular requirements for connecting devices as separate entities with screwless-type clamping units.) |
| NF C83-403-803 | 詳細規范:防松螺釘不可拆卸的厚度為0.8MM的帶扁平觸點的矩形連接器 | (Detail Specification : rectangular connectors - Flat contacts, 0,8 mm thickness, locking screw not detachable.) |
| NF C93-561 | 電子元件.螺釘鎖定的小型同軸接頭.一般規定 | (Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.) |
| NF C93-566 | 電子元件.螺釘鎖定射頻用同軸接頭（ＫＮ系列）.一般規定 | (ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW COUPLING (TYPE KN). GENERAL REQUIREMENTS.) |
| NF C93-578 | 射頻連接件.第20部分:外導線內徑為13.56mm(0,534 in)同時帶有兩條內導線的屏蔽平衡電纜用雙頭螺釘(3/4-20統 | (Radio-frequency connectors. Part 25 : two-pole screw (3/4-20 unef) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534 in) (type twhn).) |
| NF E02-312 | 鋼制規.螺絲孔莫氏錐環規 | (STEEL GAUGES. MORSE TAPER RING GAUGES.) |
| NF E02-316 | 鋼制規.螺絲孔５％錐度環規 | (STEEL GAUGES. METRIC TAPER RING GAUGES.) |
| NF E03-152 | 用極限量規檢驗螺紋.螺釘用螺紋規 | (Thread checking with limit gauges. Threaded gauges for screw.) |
| NF E03-154 | 公制三角螺紋.用極限規檢驗螺紋.螺釘和螺釘孔光滑度檢查器 | (THREAD CHECKING WITH LIMIT GAUGES. PLAIN GAUGES FOR SCREWS AND NUTS.) |
| NF E04-012-1 | 技術制圖.螺釘和螺紋部件.第1部分:通用規范 | (Technical drawings. Screw threads and threaded parts. Part 1 : general conventions.) |
| NF E04-012-2 | 技術制圖.螺釘和螺紋部件.第2部分:螺紋嵌鑲件 | (TECHNICAL DRAWINGS. SCREW THREADS AND THREADED PARTS. PART 2 : SCREW THREAD INSERTS. (EUROPEAN STANDARD EN ISO 6410-2).) |
| NF E04-012-3 | 技術制圖.螺釘和螺紋部件.第3部分:簡化表示 | (TECHNICAL DRAWINGS. SCREW THREADS AND THREADS AND THREADED PARTS. PART 3 : SIMPLIFIED REPRESENTATION. (EUROPEAN STANDARD EN ISO 6410-3).) |
| NF E22-201 | 滾珠螺釘.第1部分:詞匯和命名 | (Ball screws. Part 1 : vocabulary and designation.) |
| NF E22-202 | 滾珠螺釘.第2部分:公稱直徑和公稱引線.米制系列 | (Ball screws. Part 2 : nominal diameters and nominal leads. Metric series.) |
| NF E22-203 | 球端螺釘.第3部分:合格條件和合格試驗 | (Ball screws. Part 3 : acceptance conditions and acceptance tests.) |
| NF E25-011 | 緊固件的機械特性.由非亞鐵金屬制造的螺栓,螺釘,柱螺栓和螺母 | (MECHANICAL PROPERTIES OF FASTENERS. BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS. (EUROPEAN STANDARD EN 28839).) |
| NF E25-018-2 | 沉頭螺釘.第2部分:十字槽 | (CONTERSUNK FLAT HEAD SCREWS. PART 2 : PENETRATION DEPTHY OF CROSS RECESSES. (EUROPEAN STANDARD EN ISO 7721-2).) |
| NF E25-021 | 螺釘?shù)氖植?歐洲標準EN ISO 4757) | (Cross recesses for screws.) |
| NF E25-022-1 | 緊固件公差.螺栓、螺釘、雙頭螺栓和螺母.第1部分:產品等級A、B及C | (Tolerances for fasteners - Bolts, screws, studs and nuts - Part 1 : product grades A, B and C.) |
| NF E25-022 | 緊固件.Ｆ級螺釘和螺帽公差（精密機械）.螺紋直徑1到3mm | (FASTENERS. TOLERANCES FOR BOLTS,SCREWS AND NUTS PRODUCT GRADE F (FINE MECHANIC). THREAD DIAMETERS FROM 1 UP TO 3 MM.) |
| NF E25-023 | 緊固件.螺栓和螺釘?shù)淖杂沙叽缈? | (Fasteners. Clearance hole for bolts and screws.) |
| NF E25-100-1 | 碳鋼合金制成的緊固件的機械性能.第1部分:螺栓、螺釘和螺柱 | (Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1 : bolts, screws and studs.) |
| NF E25-100-3 | 緊固件.表面不連續性.第1部分:一般要求的螺栓、螺釘和螺柱 | (FASTENERS. SURFACE DISCONTINUITIES. PART 1 : BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-1).) |
| NF E25-100-4 | 緊固件.表面不連續性.第3部分:特殊要求的螺栓、螺釘和螺柱 | (FASTENERS. SURFACE DISCONTINUTIES. PART 3 : BOLTS, SCREW AND STUDS FOR SPECIAL REQUIREMENTS. (EUROPEAN STANDARD EN 26157-3).) |
| NF E25-100-5 | 碳鋼和不銹鋼制緊固件的機械性能.第5部分:不處在拉伸應力下的固定螺釘和類似螺紋緊固件 | (Mechanical properties of fasteners made of carbon steel and alloy steel. Part 5 : set screws and similar threaded fasteners not under tensile stresses.) |
| NF E25-100-6 | 不銹鋼緊固件耐腐蝕的機械特性.螺栓,螺絲和雙端螺栓 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 1 : bolts, screws and studs.) |
| NF E25-100-7 | 緊固件的機械性能.第7部分:公稱直徑1-10mm的螺栓和螺釘?shù)呐ちυ囼?yàn)和最小扭矩 | (MECHANICAL PROPERTIES OF FASTENERS. PART 7 : TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM. (EUROPEAN STANDARD EN 20898-7).) |
| NF E25-100-8 | 不銹鋼緊固件耐腐蝕的機械特性.不低于拉伸應力下配套螺釘和類似緊固件 | (Mechanical properties of corrosion-resistant stainless-steel fasteners. Part 3 : set screws and similar fasteners not under tensile stress.) |
| NF E25-107 | 金屬用螺釘.內部六葉埋頭.Ａ級.符號ＦＸ | (SCREWS. SIX LOBES RECESSED CONTERSUNK HEAD. PRODUCT GRADE A. SYMBOL FX.) |
| NF E25-108 | 半埋頭內六角螺釘 | (Hexalobular socket raised countersunk head screws.) |
| NF E25-109 | 平頭內六角螺釘 | (Hexalobular socket pan head screws.) |
| NF E25-110 | 圓柱頭內六角螺釘 | (Hexalobular socket head cap screws.) |
| NF E25-111 | 凸頭內六角螺釘 | (Hexalobular socket cheese head screws.) |
| NF E25-114 | 六角頭螺釘.產品等級A和B | (Hexagon head bolts - Product grades A and B.) |
| NF E25-115-2 | 六角頭螺釘.產品等級C | (Hexagon head screws - Product grade C.) |
| NF E25-116 | 金屬用螺釘.方頭.標準桿.A和B級.符號Q | (Square head screws. Product grades A and B. Symbol Q.) |
| NF E25-117 | 金屬用螺釘.方頭.全螺紋.A和B級.符號Q | (Square head screws. Product grades A and B. Symbol Q.) |
| NF E25-118 | 金屬用螺釘.方頭.C級.符號Q | (Square head screws. Product grade C. Symbol Q.) |
| NF E25-119-1 | 帶有H型或Z型的十字槽沉頭螺釘(普通頭型).產品等級A.第1部分:性能類別4.8的鋼 | (Countersunk flat head screws (common head style) with type H or type Z cross recessed. Product grade A. Part 1 : steel of property class 4.8.) |
| NF E25-119-2 | 十字槽沉頭螺釘(一般頭形).等級A.第2部分:8.8類特性鋼,不銹鋼和有色金屬 | (Cross recessed countersunk flat head scews (common head style). Grade A. Part 2 : steel of property class 8.8, stainless steel and non-ferrous metals.) |
| NF E25-120 | 帶有H型或Z型的十字槽半沉頭螺釘(普通頭型).產品等級A | (Countersunk raised head screws (common head style) with type H or type Z cross recessed. Product grade A.) |
| NF E25-121 | 帶有H型或Z型十字槽的平圓頭螺釘.產品等級A | (Pan head screws with type H or type Z cross recess. Product grade A.) |
| NF E25-122 | 金屬用螺釘.稱作“POLIER“的Z十字槽寬圓頭.A級.符號RLZ | (SCREWS. CROSS RECESSED MUSHROOM HEAD (POELIERS). PRODUCT GRADE A. SYMBOL RL Z.) |
| NF E25-123 | 一字槽沉頭螺釘(普通頭型).產品等級A | (Slotted countersunk flat head screws (common head style). Product grade A.) |
| NF E25-124 | 一字槽半沉頭螺釘(普通頭型).產品等級A | (Slotted raised countersunk head screws (common head style). Product grade A.) |
| NF E25-126 | 內六角圓頭螺釘 | (HEXAGON SOCKET BUTTON HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7380).) |
| NF E25-128 | 一字槽平圓頭螺釘.產品等級A | (Slotted pan head screws. Product grade A.) |
| NF E25-130 | 加墊圈的金屬用螺釘.錐形光滑壓緊墊圈.Ａ級 | (SCREWS WITH CONICAL SPRING TIGHTENING WASHER. PRODUCT GRADE A.) |
| NF E25-131 | 加墊圈的金屬用螺釘.內齒錐形墊圈.Ａ級 | (SCREWS WITH CONICAL SPRING INTERNAL TOOTHED TIGHTENING WASHER. PRODUCT GRADE A.) |
| NF E25-132 | 加墊圈的金屬用螺釘.外齒墊圈.Ａ級 | (SCREWS WITH SERRATED EXTERNAL OVERLAPED TOOTHED LOCK TIGHTENNING WASHER. PRODUCT GRADE A.) |
| NF E25-133 | 緊固件.螺桿千斤頂用的金屬螺釘.短六角頭長制動端螺釘.Ａ和Ｂ級.符號ＨＺ | (Fasteners. Screws for screw-jacks. Small hexagon head screws with long dog point. Product grades A and B. Symbol HZ.) |
| NF E25-134 | 緊固件.螺桿千斤頂用的金屬螺釘.短方頭短制動端螺釘.Ａ和Ｂ級.符號ＱＺ | (Fasteners. Screws for screw-jacks. Small square head screws with short dog point. Product grades A and B. Symbol QZ.) |
| NF E25-139 | 緊固件.金屬用螺釘.Ｚ十字槽寬凸圓柱形頭.Ａ級.符號ＣＢＬＺＳ | (FASTENERS. SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. GRADE A. SYMBOL CBL ZS.) |
| NF E25-142 | 緊固件.電阻焊金屬螺釘.縮小頭 | (FASTENERS. RESISTANCE WELDING SCREWS. REDUCED HEAD. SYMBOL Z. SR.) |
| NF E25-149 | 十字槽圓頭螺釘 | (CROSS RECESSED CHEESE HEAD SCREWS. (EUROPEAN STANDARD EN ISO 7048).) |
| NF E25-150 | 帶平墊圈的螺釘和墊圈組件.墊圈強度等級為200 HV和300 HV. | (Screw and washer assemblies with plain washers. Washer hardness classes 200 HV and 300 HV.) |
| NF E25-151 | 米制細牙螺紋的六角頭螺釘.產品等級A和B | (Hexagon head screws with metric fine pitch thread - Product grades A and B.) |
| NF E25-160 | 平端開槽調整螺釘 | (SLOTTED SET SCEWS WITH FLAT POINT. (EUROPEAN STANDARD EN 24766).) |
| NF E25-161 | 錐端開槽調整螺釘 | (SLOTTED SET SCEWS WITH CONE POINT. (EUROPEAN STANDARD EN 27434).) |
| NF E25-162 | 長制動端開槽調整螺釘 | (SLOTTED SET SCREWS WITH LONG DOG POINT. (EUROPEAN STANDARD EN 27435).) |
| NF E25-163 | 蝶形端開槽調整螺釘 | (SLOTTED SET SCEWS WITH CUP POINT. (EUROPEAN STANDARD EN 27436).) |
| NF E25-501 | 緊固件公差.第3部分:螺栓、螺釘和螺母用平墊圈.A級和C級 | (Tolerances for fasteners - Part 3 : plain washers for bolts, screws and nuts - Product grades A and C.) |
| NF E25-520 | 螺絲和洗衣機組件用水平式洗衣機.小型,常規型和大型系列.A級產品 | (PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A. (EUROPEAN STANDARD EN ISO 10673).) |
| NF E25-525 | 通用米制螺栓、螺釘和螺母用平墊圈.一般示意圖 | (Plain washers for metric bolts, screws and nuts for general purposes - General plan.) |
| NF E25-600 | 緊固件.木螺釘系列標準 | (FASTENERS. WOOD SCREWS FAMILY STANDARD.) |
| NF E25-601 | 十字槽沉頭木螺釘.符號FZ | (CROSS RECESSED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FZ.) |
| NF E25-602 | 十字槽沉頭木螺釘.符號FBZ | (CROSS RECESSED RAISED COUNTERSUNK HEAD WOOD SCREWS. SYMBOL FBZ.) |
| NF E25-603 | 一字槽圓頭木螺釘.符號RZ | (CROSS RECESSED ROUND HEAD WOOD SCREWS. SYMBOL RZ.) |
| NF E25-604 | 有槽沉頭木螺釘.符號FS | (Slotted countersunk head wood screws. Symbol FS.) |
| NF E25-605 | 木螺絲.一字槽沉頭.FBS符號 | (Slotted raised countersunk head wood screws. Symbol FBS.) |
| NF E25-609 | 木螺釘.螺絲眼 | (WOODSCREWS. SCREW-EYES.) |
| NF E25-609 | 木螺釘.螺絲眼 | (WOODSCREWS. SCREW-EYES.) |
| NF E25-610 | 木螺釘.螺絲鉤 | (WOODSCREWS. SCREW-HOOKS.) |
| NF E25-610 | 木螺釘.螺絲鉤 | (WOODSCREWS. SCREW-HOOKS.) |
| NF E25-611 | 木螺釘.直角彎頭螺絲鉤 | (WOODSCREWS. SQUARE BEND SCREW HOOKS.) |
| NF E25-611 | 木螺釘.直角彎頭螺絲鉤 | (WOODSCREWS. SQUARE BEND SCREW HOOKS.) |
| NF E25-650-1 | 熱處理鋼自攻螺釘.機械性能 | (Heat-treated steel tapping screws. Mechanical properties.) |
| NF E25-650-2 | 自攻螺釘螺紋 | (Tapping screw thread.) |
| NF E25-651 | 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘 | (Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4 : tapping screws.) |
| NF E25-652 | 沉頭內六角攻絲螺釘 | (Hexalobular socket countersunk head tapping screws.) |
| NF E25-653 | 半埋頭(橢圓形)內六角攻絲螺釘 | (Hexalobular socket raised countersunk (oval) head tapping screws.) |
| NF E25-654 | 平頭內六角攻絲螺釘 | (Hexalobular socket pan head tapping screws.) |
| NF E25-655 | 內六角圓頭自攻螺釘.符號RLX | (ROUND HEAD TAPPING SCREWS WITH SIX LOBES RECESS. SYMBOL RLX .) |
| NF E25-656 | 十字槽沉頭自攻螺釘(普通頭型) | (Cross recessed countersunk (flat) head tapping screws (common head style).) |
| NF E25-657 | 十字槽半沉頭橢圓頭自攻螺釘 | (Cross recessed raised countersunk (oval) head tapping screws.) |
| NF E25-658 | 十字槽平圓頭自攻螺釘 | (Cross recessed pan head tapping screws.) |
| NF E25-659 | 自攻螺釘.十字槽半沉頭.(`Poelier`).符號RLZ | (TAPPING SCREWS. CROSS RECESSED MUSHROOM HEAD (“POELIER“). SYMBOL RL Z.) |
| NF E25-664 | 一字槽六角頭自攻螺釘.符號HS | (HEXAGON SLOTTED HEAD TAPPING SCREWS. SYMBOL HS.) |
| NF E25-666 | 緊固件.自攻螺釘.Z形十字槽和一字槽平圓頭螺釘.符號CBL ZS | (FASTENERS. TAPPING SCREWS. Z CROSS RECESSED AND SLOTTED PAN HEAD. SYMBOL CBL ZS.) |
| NF E25-755 | 非硬度鋼和奧斯特不銹鋼的內螺紋平行螺釘 | (Parallel pins with internal thread, of unhardened steel and austenitic stainless steel.) |
| NF E25-756 | 金屬不銹鋼和硬化鋼的平行螺釘 | (Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins).) |
| NF E25-757 | 非硬度鋼和奧斯特不銹鋼的內螺紋平行螺釘 | (Parallel pins with internal thread, of hardened steel and martensitic stainless steel.) |
| NF E25-800-1 | 緊固件.波紋鋼管用螺栓.第1部分:帶法蘭或不帶法蘭,帶尖或不帶尖的六角頭螺釘.產品等級A | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 1 : HEXAGON HEAD SCREWS WITH OR WITHOUT FLANGE, WITH OR WITHOUT NIBS. PRODUCT GRADE A.) |
| NF E25-800-2 | 緊固件.波紋鋼管用螺栓.第2部分:帶尖或不帶尖的圓頭螺釘.產品等級A | (FASTENERS. BOLTS FOR CORRUGATED STEEL PIPES. PART 2 : CHEESE HEAD SCREWS, WITH OR WITHOUT NIBS. PRODUCT GRADE A.) |
| NF E25-851 | 緊固件.滾制螺釘(ISO米制螺紋).特性 | (FASTENERS. THREAD ROLLING SCREWS (ISO METRIC THREAD). PROPERTIES.) |
| NF E27-163 | 調整螺釘 | (ADJUSTING SCREW.) |
| NF E27-164 | 鎖緊螺釘?shù)膲|板 | (LOCKING SCREW.) |
| NF E27-165 | 鎖緊螺釘?shù)拇╀N | (SLIDE FOR LOCKING SCREW.) |
| NF E27-166 | 滾花頭鎖緊螺釘 | (LOCKING SCREW WITH KNURLED KNOB.) |
| NF E27-167 | 星形手扭鎖緊螺釘 | (LOCKING SCREW WITH PALM KNOB.) |
| NF E27-168 | 四翼鎖緊螺釘 | (LOCKING SCREW WITH 4 ARMED KNOB.) |
| NF E27-170 | 通用滾花頭螺釘 | (GENERAL PURPOSE KNURLED THUMBS SCREWS.) |
| NF E27-191 | 緊固件.有肩固定螺釘 | (FASTENERS. SHOULDERED RETAINING SCREWS.) |
| NF E27-214 | 帶小提琴緊弦用的蝶形螺母鎖緊螺釘 | (LOCKING SCREW WITH VIOLIN TYPE THUMB NUT.) |
| NF E27-215 | 帶六角螺母的鎖緊螺釘 | (LOCKING SCREWS WITH HEXAGON NUT.) |
| NF E27-303 | 有孔球頭螺釘 | (SPHERICAL HOLED HEAD SCREW.) |
| NF E27-853 | 通用金屬卡箍.帶型，無螺釘，不可重復使用 | (Metallic hose clamps for general purpose. Band type, without screws, non re-usable. Specifications.) |
| NF E27-854 | 通用金屬卡箍.帶型,無螺釘,可重復使用的銷釘卡箍或軸的卡箍 | (METAL-HOSE CLAMPS FOR GENERAL PURPOSES ; BAND TYPE,WITHOUT SCREWS,RE-USABLE,PIN OR AXLE CLAMPS.) |
| NF E62-307 | 機床構造標準部件.多軸頭.防護裝置.２８和３６臥式防護裝置.支架.行程止推螺釘 | (MODULAR UNITS FOR MACHINE TOOL CONSTRUCTION. MULTI-SPINDLE HEADS. HORIZONTAL TEMPLATES 28 AND 36. SUPPORTS : STOP SCREW.) |
| NF E62-519 | 柱形扁柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).第1部分:刀柄驅動系統的尺寸 | (Tool chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tool - Part 1 : dimensions of the driving system of tool shanks.) |
| NF E62-520 | 柱形扁柄刀具用螺釘壓緊刀具夾(立銑刀刀夾).帶7/24錐柄的夾頭尺寸 | (Tools chucks (end mill holders) wirth clamp screws for flatted cylindrical shank tools - Dimensions of chucks with 7/24 taper shank.) |
| NF E62-526 | 帶7/24外圓錐和莫氏內圓錐縮徑套筒和連接螺釘 | (Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw.) |
| NF E63-512 | 鑄型和擠壓器材.金屬模型構件.止動螺釘 | (MOULDING AND EXTRUSION EQUIPMENT. METALLIC MOULDING ELEMENTS. LOCKING SCREWS.) |
| NF E66-103 | 機用螺絲錐和手動螺絲錐 | (Short machine taps and hand taps.) |
| NF E66-107 | 公稱直徑由M3-M10的長桿螺絲攻.由回縮的全直徑桿型螺絲攻 | (Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess.) |
| NF E66-108 | 公稱直徑由M3-M24和1/8-1 英寸的長桿螺絲攻.漸減型螺絲攻 | (Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in - Reduced shank taps.) |
| NF E66-120 | 圓柱和錐形管螺紋手用螺絲錐 | (HAND TAPS FOR PIPE THREADS FOR PARALLEL AND TAPER THREADS.) |
| NF E66-150 | ＩＳＯ公制螺紋的手用和機用圓螺絲板牙 | (Hand- An machine-operated circular screwing dies and hand-operated die stocks.) |
| NF E66-153 | 煤氣管道圓柱螺紋手用和機用圓螺絲板牙 | (Hand-and machine-operated circular screwing dies for parallel pipe threads. G series.) |
| NF E74-303 | 螺釘和螺母組裝工具.鍛造的和管形套筒扳手.頭部外形最大尺寸 | (Assembly tools for screws and nuts - Forged and tubular socket wrenches - Maximum outside head dimensions.) |
| NF E74-304 | 螺釘和螺母裝配工具.雙頭開口扳手、雙頭環形扳手和多用扳手.端部最大寬度 | (Assembly tools for screws and nuts - Double-headed open-ended wrenches, double-headed ring wrenches and combination wrenches - Maximum widths of heads.) |
| NF E74-305 | 螺釘和螺母裝配工具.雙頭扳手.尺寸選配 | (Assembly tools for screws and nuts - Double-ended wrenches - Size pairings.) |
| NF E74-307 | 螺釘和螺母用裝配工具.組合扳手.扳手長度和端口最大厚度 | (Assembly tools for screws and nuts - Combination wrenches - Lengths of wrenches and maximum thickness of heads.) |
| NF E74-310 | 螺釘和螺母用裝配工具.工程用雙頭開口扳手.扳手長度和端口厚度 | (Assembly tools for screws and nuts - Double-headed open-ended engineers' wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-311 | 螺釘和螺母用裝配工具.雙頭平直套筒扳手和斜口套筒扳手.扳手長度和端口厚度 | (Assembly tools for screws and nuts - Double-headed, flat and offset, box wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-313 | 螺釘和螺母用裝配工具.雙頭深斜口套筒扳手和改進的斜口套筒扳手.扳手長度和端口厚度 | (Assembly tools for screws and nuts - Double-headed, deep offset and modified offset, box wrenches - Length of wrenches and thickness of the heads.) |
| NF E74-321 | 螺釘和螺母用裝配工具.十字形套筒扳手.尺寸和扭矩試驗 | (ASSEMBLY TOOLS FOR SCREWS AND NUTS. FOUR-WAY SOCKET WRENCHES. DIMENSIONS AND TORQUE TEST.) |
| NF E74-322 | 螺釘螺帽緊固工具.齒條式扳手 | (ASSEMBLY TOOLS FOR SCREWS AND NUTS.RACK WRENCHES.) |
| NF E74-323 | 螺釘螺帽緊固工具.開槽螺帽用單鉤扳手 | (ASSEMBLY TOOLS FOR SCREWS AND NUTS.HOOK WRENCHES) |
| NF E74-324 | 螺釘和螺母用裝配工具.可調扳手 | (Assembly tools for screws and nuts - Adjustable wrenches.) |
| NF E74-325 | 螺釘和螺母用裝配工具.手動轉矩工具.設計一致性試驗、質量一致性試驗和重新校準程序的要求和試驗方法 | (Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure.) |
| NF E74-331 | 螺釘和螺母用裝配工具.內六角扳手 | (Assembly tools for screws and nuts - Hexagon socket screw keys.) |
| NF E74-351 | 螺釘和螺母用裝配工具.一字槽頭螺釘用旋具.第2部分:手工操作旋具的一般要求、刀刃長度和標記 | (Assembly tools for screws and nuts - Screwdrivers for slotted-head screws - Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.) |
| NF E74-352 | 螺釘和螺母用裝配工具.槽螺釘用旋具.第1部分:手工及機械操作用的旋具頭 | (Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.) |
| NF E74-353-1 | 螺釘和螺母用裝配工具.機動旋轉頭.第1部分:一字槽螺釘旋具 | (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 1 : screwdriver bits for slotted head screws.) |
| NF E74-353-2 | 螺釘和螺母用裝配工具.機動旋轉頭.第2部分:十字槽螺釘旋具頭 | (Assembly tools for screws and nuts - Machine-operated screwdrivers bits - Part 2 : screwdriver bits for cross-recessed head screws.) |
| NF E74-353-3 | 螺釘和螺母用裝配工具.機動旋轉頭.第3部分:內六角螺釘用旋具頭 | (Assembly tools for screws and nuts - Machine-operated screwdriver bits - Part 3 : screwdriver bits for hexagon socket screws.) |
| NF E74-354 | 螺釘和螺母用裝配工具.螺旋棘輪螺釘旋具頭.尺寸 | (Assembly tools for screws and nuts - Spiral ratchet screwdriver ends - Dimensions.) |
| NF E74-355 | 十字槽頭螺釘用旋轉具.第1部分:旋具尖 | (SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 1 : DRIVERS POINTS.) |
| NF E74-356 | 十字槽頭螺釘用旋具.第2部分:手持式旋具的一般要求、旋具頭長度和標記 | (SCREWDRIVERS FOR CROSS-RECESSED HEAD SCREWS. PART 2 : GENERAL REQUIREMENTS, LENGTHS OF BLADES AND MARKING OF HAND-OPERATED SCREWDRIVERS.) |
| NF E74-360 | 螺釘和螺母用裝配工具.手動和機動螺絲刀的驅動端和連接部件.尺寸和扭矩試驗 | (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.) |
| NF E74-360 | 螺釘和螺母用裝配工具.手動和機動螺絲刀的驅動端和連接部件.尺寸和扭矩試驗 | (Assembly tools for screws and nuts - Drive ends for hand- and machine-operated screwdriver bits and connecting parts - Dimensions, torque testing.) |
| NF E74-361 | 螺釘和螺母用裝配工具.方形旋具.第1部分:手動套筒工具用方形旋具 | (Assembly tools for screws and nuts. Driving squares. Part 1 : driving squares for hand socket tools.) |
| NF E74-362 | 螺釘和螺母用裝配工具.方形旋具.第2部分:電動套筒工具用方形旋具 | (Assembly tools for screws and nuts. Driving squares. Part 2 : driving squares for power socket tools.) |
| NF E74-363-1 | 螺釘和螺母用裝配工具.方形傳動套筒.第1部分:手動套筒.尺寸 | (Assembly tools for screws and nuts. Square drive sockets. Part 1 : hand-operated sockets. Dimensions.) |
| NF E74-363-2 | 螺釘和螺母用裝配工具.方形傳動套筒.第2部分:機動“沖擊“套筒.尺寸 | (Assembly tools for screws and nuts. Square drive sockets. Part 2 : machine-operated sockets “impact“. Dimensions.) |
| NF E74-363-3 | 螺釘和螺母用組合工具.方形驅動套筒.第3部分:機器驅動套筒(無沖擊).尺寸 | (Assembly tools for screws and nuts - Square drive sockets - Part 3 : machine-operated sockets (“non impact“) - Dimensions.) |
| NF E74-365 | 螺釘和螺母用裝配工具.手動方形傳動套筒扳手上的傳動件.尺寸和試驗 | (Assembly tools for screws and nuts. Driving parts for hand-operated square drive socket wrenches. Dimensions and tests.) |
| NF E74-366 | 螺釘和螺母用裝配工具.手動方形傳動套筒扳手上的附件.尺寸和試驗 | (Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests.) |
| NF E74-367 | 螺釘和螺母用裝配工具.機動插頭扳手的方塊傳動加長六角插頭 | (Assembly tools for screws and nuts. Square drive extension hexagon insert, for power socket wrenches.) |
| NF E74-381 | 螺釘和螺母用裝配工具.技術規范.第1部分:手動扳手和套筒 | (Assembly tools for screws and nuts. Technical specifications. Part 1 : hand-operated wrenches and sockets.) |
| NF E82-020 | 模壓鍛造零件.拉緊裝置用燈的螺釘.規范 | (DROP FORGINS. EYEBOLTS FOR TURNBUCKLES. REQUIREMENTS.) |
| NF F01-088 | 鐵路運輸設備.帶有槽端頭和螺紋端頭的未鉆孔軸.頭部鉆孔的螺釘 | (RAILWAY TRANSPORT EQUIPMENT. UNBORED AXLES WITH SLOTTED AND THREADED ENDS. SCREWS WITH DRILLED HEADS.) |
| NF F03-004 | 鐵路車輛.金屬螺釘. 沉頭和半沉頭. Ａ級. 符號Ｆ和ＦＢ | (Railway rolling stock. Grade A. Countersunk and raised countersunk notched head machine screws. Symbols F and FB.) |
| NF F03-005 | 鐵路車輛.金屬螺釘. 圓柱頭和球面圓柱頭. Ａ級. 符號Ｃ和ＣＲ | (Railway rolling stock. Grade A. Notched cheese head or notched dome head machine screws. Symbols C and CR.) |
| NF F03-006 | 鐵路車輛.開槽懦半沉頭螺釘一螺母. Ａ級. 符號ＦＢＰ | (Railway rolling stock. Grade A. Slotted or notched raised countersunk head screws nuts. Symbol FBP.) |
| NF F03-016 | 鐵路車輛.開槽沉頭螺釘, 螺母. Ａ級. ＦＰ | (Railway rolling stock. Grade A. Slotted countersunk head screws nuts. Symbol FP.) |
| NF F10-404 | 鐵路車輛.0.25MN的聯接螺釘 | (Railway transport equipment. Coupling screw of 0,25 mn.) |
| NF F11-003 | 鐵路車輛.手制動. 螺釘和螺母. 螺距和螺紋剖面. 螺釘傳動 | (RAILWAY TRANSPORT EQUIPMENT. HAND BRAKE. SCREWS AND NUTS. PITCHES AND PROFILES. SCREW DRIVES.) |
| NF F50-006 | 鐵路固定設備.帶可變螺紋的枕木螺絲 | (Railway fixed equipment. Sleeper screws with variable thread.) |
| NF F55-251 | 鐵路固定設備.信號電路.連接和分段器材.螺釘連接部件 | (RAILWAY FIXED EQUIPMENT. SIGNALLING. CIRCUITS. CONNECTING AND BREAKING COMPONENTS. SCREW-TYPE TERMINAL BLOCKS.) |
| NF F56-123 | 鐵路固定設備.通訊和信號裝置架空線路用器材.直徑口毫米鍍鋅方頭木螺釘 | (FIXED RAILWAY INSTALLATIONS. EQUIPMENT FOR OVERHEAD TELECOMMUNICATION AND SIGNALLING LINES. GALVANIZED SQUARE HEAD WOOD SCREWS.) |
| NF J41-465 | 造船工業.“金士頓“閥門.螺釘零件 | (SHIPBUILDING. KINGSTON VALVES. BOLTS AND SCREWS.) |
| NF J46-126 | 造船工業.空氣入口.手柄和緊固螺釘 | (SHIPBUILDING. VENTILATORS. HANDLE AND LOCKING SCREW.) |
| NF L22-063 | 用板手操作的螺母、螺釘和軸的間隙 | (CLEARANCE FOR WRENCHING NUTS,SCREWS AND PINS.) |
| NF L22-070 | 螺釘?shù)腂NAE型十字槽 | (CROSS RECESS (B.N.A.E.).) |
| NF L22-071 | NFL ２２-０７０ 型螺釘十字槽用螺絲刀頭 | (SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.) |
| NF L22-071 | NFL ２２-０７０ 型螺釘十字槽用螺絲刀頭 | (SCREW-DRIVER END FOR CROSS RECESS ACCORDING TO NF L 22-070.) |
| NF L22-072 | 航天建筑.螺絲.920型十字槽 | (Aerospace construction. Bolts and screws. 92 degrees cruciform recess.) |
| NF L22-090 | 修配用大直徑標準螺釘、銷和墊圈 | (STANDARDIZED SCREWS,PINS AND WASHERS WITH INCREASED DIAMETER INTENDED FOR REPAIR WORK.) |
| NF L22-111 | 無銷孔六角頭螺釘.國際單位制螺紋 | (Hexagon head bolts without split pin hole. Sim thread (rech.).) |
| NF L22-112 | 帶銷孔六角頭螺釘.國際單位制螺紋 | (Hexagon head bolts with split pin hole. Sim thread (rech.).) |
| NF L22-121 | 帶輕桿無鎖孔六角頭螺釘.國際單位制螺紋 | (Hexagon head bolts with waisted shank without split pin hole. Sim thread (rech.).) |
| NF L22-122 | 帶輕桿有銷孔六角頭螺釘.國際單位米制螺紋 | (Hexagon head bolts with waisted shank with split pin hole. Sim thread.) |
| NF L22-125 | 六角頭承拉螺釘ISO 螺紋４h 類 | (Bolt, hexagonal head, for tensile application, . ISO thread 4H class.) |
| NF L22-126 | 帶鎖緊孔六角頭承拉螺釘.ISO螺紋４h 類 | (Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4H class.) |
| NF L22-127 | 帶頸桿六角頭承拉螺釘.ISO螺 紋４h 類 | (Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4H class.) |
| NF L22-128 | 帶頸桿有鎖緊孔六角頭承拉螺釘.ISO 螺紋４h 類 | (Bolt, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4H class.) |
| NF L22-129 | 帶銷孔六角頭承拉螺釘.ISO 螺紋４h 類 | (Bolt, hexagonal head, with split pin hole, for tensile application. ISO thread 4H class.) |
| NF L22-134 | 無銷孔六角頭槽制螺釘.國際單位制螺紋 | (Precision hexagon head bolts without split pin hole. Sim thread (rech.).) |
| NF L22-135 | 帶銷孔六角頭槽制螺釘.國際單位制螺紋 | (Precision hexagon head bolts with split pin hole. Sim thread (rech.).) |
| NF L22-136 | 通用六角頭螺釘短螺紋 | (Bolt, hexagonal head, current use, short thread.) |
| NF L22-137 | 帶鎖緊孔六角頭短螺紋螺釘 | (Bolt, hexagonal head, with locking hole, short thread.) |
| NF L22-138 | 精密六角頭短螺紋螺釘 | (Bolt, hexagonal head, close tolerance, short thread.) |
| NF L22-139 | 帶鎖緊孔精密頭角頭短螺紋螺釘 | (BOLT,HEXAGONAL HEAD,CLOSE TOLERANCE,WITH LOCKING HOLE,SHORT THREAD.) |
| NF L22-140 | 六角頭全螺紋螺釘 | (Bolt, hexagonal head, threaded to head.) |
| NF L22-141 | 有鎖緊孔方角頭全螺紋螺釘 | (Bolt, hexagonal head, with locking hole, threaded to head.) |
| NF L22-142 | 常用有銷孔六角頭螺釘 | (BOLT,HEXAGONAL HEAD,WITH COTTER PIN HOLE,CURRENT USE.) |
| NF L22-145 | 六角頭承拉螺釘.ISO螺紋4G類 | (Bolt, hexagonal head, for tensile application, ISO thread 4G class.) |
| NF L22-146 | 有鎖緊孔六角頭承拉螺釘.ISO螺紋4G類 | (Bolt, hexagonal head, with locking hole, for tensile application. ISO thread 4G class.) |
| NF L22-147 | 帶頸桿六角頭承拉螺釘.ISO螺紋4G類 | (Bolt, hexagonal head, necked shank, for tensile application. ISO thread 4G class.) |
| NF L22-148 | 帶頸桿有銷緊孔六角頭承拉螺釘.ISO螺紋4G類 | (Bolts, hexagonal head, necked shank, with locking hole, for tensile application. ISO thread 4G class.) |
| NF L22-151 | 開槽圓柱頭螺釘和緊固凸圓頭螺釘.國際單位制螺紋 | (Slotted and drilled cheese head screws. Sim thread (rech.).) |
| NF L22-152 | 開槽扁頭螺釘.國際單位米制螺紋 | (Slotted mushroom head screws. Sim thread (rech.).) |
| NF L22-153 | 90°埋頭開槽螺釘.國際單位米制螺紋 | (Slotted 90 degrees countersunk head screws. Sim thread (rech.).) |
| NF L22-154 | 120°半圓頭開槽埋頭螺釘.單際單位米制螺紋 | (Slotted raised 120 degrees countersunk head screws. Sim thread (rech.).) |
| NF L22-156 | 錐頂凸圓頭開槽螺釘.國際單位米制螺紋 | (Slotted raised cheese head screws with cone point. Sim thread (rech.).) |
| NF L22-157 | 錐頂扁頭開槽螺釘.國際單位米制螺紋 | (Slotted mushroom head screws with cone point. Sim thread (rech.).) |
| NF L22-158 | 錐頂90°埋頭開槽螺釘.國際單位米制螺紋 | (Slotted 90 degrees countersunk head screws with cone point. Sim thread (rech.).) |
| NF L22-159 | 錐頂120°半圓頭開槽埋頭螺釘.國際單位米制螺紋 | (Slotted raised 120 degrees countersunk head screws with cone point. Sim thread (rech.).) |
| NF L22-161 | 有NF L22-72十字槽的通用100°埋頭螺釘 | (Bolt, 100 degrees countersunk head, current use, nf L 22-072 cross recess.) |
| NF L22-162 | 有NF L22-072十字槽的精密100°全螺紋埋頭螺釘 | (Bolt, 100 degrees countersunk head, close tolerance, nf L 22-072 cross recess.) |
| NF L22-163 | 有NF L22-072十字槽的常用100°度全螺紋埋頭螺釘 | (Bolt, 100 degrees countersunk head, threaded to head, nf L 22-072 cross recess.) |
| NF L22-167 | 有NF L22-070十字槽的常用100°埋頭螺釘 | (Bolt, 100 degrees countersunk head, current use, nf L 22-070 cross recess.) |
| NF L22-168 | 有NF L22-070 十字槽的緊公差100°沉頭螺釘 | (BOLT,100 DEGREES COUNTERSUNK HEAD,CLOSE TOLERANCE,NF L 22-070,CROSS RECESS.) |
| NF L22-169 | 有 NF L22-070十字槽的100°全螺紋埋頭螺釘 | (BOLT,100 DEGREES COUNTERSUNK HEAD,THREADED TO HEAD,NF L 22-070,CROSS RECESS.) |
| NF L22-171 | 有NF L22-072十字槽的常用半圓頭螺釘 | (Bolt, pan head, current use, nf L22-072 cross recess.) |
| NF L22-173 | 有NF L22-072十字槽全螺紋半圓頭螺釘 | (BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-072 CROSS RECESS.) |
| NF L22-176 | 有NF L22-072十字槽錐頂半圓頭非磁性螺釘 | (Bolt, pan head, amagnetic with cone point NF L 22-072 cross recess.) |
| NF L22-177 | 有NF L22-070十字槽常用半圓頭螺釘 | (Bolt, pan head, current use, nf L 22-070 cross recess.) |
| NF L22-179 | 有NF L22-070十字槽全螺紋半圓頭螺釘 | (BOLT,PAN HEAD,THREADED TO HEAD,NF L 22-070 CROSS RECESS.) |
| NF L22-181 | 有BNAE十字槽扁頭螺釘.國際單位米制螺紋 | (MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.) |
| NF L22-182 | 有BNAE十字槽90°埋頭螺釘.國際單位米制螺紋 | (90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.) |
| NF L22-183 | 有BNAE十字槽90°埋頭螺釘.國際單位米制螺紋 | (RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.) |
| NF L22-184 | 有BNAE十字槽120°埋頭螺釘.國際單位米制螺紋 | (120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS. SIM THREAD.) |
| NF L22-186 | 有BNAE十字槽錐頂扁頭螺釘.國際單位米制螺紋 | (MUSHROOM HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.) |
| NF L22-187 | 有BNAE十字槽錐頂90°埋頭螺釘.國際單位米制螺紋 | (90 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.) |
| NF L22-188 | 有BNAE十字槽錐頂120°埋頭半圓頭螺釘單國際單位制米螺紋 | (RAISED 120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.) |
| NF L22-189 | 有BNAE十字槽錐頂120°埋頭螺釘.國際單位米制螺紋 | (120 DEGREES COUNTERSUNK HEAD SCREWS WITH B.N.A.E. CROSS RECESS AND CONE POINT. SIM THREAD.) |
| NF L22-201 | 短螺紋精密螺釘.六角頭.ISO螺紋 | (Bolt, hexagonal head, short thread, close tolerance. ISO thread.) |
| NF L22-202 | 短螺紋精密螺釘.帶鎖緊孔六角頭.ISO螺紋 | (Bolt, hexagonal head, short thread, close tolerance with locking hole. ISO thread.) |
| NF L22-205 | 有銷孔常用六角頭螺釘.ISO螺紋 | (Bolt, hexagonal head, with cotter pin hole, current use. ISO thread.) |
| NF L22-206 | 常用六角頭螺釘.ISO螺紋 | (Bolt, hexagonal head, current use. ISO thread.) |
| NF L22-207 | 帶緊鎖孔常用六角頭螺釘.ISO螺紋 | (Bolt, hexagonal head, with locking hole, current use. ISO thread.) |
| NF L22-208 | 全螺紋六角頭螺釘.ISO螺紋 | (Bolt, hexagonal head, threaded to head. ISO thread.) |
| NF L22-209 | 帶緊鎖孔全螺紋六角頭螺釘.ISO螺紋 | (Bolt, hexagonal head, with locking hole threaded to head. ISO thread.) |
| NF L22-220 | 帶緊鎖絲孔內六角圓柱頭螺釘.4H類ISO螺紋 | (Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4H class.) |
| NF L22-221 | 無緊鎖絲孔內六角圓柱頭螺釘.4H類ISO螺紋 | (HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 H CLASS.) |
| NF L22-222 | 帶緊鎖絲孔內六角圓柱頭螺釘.4G類ISO螺紋 | (Hexagonal socket cylindrical head screw with hole for lockwire. ISO thread 4G class.) |
| NF L22-223 | 無緊鎖孔全六角圓柱頭螺釘.4G類ISO螺紋 | (HEXAGON SOCKET HEAD CAP SCREWS WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.) |
| NF L22-224 | 帶緊鎖絲孔全六角圓柱頭全螺紋螺釘.4G類ISO螺紋 | (Hexagonal socket cylindrical head screw, threaded to head, with hole for lockwire. ISO thread 4 G class.) |
| NF L22-225 | 無緊鎖絲孔全六角圓柱頭全螺紋螺釘.4G類ISO螺紋 | (HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED WITHOUT HOLE FOR LOCKING WIRE. ISO THREAD. 4 G CLASS.) |
| NF L22-236 | 航空用螺栓螺母.十二角頭螺釘.使用溫度在高于235℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS.) |
| NF L22-237 | 航空用螺栓螺母.帶鎖緊孔十二角頭螺釘.使用溫度在高于235℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS.) |
| NF L22-246 | 航空用螺栓螺母.十二角頭螺釘.細螺距.使用溫度高于在２３５℃ | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD. ISO M THREAD. 4G CLASS. FINE PITCH.) |
| NF L22-247 | 航空用螺檢螺母.十二角頭螺釘.細螺距帶鎖緊孔.使用溫度在高于２３５℃以上 | (AIRCRAFT BOLTS AND NUTS. BOLT,BIHEXAGONAL HEAD,WITH LOCKING HOLE. ISO M THREAD. 4G CLASS. FINE PITCH.) |
| NF L22-251 | 航空用ISO螺紋螺拴螺母.AICMA十字槽“通用”１００°沉頭螺釘 | (GENERAL PURPOSE 100 DEGREES COUNTERSUNK HEAD SCREWS WITH A.I.C.M.A. CROSS RECESS.) |
| NF L22-252 | 航空用螺拴螺母.短螺紋精密螺釘.AICMA十字槽１００°埋頭螺釘 | (PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,A.I.C.M.A. CROSS RECESS.) |
| NF L22-256 | 航空用螺拴螺母.AICMA十字槽全螺紋１００°埋頭螺釘.ISO螺紋 | (AIRCRAFT FASTENERS. 100 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED,A.I.C.M.A. CROSS RECESS.) |
| NF L22-257 | 航空用螺拴螺母.BNAE 十字槽“通用”１００°埋頭螺釘.ISO螺紋 | (General purpose 100 degrees countersunk head screws,B.N.A.E. Cross recess. ISO thread.) |
| NF L22-258 | 航空用螺拴螺母.BNAE 十字槽１００°短螺紋精密埋頭螺釘 | (AIRCRAFT FASTENERS. PRECISION 100 DEGREES COUNTERSUNK HEAD SCREWS WITH SHORT THREAD,B.N.A.E. CROSS RECESS.) |
| NF L22-259 | 航空用螺拴螺母.BNAE 十字槽１００°全螺紋埋頭螺釘.ISO螺紋 | (100 degrees countersunk head screws, fully threaded B.N.A.E. Cross recess. ISO thread.) |
| NF L22-271 | 航空用螺拴螺母.AICMA 十字槽半圓頭螺釘 | (AIRCRAFT FASTENERS. PAN HEAD SCREWS,WITH A.I.C.M.A. CROSS RECESS.) |
| NF L22-272 | 航空用ISO螺紋螺拴螺母.AICMA 十字槽全螺紋半圓頭螺釘 | (AIRCRAFT FASTENERS. PAN HEAD SCREWS,FULLY THREADED,WITH A.I.C.M.A. CROSS RECESS.) |
| NF L22-273 | 航空用螺拴螺母.十字槽錐頂半圓頭非磁性螺釘 | (AIRCRAFT FASTENERS. NON-MAGNETIC PAN HEAD SCREWS WITH TRUNCATED CONE POINT. CROSS RECESS.) |
| NF L22-274 | 航空用螺拴螺母.BNAE十字槽半圓頭螺釘.ISO螺紋 | (Pan head screws,B.N.A.E. Cross recess. ISO thread.) |
| NF L22-277 | 航空用螺拴螺母.溫度在260℃以上用全螺紋緊旋圓柱頭螺釘 | (DRILLED CHEESE HEAD SCREWS,FULLY THREADED,FOR TEMPERATURES ABOVE 260 DEGREES C.) |
| NF L22-291 | 全螺紋開槽９０度埋頭螺釘.ISO螺紋 | (SLOTTED 90 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-292 | 全螺紋開槽６０度埋頭螺釘.ISO螺紋 | (SLOTTED 60 DEGREES COUNTERSUNK HEAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-293 | 全螺紋開槽圓頭螺釘.ISO螺紋 | (SLOTTED CHEESE EHAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-296 | 全螺紋開槽緊旋圓柱頭螺釘.ISO螺紋 | (SLOTTED AND DRILLED CHEESE HEAD SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-298 | 全螺紋凹六角圓柱頭螺釘.ISO螺紋 | (HEXAGON SOCKET HEAD CAP SCREWS,FULLY THREADED. ISO THREAD.) |
| NF L22-305 | 無頭平頂凸六角螺釘.ISO螺紋 | (HEXAGON SOCKET SET SCREWS,FLAT POINT. ISO THREAD.) |
| NF L22-306 | 半制動端六角凹頭止動螺釘.ISO螺紋 | (HEXAGON SOCKET SET SCREWS,HALF DOG POINT. ISO THREAD.) |
| NF L22-307 | 無頭凹頂凹六角螺釘ISO螺紋 | (HEXAGON SOCKET SET SCREWS,CUP POINT. ISO THREAD.) |
| NF L22-308 | 無頭尖頂凹六角螺釘.ISO螺紋 | (HEXAGON SOCKET SET SCREWS,CONE POINT. ISO THREAD.) |
| NF L22-309 | 無頭截錐頂凹六角螺釘.ISO螺紋 | (HEXAGON SOCKET SET SCREWS,TRUNCATED CONE POINT. ISO THREAD.) |
| NF L24-020 | 航空和航天.1100MPa強度級和MJ螺紋合金鋼螺釘.供應品的規范 | (AEROSPACE. ALLOY STEEL BOLTS WITH STRENGTH CLASSIFICATION 1100 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-025 | 航天.突出頭合金鋼螺釘.1250MPa強度的等級和MJ螺紋.供應品的規范 | (AEROSPACE. ALLOY STEEL PROTRUDING HEAD BOLTS WITH STRENGTH CLASSIFICATION 1250 MPA AND MJ THREADS. PROCUREMENT SPECIFICATION.) |
| NF L24-109 | 航空航天系列.陽極化MOS2潤滑鈦合金制標準六角頭、螺紋頭螺絲.等級:1100MPA(室溫)/315℃(歐洲標準EN 3308) | (AEROSPACE SERIES. SCREWS, NORMAL HEXAGONAL HEAD, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3308).) |
| NF L24-113 | 航空航天系列.鍍銀FE-PA92HT(A286)耐高溫鋼制螺紋到底部的六角螺釘.分類:900MPa(室溫下)/650℃ | (AEROSPACE SERIES. SCREWS, HEXAGON HEAD, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2938).) |
| NF L24-114 | 航空和航天系列.耐熱鋼FE-PA92HT(A286)用100°埋頭螺釘,偏置式十字形凹口及螺紋頭.分類.900MPa(室溫)/650℃ | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT RESISTING STEEL FE-PA92HT (A286). CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 CELSIUSGRADE. (NORM EUROPEAN STANDARD EN 2939).) |
| NF L24-115 | 航空航天系列.鍍銀耐熱鋼FE-PA92HT(A286)100°埋頭偏置式十字形凹口螺紋到底部的螺釘.分類.900MPa(室溫)/65 | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK HEAD, OFFSET CRUCIFORM ECESS, THREADED TO HEAD, IN HEAT RESISTING TEEL E-PA92HT(A286),SILVERPLATED.CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2940).) |
| NF L24-117 | 航空和航天.耐高溫鋼FE-PA92HT(A286)制鍍銀長螺紋細桿六角螺絲釘.等級900MPa(室溫下)/650℃ | (AEROSPACE SERIES. BOLTS, HEXAGON HEAD, RELIEVED SHANK, LONG THREAD, IN HEAT RESISTING STEEL FE-PA92HT (A286), SILVER PLATED. CLASSIFICATION : 900 MPA (at AMBIENT TEMPERATURE) / 650 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3007).) |
| NF L24-130 | 航空航天系列.合金鋼鍍鎘100度埋頭、槽頭、螺紋頭螺絲.等級:900MPA(室溫)/235℃(歐洲標準EN 2652) | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2652).) |
| NF L24-131 | 航空航天系列.鈍化耐腐蝕鋼100度標準埋頭、槽頭、螺紋頭螺絲.分類:600MPA(環境溫度)/425℃(歐洲標準EN 2653 | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2653).) |
| NF L24-132 | 航空航天系列.鍍錫黃銅100度標準埋頭、槽頭、螺紋頭螺絲.分類:380MPA(環境溫度)/80℃(歐洲標準EN 2654) | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TMEPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2654).) |
| NF L24-133 | 航空和航天系列.100度通用沉頭,偏移十字槽,緊配合普通柄,短螺紋,鍍鎘,合金鋼制螺絲.等級:1100MPA(室溫下)/2 | () |
| NF L24-134 | 航空和航天系列.100度減徑沉頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,MOS2潤滑,鈦合金制螺絲.等級:1100MP | () |
| NF L24-135 | 航空和航天系列.100度減徑沉頭,偏移十字槽,緊配合普通柄,短螺紋,鍍鎘,合金鋼制螺絲.等級:1100MPA(室溫下)/2 | () |
| NF L24-136 | 航空和航天系列.陽極化MOS2潤滑鈦制100度標準埋頭偏移十字槽、螺紋頭螺絲.等級:1100MPA(室溫下)/315℃(歐洲 | (AEROSPACE SERIES. SCREWS, 100 DEGREES COUNTERSUNK NORMAL HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3306).) |
| NF L24-137 | 航空和航天系列.100度通用沉頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,鈦制螺絲.等級:1100MPA(室溫下)/315 | () |
| NF L24-138 | 航空和航天系列.鈍化耐熱耐腐蝕鋼制100度標準埋頭偏移十字槽緊公差標準柄短螺紋螺絲.等級:1100MPA(室溫下)/ | () |
| NF L24-139 | 航空和航天系列.100度通用沉頭,偏移十字槽,螺紋到頂部,鈍化,高溫耐蝕鋼制螺絲.等級:1100MPA(室溫下)/425℃ | () |
| NF L24-161 | 航空和航天系列.合金鋼鍍鎘矩形頂蓋六角形承口粗公差標準柄中等長度螺紋螺絲.等級:1100MPA(室溫下)/235℃( | (AEROSPACE SERIES. SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3303).) |
| NF L24-180 | 航空航天系列.鈍化耐腐蝕鋼盤形頭、槽頭、螺紋頭螺絲.分類:600MPA(環境溫度)/425℃(歐洲標準EN 2650) | (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 600 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2650).) |
| NF L24-181 | 航空航天系列.鍍錫黃銅盤形頭、槽頭、螺紋頭螺絲.分類:380MPA(環境溫度)/80℃(歐洲標準EN 2651) | (AEROSPACE SERIES. SCREWS, PAN HEAD, SLOTTED, THREADED TO HEAD, IN BRASS, TIN PLATED. CLASSIFICATION : 380 MPA (AT AMBIENT TEMPERATURE) / 80 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2651).) |
| NF L24-182 | 航空和航天.用MoS2潤滑,陽極化,鈦合金制,短螺紋,帶翼型十字槽的平頭螺釘.等級:1100MPa(室溫下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1 100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2884).) |
| NF L24-183 | 航空和航天.鍍鎘,合金鋼制,短螺紋,帶翼型十字槽的平頭螺釘.等級:900MPa(室溫下)/235℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, COARSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2885).) |
| NF L24-184 | 航空和航天系列.鍍鎘合金鋼制短螺紋緊公差標準柄帶翼型十字槽的盤形頭螺絲.分類:900MPa(環境溫度)/235℃(歐 | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRICUFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 900 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2886).) |
| NF L24-185 | 航空和航天系列.鍍鎘合金鋼制短螺紋緊公差標準柄帶翼型十字槽的盤形頭螺絲.分類:1100MPa(環境溫度)/235℃( | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 235 DEGREES CELSIUS. (EUROPEAN STANDARD EN 2897).) |
| NF L24-186 | 航空和航天系列.平頭,偏移十字槽,緊配合普通柄,短螺紋,陽極化,MOS2潤滑,鈦合金鋼制螺絲.等級:1100MPA(室溫 | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3037).) |
| NF L24-187 | 航空和航天系列.平頭,偏移十字槽,緊配合普通柄,短螺紋,鈍化,高溫耐蝕鋼制螺絲.等級:1100MPA(室溫下)/425℃ | () |
| NF L24-188 | 航空和航天系列.平頭,偏移十字槽,螺紋到頂部,陽極化,MOS2潤滑,鈦合金鋼制螺絲.等級:1100MPA(室溫下)/315℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN TITANIUM ALLOY, ANODIZED, MOS2 LUBRICATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 315 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3307).) |
| NF L24-189 | 航空和航天系列.平頭,偏移十字槽,螺紋到頂部,鈍化,高溫耐蝕鋼制螺絲.等級:1100MPA(室溫下)/425℃ | (AEROSPACE SERIES. SCREWS, PAN HEAD, OFFSET CRUCIFORM RECESS, THREADED TO HEAD, IN HEAT AND CORROSION RESISTING STEEL, PASSIVATED. CLASSIFICATION : 1100 MPA (AT AMBIENT TEMPERATURE) / 425 DEGREES CELSIUS. (EUROPEAN STANDARD EN 3759).) |
| NF L24-212 | 航空和航天.耐高溫鋼FE-FA92HT(A286)制鍍銀長螺紋細螺桿十二角螺絲釘.等級:900 Mpa(室溫外)/650℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-221 | 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制長螺紋細螺桿十二角螺絲釘.等級:1275 Mpa(室溫外)/650℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-222 | 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制鍍銀長螺紋細螺桿十二角螺絲釘.等級:1275 Mpa(環境溫度) | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1 275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-225 | 航空航天.加高螺母用耐高溫鎳基合金NI-P101HT(WASPALOY)中長螺紋緊公差十二角螺絲釘.分類:1210Mpa(室溫)/73 | (Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), for increased height nuts. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-231 | 航空和航天.耐高溫鎳基合金NI-P100HT(因康鎳 718)制長螺紋細螺桿十二角螺絲釘.等級:1210 Mpa(室溫外)/730℃ | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-232 | 航空和航天.耐高溫鎳基合金NI-P101HT(Waspaloy 一種耐高溫?zé)徭嚮辖?制鍍銀長螺紋細螺桿十二角螺絲釘.等級 | (Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1 210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-382 | 航空和航天.耐高溫鋼FE-PA92HT(A286)制鍍銀長螺紋細螺桿T字頭螺絲釘.等級:900 Mpa(室溫外)/650℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting steel fe-PA92HT (A286), silver plated. Classification : 900 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-383 | 航空和航天.耐高溫鎳基合金NI-P100HT(INCONE/718)長螺紋細螺桿T字頭螺絲釘.分類:1275 Mpa(室溫下)/650℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718). Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-384 | 航空和航天.耐高溫鎳基合金NI-P100HT(INCONE/718)鍍銀長螺紋細螺桿T字頭螺絲釘.分類:1275 Mpa(室溫下)/650 | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P100HT (inconel 718), silver plated. Classification : 1275 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L24-385 | 航空和航天.耐高溫鎳基合金NI-P101HT(WASPALOY)長螺紋細螺桿T字頭螺絲釘.分類:1210 Mpa(室溫下)/730℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy). Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-386 | 航空和航天.耐高溫鎳基合金NI-P101HT(WASPALOY)鍍銀長螺紋細螺桿T字頭螺絲釘.分類:1210 Mpa(室溫下)/730℃ | (Aerospace series. Bolts, T-head, relieved shank, long thread, in heat resisting nickel base alloy ni-P101HT (waspaloy), silver plated. Classification : 1210 MPa (at ambient temperature) / 730 degrees celsius.) |
| NF L24-675 | 航空和航天系列.耐熱鋼FE-PA92HT用自鎖定螺釘體螺母.分類.1100MPa(室溫)/650℃ | (Aerospace series. Shank nuts, self-locking, in heat resisting steel fe-PA92HT (A286). Classification : 1100 MPa (at ambient temperature) / 650 degrees celsius.) |
| NF L43-213 | 環形接頭的雙外螺絲接頭 | (DOUBLE UNIONS FOR CYLINDRICAL UNION.) |
| NF L43-586 | 螺釘固定光滑接頭.ISO 螺紋剖面和公差 | (PLUG-IN UNIONS,TUBE END. ISO THREAD PROFILE AND TOLERANCES.) |
| NF R13-107 | 發電機電磁調節器.螺釘固定 | (ELECTROMAGNETIC REGULATORS FOR GENERATORS. SCREW MOUNTING.) |
| NF R93-183 | 電阻電焊鋼螺釘、螺栓和螺母機械特性 | (MECHANICAL CHARACTERISTICS OF STEEL RESISTANCE WELDING SCREWS,STUDS AND NUTS.) |
| NF S52-707 | 高山雪橇.雪橇緊固螺釘.要求 | (ALPINE SKIS. SKI BINDING SCREWS. REQUIREMENTS.) |
| NF S52-712 | 高山雪撬.雪撬緊定螺釘.試驗方法 | (Alpine skis. Ski binding srews. Test methods.) |
| NF S52-724 | 越野滑雪.雪橇捆扎螺釘.要求 | (CROSS-COUNTRY SKIS. SKI BINDING SCREWS. REQUIREMENTS.) |
| NF S52-734 | 高山滑雪.捆扎部位.試驗螺釘?shù)囊? | (ALPINE SKIS. BINDING MOUNTING AREA. REQUIREMENTS FOR TEST SCREWS.) |
| NF S52-735 | 越野滑雪.捆扎部位.試驗螺釘?shù)囊? | (CROSS-COUNTRY SKIS. BINDING MOUNTING AREA. REQUIREMENTS FOR TEST SCREWS.) |
| NF S90-411 | 外科醫療器械.外科植入物.不對稱螺紋和球形底座的接骨用金屬螺釘.尺寸 | (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. OSTEOSYNTHESIS METAL SCREWS WITH ASYMMETRICAL THREAD AND SPHERICAL UNDER-SURFACE. DIMENSIONS.) |
| NF S90-414 | 外科醫療器械.外科植入物.不對稱螺紋和球形底座接骨用不銹鋼螺絲.機械性能和試驗 | (MEDICO-SURGICAL EQUIPMENT. IMPLANTS FOR SURGERY. STAINLESS STEEL OSTEOSYNTHESIS SCREW WITH ASYMMETRICAL THREAD AND SPHERICAL FITTING. MECHANICAL REQUIREMENTS AND TESTING.) |
| NF S90-421 | 外科植入物.接骨用金屬螺釘.尺寸 | (Implants for surgery. Metal bone screws with conical under-surfaces. Dimensions.) |
| NF S90-422 | 外科植入物.接骨用金屬板.圓錐形螺絲用的鋁孔和擴孔 | (IMPLANTS FOR SURGERY. METAL BONE PLATES. HOLES AND SLOTS CORRESPONDING TO SCREWS WITH CONICAL UNDER-SURFACE.) |
| NF S90-511 | 外科醫療器械.矯形和假肢組件.帶凸耳的凸圓頭開槽全螺紋螺釘 | (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD. FULLY THREADED.) |
| NF S90-512 | 外科醫療器械.矯形和假肢組件.帶凸耳的平圓頭開槽合螺紋螺釘 | (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH FLAT SLOTTED CHEESEHEAD FULLY THREADED.) |
| NF S90-513 | 外科醫療器械.矯形和假肢組件.帶安裝邊的凸圓頭半螺紋連接螺釘 | (MEDICAL AND SURGICAL EQUIPMENT. COMPONENTS FOR ARTIFICIAL LIMBS AND JOINTS. JOINT SCREW WITH RAISED SLOTTED CHEESEHEAD AND FLANGE,PARTLY THREADED.) |
| NF S91-129 | 拔牙鉗.第1部分:螺釘和鉸鏈接合型 | (Dental extraction forceps. Part 1 : screw and pin joint types.) |
| 編號 | 中文名稱 | 英文名稱 |