微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| IEC 60092-204 | 船舶電氣設施 第204部分:系統設計 電動和電動液壓操舵裝置 | Electrical installations in ships. Part 204 : System design. Electric and electrohydraulic steering gear |
| IEC 62237 | 帶電作業.液壓工具和設備用帶配件的絕緣軟管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| ISO 10100 | 液壓傳動 缸筒 驗收試驗 | Hydraulic fluid power - Cylinders - Acceptance tests |
| ISO 10262 | 土方機械 液壓挖掘機 司機防護裝置的實驗室試驗和性能要求 | Earth-moving machinery - Hydraulic excavators - Laboratory tests and performance requirements for operator protective guards |
| ISO 10332 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 驗證液壓防泄漏用超聲波檢驗 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; ultrasonic testing for verification of hydraulic leak-tightness |
| ISO 10372 | 液壓傳動 四油口和五油口伺服閥 安裝面 | Hydraulic fluid power; four- and five-port servovalves; mounting surfaces |
| ISO 10448 | 農業拖拉機 器具用液壓動力 | Agricultural tractors - Hydraulic pressure for implements |
| ISO 10567 | 土方機械 液壓挖掘機 提升能力 | Earth-moving machinery; hydraulic excavators; lift capacity |
| ISO 10592 | 小艇 液壓操舵系統 | Small craft - Hydraulic steering systems |
| ISO 10762 | 液壓傳動 缸筒安裝尺寸 10 MPa(100 bar)系列 | Hydraulic fluid power - Cylinder mounting dimensions - 10 MPa (100 bar) series |
| ISO 10763 | 液壓傳動 端面平齊的無縫和焊接型精密鋼管 尺寸及標稱工作壓力 | Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures |
| ISO 10767-1 | 液壓傳動 系統和元件產生壓力波動值的測定 第1部分:用于泵的精密方法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 1: Precision method for pumps |
| ISO 10767-2 | 液壓傳動 系統和元件產生壓力波動值的測定 第2部分:用于泵的簡化方法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 2: Simplified method for pumps |
| ISO 10767-3 | 液壓傳動 系統和元件產生壓力波動值的測定 第3部分:用于馬達的方法 | Hydraulic fluid power - Determination of pressure ripple levels generated in systems and components - Part 3: Method for motors |
| ISO 10770-1 | 液壓傳動 電調制液壓控制閥 第1部分:四通流量控制閥的試驗方法 | Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 1: Test methods for four-way directional flow control valves |
| ISO 10770-2 | 液壓傳動 電調制液壓控制閥 第2部分:三通流量控制閥的試驗方法 | Hydraulic fluid power - Electrically modulated hydraulic control valves - Part 2: Test methods for three-way directional flow control valves |
| ISO 10771-1 | 液壓傳動.金屬壓力容器外層的壓力疲勞試驗.第1部分:試驗方法 | Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 1: Test method |
| ISO 10945 | 液壓傳動 充氣蓄能器 氣口尺寸 | Hydraulic fluid power - Gas-loaded accumulators - Dimensions of gas ports |
| ISO 10946 | 液壓傳動 隔離式充氣蓄能器 優先選擇的液壓油口 | Hydraulic fluid power - Gas-loaded accumulators with separator - Selection of preferred hydraulic ports |
| ISO 11158 | 潤滑劑、工業潤滑油和有關產品(L類) H組(液壓系統) HH、HL、HM、HR、HV和HG各品種的規格 | Lubricants, industrial oils and related products (class L) - Family H (hydraulic systems) - Specifications for categories HH, HL, HM, HR, HV and HG |
| ISO 11170 | 液壓傳動.濾芯.性能特性檢驗的試驗序列 | Hydraulic fluid power - Filter elements - Sequence of tests for verifying performance characteristics |
| ISO 11171 Technical Corrigendum 1 | 液壓傳動 液體自動顆粒計數器的校準 技術勘誤1 | Hydraulic fluid power - Calibration of automatic particle counters for liquids; Technical Corrigendum 1 |
| ISO 11171 | 液壓傳動 液體自動顆粒計數器的校準 | Hydraulic fluid power - Calibration of automatic particle counters for liquids |
| ISO 11217 | 航空航天 液壓系統液體污染物 取樣點位置和取樣準則 | Aerospace; hydraulic system fluid contamination; location of sampling points and citeria for sampling |
| ISO 11218 | 航空航天 液壓油液清潔度分級 | Aerospace; cleanliness classification for hydraulic fluids |
| ISO 11237-1 | 橡膠軟管和軟管組件.用于液壓系統的金屬絲編織增強壓實型軟管和軟管組件.規范.第1部分:用于油基液體 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 1: Oil-based fluid applications |
| ISO 11237-2 | 橡膠軟管和軟管組件.用于液壓系統的金屬絲編織增強壓實型軟管和軟管組件.規范.第2部分:用于水基液體 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Part 2: Water-based fluid applications |
| ISO 11425 | 機動車液壓轉向裝置用橡膠軟管和軟管組件 規范 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| ISO 11471 | 農業拖拉機和機械 遙控液壓傳動裝置和控制裝置的編碼 | Agricultural tractors and machinery - Coding of remote hydraulic power services and controls |
| ISO 11500 Technical Corrigendum 1 | 液壓傳動 用遮光法自動計測定顆粒污染物 技術勘誤1 | Hydraulic fluid power - Determination of particulate contamination by automatic counting using the light extinction principle; Technical Corrigendum 1 |
| ISO 11500 | 液壓傳動 用遮光法自動計測定顆粒污染物 | Hydraulic fluid power - Determination of particulate contamination by automatic counting using the light extinction principle |
| ISO 11530 | 道路車輛 液壓千斤頂 規范 | Road vehicles; hydraulic jacks; specifications |
| ISO 11926-1 | 通用和液壓傳動用聯接件 帶ISO 725螺紋和O形圈密封的油口和螺紋端頭 第1部分:锪孔溝槽中裝有O形密封圈的油 | Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 1: Ports with O-ring seal in truncated housing |
| ISO 11926-2 | 通用和液壓傳動用聯接件 帶ISO 725螺紋和O形圈密封的油口和螺紋端頭 第2部分:重型(S 系列)螺栓端頭 | Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 2: Heavy-duty (S series) stud ends |
| ISO 11926-3 | 通用和液壓傳動用聯接件 帶ISO 725螺紋和O形圈密封的油口和螺紋端頭 第3部分:輕型(L 系列)螺栓端頭 | Connections for general use and fluid power - Ports and stud ends with ISO 725 threads and O-ring sealing - Part 3: Light-duty (L series) stud ends |
| ISO 11943 | 液壓傳動 在線液體自動顆粒計數系統 校準和驗證的方法 | Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation |
| ISO 12130-1 | 滑動軸承 靜態條件下液壓斜墊止推滑動軸承 第1部分：斜墊止推軸承的計算 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings |
| ISO 12130-2 | 滑動軸承 靜態條件下液壓斜墊止推滑動軸承 第2部分：斜墊止推軸承的功能 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings |
| ISO 12130-3 | 滑動軸承 靜態條件下液壓斜墊止推滑動軸承 第3部分：斜墊止推軸承計算用指導值 | Plain bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings |
| ISO 12151-1 | 液壓傳動和通用聯接件 軟管接頭 第1部分:帶ISO 8434-3 O形圈端面密封末端的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| ISO 12151-2 | 液壓傳動和通用聯接件.軟管接頭.第2部分:帶ISO 8434-1 O形圈24錐形末端的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings |
| ISO 12151-3 | 液壓傳動和通用聯接件 軟管接頭 第3部分:帶ISO6162法蘭末端的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends |
| ISO 12167-1 | 滑動軸承 靜態條件下帶有排泄槽的液壓滑動軸頸軸承 第1部分：帶有排泄槽的潤滑油滑動軸頸軸承的計算 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
| ISO 12167-2 | 滑動軸承 靜態條件下帶有排泄槽的液壓滑動軸頸軸承 第2部分：帶有排泄槽的潤滑油滑動軸頸軸承的計算用特 | Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings with drainage grooves |
| ISO 12168-1 | 滑動軸承 靜態條件下不帶排泄槽的液壓滑動軸頸軸承 第1部分：不帶排泄槽的潤滑油滑動軸頸軸承的計算 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 12168-2 | 滑動軸承 靜態條件下不帶排泄槽的液壓滑動軸頸軸承 第1部分：不帶排泄槽的潤滑油滑動軸頸軸承的計算用特 | Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for the calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 12333 | 航空航天 連續置換液壓馬達 35000 kPa系統的一般規范 | Aerospace - Constant-displacement hydraulic motors - General specifications for 35000 kPa systems |
| ISO 12334 | 航空航天 帶壓力補償?shù)淖兞髁恳簤罕?35000 kPa系統的一般要求 | Aerospace - Hydraulic, pressure-compensated, variable delivery pumps - General requirements for 35000 kPa systems |
| ISO 12922 Technical Corrigendum 1 | 潤滑劑、工業潤滑油和有關產品(L類) H組(液壓系統) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品種的規格 技術勘 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU; Technical Corrigendum 1 |
| ISO 12922 | 潤滑劑、工業潤滑油和有關產品(L類) H組(液壓系統) HFAE、HFAS、HFB、HFC、HFDR和HFDU各品種的規格 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| ISO 13486-1 | 道路車輛 液壓制動系統 第1部分:雙喇叭口管、螺紋孔、陽螺紋管接頭和管座 | Road vehicles - Hydraulic braking systems - Part 1: Double-flare pipes, tapped holes, male fittings and tube seats |
| ISO 13726 | 液壓傳動 單桿缸、16MPa(160bar)缸徑250mm～500mm的小型系列 附件安裝尺寸 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series with bores from 250 mm to 500 mm - Accessory mounting dimensions |
| ISO 13938-1 | 紡織品 織物脹破特性 第1部分:脹破強力測定的液壓方法 | Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| ISO 13984 | 液壓 道路車輛燃油系統界面 | Liquid hydrogen - Land vehicle fuelling system interface |
| ISO 1402 | 橡膠和塑料軟管和軟管組件 液壓試驗 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing |
| ISO 1436-1 | 橡膠軟管和軟管組件 金屬絲編制物增強液壓管規格 第1部分：油基流體應用 | Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications |
| ISO 1436-2 | 橡膠軟管和軟管組件.金屬絲編織增強液壓類型.規范.第2部分：水基流體設施 | Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications |
| ISO 14617-10 | 圖表用圖形符號.第10部分:液壓變流器 | Graphical symbols for diagrams - Part 10: Fluid power converters |
| ISO 15086-1 | 液壓傳動 部件和系統的流體噪聲特性的測定 第1部分：引言 | Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 1: Introduction |
| ISO 15086-2 | 液壓傳動 元件和系統油液通過孔徑噪聲特性的測定 第2部分:管路油液中聲音速度的測定 | Hydraulic fluid power - Determination of fluid-borne noise characteristics of components and systems - Part 2: Measurement of speed of sound in a fluid in a pipe |
| ISO 15171-1 | 用于流體傳動和一般用途的管接頭 診斷用液壓管接頭 第1部分:非壓力下連接的管接頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 1: Coupling not for connection under pressure |
| ISO 15171-2 | 用于流體傳動和一般用途的管接頭 診斷用液壓管接頭 第2部分:帶M16×2螺紋端的壓力連接接頭 | Connections for fluid power and general use - Hydraulic couplings for diagnostic purposes - Part 2: Coupling with M16 × 2 end for connection under pressure |
| ISO 15363 | 金屬材料 管式環液壓試驗 | Metallic materials - Tube ring hydraulic pressure test |
| ISO 15380 | 潤滑劑、工業用油和相關產品(L類).系列H(液壓系統).HETG, HEPG, HEES 和 HEPR類的規范 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for categories HETG, HEPG, HEES and HEPR |
| ISO 15734 | 小艇 液壓靜力釋放裝置 | Ships and marine technology - Hydrostatic release units |
| ISO 15853 | 熱塑性塑料 為測定注塑用材料的靜液壓強度的管狀試樣的準備 | Thermoplastic materials - Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding |
| ISO 16028 AMD 1 | 液壓傳動.在20MPa(200巴)至31.5MPa(315巴)壓力下使用的平面對接型快速接頭.規范.修改件1 | Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications; Amendment 1 |
| ISO 16028 | 液壓傳動 用于壓力為20 MPa(200 bar)～31.5 MPa(315 bar)的平面對接型快速接頭 規范 | Hydraulic fluid power - Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) - Specifications |
| ISO 16031-1 | 航空航天液壓系統.英制系列O型密封圈:內直徑和橫截面,公差和尺寸認證編碼.第1部分:液壓系統近似公差 | Aerospace fluid systems - O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes - Part 1: Close tolerances for hydraulic systems |
| ISO 16031-2 | 航空航天流體系統.英制系列O型密封圈:內直徑和橫截面、公差和尺寸識別碼.第2部分:非液壓系統的標準公差 | Aerospace fluid systems - O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes - Part 2: Standard tolerances for non-hydraulic systems |
| ISO 16656 | 液壓傳動.10MPa(100 bar)下用的缸徑在32 mm 到 100 mm的單桿、短沖程氣缸.安裝尺寸 | Hydraulic fluid power - Single rod, short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) - Mounting dimensions |
| ISO 16860 | 液壓傳動.過濾器.差壓裝置試驗方法 | Hydraulic fluid power - Filters - Test method for differential pressure devices |
| ISO 16873 AMD 1 | 液壓傳動.壓力開關.安裝表面.修改件1 | Hydraulic fluid power - Pressure switches - Mounting surfaces; Amendment 1 |
| ISO 16873 | 液壓傳動.壓力開關.安裝表面 | Hydraulic fluid power - Pressure switches - Mounting surfaces |
| ISO 16874 | 液壓傳動.歧管及其元件的標識 | Hydraulic fluid power - Identification of manifold assemblies and their components |
| ISO 16889 | 液壓傳動過濾器 評價濾芯過濾性能的多次通過法 | Hydraulic fluid power filters - Multi-pass method for evaluating filtration performance of a filter element |
| ISO 16902-1 | 液壓傳動.用聲強法測定聲功率級的試驗規程:工程法.第1部分:泵 | Hydraulic fluid power - Test code for the determination of sound power levels using sound intensity techniques: Engineering method - Part 1: Pumps |
| ISO 17559 | 液壓流體動力.電控液壓泵.性能特征測定的試驗方法 | Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics |
| ISO 17567 | 農業和林業用拖拉機和全套工具.超液壓動力 | Agricultural and forestry tractors and implements - Hydraulic power beyond |
| ISO 18413 | 液壓傳動.部件和元件的清潔度.與污物收集、分析和數據報告相關的檢驗文件和原則 | Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaminant collection, analysis and data reporting |
| ISO 19879 | 液壓和一般用途用金屬管連接件.液壓傳動連接件的試驗方法 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections |
| ISO 20401 Technical Corrigendum 1 | 氣動液壓驅動系統.方向控制閥.直徑在8mm到12mm的圓形電連接器管腳分布的規范.技術勘誤1 | Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm; Technical Corrigendum 1 |
| ISO 20401 | 氣動液壓驅動系統.方向控制閥.直徑在8mm到12mm的圓形電連接器管腳分布的規范 | Pneumatic fluid power systems - Directional control valves - Specification of pin assignment for electrical round connectors of diameters 8 mm and 12 mm |
| ISO 2057 | 農業拖拉機 拖掛農具的遙控液壓缸 | Agricultural tractors; Remote control hydraulic cylinders for trailed implements |
| ISO 20763 | 石油和相關產品.液壓液耐磨性的測定.葉輪泵法 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method |
| ISO 20843 | 石油和相關產品.HFAE、HFAS和HFC類別中抗燃液壓油pH值的測定 | Petroleum and related products - Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC |
| ISO 2941 | 液壓傳動 濾芯 抗破裂性的驗證 | Hydraulic fluid power; Filter elements; Verification of collapse/burst resistance |
| ISO 2942 | 液壓傳動.濾芯.結構完整性的驗證和第一氣泡點的測定 | Hydraulic fluid power - Filter elements - Verification of fabrication integrity and determination of the first bubble point |
| ISO 2943 | 液壓傳動 濾芯 材料和油液相溶性的驗證 | Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids |
| ISO 3019-1 | 液壓傳動 活塞泵和馬達的安裝法蘭和軸端的尺寸和標識碼 第1部分：用米制單位表示的英制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 1: Inch series shown in metric units |
| ISO 3019-2 | 液壓傳動 活塞泵和馬達的安裝法蘭和軸端的尺寸和標識碼 第2部分：米制系列 | Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors - Part 2: Metric series |
| ISO 3174 | 航空器 用地面設備檢查液壓系統的連接接頭 螺紋式 | Aircraft - Connections for checking hydraulic systems by ground appliances - Threaded type |
| ISO 3323 | 航空器 液壓組件 表明液壓組件被批準適用油液的標志 | Aircraft; Hydraulic components; Marking to indicate fluid for which component is approved |
| ISO 3662 | 液壓傳動 泵和馬達 幾何排量 | Hydraulic fluid power; Pumps and motors; Geometric displacements |
| ISO 3722 | 液壓傳動 油液取樣容器 凈化方法的鑒定和控制 | Hydraulic fluid power; Fluid sample containers; Qualifying and controlling cleaning methods |
| ISO 3723 | 液壓傳動 濾芯 端載荷試驗方法 | Hydraulic fluid power; Filter elements; Method for end load test |
| ISO 3724 | 液壓傳動 濾芯 流動疲勞特性的驗證 | Hydraulic fluid power; Filter elements; Verification of flow fatigue characteristics |
| ISO 3803 | 道路車輛 制動裝置的液壓試驗連接 | Road vehicles; Hydraulic pressure test connection for braking equipment |
| ISO 3862-1 | 橡膠軟管和軟管組件 覆蓋螺旋金屬絲的橡膠增強液壓軟管 規范 第1部分：油基流體的應用 | Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications |
| ISO 3862-2 | 橡膠軟管和軟管組件.橡膠包覆的螺旋金屬絲增強液壓類型.規范.第2部分：水基流體設施 | Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications |
| ISO 3938 | 液壓傳動 污染分析 報告分析數據的方法 | Hydraulic fluid power; Contamination analysis; Method for reporting analysis data |
| ISO 3949 | 塑料軟管和軟管組件.織物增強型液壓軟管.規范 | Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification |
| ISO 3968 Technical Corrigendum 1 | 液壓傳動.過濾器.壓降與流量特性關系的測定.技術勘誤:1 | Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics; Technical Corrigendum 1 |
| ISO 3968 | 液壓傳動 過濾器 壓降與流量特性關系的評估 | Hydraulic fluid power - Filters - Evaluation of differential pressure versus flow characteristics |
| ISO 3996 | 道路車輛 使用非石油基制動液的液壓制動系統軟管組件 | Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| ISO 4021 | 液壓傳動 顆粒污染分析 從工作系統管路中提取油樣 | Hydraulic fluid power; particulate contamination analysis; extraction of fluid samples from lines of an operating system |
| ISO 4038 | 道路車輛 液壓制動系統 單喇叭口管、螺孔和陽螺紋接頭和軟管管端接頭 | Road vehicles - Hydraulic braking systems - Simple flare pipes, tapped holes, male fittings and hose end fittings |
| ISO 4079-1 | 橡膠軟管和軟管組件 織物增強液壓軟管 規范 第1部分：油基流體的應用 | Rubber hoses and hose assemblies - Textile-reinforced hydraulic types; Specification - Part 1: Oil-based fluid applications |
| ISO 4079-2 | 橡膠軟管和軟管組件.織物增強液壓型.規范.第2部分:水基流體的應用 | Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Part 2: Water-based fluid applications |
| ISO 4126-4 | 過壓保護安全設備.第4部分:液壓控制安全閥 | Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves |
| ISO 4263-2 | 石油及相關產品.防腐蝕礦物油和液體老化性的測定.TOST試驗.第2部分:HFC類液壓液測定規程 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 2: Procedure for category HFC hydraulic fluids |
| ISO 4263-3 | 石油及相關產品.防腐蝕礦物油和液體老化性的測定.TOST試驗.第2部分:合成液壓液的無水程序 | Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids |
| ISO 4391 | 液壓傳動 泵、馬達和整體式傳動裝置 參數定義和字母符號 | Hydraulic fluid power; Pumps, motors and integral transmissions; Parameter definitions and letter symbols |
| ISO 4392-1 | 液壓傳動.馬達特性的測定.第1部分:在恒低速和恒壓力下的測定 | Hydraulic fluid power - Determination of characteristics of motors - Part 1: At constant low speed and constant pressure |
| ISO 4392-2 | 液壓傳動.馬達特性的測定.第2部分:起動性 | Hydraulic fluid power - Determination of characteristics of motors - Part 2: Startability |
| ISO 4392-3 | 液壓傳動 馬達特性的測定 第3部分:在恒流量和恒轉矩下 | Hydraulic fluid power; determination of characteristics of motors; part 3: at constant flow and at constant torque |
| ISO 4401 | 液壓傳動.四油口定向控制閥.裝配面 | Hydraulic fluid power - Four-port directional control valves - Mounting surfaces |
| ISO 4404-1 | 石油及有關產品 耐火液壓油液的抗腐蝕性的測定 第1部分：含水油液 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids |
| ISO 4404-2 | 石油和相關產品.難燃液壓液抗腐蝕性的測定.第2部分:不含水油液 | Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids |
| ISO 4405 | 液壓傳動 油液污染度 采用重量法測定顆粒污染度 | Hydraulic fluid power; fluid contamination; determination of particulate contamination by the gravimentric method |
| ISO 4406 | 液壓傳動 油液 固體顆粒污染等級代號法 | Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles |
| ISO 4407 | 液壓傳動.液壓液污染.用光學顯微鏡計數法測定粒狀物污染 | Hydraulic fluid power - Fluid contamination - Determination of particulate contamination by the counting method using an optical microscope |
| ISO 4409 | 液壓傳動 容積式泵、馬達和整體式傳動裝置 穩態性能測定 | Hydraulic fluid power; Positive displacement pumps, motors and integral transmissions; Determination of steady-state performance |
| ISO 4411 | 液壓傳動 閥 壓差/流量特性的測定 | Hydraulic fluid power; Valves; Determination of pressure differential/flow characteristics |
| ISO 4412-1 | 液壓傳動 空氣噪聲級測定的試驗規范 第1部分:泵 | Hydraulic fluid power; test code for determination of airborne noise levels; part 1: pumps |
| ISO 4412-2 | 液壓傳動 空氣噪聲級測定的試驗規范 第2部分:馬達 | Hydraulic fluid power; test code for determination of airborne noise levels; part 2: motors |
| ISO 4412-3 | 液壓傳動 空氣噪聲級測定的試驗規范 第3部分:泵 采用平行六面體傳聲器陣列的方法 | Hydraulic fluid power; test code for determination of airborne noise levels; part 3: pumps; method using a parallelepiped microphone array |
| ISO 4413 | 液壓傳動 與系統相關的一般規則 | Hydraulic fluid power - General rules relating to systems |
| ISO 4548-5 | 內燃機全流式機油濾清器試驗方法 第5部分:冷起動模擬和液壓脈沖耐久性試驗 | Methods of test for full-flow lubricating oil filters for internal combustion engines; part 5: cold start simulation and hydraulic pulse durability test |
| ISO 4925 | 道路車輛.液壓系統用非石油基制動液的規范 | Road vehicles - Specification of non-petroleum-base brake fluids for hydraulic systems |
| ISO 4926 | 道路車輛 液壓制動系統 非石油基基準液 | Road vehicles; Hydraulic brake systems; Non-petroleum base reference fluids |
| ISO 4927 | 道路車輛.使用非石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度120℃) | Road vehicles - Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 °C max.) |
| ISO 4929 | 道路車輛 使用非石油基液壓制動液的液壓制動主液壓缸儲油器的膜片密封墊 | Road vehicles; Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
| ISO 4930 | 道路車輛.使用非石油基液壓制動液的液壓制動盤式液壓缸的彈性密封墊(最高工作溫度150℃) | Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150° C max.) |
| ISO 5198 | 離心泵、混流泵和軸流泵 液壓性能試驗規范 精密級 | Centrifugal, mixed flow and axial pumps; Code for hydraulic performance tests; Precision grade |
| ISO 5596 | 液壓傳動 隔離式充氣蓄能器 壓力、容積范圍和特性量 | Hydraulic fluid power - Gas-loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities |
| ISO 5597 | 液壓傳動 缸筒 往復用活塞和活塞桿密封溝槽 尺寸和公差 | Hydraulic fluid power; Cylinders; Housings for piston and rod seals in reciprocating applications; Dimensions and tolerances |
| ISO 5669 | 農業掛車和掛車設備 制動液壓缸 規范 | Agricultural trailers and trailed equipment; Braking cylinders; Specifications |
| ISO 5670 | 農業掛車 單向作用的伸縮傾翻式液壓缸 25 MPa(250巴)系列 1、2和3型 互換性尺寸 | Agricultural trailers; Single-acting telescopic tipping cylinders; 25 MPa (250 bar) series; Types 1, 2 and 3; Interchangeability dimensions |
| ISO 5675 | 農業拖拉機和機械 一般用途快速液壓接頭 | Agricultural tractors and machinery; general purpose quick-action hydraulic couplers |
| ISO 5676 | 農林用拖拉機和機械 液壓接頭 制動回路 | Tractors and machinery for agriculture and forestry; Hydraulic coupling; Braking circuit |
| ISO 5682-2 | 作物保護設備 噴霧設備 第2部分:液壓噴霧機的試驗方法 | Equipment for crop protection - Spraying equipment - Part 2: Test methods for hydraulic sprayers |
| ISO 5682-3 | 作物保護設備 噴霧設備 第3部分:農業液壓噴霧器每公頃施藥體積量調節系統的試驗方法 | Equipment for crop protection - Spraying equipment - Part 3: Test method for volume/hectare adjustment systems of agricultural hydraulic pressure sprayers |
| ISO 5781 | 液壓傳動 壓力控制閥(不包括溢流閥)、順序閥、卸荷閥、節流閥和單向閥 安裝面 | Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces |
| ISO 5783 | 液壓傳動 閥安裝面和插裝閥孔的標識規則 | Hydraulic fluid power - Code for identification of valve mounting surfaces and cartridge valve cavities |
| ISO 5859 | 航空航天 液壓氣動系統和組件原理圖用圖形符號 | Aerospace; graphic symbols for schematic drawings of hydraulic and pneumatic systems and components |
| ISO 5884 | 航空航天 流體系統和組件 液壓油液固體顆粒污染的系統取樣和測量方法 | Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| ISO 6015 | 土方機械.液壓挖掘機和反鏟裝載機.挖掘力的測量方法 | Earth-moving machinery - Hydraulic excavators and backhoe loaders - Methods of determining tool forces |
| ISO 6020-1 | 液壓傳動 單桿缸安裝尺寸,16 MPa(160 bar)系列 第1部分:中型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 1: Medium series |
| ISO 6020-2 | 液壓傳動.單桿缸安裝尺寸,16 MPa(160 bar)系列.第2部分:小型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 2: Compact series |
| ISO 6020-3 | 液壓傳動 單桿缸安裝尺寸,16 MPa(160 bar)系列 第3部分:缸內徑250mm～500mm的小型系列 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series - Part 3: Compact series with bores from 250 mm to 500 mm |
| ISO 6022 | 液壓傳動.25 MPa (250 bar)系列單桿缸的安裝尺寸 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 6072 | 液壓傳動.流體和標準合成橡膠材料間的兼容性 | Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials |
| ISO 6117 | 道路車輛.使用非石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度100℃) | Road vehicles - Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 °C max.) |
| ISO 6118 | 道路車輛.使用非石油基制動液的液壓制動促動缸的彈性皮碗和密封圈(最高工作溫度70℃) | Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 °C max.) |
| ISO 6120 | 道路車輛.使用石油基液壓液的液壓制動系統制動軟管總成 | Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid |
| ISO 6149-1 | 用于液壓流體傳動和一般用途的管接頭.帶ISO 261螺紋和O形圈密封的油口和螺紋端頭.第1部分:帶锪孔溝槽中裝有 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal |
| ISO 6149-2 | 用于液壓傳動和一般用途的管接頭.帶ISO 261螺紋和O形圈密封的油口和螺紋端頭.第2部分:重型(S系列)螺柱端頭 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends |
| ISO 6149-3 | 用于液壓傳動和一般用途的管接頭.帶ISO 261螺紋和O形圈密封的油口和螺紋端頭.第3部分:輕型(L系列)螺柱端頭 | Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends |
| ISO 6162-1 Technical Corrigendum 1 | 液壓傳動.帶分離式或一體式法蘭夾和米制或英制螺紋的凸緣連接器.第1部分:3.5MPa至35MPa(35巴至350巴)壓力下 | Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127; Technical Corrigendum 1 |
| ISO 6162-1 | 液壓傳動.帶分離式或一體式法蘭夾和米制或英制螺紋的凸緣連接器.第1部分:壓力為3.5MPa至35MPa(35巴至350巴) | Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| ISO 6162-2 | 液壓傳動.帶分離式或一體式法蘭夾和米制或英制螺紋的凸緣連接器.第2部分:壓力為35MPa至40MPa(350巴至400巴) | Hydraulic fluid power - Flange connectors with split or one-piece flange champs and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51 |
| ISO 6164 | 液壓傳動.25MPa和40MPa(250 bar和400 bar)壓力下使用的四螺栓整體方法蘭 | Hydraulic fluid power; four-srew, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| ISO 6263 | 液壓傳動 調速閥 安裝面 | Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces |
| ISO 6264 | 液壓傳動 溢流閥 安裝面 | Hydraulic fluid power - Pressure-relief valves - Mounting surfaces |
| ISO 6403 | 液壓傳動 控制流量及壓力的閥 試驗方法 | Hydraulic fluid power; valves controlling flow and pressure; test methods |
| ISO 6547 | 液壓傳動 缸筒 裝有支撐環的活塞密封溝槽 尺寸和公差 | Hydraulic fluid power; Cylinders; Piston seal housings incorporating bearing rings; Dimensions and tolerances |
| ISO 6597 | 道路車輛.機動車用帶有電子控制功能的液壓制動系統.試驗過程 | Road vehicles - Hydraulic braking systems, including those with electronic control functions, for motor vehicles - Test procedures |
| ISO 6605 | 液壓傳動.軟管及軟管組件.試驗方法 | Hydraulic fluid power - Hoses and hose assemblies - Test methods |
| ISO 6743-4 | 潤滑劑、工業潤滑油和有關產品(L類) 分類 第4部分:H組(液壓系統) | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) |
| ISO 6772 | 航空航天 流體系統 液壓軟管、導管和接頭組件的沖擊試驗 | Aerospace; fluid systems; impulse testing of hydraulic hose, tubing and fitting assemblies |
| ISO 6802 | 鋼絲增強的橡膠和塑料軟管及軟管組件.彎曲液壓脈沖試驗 | Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing |
| ISO 6803 | 橡膠或塑料軟管和軟管組件 無彎曲的液壓脈沖試驗 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing |
| ISO 6805 | 井下采礦用的橡膠軟管和軟管組件 采煤用鋼絲增強液壓型 規范 | Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification |
| ISO 7135 | 土方機械 液壓挖掘機 術語和商業規格 | Earth-moving machinery; hydraulic excavators; terminology and commercial specifications |
| ISO 7169 | 航空航天 液壓系統用24°錐度孔可拆卸管接頭 一般規范 | Aerospace - Separable tube fittings for fluid systems, 24 degrees cone - General specification |
| ISO 7181 | 液壓傳動 缸筒 活塞和活塞桿面積比 | Hydraulic fluid power; cylinders; bore and rod area ratios |
| ISO 7241-1 | 液壓傳動 快換接頭 第1部分:尺寸和要求 | Hydraulic fluid power; Quick-action couplings; Part 1 : Dimensions and requirements |
| ISO 7241-2 | 液壓傳動 快換接頭 第2部分:試驗方法 | Hydraulic fluid power - Quick-action couplings - Part 2: Test methods |
| ISO 7257 | 航空器 液壓管接頭和連接接頭扭轉彎曲試驗 | Aircraft; Hydraulic tubing joints and fittings; Rotary flexure test |
| ISO 7308 | 道路車輛 儲能液壓制動用的石油基制動液 | Road vehicles; Petroleum-based brake-fluid for stored-energy hydraulic brakes |
| ISO 7309 | 道路車輛 液壓制動系統 ISO標準石油基液 | Road vehicles; Hydraulic braking systems; ISO reference petroleum base fluid |
| ISO 7314 | 航空航天.液壓系統.金屬軟管組件 | Aerospace - Fluid systems - Metal hose assemblies |
| ISO 7315 | 航空航天 液壓系統安裝用“P”形卡箍(環狀卡箍) 包容尺寸 | Aerospace; "P" clamps (loop clamps) for fluid systems; envelope dimensions |
| ISO 7368 | 液壓傳動 二油口蓋板式插裝閥 插裝孔 | Hydraulic fluid power; two-port slip-in cartridge valves; cavities |
| ISO 7425-1 | 液壓傳動 彈性體賦能塑料面密封溝槽 尺寸和公差 第1部分:活塞密封溝槽 | Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 1: piston seal housings |
| ISO 7425-2 | 液壓傳動 彈性體賦能塑料面密封溝槽 尺寸和公差 第2部分:活塞桿密封溝槽 | Hydraulic fluid power; housings for elastomer-energized, plastic-faced seals; dimensions and tolerances; part 2: rod seal housings |
| ISO 7451 Technical Corrigendum 1 | 土方機械 液壓挖掘機鏟斗和挖掘裝載機鏟斗的容量標定 技術勘誤1 | Earth-moving machinery - Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets; Technical Corrigendum 1 |
| ISO 7451 | 土方機械 液壓挖掘機鏟斗和挖掘裝載機鏟斗的容量標定 | Earth-moving machinery - Volumetric ratings for hydraulic excavator buckets and backhoe loader buckets |
| ISO 7630 | 道路車輛 使用石油基液壓制動液的鼓式制動輪缸的彈性O(shè)形密封圈(最高工作溫度120℃) | Road vehicles; Elastomeric O-rings for hydraulic drum brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7631 | 道路車輛 使用石油基液壓制動液的液壓制動系統液壓缸的彈性皮碗和密封墊圈(最高工作溫度120℃) | Road vehicles; Elastomeric cups and seals for cylinders for hydraulic braking systems using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7632 | 道路車輛 使用石油基液壓制動液的液壓盤式制動液壓缸的彈性密封墊圈(最高工作溫度120℃) | Road vehicles; Elastomeric seals for hydraulic disc brake cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7633 | 道路車輛 使用石油基液壓制動液的鼓式液壓制動輪缸的彈性保護罩(最高工作溫度120℃) | Road vehicles; Elastomeric boots for drum type hydraulic brake wheel cylinders using a petroleum base hydraulic brake fluid (service temperature 120 degrees C max.) |
| ISO 7635 | 道路車輛.包括有電子控制功能的機動車輛在內的機動車輛用氣壓或氣動/液壓制動系統.試驗規程 | Road vehicles - Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions - Test procedures |
| ISO 7745 | 液壓傳動 難燃液壓油 使用指南 | Hydraulic fluid power; fire-resistant (FR) fluids; guidelines for use |
| ISO 7789 Technical Corrigendum 1 | 液壓傳動 二油口、三油口和四油口螺紋式插裝閥 插裝孔 技術勘誤1 | Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities; Technical Corrigendum 1 |
| ISO 7789 | 液壓傳動 二油口、三油口和四油口螺紋式插裝閥 插裝孔 | Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities |
| ISO 7790 | 液壓傳動 四油口疊加閥和四油口方向控制閥02、03和05規格 夾緊尺寸 | Hydraulic fluid power - Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 - Clamping dimensions |
| ISO 7902-1 | 穩態條件下液壓滑動軸承 圓柱形軸承 第1部分:計算程序 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 1: Calculation procedure |
| ISO 7902-2 | 穩態條件下液壓滑動軸承 圓柱形軸承 第2部分:計算程序用函數 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 2: Functions used in the calculation procedure |
| ISO 7902-3 | 穩態條件下液壓滑動軸承 圓柱形軸承 第3部分:可允許的運行參數值 | Hydrodynamic plain journal bearings under steady-state conditions - Circular cylindrical bearings - Part 3: Permissible operational parameters |
| ISO 7986 | 液壓傳動 密封裝置 評定用于液壓往復運動用途的密封件性能的標準試驗方法 | Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
| ISO 8032 | 橡膠和塑料軟管組件 液壓脈沖彎曲試驗(半Ω 型試驗) | Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) |
| ISO 8131 | 液壓傳動 單桿缸、16 MPa(160 bar)小型系列 公差 | Hydraulic fluid power; single rod cylinders, 16 MPa (160 bar) compact series; tolerances |
| ISO 8132 | 液壓傳動.單桿缸、16 MPa (160 bar)中型系列和25 MPa (250 bar)系列.附件安裝尺寸 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Mounting dimensions for accessories |
| ISO 8133 | 液壓傳動.單桿缸、16 MPa(160 bar)小型系列.附件安裝尺寸 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) compact series - Mounting dimensions for accessories |
| ISO 8135 | 液壓傳動 單桿缸、16 MPa(160 bar)中型系列和25 MPa(250 bar)系列 公差 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series - Tolerances |
| ISO 8278 | 航空航天 液壓式壓力補償變流量泵 一般要求 | Aerospace; Hydraulic, pressure compensated, variable delivery pumps; General requirements |
| ISO 8426 | 液壓傳動 容積式泵和馬達 空載排量的測定 | Hydraulic fluid power; positive displacement pumps and motors; determination of derived capacity |
| ISO 8574 | 航空航天.液壓系統管路安裝.彎管的合格試驗 | Aerospace - Hydraulic system tubing - Qualification tests for bent tubes |
| ISO 8575 | 航空航天 流體系統 液壓系統管路安裝 | Aerospace; fluid systems; hydraulic system tubing |
| ISO 8626 | 液壓伺服振動試驗設備 特性描述方法 | Servo-hydraulic test equipment for generating vibration; method of describing characteristics |
| ISO 8643 | 土方機械 液壓挖掘機和挖掘裝載機動臂下降控制裝置 要求和試驗 | Earth-moving machinery - Hydraulic excavator and backhoe loader boom-lowering control device - Requirements and tests |
| ISO 9080 | 塑料管道和導管系統.用外推法測定熱塑性塑料管材的長期靜液壓強度 | Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| ISO 9110-1 | 液壓傳動 測量技術 第1部分:通用測量準則 | Hydraulic fluid power; measurement techniques; part 1: general measurement principles |
| ISO 9110-2 | 液壓傳動 測量技術 第2部分:密閉回路中平均穩定壓力的測量 | Hydraulic fluid power; measurement techniques; part 2: measurement of average steady-state pressure in a closed conduit |
| ISO 9206 | 航空航天 恒流量液壓馬達 一般規范 | Aerospace; constant displacement hydraulic motors; general specifications |
| ISO 9302 | 壓力用途的無縫鋼管和焊接(埋弧焊除外)鋼管 液壓密封驗證電磁試驗法 | Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes; electromagnetic testing for verification of hydraulic leak-tightness |
| ISO 9461 | 液壓傳動 閥的油口、底板、控制裝置和電磁鐵的標準 | Hydraulic fluid power; identification of valve ports, subplates, control devices and solenoids |
| ISO 9538 | 航空航天 液壓管路安裝接頭及管接頭 平面彎曲試驗 | Aerospace - Hydraulic tubing joints and fittings - Planar flexure test |
| ISO 9615 | 木工機械 帶有液壓夾緊裝置的木絲用立式切碎機 術語 兩種語言版 | Woodworking machines; vertical shredding machines for wood wool production, with hydraulic clamping; nomenclature |
| ISO 9635 | 灌溉設備 液壓操縱灌溉閥 | Irrigation equipment; hydraulically operated irrigation valves |
| ISO 9906 | 回轉動力泵 液壓性能驗收試驗 等級1和2 | Rotodynamic pumps - Hydraulic performance acceptance tests - Grades 1 and 2 |
| ISO 9974-1 | 通用和液壓傳動用聯接件 帶ISO 261彈性螺紋或金屬-金屬密封的氣門和雙頭螺栓端頭 第1部分:螺紋氣門 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports |
| ISO 9974-2 | 通用和液壓傳動用聯接件 帶ISO 261彈性螺紋或金屬-金屬密封的氣門和雙頭螺栓端頭 第2部分:彈性密封的雙頭螺 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 9974-3 | 通用和液壓傳動用聯接件 帶ISO 261彈性螺紋或金屬-金屬密封的氣門和雙頭螺栓端頭 第3部分:金屬-金屬密封的 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) |
| ISO 9974-4 | 通用和液壓傳動用聯接件.帶ISO 261彈性螺紋或金屬-金屬密封的氣門和雙頭螺栓端頭.第4部分:內外六角氣門栓的 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs |
| ISO/OECD 789-10 | 農業拖拉機.試驗程序.第10部分:拖拉機與農具連接界面液壓功率 | Agricultural tractors - Test procedures - Part 10: Hydraulic power at tractor/implement interface |
| ISO/TR 10949 | 液壓傳動.元件清潔度.從生產到安裝的過程中元件清潔度的取得和控制指南 | Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
| ISO/TR 11071-2 | 世界范圍電梯安全標準比較.第2部分:液壓電梯 | Comparison of worldwide lift safety standards - Part 2: Hydraulic lifts (elevators) |
| ISO/TR 11340 | 橡膠和橡膠制品 液壓軟管裝置 液壓系統的外部泄漏分類 | Rubber and rubber products - Hydraulic hose assemblies - External leakage classification for hydraulic systems |
| ISO/TR 16144 | 液壓傳動.液體自動粒子計數器的校準.證實標準參考物質(SRM 2806)的規程 | Hydraulic fluid power - Calibration of liquid automatic particle counters - Procedures used to certify the standard reference material SRM 2806 |
| ISO/TR 8059 | 灌溉設備 自動灌溉系統 液壓控制 | Irrigation equipment; Automatic irrigation systems; Hydraulic control |
| ISO/TR 9080 Technical Corrigendum 1 | 流體輸送用熱塑性塑料管材 用靜液壓破壞應力數據測定熱塑性塑料管材材料長期靜液壓強度的外推方法 技術勘誤 | Thermoplastics pipes for the transport of fluids - Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials - Technical Corrigendum 1 |
| ISO/TS 13725 | 液壓傳動 缸筒 壓曲臨界負荷測定方法 | Hydraulic fluid power - Cylinders - Method for determining the buckling load |
| ISO/TS 16431 | 液壓傳動.配件系統.清潔度的鑒定 | Hydraulic fluid power - Assembled systems - Verification of cleanliness |
| ISO/TS 17104 | 螺紋緊固件的旋轉刀具.液壓推動工具.性能試驗方法 | Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method |
| 編號 | 中文名稱 | 英文名稱 |