微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| BS 1103 | 橡膠軟管加強用紡織物的規范 | Specification for fabrics for the reinforcement of rubber hoses |
| BS 1435-2 | 抽油和排油用橡膠軟管組件.貯存、試驗和使用建議 | Rubber hose assemblies for oil suction and discharge services - Recommendations for storage, testing and use |
| BS 1782 | 消防軟管接頭除外的吸入軟管和送水軟管接頭(1.5英寸至8英寸標稱尺寸)規范 | Specification for couplings for suction and delivery hose (11/2 in. to 8 in. nominal sizes) other than fire hose couplings |
| BS 1906 | (標稱尺寸1/8英寸-1/4英寸）軟管接頭(露天和水中使用)規范 | Specification for hose couplings (air and water) (1/8 in. to 11/4 in. nominal sizes) |
| BS 2464 | 汽油、石油和潤滑劑用軟管接頭(標稱尺寸 1/4英寸至 4英寸)規范 | Specification for hose couplings for petrol, oil and lubricants (3/4 in. to 4 in. nominal sizes) |
| BS 2464-2 | 石油、汽油和潤滑油用軟管接頭規范.第2部分:高壓接頭 | Specification for hose couplings for petrol, oil and lubricants - High pressure couplings |
| BS 2464-3 | 汽油、石油和潤滑劑用軟管接頭規范.第3部分:快速接頭 | Specification for hose couplings for petrol, oil and lubricants - Quick-acting couplings |
| BS 2464-4 | 汽油、石油和潤滑劑用軟管接頭規范.第4部分:歐洲型 100mm快速接頭規范 | Hose couplings for petrol, oil and lubricants - Specification for 100 mm quick-acting couplings: European type |
| BS 2952 | 內燃機冷卻系統用橡膠軟管規范 | Specification for rubber hose for i.c. engine cooling systems |
| BS 2F 67 | 航空燃料和發動機潤滑油用軟管規范 | Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes |
| BS 2M 52 | 航空航天流體系統用軟管、管子和配件組件的脈沖試驗法 | Method for impulse testing of hydraulic hose, tubing and fitting assemblies for aerospace fluid systems |
| BS 3169 | 消防急救用卷軸膠管規范 | Specification for first aid reel hoses for fire-fighting purposes |
| BS 3212 | 液化石油氣體氣相與液化石油氣露天裝置用撓性橡皮管、橡皮軟管及軟管組件規范 | Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
| BS 336 | 消防軟管接頭與輔助設備的規范 | Specification for fire hose couplings and ancillary equipment |
| BS 3492 | 公路和鐵路運輸石油產品（包括航空燃油）油罐車軟管及軟管組件規范 | Specification for road and rail tanker hoses and hose assemblies for petroleum products, including aviation fuels |
| BS 3592-1 | 軟管增強鋼絲.第1部分:橡膠軟管增強用鍍覆圓和扁鋼絲規范 | Steel wire for hose reinforcement - Specification for coated round and flat steel wire for rubber hose reinforcement |
| BS 3628 | 通用軟管夾子(蝸桿傳動式)規范 | Specification for hose clips (worm drive type) for general purpose use |
| BS 3710 | 機車及鐵路車輛制動軟管連接器規范 | Specification for brake hose couplings for locomotives and rolling stock |
| BS 3746 | 園藝用聚氯乙烯軟管規范 | Specification for PVC garden hose |
| BS 3F 63 | 航空用低壓氧氣軟管規范 | Specification for low pressure oxygen hose for aeronautical purposes |
| BS 4089 | 液化石油氣和液化天然氣用金屬軟管組件規范 | Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases |
| BS 5122 | 低壓和中壓飽和蒸汽用橡膠軟管規范 | Specification for rubber hoses for low-pressure and medium-pressure saturated steam |
| BS 5173-100 | 橡膠和塑料軟管及軟管組件試驗方法.第100部分:總則 | Method of test for rubber and plastics hoses and hose assemblies - General introduction |
| BS 5173-102.10 | 橡膠和塑料軟管組件的試驗方法.第102部分:液壓試驗.第10節:吸油和放油軟管靜液壓試驗 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Hydrostatic tests for oil suction and discharge hose |
| BS 5173-102.3 | 橡膠和塑料軟管及軟管組件試驗方法.第102部分:液壓試驗.第3節:燃料分配泵軟管體積膨脹測定 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of fuel-dispensing pump hoses |
| BS 5173-102.4 | 橡膠和塑料軟管組件試驗方法.第102部分:液壓試驗.第4節:液壓軟管體積膨脹測定 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Determination of volumetric expansion of hydraulic hoses |
| BS 5173-102.8 | 橡膠和塑料軟管及軟管組件試驗方法.第102部分:液壓試驗.第8節:硬質增強熱塑性塑料螺旋管壓力脈沖試驗 | Methods of test for rubber and plastics hoses and hose assemblies - Hydraulic pressure tests - Pressure impulse test for rigid helix reinforced thermoplastics hoses |
| BS 5173-103.13 | 橡膠和塑料軟管及軟管組件試驗方法.第103部分:物理試驗.第13節:抗燃性測定 | Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of resistance to fire |
| BS 5173-103.2 | 橡膠和塑料軟管組件的試驗方法.第103部分:物理試驗.第2節:軟管耐磨損性測定 | Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of crush resistance of hoses |
| BS 5173-103.6 | 橡膠和塑料軟管組件的試驗方法.第103部分:物理試驗.第6節:襯料可燃性測定 | Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of ignitability of lining |
| BS 5173-103.7 | 橡膠和塑料軟管組件的試驗方法.第103部分:物理試驗.第7節:熱塑軟管用剛性聚合物螺紋鋼筋耐斷裂性測定 | Methods of test for rubber and plastics hoses and hose assemblies - Physical tests - Determination of fracture resistance of rigid polymer helical reinforcement in thermoplastics hoses |
| BS 5173-106.2 | 橡膠和塑料軟管組件的試驗方法.第106部分:環境試驗.第2節:高溫老化試驗一般要求 | Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests |
| BS 5244 | 液壓橡膠軟管及軟管組件的使用、貯藏及壽命期限推薦標準 | Recommendations for application, storage and life expiry of hydraulic rubber hoses and hose assemblies |
| BS 5306-1 | 房屋用滅火裝置及設備的實施規則.軟管卷盤和泡沫引入口 | Code of practice for fire extinguishing installations and equipment on premises - Hose reels and foam inlets |
| BS 5315 | 通用軟管夾子(蝸桿驅動型)(米制系列) | Hose clamps (worm drive type) for general purpose use (metric series) |
| BS 5342 | 高壓飽和蒸汽橡膠管規范 | Specification for rubber hoses for high-pressure saturated steam |
| BS 5667-5 | 連續式機械裝卸設備規范.安全性要求.第5部分:松散物料:氣動裝卸用連接器與軟管件 | Specification for continuous mechanical handling equipment - safety requirements - Loose bulk materials: couplings and hose components used in pneumatic handling |
| BS 5842 | 船塢、道路及油輪用熱塑性軟管組件規范 | Specification for thermoplastic hose assemblies for dock, road and tanker use |
| BS 6130-1 | 地瀝青及瀝青用軟管及軟管部件.第1部分:金屬軟管及軟管部件規范 | Hose and hose assemblies for asphalt and bitumen - Specification for flexible metallic hose and hose assemblies |
| BS 6391 | 滅火用無滲漏排水扁形軟管與軟管組件規范 | Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes |
| BS 6501-1 | 金屬軟管組件.波紋形軟管組件的構造和使用指南 | Metal hose assemblies - Guidance on the construction and use of corrugated hose assemblies |
| BS 669-1 | 燃氣灶具用軟管、管接頭和承窩接口.第1部分:采用第1、2類燃氣的家用灶具用帶繞金屬軟管、護罩、接頭配件和 | Flexible hoses, end fittings and sockets for gas burning appliances - Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases |
| BS 669-2 | 燃氣灶具用軟管、接頭和管座.第2部分:使用第1、2類燃氣的家用灶具波紋金屬軟管、封蓋、接頭和管座規范 | Flexible hoses, end fittings and sockets for gas burning appliances - Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st , 2nd and 3rd family gases |
| BS 6920-2.2.2 | 根據非金屬產品對水質影響人接觸類消耗水要求用水的非金屬產品的適宜性.帶臭氣和香料的水.通過軟管、合成管 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Odour and flavour of water - Method of testing odours and flavours imparted to water by hoses and composite pipes and tubes |
| BS 6920-2.2.3 | 通過其對水質的影響確定與人類用水接觸的非金屬產品的適用性.試驗方法.水的氣味和味道.為食品和飲用水制備 | Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Odour and flavour of water - Method of testing tastes imparted to water by hoses for conveying water for food and drink preparation |
| BS 7379 | 塑料/金屬疊層可漲縮軟管規范 | Specification for plastics/metal laminate collapsible tubes |
| BS 8451 | 氣焊切割和相關工藝用橡膠軟管.高度耐扭結重型焊接軟管(H型).規范 | Rubber hoses for gas welding, cutting and allied processes - High kink-resistant heavy duty welding hose (type H) - Specification |
| BS AU 110a | 自動氣壓制動系統用橡膠軟管和軟管組件規范 | Specification for rubber hoses and hose assemblies for automotive air pressure braking systems |
| BS EN 10324 | 鋼絲和鋼絲制品.軟管加筋鋼絲 | Steel wire and wire products - Hose reinforcement wire |
| BS EN 1113 | 衛生開關龍頭用淋浴器軟管 | Shower hoses for (PN 10) sanitary tapware |
| BS EN 12083 | 呼吸保護裝置.帶呼吸軟管的過濾器(無面具裝配).顆粒過濾器、氣體過濾器及顆粒與氣體過濾器.要求、試驗、標 | Respiratory protective devices - Filters with breathing hoses, (non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking |
| BS EN 12115 | 液體或氣體化學藥品用橡膠和熱塑軟管和軟管組件.規范 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| BS EN 12374 | 包裝.軟管.術語 | Packaging - Flexible tubes - Terminology |
| BS EN 12377 | 包裝材料.軟管.封裝氣密性試驗方法 | Packaging - Flexible tubes - Test method for the airtightness of closures |
| BS EN 12434 | 低溫容器.低溫軟管 | Cryogenic vessels - Cryogenic flexible hoses |
| BS EN 1256 | 氣焊設備.焊接、切割和相關工藝用軟管組件規范 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
| BS EN 13045 | 包裝.圓柱形塑料軟管.尺寸和公差 | Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances |
| BS EN 13046 | 包裝.圓柱形金屬軟管.尺寸和公差 | Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances |
| BS EN 13047 | 包裝.錐形金屬軟管.尺寸和公差 | Packaging - Flexible conical metallic tubes - Dimensions and tolerances |
| BS EN 13048 | 包裝.鋁軟管.內部清漆膜厚度測量方法 | Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method |
| BS EN 1327 | 氣焊設備.焊接和類似工藝用熱固性軟管 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| BS EN 13482 | 瀝青用橡膠軟管及軟管組件.規范 | Rubber hoses and hose assemblies for asphalt and bitumen - Specification |
| BS EN 13483 | 已測定的燃料分配系統用帶內部蒸氣回收的橡膠和塑料軟管和軟管組件.規范 | Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification |
| BS EN 1360 | 計量的燃料配送系統用橡膠和塑料軟管和軟管組件.規范 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems - Specification |
| BS EN 1361 | 航空燃料輸送用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| BS EN 13765 | 烴類、溶劑和化學品輸送用熱塑性多層(非硫化)軟管和軟管組件.規范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| BS EN 13766 | 液化石油氣和液化天然氣輸送用熱塑性多層非硫化軟管和軟管組件.規范 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| BS EN 138 | 呼吸保護裝置.與全罩式面罩、半罩式面罩或口承裝置一起使用的新鮮空氣軟管呼吸機規范 | Respiratory protective devices - Specification for fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly |
| BS EN 13905 | 衛生設備旋塞用低阻力淋浴軟管 | Low resistance shower hoses for sanitary tapware |
| BS EN 14420-1 | 帶夾具的軟管配件.第1部分:要求、測量、名稱與符號及測試 | Hose fittings with clamp units - Part 1: Requirements, survey, designation and testing |
| BS EN 14420-2 | 帶夾件的軟管配件.軟管尾部的軟管側面部件 | Hose fittings with clamp units - Hose side parts of hose tail |
| BS EN 14420-3 | 帶夾件的軟管配件.栓接或銷接夾件 | Hose fittings with clamp units - Clamp units, bolted or pinned |
| BS EN 14420-4 | 帶夾件的軟管配件.第4部分:法蘭連接 | Hose fittings with clamp units - Part 4: Flange connections |
| BS EN 14420-5 | 帶夾件的軟管配件.螺紋連接 | Hose fittings with clamp units - Threaded connections |
| BS EN 14420-6 | 帶夾件的軟管配件.第6部分:TW油槽車聯接器 | Hose fittings with clamp units - Part 6: TW tank truck couplings |
| BS EN 14420-7 | 帶夾件的軟管配件.第7部分:凸輪鎖緊聯接器 | Hose fittings with clamp units - Part 7: Cam locking couplings |
| BS EN 14420-8 | 帶夾件的軟管配件.對稱半聯軸節(吉爾曼系統) | Hose fittings with clamp units - Symmetrical half coupling (Guillemin system) |
| BS EN 14422 | 液化石油氣(LPG)輸送軟管用夾具型連接組件 | Clamp type coupling assemblies for LPG transfer hoses |
| BS EN 14423 | 額定壓力到18bar的蒸汽軟管用夾具型連接組件 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| BS EN 14424 | 帶螺旋箍的軟管管件 | Hose fittings with screwed ferrules |
| BS EN 14454 | 防飲用水回流污染的裝置.軟管接頭防回流裝置DN 15～DN 32.A型H系列 | Devices to prevent pollution by backflow of potable water - Hose union backflow preventer DN 15 to DN 32 inclusive - Family H, type A |
| BS EN 14540 | 消防軟管.固定系統用非滲濾吹塑軟管 | Fire-fighting hoses - Non-percolating layflat hoses for fixed systems |
| BS EN 14585-1 | 壓力設備用金屬波紋軟管組件.要求 | Corrugated metal hose assemblies for pressure applications - Requirements |
| BS EN 14800 | 使用氣體燃料家用器具連接用波紋狀安全金屬軟管組件 | Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels |
| BS EN 1680 | 塑料軟管系統.聚乙烯(PE)管道系統用的閥門.彎曲力施加在工作機構上和之后的密封性的檢驗方法 | Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism |
| BS EN 1761 | 燃料卡車交付的橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for fuel truck delivery - Specification |
| BS EN 1762 | 25巴(2,5MPA)以下液化石油氣(LPG)(液相或氣相)以及天然氣用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification |
| BS EN 1765 | 油吸放裝置用橡膠軟管組件.組件規范 | Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies |
| BS EN 24641 | 吸水和排水用橡膠軟管規范 | Rubber hoses for water suction and discharge - Specification |
| BS EN 26801 | 橡膠或塑料軟管.體積膨脹的測定 | Rubber or plastics hoses - Determination of volumetric expansion |
| BS EN 26802 | 金屬絲增強橡膠塑料軟管及軟管配件.抗沖擊試驗 | Rubber and plastics hoses and hose assemblies - Wire reinforced - Hydraulic impulse test with flexing |
| BS EN 269 | 呼吸保護裝置.帶保護罩的動力驅動的新鮮空氣軟管呼吸機規范 | Respiratory protective devices - Specification for powered fresh air hose breathing apparatus incorporating a hood |
| BS EN 27326 | 橡膠和塑料軟管.靜態條件下耐臭氧性評定 | Rubber and plastics hoses - Assessment of ozone resistance under static conditions |
| BS EN 28029 | 塑料軟管.織物增強的通用可拆卸水管規范 | Plastics hose - General purpose collapsible water hose, textile reinforced - Specification |
| BS EN 29168 | 牙鉆手柄.軟管連接件 | Dental handpieces - Hose connectors |
| BS EN 559 | 氣焊設備.焊接、切割和相關工藝用橡膠軟管 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes |
| BS EN 560 | 氣焊設備.焊接、切割和相關工藝用設備的軟管連接 | Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes |
| BS EN 60684-3-212 | 絕緣軟管.各種型號軟管規范.熱收縮聚烯烴軟管 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 212: Heat-shrinkable polyolefin sleevings |
| BS EN 60684-3-216 | 柔性絕緣軟管.各種型號軟管規范.熱收縮、阻燃、耐火軟管 | Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable, flame-retarded, limited-fire hazard sleeving |
| BS EN 60684-3-228 | 絕緣軟套管.各種型號軟管規范.阻燃、耐流體、收縮比2:1的熱收縮、半硬質聚偏二氟乙烯軟套管 | Flexible insulating sleeving - Specification requirements for individual types of sleeving - Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| BS EN 60684-3-233 | 柔性絕緣軟管.各種型號軟管規范.熱收縮氟彈性體軟管、阻燃、耐流體、收縮比2:1 | Flexible insulating sleeving - Specifications for individual types of sleeving - Heat-shrinkable fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 |
| BS EN 61770 | 連接總水管的電氣儀表.避免軟管組件反虹吸和損壞 | Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets |
| BS EN 62237 | 帶電作業.與液壓工具和設備一起使用的帶配件的絕緣軟管 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| BS EN 694 | 消防軟管.固定系統的半硬性軟管 | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| BS EN 739 | 醫療用氣體設備的低壓軟管組件 | Low-pressure hose assemblies for use with medical gases |
| BS EN 788 | 運輸食品用的口袋.復合薄膜材料制的軟管狀提袋 | Sacks for the transport of food aid - Tubular sacks made of composite film |
| BS EN 853 | 軟管和軟管組件.金屬絲編織加強的液壓用類型.規范 | Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification |
| BS EN 854 | 橡膠軟管及管組件.紡織物增強的液壓用類型.規范 | Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification |
| BS EN 855 | 塑料軟管和軟管組件.熱塑料紡織物增強的液壓用類型.規范 | Plastics hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification |
| BS EN 856 | 橡膠軟管和軟管組件.橡膠包覆螺旋形金屬絲增強的液壓用類型.規范 | Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification |
| BS EN 857 | 軟管及軟管部件.液壓用的金屬線編帶增強的抗擠壓類型.規范 | Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification |
| BS EN ISO 10380 | 管道系統.波紋狀金屬軟管和軟管組件 | Pipework - Corrugated metal hoses and hose assemblies |
| BS EN ISO 10806 | 管道工程.波紋狀金屬軟管用配件 | Pipework - Fittings for corrugated metal hoses |
| BS EN ISO 10960 | 橡膠和塑料軟管.在動態條件下耐臭氧性的評定 | Rubber and plastic hoses - Assessment of ozone resistance under dynamic conditions |
| BS EN ISO 11758 | 橡膠和塑料軟管.氙弧燈下照射.顏色和外觀變化的測定 | Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance |
| BS EN ISO 1307 | 工業通用橡膠和塑料軟管.內直徑和公差.長度公差 | Rubber and plastics hoses for general-purpose industrial applications - Bore diameters and tolerances, and tolerances on length |
| BS EN ISO 13628-2 | 石油和天然氣工業.海底采油系統的設計和操作.海底和海洋設備用未結合軟管系統 | Petroleum and natural gas industries - Design and operation of subsea production systems - Unbonded flexible pipe systems for subsea and marine applications |
| BS EN ISO 1401 | 農業噴霧機用橡膠軟管 | Rubber hoses for agricultural spraying |
| BS EN ISO 1402 | 橡膠和塑料軟管及軟管組件.液壓靜力試驗 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing |
| BS EN ISO 1403 | 一般水用織物增強橡膠軟管.規范 | Rubber hoses, textile-reinforced, for general-purpose water applications - Specification |
| BS EN ISO 14113 | 氣焊設備.最大設計氣壓為450巴的壓縮和液化氣用橡膠和塑料軟管組件 | Gas welding equipment - Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar |
| BS EN ISO 14557 | 消防水龍帶.橡膠和塑料抽吸軟管和軟管組件 | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies |
| BS EN ISO 15465 | 管道.帶繞金屬軟管和軟管組件 | Pipework - Stripwound metal hoses and hose assemblies |
| BS EN ISO 15540 | 船舶與海上技術,軟管組件的耐火性.試驗方法 | Ships and marine technology - Fire resistance of hose assemblies - Test methods |
| BS EN ISO 15541 | 船舶和航海技術.軟管組件的抗燃性.試驗板的要求 | Ships and marine technology - Fire resistance of hose assemblies - Requirements for the test bench |
| BS EN ISO 1746 | 橡膠或塑料軟管和管件.彎曲試驗 | Rubber or plastics hoses and tubing - Bending tests |
| BS EN ISO 2398 | 壓縮空氣用紡織纖維增強橡膠軟管規范 | Rubber hose, textile-reinforced, for compressed air - Specification |
| BS EN ISO 3861 | 噴砂用橡膠軟管.規范 | Rubber hoses for sand and grit blasting - Specification |
| BS EN ISO 3994 | 塑料軟管.抽吸和排放含水物的螺旋型熱塑增強的熱塑軟管.規范 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification |
| BS EN ISO 4023 | 蒸氣用橡膠軟管.試驗方法 | Rubber hoses for steam - Test methods |
| BS EN ISO 4080 | 橡膠和塑料軟管及軟管組件.透氣性測定 | Rubber and plastics hoses and hose assemblies - Determination of permeability to gas |
| BS EN ISO 4671 | 橡膠和塑料軟管和軟管組件.尺寸測量方法 | Rubber and plastics hoses and hose assemblies - Methods of measurement of dimensions |
| BS EN ISO 4672 | 橡膠和塑料軟管.低于室溫的柔性試驗 | Rubber and plastics hoses - Sub-ambient temperature flexibility tests |
| BS EN ISO 5771 | 輸送無水氨用橡膠軟管和軟管組件.規范 | Rubber hose and hose assemblies for transferring anhydrous ammonia - Specification |
| BS EN ISO 5774 | 塑料軟管.壓縮空氣用織物增強的.規范 | Plastics hoses, textile-reinforced, for compressed air - Specification |
| BS EN ISO 6134 | 飽和蒸汽用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for saturated steam - Specification |
| BS EN ISO 6224 | 普通水用織物增強塑料軟管 | Plastics hoses, textile-reinforced, for general-purpose water applications - Specification |
| BS EN ISO 6803 | 橡膠或塑料軟管和軟管組件.非彎曲液壓脈沖試驗 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing |
| BS EN ISO 6806 | 油燃燒器用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for use in oil burners - Specification |
| BS EN ISO 6807 | 旋轉式鉆探和振動用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specifications |
| BS EN ISO 6808 | 石油類液體抽吸和低壓排放用塑料軟管和軟管組件.規范 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification |
| BS EN ISO 6945 | 橡膠軟管.外涂層耐磨性的測定 | Rubber hoses - Determination of abrasion resistance of the outer cover |
| BS EN ISO 7233 | 橡膠和塑料軟管及軟管部件.吸入阻力測定 | Rubber and plastics hoses and hose assemblies - Determination of suction resistance |
| BS EN ISO 7369 | 管道.金屬軟管和軟管組件.詞匯 | Pipework - Metal hoses and hose assemblies - Vocabulary |
| BS EN ISO 7662 | 橡膠和塑料軟管.內襯磨損的測定 | Rubber and plastics hoses - Determination of abrasion of lining |
| BS EN ISO 7751 | 橡膠和塑料軟管和軟管組件.試驗壓力和爆破壓力與設計工作壓力之比 | Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to design working pressure |
| BS EN ISO 7840 | 小艇.耐火燃油軟管 | Small craft - Fire-resistant fuel hoses |
| BS EN ISO 8028 | 無空氣涂料噴涂用塑料和/或橡膠軟管組件.規范 | Rubber and/or plastics hose assemblies for airless paint spraying - Specification |
| BS EN ISO 8030 | 橡膠和塑料軟管.易燃性試驗方法 | Rubber and plastics hoses - Method of test for flammability |
| BS EN ISO 8031 | 橡膠和塑料軟管和軟管組件.電阻的測定 | Rubber and plastics hoses and hose assemblies - Determination of electrical resistance |
| BS EN ISO 8032 | 橡膠和塑料軟管組件.液壓脈沖彎曲試驗(半Ω 型試驗) | 橡膠和塑料軟管組件.液壓脈沖彎曲試驗(半Ω 型試驗) |
| BS EN ISO 8033 | 橡膠和塑料軟管.部件間粘合力的測定 | Rubber and plastics hoses - Determination of adhesion between components |
| BS EN ISO 8308 | 橡膠和塑料軟管和管系.軟管和管壁的透液量的測定 | Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls |
| BS EN ISO 8330 | 橡膠和塑料軟管和軟管配件.詞匯 | Rubber and plastics hoses and hose assemblies - Vocabulary |
| BS EN ISO 8469 | 小艇.非耐火燃氣軟管 | Small craft - Non-fire-resistant fuel hoses |
| BS EN ISO 8580 | 橡膠和塑料軟管.靜態抗紫外線輻射測試 | Rubber and plastics hoses - Determination of ultra-violet resistance under static conditions |
| BS ISO 11237-1 | 橡膠軟管和軟管組件.用于液壓系統的金屬絲編織增強壓實型軟管和軟管組件.規范.用于油基液體 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Oil-based fluid applications |
| BS ISO 11237-2 | 橡膠軟管和軟管組件.用于液壓系統的金屬絲編織增強壓實型軟管和軟管組件.規范.用于水基液體 | Rubber hoses and hose assemblies - Wire-braid-reinforced compact types for hydraulic applications - Specification - Water-based fluid applications |
| BS ISO 11424 | 內燃機氣動系統和真空系統用橡膠軟管和導管.規范 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines - Specification |
| BS ISO 11425 | 機動車動力轉向裝置用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for automobile power-steering systems - Specification |
| BS ISO 12151-1 | 液壓流體力學和一般用途的連接件.軟管配件.有ISO 8434-3 O型環對接密封端的軟管組件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-3 O-ring face-seal ends |
| BS ISO 12151-2 | 液壓傳動和通用聯接件.軟管接頭.帶ISO 8434-1和ISO 8434-4 O形圈24錐形末端的軟管接頭 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings |
| BS ISO 12151-3 | 液壓流體力學和一般應用的連接件.軟管配件.帶ISO 6162法蘭端的軟管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6162 flange ends |
| BS ISO 12151-4 | 用于液壓流體傳動和一般用途的接頭.軟管配件.帶ISO 6149米制螺柱端頭的軟管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 6149 metric stud ends |
| BS ISO 12151-5 | 用于液壓流體傳動和一般用途的接頭.軟管組件.帶ISO 8434-2 37°擴口端的軟管配件 | Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-2 37 ° flared ends |
| BS ISO 13363 | 船用發動機排濕系統用橡膠和塑料軟管.規范 | Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification |
| BS ISO 13774 | 輸送內燃機燃料用橡膠和塑料軟管.易燃性試驗方法 | Rubber and plastics hoses for fuels for internal combustion engines - Method of test for flammability |
| BS ISO 13775-1 | 汽車用熱塑管和軟管.非燃料應用 | Thermoplastic tubing and hoses for automotive use - Non-fuel applications |
| BS ISO 13775-2 | 汽車用熱塑管和軟管.石油類燃料用 | Thermoplastic tubing and hoses for automotive use - Petroleum-based fuel applications |
| BS ISO 1436-2 | 橡膠軟管和軟管組件.金屬絲編織增強液壓型.規范.用于水基液體 | Rubber hoses and hose assemblies - Wire-braid-reinforced hydraulic types - Specification - Water-based fluid applications |
| BS ISO 18752 | 橡膠軟管和軟管組件.金屬絲或紡織物.液壓設備用的單胎壓力加強型.規范 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single pressure types for hydraulic applications - Specification |
| BS ISO 19013-2 | 內燃機燃料回路用橡膠軟管和管.規范.汽油燃料 | Rubber hoses and tubing for fuel circuits for internal combustion engines - Specification - Gasoline fuels |
| BS ISO 21012 | 低溫容器.軟管 | Cryogenic vessels - Hoses |
| BS ISO 23933 | 航空航天.等級為135 °C/20.684 kPa (275 °F/3 000 psi) 和135 °C/21 000 kPa (275 °F/3 046 psi)的芳族 | Aerospace series - Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 °C/20 684 kPa (275 °F/3 000 psi) and 135 °C/21 000 kPa (275 °F/3 046 psi) - Procurement specification |
| BS ISO 2929 | 油槽車放油用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for bulk fuel delivery by truck - Specification |
| BS ISO 4079-2 | 橡膠軟管和軟管組件.織物增強液壓型.規范.水基流體的應用 | Rubber hoses and hose assemblies - Textile-reinforced hydraulic types - Specification - Water-based fluid applications |
| BS ISO 4081 | 內燃機用制冷系統用橡膠軟管和管件.規范 | Rubber hoses and tubing for cooling systems for internal-combustion engines - Specification |
| BS ISO 6605 | 液壓傳動.軟管及軟管組件.試驗方法 | Hydraulic fluid power - Hoses and hose assemblies - Test methods |
| BS ISO 6805 | 井下采礦用橡膠軟管和軟管組件.采煤用鋼絲加筋液壓型.規范 | Rubber hoses and hose assemblies for underground mining - Wire-reinforced hydraulic types for coal mining - Specification |
| BS ISO 7314 | 航空航天.液壓系統.金屬軟管組件 | Aerospace - Fluid systems - Metal hose assemblies |
| BS ISO 8066-2 | 汽車空調器用橡膠和塑料軟管及軟管配件.規范.冷卻劑134a | Rubber and plastics hoses and hose assemblies for automotive air conditioning - Specification - Refrigerant 134a |
| BS ISO 8331 | 橡膠和塑料軟管及軟管組件. 選擇、儲存、使用和維修指南 | Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance |
| BS ISO 8789 | 機動車輛運送石油液化氣用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles - Specification |
| BS ISO 8829-2 | 航空.聚四氟乙烯(PTFE)內軟管組件試驗方法.非金屬編制物 | Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Non-metallic braid |
| BS ISO 8913 | 航空航天.輕型聚四氟乙烯(PTFE).分級:400 °F/3000 psi (204 ℃/20684 kPa)和204℃/21000 kPa (400 °F/304 | Aerospace - Lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 400 °F/3000 psi (204 °C/20684 kPa) and 204 °C/21000 kPa (400 °F/3046 psi) - Procurement specification |
| BS M 57 | 航空航天用聚四氟乙烯高溫盤旋狀軟管組件規范 | Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications |
| 編號 | 中文名稱 | 英文名稱 |