微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| CR 13825 | 镥聯接器 CEN論壇“镥管件”任務組向CEN主席的報告 | Luer connectors - A report to CEN chef from the CEN forum task group "Luer fittings" |
| CR 13932 | 旋轉動力泵 管道系統的進口和出口管件建議書 | Rotodynamic pumps - Recommendations for fitting of inlet and outlet on piping |
| EN 10224 | 輸送液體（包括人類生活用水）用的非合金鋼管和管件 交貨技術條件 | Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions |
| EN 12061 | 塑料管道系統 熱塑性管件 耐沖擊試驗方法 | Plastics piping systems - Thermoplastics fittings - Test method for impact resistance |
| EN 12107 | 塑料管道系統 壓注熱塑管件、閥門和輔助設備 管道組件壓注用熱塑 材料的長期液壓強度的測定 | Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
| EN 12117 | 塑料管道系統 熱塑管件、閥門和配件 氣流速率/壓降之間關系的測定 | Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
| EN 1254-1 | 銅和銅合金 管件 第1部分：低溫焊接或纖焊接到銅管上的毛細管用端頭管件 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2 | 銅和銅合金 管件 第2部分：銅管用壓接端頭管件 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| EN 1254-3 | 銅和銅合金 管件 第3部分：塑料管用壓接端頭管件 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1254-4-1998+AC | 銅和銅合金 管件 第4部分：帶有與毛細管端接或壓接端頭的管件 | Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends |
| EN 1254-5 | 銅和銅合金 管件 第5部分：纖焊到銅管的毛細管用短端頭管件 | Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes |
| EN 1329-1 | 建筑物結構內污物和廢水排放(低和高溫)用塑料管道系統 硬塑聚氯乙烯(PVC-U) 第1部分：管材、管件和系統規 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN 1451-1 | 建筑物結構內污物和廢水排出(低和高溫)用塑料管道系統 聚丙烯(PP ) 第1部分：管材、管件和系統規范 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
| EN 1452-3 | 供水塑料管道系統 硬聚氯乙烯(PVC-U) 第3部分：管件 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings |
| EN 1455-1 | 建筑物結構內污物和廢水排放(低和高溫)用塑料管道系統 丙烯腈 丁二烯 苯乙烯共聚物 第1部分：管材、管 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system |
| EN 1505 | 建筑物通風 矩形截面的金屬片通風管道和管件 尺寸 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions |
| EN 1506 | 建筑物通風 環形截面的金屬片通風管道和管件 尺寸 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| EN 1519-1 | 建筑物結構內污物和廢水排放(低和高溫)用塑料管道系統 聚乙烯(PE) 第1部分：管材、管件和系統規范 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system |
| EN 1555-3 | 供給氣體燃料用塑料管道系統 聚已烯(PE) 第3部分：管件 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| EN 1565-1 | 建筑物結構內污物和廢水排放(低和高溫)用塑料管道系統 苯乙烯共聚混合物(SAN+PVC) 第1部分：管材、管件和 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 1: Specifications for pipes, fittings and the system |
| EN 1566-1 | 建筑物結構內污物和廢水排放(低和高溫)用塑料管道系統 氯化聚偏氯乙烯(PVC-C) 第1部分：管材、管件和系統 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system |
| EN 1636-3 | 無壓力排水和污水用塑料管道系統 不飽和聚脂樹脂(UP) 基玻璃纖維增強熱固性塑料(GRP) 第3部分：管件 | Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings |
| EN 1759-3 | 法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第2部分：銅合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 3: Copper alloy flanges |
| EN 1759-4 | 法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第4部分：鋁合金法蘭 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN 1852-1-1997+A1 | 無壓地下排水和污水用塑料管道系統 聚丙烯(PP)、 第一部分：管材、管件及系統規范 | Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system |
| EN 1905 | 塑料管道系統 硬聚氯乙烯管、管件和材料 基于氯的總含量評估聚氯乙烯含量的方法 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
| EN 1916 | 無鋼筋和有鋼筋的混凝土管材及管件 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced |
| EN 26802 | 鋼絲增強的橡膠和塑料軟管及軟管件 彎抗沖擊試驗 | Rubber and plastics hoses and hose assemblies, wire reinforced- Hydraulic impulse test with flexing (ISO 6802:1991) |
| EN 545 | 給水管道用球墨鑄鐵管、配件、附件及其接頭 要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 598 | 污水工程用球墨鑄鐵管、配件、附件和其它接頭 要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for sewerage application - Requirements and test methods |
| EN 877 | 建筑物排水用鑄鐵管和配件及其接頭和附件 要求、試驗方法和質量保證 | Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance |
| EN 969-1995+A1 | 煤氣管道用球墨鑄鐵管、配件、附件及其接頭 要求和試驗方法 | Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods |
| EN ISO 12162 | 壓力用熱塑性塑料管材和管件分級和命名 總體使用(設計)系數 | Thermoplastics materials for pipes and fittings for pressure applications - Classification and designation - Overall service (design) coefficient (ISO 12162:1995) |
| EN ISO 1746 | 橡膠或塑料軟管和管件 彎曲試驗 | Rubber or plastics hoses and tubing - Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) |
| EN ISO 6708 | 管件 公稱尺寸的定義和選擇 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN ISO 8308 | 橡膠和塑料軟管和管件 液體透過管壁性能測定 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:1993) |
| prEN 14280 | 地下電纜管道的塑料管線系統 未增塑聚氯乙烯 塑料管、管件及管線規范 | Plastics piping systems for buried cable ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| prEN 14281 | 地下電纜管道的塑料管線系統 聚乙烯 塑料管、管件及管線規范 | Plastics piping systems for buried cable ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system |
| prEN 14282 | 地下電纜管道的塑料管線系統 聚丙烯 塑料管、管件及管線規范 | Plastics piping systems for buried cable ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| prEN 14283 | 一般用途地下管道的塑料管線系統 未增塑聚氯乙烯 塑料管、管件及管線規范 | Plastics piping systems for general purpose buried ducting - Unplasticized poly(vinyl chloride) (PVC-U) - Specifications for pipes, fittings and the system |
| prEN 14284 | 一般用途地下管道的塑料管線系統 聚乙烯 塑料管、管件及管線規范 | Plastics piping systems for general purpose buried ducting - Polyethylene (PE) - Specifications for pipes, fittings and the system |
| prEN 14285 | 一般用途地下管道的塑料管線系統 聚丙烯 塑料管、管件及管線規范 | Plastics piping systems for general purpose buried ducting - Polypropylene (PP) - Specifications for pipes, fittings and the system |
| prEN 14364 | 有或無壓排水和排污塑料管線系統 玻璃纖維增強的未飽和的聚酯樹脂基熱固塑料管 塑料管管件及接頭規范 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| prEN 1451-3 | 建筑物結構內用于污物和污水排放（高/低溫）的塑料管道系統 聚丙烯（PP） 第3部分：管件 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 3: Fittings |
| prEN 1453-5 | 建筑物內污物和廢水排放(低和高溫)帶結構壁管道的塑料管道系統 硬聚氯乙烯(PVC-U) 第5部分：系統用管件 | Plastics piping systems with structured wall pipes for soil and waste discharge (low and high temperature) within the building structure; unplasticized poly(vinyl chloride) (PVC-U); part 5: fittings for purpose of the system |
| prEN 1455-3 | 建筑物結構內用于污物和污水排放（高/低溫）的塑料管道系統 丙烯晴 丁二烯 苯已烯共聚物(ABS) 第3部分 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 3: Fittings |
| prEN 1456-3 | 地上和地下污廢水壓力排放用塑料管道系統 硬已烯(聚氯已烯)(PVC-U) .第3部分：管件 | Plastics piping systems for underground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings |
| prEN 1519-3 | 建筑物結構內污物和污水排放(低和高溫)塑料管道系統 聚已烯(PE) 第3部分：管件 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 3: Fittings |
| prEN 1565-3 | 建筑物結構內污物和廢水排放(低和高溫)用塑料管道系統 苯乙烯共聚混合物(SAN+PVC) 第3部分：管件 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Styrene copolymer blends (SAN+PVC) - Part 3: Fittings |
| prEN 1566-3 | 建筑物結構內污物和廢水排放(低和高溫)用塑料管道系統 氯化聚偏氯乙烯(PVC-C) 第3部分：管件 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings |
| prEN 1759-1 | 法蘭及其接頭 管材、閥門、管件及附件用已命名種類的圓形法蘭 第1部分：鋼法蘭NPS1/2到24 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| prEN 1796-3 | 有或無壓力供水用塑料管道系統聚合物樹脂（UP）基玻璃纖維增強熱固性塑料（GRP） 第3部分：管件 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Part 3: Fittings |
| prEN 2218 | 航空航天系列 鋼FE-PL52 S 980 MPa R<(Index)m> 1180 MPa 結構用管件a | Steel FE-PL52 S, 980 MPa R<(Index)m> 1180 MPa; tubes for structures a 4 mm d ≥ 5 a; aerospace series |
| prEN 2219 | 航空航天系列 鋼FE-PL52 S 1030 MPa R<(Index)m> 1230 MPa 結構用管件a | Steel FE-PL52 S, 1030 MPa R<(Index)m> 1230 MPa; tubes for structures a 2 mm d ≥ 5 a; aerospace series |
| prEN ISO 7686 | 塑料管材與管件 不透明度測定 | Plastics pipes and fittings - Determination of opacity (ISO/DIS 7686:2003) / Note: Intended as replacement for EN 578 (1993-07). |
| SY/T 0609 | 優質鋼制對焊管件規范 | Specification for high test wrought butt welding fittings |
| 編號 | 中文名稱 | 英文名稱 |