微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI/ASME B16.1 | 25、125、250和800級鑄鐵管法蘭和法蘭配件 | Cast Iron Pipe Flanges and Flanged Fittings, Class 25, 125, 250, and 800 |
| ANSI/ASME B16.42 | 球墨鑄鐵管法蘭和法蘭配件 | Ductile Iron Pipe Flanges and Flanged Fittings |
| ANSI/ASME B16.45 | Soventr排水系統用鑄鐵管件 | Cast Iron Fittings for Soventr Drainage Systems |
| ANSI/ASTM A182/A 182M | 高溫設備用鍛制或軋制合金鋼管法蘭、鍛制管件、閥門及零件規范 | Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ANSI/ASTM D1599 | 塑料管材、管道和管件短時液壓故障壓力試驗方法 | Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings |
| ANSI/ASTM D2152 | 丙銅浸入擠壓聚氯乙烯管材和模鑄管件熔解充分性試驗方法 | Test Method for Adequacy of Fusion of Extruded Poly (Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion |
| ANSI/ASTM D2444 | 熱塑管材和管件耐沖擊性落錘試驗方法 | Test Method for Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) |
| ANSI/ASTM D2468 | 丙烯腈-丁二烯-苯乙烯共聚物塑料管材和管件規范,表 40 | Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 |
| ANSI/ASTM D2671 | 電氣用熱縮管件試驗方法(10.02) | Test Methods for Heat-Shrinkable Tubing for Electrical Use (10.02) |
| ANSI/ASTM D2855 | 聚氯乙烯 (PVC)管材和管件溶劑接合連接件制作慣例 | Practice for Making Solvent-Cemented Joints with Poly (Vinyl Chloride) (PVC) Pipe and Fittings |
| ANSI/ASTM D2902 | 含氟聚合物樹脂熱縮管件規范(10.02) | Specification for Fluoropolymer Resin Heat-shrinkable Tubing for Electrical Insulation |
| ANSI/ASTM D2992 | 玻璃纖維(玻璃纖維增強熱固樹脂)管件和配件獲得靜水壓或壓力設計基礎的實施規程(08.04) | Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings (08.04) |
| ANSI/ASTM D2996 | 繞組線玻璃纖維(玻璃纖維增強熱固樹脂)管件和配件規范(08.04) | Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe (08.04) |
| ANSI/ASTM D3144 | 電絕緣用聚1,1-二氟乙烯熱縮管件規范(10.02) | Specification for Crosslinked Poly(Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation |
| ANSI/ASTM D3261 | 聚乙烯塑料管材和管道用對接熱融合聚乙烯塑料管件規范 | Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| ANSI/ASTM D5677 | 用于航空噴氣機渦輪燃料的玻璃纖維(玻璃纖維加固熱硬化樹脂)管與管件規范.粘合劑粘接接頭型 | Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines |
| ANSI/ASTM F1336 | 帶密封墊的聚氯乙烯(PVC)下水道管件規范 | Specification for Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
| ANSI/ASTM F1866 | 管壁厚度40的聚氯乙烯(PVC)塑料排水管和DWV裝配管件的規范 | Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings |
| ANSI/ASTM F1961 | 交聯聚乙烯(PEX)管用帶盤簧的金屬機械冷壓擴口式管件規范 | Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing |
| ANSI/AWWA C105/A 21.5 | 球墨鑄鐵管路系統用聚乙烯包裝物 | Polyethylene Encasement for Ductile-Iron Pipe Systems |
| ANSI/AWWA C115/A 21.15 | 帶球墨鑄鐵或灰口鑄鐵螺紋法蘭的法蘭球墨鑄鐵管 | Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron Threaded Flanges |
| ANSI/AWWA C150/A 21.50 | 球墨鑄鐵管的厚度設計 | Thickness Design of Ductile-Iron Pipe |
| ANSI/SAE J1131 | 汽車空氣制動系統中使用的SAE J844d非金屬管件和連接組件的性能要求 | Tubing and Fitting Assemblies Used in Automotive Air Brake Systems, Performance Requirements for SAE J844d Nonmetallic |
| ANSI/SAE J246 | 球面及法蘭式(壓縮)套管管件 | Spherical and Flanged Sleeve (Compression) Tube Fittings |
| ANSI/SAE J514 | 液壓管件 | Hydraulic Tube Fittings |
| ANSI/SAE J530 | 汽車管件接頭 | Automotive Pipe Fittings |
| ANSI/UL 109 | 易燃和可燃液體、制冷輔助設備和船上用管件的安全標準 | Standard for Safety for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use |
| ANSI/UL 1684 | 增強熱固樹脂管件和配件 | Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
| ANSI/UL 797 | 電氣金屬管件 | Electrical Metallic Tubing |
| ASME A112.19.1M Supplement 2-2 | 搪瓷鑄鐵管道固定件.補充件2 | (Enameled cast iron plumbing fixtures - Supplement 2) |
| ASME A112.19.1M | 搪瓷鑄鐵管道固定件 | (Enameled cast iron plumbing fixtures) |
| ASME B16.1 | 鑄鐵管法蘭及法蘭配件.等級25、125和250 | (Cast iron pipe flanges and flanged fittings - Classes 25, 125, and 250) |
| ASME B16.12 | 鑄鐵螺紋排水管件 | (Cast iron threaded drainage fittings) |
| ASME B16.15 | 鑄青銅螺紋管件 | (Cast bronze threaded fittings) |
| ASME B16.18 | 鑄銅合金軟釬焊連接壓力管件 | (Cast copper alloy solder joint pressure fittings) |
| ASME B16.23 | DWV類鑄銅合金釬焊連接排水管件 | (Cast copper alloy solder joint drainage fittings: DWV) |
| ASME B16.42 | 球墨鑄鐵管法蘭及法蘭配件.等級150和300 | (Ductile iron pipe flanges and flanged fittings - Classes 150 and 300) |
| ASME B16.5 | 管法蘭和法蘭管件.NPS 1/2 - NPS 24 | (Pipe flanges and flanged fittings - NPS 1/2 through NPS 24) |
| ASME B16.5a Addenda | 管法蘭和法蘭管件.NPS 1/2至NPS 24.附錄 | (Pipe flanges and flanged fittings - NPS 1/2 through NPS 24; Addenda) |
| ASTM A 182/A 182Ma | 高溫設備用鍛制或軋制合金鋼管法蘭、鍛制管件、閥門及零件的標準規范 | Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 338 | 鐵路,船舶和其他重型裝備在溫度達到650華氏度(345攝氏度)時使用的可鍛鑄鐵法蘭,管件和閥門零件 | Malleable Iron Flanges, Pipe Fittings and Valve Parts for Railroad, Marine and Other Heavy Duty Service at Temperatures up to 650 Degrees F (345 Degrees C) |
| ASTM A 674 | 水或其他液體用球墨鑄鐵管的聚乙烯包裝物的標準實施規程 | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids |
| ASTM B 903 | 內部增強的無縫銅熱交換器管件的標準規范 | Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement |
| ASTM C 450 | 公稱尺寸的管件、容器隔熱層用絕熱配件覆蓋物生產的標準實施規范 | Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging |
| ASTM C 668 | 石棉水泥傳輸管件標準規范 | Standard Specification for Asbestos-Cement Transmission Pipe |
| ASTM D 2661 | 丙烯腈-丁二烯-苯乙烯共聚物(ABS)塑料排水管、污水管和通氣管及其管件.附表40 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings |
| ASTM D 2665a | 聚氯乙烯(PVC)塑料排水管、排污管和通風管及管件的標準規范 | Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings |
| ASTM F 1336 | 襯墊聚氯乙烯(PVC)物的下水道管件的標準規范 | Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
| ASTM F 1961a | 交聯聚乙烯(PEX)管用帶盤簧的金屬機械冷擴口加壓管件的標準規范 | Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing |
| ASTM F 2080 | 交聯聚乙烯(PEX)管用帶金屬壓縮套的冷膨脹管件的標準規范 | Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe |
| ASTM F 2159 | SDR9交聯聚乙烯(PEX)管用利用銅擠壓環的塑料插入管件的標準規范 | Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing |
| ASTM F 876 | 交聯聚乙烯(PEX)管件的標準規范 | Standard Specification for Crosslinked Polyethylene (PEX) Tubing |
| UL 1821 | 消防設備用熱塑性塑料噴水器的管及其管件 | (Thermoplastic sprinkler - Pipe and fittings for fire protection service) |
| 編號 | 中文名稱 | 英文名稱 |