微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS A8321 | 土方機械.降低液壓挖土機和反鏟裝載機聲震的控制裝置.要求和試驗 土工機械 ― 油圧ショベル又はバックホウローダのブーム降下制御裝置 ― 性能基準及び試験方法 | Earth-moving machinery -- Hydraulic excavator and backhoe loader boom-lowering control device -- Requirements and tests |
| JIS A8340-4 | 土方機械.安全.第4部分:液壓挖土機的要求 土工機械－安全－第４部：油圧ショベルの要求事項 | Earth-moving machinery -- Safety -- Part 4: Requirements for hydraulic excavators |
| JIS A8403-1 | 運土機械.液壓挖掘機.第1部分:術語和商業要求 土工機械 ― 油圧ショベル ― 第１部：用語及び仕様項目 | Earth-moving machinery -- Hydraulic excavators -- Part 1: Terminology and commercial specifications |
| JIS A8403-2 | 運土機械.液壓挖掘機.第2部分:規范活頁的標準格式 土工機械 ― 油圧ショベル ― 第２部：仕様書様式 | Earth-moving machinery -- Hydraulic excavators -- Part 2: Standard form of specification sheets |
| JIS A8403-3 | 運土機械.液壓挖掘機.第3部分:測試方法 土工機械 ― 油圧ショベル ― 第３部：性能試験方法 | Earth-moving machinery -- Hydraulic excavators -- Part 3: Testing methods |
| JIS A8403-4 | 運土機械.液壓挖掘機.第4部分:鏟斗的額定容積 土工機械 ― 油圧ショベル ― 第４部：バケットの定格容量 | Earth-moving machinery -- Hydraulic excavators -- Part 4: Bucket volumetric ratings |
| JIS A8403-5 | 運土機械.液壓挖掘機.第5部分:機械過加載的測量方法 土工機械 ― 油圧ショベル ― 第５部：掘削力測定方法 | Earth-moving machinery -- Hydraulic excavators -- Part 5: Method of measuring tool forces |
| JIS A8922 | 土方機械.液壓挖土機.操作人員安全保護裝置的實驗室試驗和性能要求 土工機械 ― 油圧ショベル ― 運転員保護ガードの試験及び性能要求事項 | Earth-moving machinery -- Hydraulic excavators -- Laboratory tests and performance requirements for operator protective guards |
| JIS B0142 | 液壓和氣動技術的術語匯編 油圧及び空気圧用語 | Glossary of terms for oil hydraulics and pneumatics |
| JIS B2291 | 21 MPA液壓用平焊管法蘭 | 21 MPa slip-on welding pipe flanges for hydraulic use |
| JIS B2292-1 | 液壓傳動.容積式泵和發動機的安裝盤與軸端的尺寸和識別代碼.第1部分:用米制單位表示的英寸系列 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 1: Inch series shown in metric units |
| JIS B2292-2 | 液壓傳動.容積式泵和發動機的安裝盤與軸端的尺寸和識別代碼.第2部分:米制系列 | Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series |
| JIS B2351-5 | 液力和一般用途金屬管接頭.第5部分.螺紋液壓動力接頭的試驗方法 | Metallic tube connections for fluid power and general use -- Part 5: Test methods for threaded hydraulic fluid power connections |
| JIS B2409 | 液壓流體動力.密封裝置.油壓往復設備的密封件性能評定的標準試驗方法 | Hydraulic fluid power -- Sealing devices -- Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
| JIS B6403 | 液壓機.準確度的測試 | Hydraulic presses -- Testing of the accuracy |
| JIS B8038 | 往復式液壓氣缸用活塞環 | Piston rings for reciprocating hydraulic cylinders |
| JIS B8301 ERRATUM 1 | 旋轉動力泵.液壓性能驗收試驗.1級和2級(勘誤1) | Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2 (Erratum 1) |
| JIS B8301 | 旋轉動力泵.液壓性能驗收試驗.1級和2級 | Rotodynamic pumps -- Hydraulic performance acceptance tests -- Grades 1 and 2 |
| JIS B8306 | 離心油泵.用油作為測試液體的液壓性能驗收試驗 | Centrifugal type oil pumps -- Hydraulic performance acceptance tests by oil as testing liquid |
| JIS B8311 | 往復式泵.液壓性能驗收試驗 | Reciprocating pumps -- Hydraulic performance acceptance tests |
| JIS B8312 | 齒輪泵和螺旋泵.液壓性能驗收試驗 | Gear pumps and screw pumps -- Hydraulic performance acceptance tests |
| JIS B8348 | 液壓流體動力.泵和電動機.試驗方法 | Hydraulic fluid power -- Pumps and motors -- Test methods |
| JIS B8349-2 | 液壓傳動.系統和組件中產生的壓力波動級別的測定.第2部分:泵的簡化法 | Hydraulic fluid power -- Determination of pressure ripple levels generated in systems and components -- Part 2: Simplified method for pumps |
| JIS B8350-1 | 液壓流體動力.氣載噪聲級測定的試驗規程.第1部分:泵 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 1: Pumps |
| JIS B8350-2 | 液壓流體動力.氣載噪聲級測定的試驗規程.第2部分:馬達 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 2: Motors |
| JIS B8350-3 | 液壓流體動力.氣載噪聲級測定的試驗規程.第3部分:泵.采用平行六面體麥克風排列法 | Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array |
| JIS B8351 | 液壓葉片泵 | Vane pumps for hydraulic use |
| JIS B8352 | 液壓齒輪泵 | Gear pumps for hydraulic use |
| JIS B8355 | 液壓流體動力.裝配型四通電磁操縱閥 | Hydraulic fluid power -- Subplate type solenoid operated four-port valves |
| JIS B8356-1 | 液壓動力.過濾器.過濾器性能的評價.第1部分:過濾器元件.功能特性的檢驗程序 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 1: Filter elements -- Procedure for verifying performance characteristics |
| JIS B8356-2 | 液壓動力.過濾器.過濾器性能的評價.第2部分:過濾器元件.制造完整性的檢定和首次起泡點的測定 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 2: Filter elements -- Verification of fabrication integrity and determination of the first bubble point |
| JIS B8356-3 | 液壓動力.過濾器.過濾器性能的評價.第3部分:過濾器元件.耐破壞/耐爆裂性檢定 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 3: Filter elements -- Verification of collapse/burst resistance |
| JIS B8356-4 | 液壓動力.過濾器.過濾器性能的評價.第4部分:過濾器元件.材料與液體相容性的檢定 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 4: Filter elements -- Verification of material compatibility with fluid |
| JIS B8356-5 | 液壓動力.過濾器.過濾器性能的評價.第5部分:過濾器元件.端向負荷試驗方法 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 5: Filter elements -- Method for end load test |
| JIS B8356-6 | 液壓動力.過濾器.過濾器性能的評價.第6部分:過濾器元件.流動疲勞特性的檢定 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 6: Filter elements -- Verification of flow fatigue characteristics |
| JIS B8356-7 | 液壓動力.過濾器.過濾器性能的評價.第7部分:過濾器.壓降與流動特性關系的評價 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 7: Filters -- Evaluation of pressure drop versus flow characteristics |
| JIS B8356-8 | 液壓流體動力過濾器.評定過濾元件過濾性能的多通路試驗方法 | Hydraulic fluid power filters -- Multi-pass method for evaluating filtration performance of a filter element |
| JIS B8356-9 | 液壓動力.過濾器.過濾器性能的評價.第9部分:過濾器.對要求的說明 | Hydraulic fluid power -- Filters -- Evaluation of filter performance -- Part 9: Filters -- Statement of requirements |
| JIS B8357 | 液壓動力.帶壓力補償?shù)牧髁靠刂崎y.安裝面 | Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces |
| JIS B8358 | 液壓傳動.氣囊式蓄能器.試驗方法 | Hydraulic fluid power -- Bladder type accumulators -- Test methods |
| JIS B8360 | 液壓用鋼絲增強的橡膠軟管組件 | Wire reinforced rubber hose assemblies for hydraulic use |
| JIS B8361 | 液壓流體動力.與系統有關的一般規則 | Hydraulic fluid power -- General rules relating to systems |
| JIS B8362 | 液壓用織物增強的熱塑性塑料軟管組件 | Textile reinforced thermoplastic hose assemblies for hydraulic use |
| JIS B8363 | 液壓軟管組件的端部配件及接頭 | End fittings and adapters for hydraulic hose assemblies |
| JIS B8364 | 液壓用織物增強的橡膠軟管組件 | Textile reinforced rubber hose assemblies for hydraulic use |
| JIS B8366-1 | 流體動力系統和元件.液壓缸.元件和識別代碼.第1部分:缸徑和活塞桿直徑.米制系列 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 1: Cylinder bores and piston rod diameters -- Metric series |
| JIS B8366-2 | 流體動力系統和元件.液壓缸.元件和識別碼.第2部分:標稱壓力 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 2: Nominal pressures |
| JIS B8366-3 | 流體動力系統和元件.液壓缸.元件和識別碼.第3部分:活塞沖程的基本系列 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 3: Basic series of piston strokes |
| JIS B8366-4 | 流體動力系統和元件.液壓缸.元件和識別碼.第4部分:活塞桿螺紋尺寸和類型 | Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 4: Piston rod thread dimension and types |
| JIS B8366-5 | 流體動力系統和元件.液壓缸.元件和識別碼.第5部分:識別碼 | Fluid power systems and components -- Cylinders -- Elements and identification code -- Part 5: Identification code |
| JIS B8366-6 | 流體動力系統及元件.液壓缸.元件和識別代碼.第6部分:液壓流體動力.單桿液壓缸、16MPa和25MPa圓形缸蓋、焊接 | Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 6: Hydraulic fluid power -- Single rod cylinders, 16 MPa and 25 MPa round cover, welded or threaded flange type mounting dimensions -- Tolerances |
| JIS B8366-7 | 液壓氣動系統及元件.液壓缸.元件和識別代碼.第7部分:液壓流體動力.單桿液壓缸、16MPa方形缸蓋、系桿固定型 | Fluid power systems and components -- Cylinder -- Elements and identification code -- Part 7: Hydraulic fluid power -- Single rod cylinders, 16 MPa square cover, tie rod tightened type mounting dimensions -- Port dimensions |
| JIS B8367-1 | 液壓氣缸的安裝尺寸.第1部分:單桿.16 MPa系列、焊接或螺紋法蘭的圓蓋型液壓氣缸(氣缸內徑25 mm 至 500 mm) | Mounting dimensions for hydraulic cylinders -- Part 1: Single rod -- 16 MPa series, round cover type with welded or threaded flange (Bores from 25 mm to 500 mm) |
| JIS B8367-2 | 液壓氣缸的安裝尺寸.第2部分:單桿.16 MPa系列、方蓋、系桿密封型液壓氣缸(氣缸內徑25 mm 至 200 mm) | Mounting dimensions for hydraulic cylinders -- Part 2: Single rod -- 16 MPa series, square cover and tie rod tightend type (Bores from 25 mm to 200 mm) |
| JIS B8367-3 | 液壓氣缸的安裝尺寸.第3部分:單桿.16 MPa系列、方蓋、系桿密封型液壓氣缸(氣缸內徑250 mm 至 500 mm) | Mounting dimensions for hydraulic cylinders -- Part 3: Single rod -- 16 MPa series, square cover and tie rod tightend type (Bores from 250 mm to 500 mm) |
| JIS B8367-4 | 液壓氣缸的安裝尺寸.第4部分:單桿.25 MPa系列、焊接或螺紋法蘭的圓蓋型液壓氣缸(氣缸內徑50 mm 至 500 mm) | Mounting dimensions for hydraulic cylinders -- Part 4: Single rod -- 25 MPa series, round cover types with welded or threaded flange (Bores from 50 mm to 500 mm) |
| JIS B8367-5 | 液壓氣缸的安裝尺寸.第5部分:單桿.10 MPa系列、方蓋、系桿密封型液壓氣缸(汽缸內徑40 mm 至 200 mm) | Mounting dimensions for hydraulic cylinders -- Part 5: Single rod -- 10 MPa series, square cover and tie rod tightend type (Bores from 40 mm to 200 mm) |
| JIS B8367-6 | 液壓氣缸的安裝尺寸.第6部分:單桿.10 MPa系列、空間窄小型液壓氣缸(汽缸內徑32 mm 至 100 mm) | Mounting dimensions for hydraulic cylinders -- Part 6: Single rod -- 10 MPa series space saving type (Bores from 32 mm to 100 mm) |
| JIS B8368-1 | 氣壓缸的安裝尺寸.第1部分:單桿.帶固定安裝裝置的1 MPa系列、方蓋、系桿密封型液壓氣缸(汽缸內徑32 mm 至 2 | Mounting dimensions for pneumatic cylinders -- Part 1: Single rod -- 1 MPa series, square cover and tie rod tightend type with fixed mounting devices (Bores from 32 mm to 250 mm) |
| JIS B8368-2 | 氣壓缸的安裝尺寸.第2部分:單桿.帶可分離安裝裝置的1 MPa系列、方蓋、系桿密封型液壓氣缸(汽缸內徑32 mm 至 | Mounting dimensions for pneumatic cylinders -- Part 2: Single rod -- 1 MPa series, square cover and tie rod tightend type with detachable mounting devices (Bores from 32 mm to 320 mm) |
| JIS B8368-3 | 氣壓缸的安裝尺寸.第3部分:單桿.帶固定和可分離安裝裝置型的1 MPa系列、小缸徑液壓氣缸( 汽缸內徑8 mm 至 2 | Mounting dimensions for pneumatic cylinders -- Part 3: Single rod -- 1 MPa series, small bore with fixed and detachable mounting device type (Bores from 8 mm to 25 mm) |
| JIS B8368-4 | 氣壓缸的安裝尺寸.第4部分:單桿.1 MPa系列、節省空間型液壓氣缸(汽缸內徑20 mm 至 100 mm) | Mounting dimensions for pneumatic cylinders -- Part 4: Single rod -- 1 MPa series, space saving cylinders (Bores from 20 mm to 100 mm) |
| JIS B8372-1 | 液壓流體動力.壓縮空氣壓力調節器和過濾調節器.第1部分:廠商資料和產品生產要求應包含的主要特性 | Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 1: Main characteristics to be included in literature from suppliers and product-making requirements |
| JIS B8375-1 | 氣動液壓動力.五閥口方向控制閥.第1部分:無電氣連器的安裝界面 | Pneumatic fluid power -- Five-port directional control valves -- Part 1: Mounting interface surface without electrical connector |
| JIS B8375-2 | 氣動液壓動力.五閥口方向控制閥.第2部分:帶任選電氣連接器的安裝界面 | Pneumatic fluid power -- Five-port directional control valves -- Part 2: Mounting interface surface with optional electrical connector |
| JIS B8375-3 | 氣動液壓動力.五閥口方向控制閥.第3部分:閥功能傳送代碼系統 | Pneumatic fluid power -- Five-port directional control valves -- Part 3: Code system for communication of valve functions |
| JIS B8377-1 | 液壓動力系統和部件.氣缸的檢驗和試驗.第1部分:氣壓缸的驗收試驗 | Fluid power systems and components -- Inspection and test of cylinders -- Part 1: Acceptance tests for pneumatic cylinders |
| JIS B8377-2 | 流體動力系統和部件.氣缸的檢驗和試驗.第2部分:液壓氣缸的驗收試驗 | Fluid power systems and components -- Inspection and test of cylinders -- Part 2: Acceptance tests for hydraulic cylinders |
| JIS B8382 | 液壓流體動力.無源活塞置換泵和馬達.推導容量的測定 | Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity |
| JIS B8383 | 液壓流體動力.泵和馬達.幾何位移量 | Hydraulic fluid power -- Pumps and motors -- Geometric displacements |
| JIS B8384 | 液壓動力.正排量泵、電機和整體傳動裝置.穩態性能的測定 | Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance |
| JIS B8385 | 液壓動力.泵、電機和整體傳動裝置.參數定義和字母符號 | Hydraulic fluid power -- Pumps, motors and integral transmissions -- Parameter definitions and letter symbols |
| JIS B8386 | 液壓流體動力.閥門.壓差/流體特性的測定 | Hydraulic fluid power -- Valves -- Determination of pressure differential/flow characteristics |
| JIS B8387 | 液壓流體動力.四孔模塊通氣閥和四孔方向控制閥.02,03,05尺寸.夾持尺寸 | Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03 and 05 -- Clamping dimensions |
| JIS B8388 | 液壓動力系統和元件.帶接地的三針電插頭連接器.特性和要求 | Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements |
| JIS B8389 | 液壓動力系統和元件.帶接地的兩針電插頭連接器.特性和要求 | Fluid power systems and components -- Two-pin electrical plug connectors with earth contact -- Characteristics and requirements |
| JIS B8390 | 氣動液壓動力.用可壓縮流體的元件.流動速率特性的測定 | Pneumatic fluid power -- Components using compressible fluids -- Determination of flow-rate characteristics |
| JIS B8394-1 | 液壓動力.彈性體增能用、塑料面密封液壓缸.尺寸和公差.第1部分:活塞密封液壓缸 | Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 1: Piston seal housings |
| JIS B8394-2 | 液壓動力.彈性體增能用、塑料面密封液壓缸.尺寸和公差.第2部分:桿密封液壓缸 | Hydraulic fluid power -- Housings for elastomer-energized, plastic-faced seals -- Dimensions and tolerances -- Part 2: Rod seal housings |
| JIS B8397-1 | 液壓流體動力.電動機特性的測定.第1部分:在恒定低速和恒壓下進行的測定 | Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and at constant pressure |
| JIS B8397-2 | 液壓流體動力.電動機特性的測定.第2部分:可起動性 | Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability |
| JIS B8397 | 液壓流體動力.帶分離器的氣-液蓄壓器.壓力和容積的范圍及特征數量 | Hydraulic fluid power -- Gas-loaded accumulators with separator -- Ranges of pressures and volumes and characteristic quantities |
| JIS B8397-3 | 液壓流體動力.電動機特性的測定.第3部分:在恒定流量和恒定扭矩下進行的測定 | Hydraulic fluid power -- Determination of characteristics of motors -- Part 3: At constant flow and at constant torque |
| JIS B8398 | 液壓流體動力.氣-液蓄壓器.氣體口的尺寸 | Hydraulic fluid power -- Gas-loaded accumulators -- Dimensions of gas ports |
| JIS B8399 | 液壓流體動力.帶分離器的氣－液蓄壓器.優選液壓端口的選擇 | Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports |
| JIS B8404-1 | 液壓傳動.氣缸.16MPa中型和25MPa系列氣缸.附件安裝尺寸.第1部分:桿端普通眼 | Hydraulic fluid power -- Cylinders -- 16MPa medium and 25MPa series -- Accessory mounting dimensions -- Part 1: Rod end plain eyes |
| JIS B8404-2 | 液壓傳動.氣缸.16MPa中型和25MPa系列氣缸.附件安裝尺寸.第2部分:桿端球形眼 | Hydraulic fluid power -- Cylinders -- 16 MPa medium and 25 MPa series -- Accessory mounting dimensions -- Part 2: Rod end spherical eyes |
| JIS B8404-3 | 液壓傳動.氣缸.16MPa中型和25MPa系列氣缸.附件安裝尺寸.第3部分:桿端和支架 | Hydraulic fluid power -- Cylinders -- 16MPa medium and 25MPa series -- Accessory mounting dimensions -- Part 3: Rod end and bracket |
| JIS B8404-4 | 液壓傳動.氣缸.帶32 mm至200 mm氣缸孔的16MPa小型系列.附件安裝尺寸.第4部分:桿端和支架 | Hydraulic fluid power -- Cylinders -- 16 MPa compact series with bores from 32 mm to 200 mm -- Accessory mounting dimensions -- Part 4: Rod end and bracket |
| JIS B8404-5 | 液壓傳動.氣缸.帶32 mm至200 mm的氣缸孔的16MPa小型系列.附件安裝尺寸.第5部分:桿端 | Hydraulic fluid power -- Cylinders -- 16MPa compact series with bores from 250 mm to 500 mm --Accessory mounting dimensions -- Part 5: Rod end |
| JIS B8651 | 比例電動液壓減壓閥試驗方法 | Test methods for electro-hydraulic proportional pressure relief valves |
| JIS B8652 | 電動液壓比例安全閥和減壓閥的試驗方法 | Test methods for electro-hydraulic proportional pressure relief valves and electro-hydraulic proportional pressure reducing and relieving valves |
| JIS B8653 | 電動液壓比例節流閥試驗方法 | Test methods for electro-hydraulic proportional metering valves |
| JIS B8654 | 電動液壓比例串聯型流量控制閥試驗方法 | Test methods for electro-hydraulic proportional series flow control valves |
| JIS B8655 | 電動液壓比例串聯型定向流量控制閥試驗方法 | Test methods for electro-hydraulic proportional directional series flow control valves |
| JIS B8656 | 電動液壓比例旁通流量控制閥試驗方法 | Test methods for electro-hydraulic proportional bypass flow control valves |
| JIS B8657 | 電動液壓比例定向旁通流量控制閥試驗方法 | Test methods for electro-hydraulic proportional directional bypass flow control valves |
| JIS B8659-1 | 液壓流體動力.電氣調節液壓控制閥門.第1部分:四路直流控制閥門的試驗方法 | Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 1: Test methods for four-way directional flow control valves |
| JIS B8659-2 | 液壓流體動力.電氣調節液壓控制閥門.第2部分:三路定向流量控制閥門的試驗方法 | Hydraulic fluid power -- Electrically modulated hydraulic control valves -- Part 2: Test methods for three-way directional flow control valves |
| JIS B8660 | 液壓動力.流量和壓力控制閥.試驗方法 | Hydraulic fluid power -- Valves controlling flow and pressure -- Test methods |
| JIS B8661 | 液壓流體動力.電控油壓泵試驗方法 | Hydraulic fluid power -- Test method for electrically controlled oil hydraulic pumps |
| JIS B8663 | 液壓流體動力.液壓缸.活塞和桿用方斷面軸承圈的蓋尺寸 | Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods |
| JIS B8664 | 液壓流體動力.壓力控制閥(不包括減壓閥)、順序活門、釋荷閥、節流閥和止回閥. 安裝表面 | Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces |
| JIS B8665 | 液壓流體動力.閥門安裝表面和插裝式閥腔的識別代碼 | Hydraulic fluid power -- Code for identification of valve mounting surfaces and cartridge valve cavities |
| JIS B8666 | 液壓流體動力.減壓閥.安裝表面 | Hydraulic fluid power -- Pressure-relief valves -- Mounting surfaces |
| JIS B8667 | 液壓傳動.壓力開關.安裝表面 | Hydraulic fluid power -- Pressure switches -- Mounting surfaces |
| JIS B9930 | 液壓流體動力.流體污染.用顯微鏡計數方法測定顆粒污染度 | Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using a microscope |
| JIS B9932 | 液壓流體動力.流體自動顆粒計數器的校準 | Hydraulic fluid power -- Calibration of automatic particle counters for liquids |
| JIS B9933 | 液壓流體動力.流體.限定固體顆粒污染水平的編碼 | Hydraulic fluid power -- Fluids -- Code for defining the level of contamination by solid particles |
| JIS B9934 | 液壓流體動力.使用消光原理自動計數測定顆粒污染 | Hydraulic fluid power -- Determination of particulate contamination by automatic counting using the light extinction principle |
| JIS B9935 | 液壓流體動力.液體的在線自動粒子計數系統.校正和驗證方法 | Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation |
| JIS B9936 | 液壓流體動力.粒子污染分析.從工作系統的作業線上提取流體樣品 | Hydraulic fluid power -- Particulate contamination analysis -- Extraction of fluid samples from lines of an operating system |
| JIS B9937 | 液壓流體動力.液體樣品容器.合格鑒定和控制、清潔方法 | Hydraulic fluid power -- Fluid sample containers -- Qualifying and controlling cleaning methods |
| JIS B9938 | 液壓流體動力.耐火流體.使用導則 油圧 ― 難燃性作動油 ― 使用指針 | Hydraulic fluid power -- Fire-resistant (FR) fluids -- Guidelines for use |
| JIS B9939-1 | 液壓流體動力.測量技術.第1部分:一般測量原則 油圧 ― 測定技術 ― 第１部：一般測定原則 | Hydraulic fluid power -- Measurement techniques -- Part 1: General measurement principles |
| JIS B9939-2 | 液壓流體動力.測量技術.第2部分:封閉管道中平均穩態壓力的測量 油圧 ― 測定技術 ― 第２部：管路における平均定常圧力の測定 | Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit |
| JIS D2601 | 汽車零件.使用非石油基制動流體的液壓制動系統的制動軟管組件 自動車部品―非鉱油系液圧ブレーキホースアセンブリ | Automotive parts -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| JIS D2603 | 汽車部件.使用非石油基液壓制動液的液壓制動系統用液壓制動主缸 自動車部品－非鉱油系液圧ブレーキマスタシリンダ | Automotive parts -- Hydraulic brake master cylinders for hydraulic brake systems using a non-petroleum base hydraulic brake fluid |
| JIS D2604 | 汽車零部件.使用非石油基制動流體的液壓制動系統的液壓車輪制動缸 自動車部品 ― 非鉱油系液圧ブレーキホイールシリンダ | Automotive parts -- Hydraulic brake wheel cylinders for hydraulic brake systems using a non-petroleum base brake fluid |
| JIS D2605 | 汽車部件.使用非石油基液壓制動液的液壓制動缸用橡膠皮碗 自動車部品－非鉱油系液圧ブレーキシリンダのゴムカップ | Automotive parts -- Rubber cups for hydraulic braking cylinders using a non-petroleum base hydraulic brake fluid |
| JIS D2608 | 汽車零件.使用非石油基液壓制動流體的液壓制動輪缸的橡膠套管 | Automotive parts -- Rubber boots for hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid |
| JIS D2609 | 道路車輛.使用非石油基液壓制動液的液壓盤式制動缸的彈性密封件 | Road vehicles -- Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid |
| JIS D2610 | 汽車部件.使用非石油基液壓制動液體的液壓制動主油缸儲油箱用膜片襯墊 | Automotive parts -- Diaphragm gaskets for hydraulic brake master cylinder reservoirs using a non-petroleum base hydraulic brake fluid |
| JIS D2611 | 汽車部件.使用非石油基液壓制動油的液壓盤式制動器油缸的彈性防塵罩 | Automotive parts -- Elastomeric boots of hydraulic disc brakes cylinders using a non-petroleum base hydraulic brake fluid |
| JIS D2612 | 汽車部件.使用非石油基液壓制動液的液壓制動主油缸用儲油箱密封件 | Automotive parts -- Reservoir seals for hydraulic brake master cylinders using a non-petroleum base hydraulic brake fluid |
| JIS D8101 AMD 1 | 汽車用便攜式液壓千斤頂（修改件1） | Portable hydraulic jacks for automobiles (Amendment 1) |
| JIS D8101 | 汽車用便攜式液壓千斤頂 | Portable hydraulic jacks for automobiles |
| JIS D8102 | 汽車用液壓千斤頂 | Hydraulic garage jacks for automobiles |
| JIS F1024 | 小船.液壓操縱方向系統 | Small craft -- Hydraulic steering systems |
| JIS F6720 | 船液壓舵機的工廠試驗方法 | Shop test method for ships' hydraulic steering gears |
| JIS F6721 | 船用液壓舵機液壓泵的工廠試驗方法 | Shop test method for oil pressure pumps at hydraulic steering gears for ships |
| JIS F8079 | 船用電氣設施.第204部分:系統設計.電動及電動液壓轉向機構 | Electrical installations in ships Part 204 System design -- Electric and electrohydraulic steering gear |
| JIS K6330-8 | 橡膠和塑料軟管的測試方法.第8部分:無撓曲的液壓脈沖試驗 | Testing methods for rubber and plastics hoses -- Part 8: Hydraulic-pressure impulse test without flexing |
| JIS K6349-1 | 液壓用鋼絲增強橡膠軟管.第1部分:橡膠軟管和軟管組件.線增強液壓型.規范 | Wire reinforced rubber hoses for hydraulic -- Part 1: Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification |
| JIS K6349-2 | 液壓用鋼絲增強橡膠軟管.第2部分:橡膠軟管和軟管組件.橡膠包覆的螺旋線增強液壓型.規范 | Wire reinforced rubber hoses for hydraulic -- Part 2: Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type -- Specification |
| JIS K6349-3 ERRATUM 1 | 液壓系統用鋼絲增強橡膠軟管.第3部分:鋼絲增強橡膠軟管(勘誤 1) | Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses (Erratum 1) |
| JIS K6349-3 | 液壓用鋼絲增強橡膠軟管.第3部分:線增強橡膠軟管 | Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses |
| JIS K6375 | 塑料軟管和軟管組件.液壓型織物增強的熱塑性塑料.規范 | Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification |
| JIS K6379 | 塑料軟管和軟管組件.織物增強的液壓型.規范 | Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification |
| JIS W0105 | 飛機液壓和氣壓系統術語匯編 | Glossary of terms for aircraft hydraulic and pneumatic systems |
| JIS W1842 | 航空航天.恒定置換液壓馬達.一般規范 | Aerospace -- Constant displacement hydraulic motors -- General specifications |
| JIS W2909 | 飛機液壓系統及應急氣動系統的試驗 | Test for aircraft hydraulic and emergency pneumatic systems |
| JIS W2913 | 飛機液壓系統元件的通用規范 | Hydraulic system components, aircraft, general specification for |
| JIS W2921 | 航空航天.液壓系統和部件.壓力和溫度分類 | Aerospace -- Fluid systems and components -- Pressure and temperature classifications |
| JIS W2922 | 飛行器.液壓元件.認可元件用指示流體的標記 | Aircraft -- Hydraulic components -- Marking to indicate fluid for which component is approved |
| JIS W2923 | 航空航天.流體系統和部件.液壓流體的固體顆粒污染物的系統取樣和測量方法 | Aerospace -- Fluid systems and components -- Methods for system sampling and measuring the solid particle contamination of hydraulic fluids |
| JIS W2924 | 航空航天.液壓流體的清潔度分類 | Aerospace -- Cleanliness classification for hydraulic fluids |
| JIS W2925 | 航空航天.液壓系統流體污染.取樣點的位置和取樣的準則 | Aerospace -- Hydraulic system fluid contamination -- Location of sampling points and criteria for sampling |
| 編號 | 中文名稱 | 英文名稱 |