微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS B6805 | 焊接、切割及相關工藝用設備的橡膠軟管連接 | Rubber hose connection for equipment for welding, cutting and allied processes |
| JIS B8261 AMD 1 | 液化石油氣用軟管組件(修改件1) | Hose assemblies for liquefied petroleum gas (Amendment 1) |
| JIS B8261 | 液化石油氣用軟管組件 | Hose assemblies for liquefied petroleum gas |
| JIS B8360 | 液壓用鋼絲增強的橡膠軟管組件 | Wire reinforced rubber hose assemblies for hydraulic use |
| JIS B8362 | 液壓用織物增強的熱塑性塑料軟管組件 | Textile reinforced thermoplastic hose assemblies for hydraulic use |
| JIS B8363 | 液壓軟管組件的端部配件及接頭 | End fittings and adapters for hydraulic hose assemblies |
| JIS B8364 | 液壓用織物增強的橡膠軟管組件 | Textile reinforced rubber hose assemblies for hydraulic use |
| JIS B9119 | 噴霧器用軟管聯接器和軟管接頭 | Hose couplings and hose joints for sprayer |
| JIS D2601 | 汽車零件.使用非石油基制動流體的液壓制動系統的制動軟管組件 | Automotive parts -- Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| JIS D2602 | 橡膠.私人汽車和輕型商業車輛用冷卻劑軟管和管.規范 | Rubber -- Coolant hoses and tubing for use on private cars and light commercial vehicles -- Specification |
| JIS D2606 | 汽車零件.空氣制動橡膠軟管和軟管組件 | Automotive parts -- Air brake rubber hose and hose assemblies |
| JIS D2607 | 汽車部件.真空制動橡膠軟管 | Automotive parts -- Vacuum brake rubber hose |
| JIS D3621 | 汽車用軟管夾 | Hose clamps for automobiles |
| JIS F7150 | 小艇.非耐火性燃油軟管 | Small craft -- Non-fire-resistant fuel hoses |
| JIS F7151 | 小艇.耐高溫燃油軟管 | Small craft -- Fire-resistant fuel hoses |
| JIS F7152 | 船用發動機濕排氣系統用橡膠和塑料軟管.規范 | Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification |
| JIS F7333 | 造船.鑄鐵軟管閥 | Shipbuilding -- Cast iron hose valves |
| JIS F7334 | 造船.青銅軟管閥 | Shipbuilding -- Bronze hose valves |
| JIS F7335 AMD 1 | 造船.軟管連接件和管件(修改件1) | Shipbuilding -- Hose connections and fittings (Amendment 1) |
| JIS F7335 | 造船.軟管連接件和管件 | Shipbuilding -- Hose connections and fittings |
| JIS K6330-1 | 橡膠和塑料軟管的測試方法.第1部分:軟管和軟管組件尺寸的測量方法 | Testing methods for rubber and plastics hoses -- Part 1: Methods of measurement of dimensions for hoses and hose assemblies |
| JIS K6330-10 | 橡膠和塑料軟管的試驗方法.第10部分:通過軟管壁對液體傳輸進行的測定 | Testing methods for rubber and plastics hoses -- Part 10: Determination of transmission of liquids through hose walls |
| JIS K6330-2 | 橡膠和塑料軟管的測試方法.第2部分:液體靜力法 | Testing methods for rubber and plastics hoses -- Part 2: Hydrostatic testing |
| JIS K6330-3 | 橡膠和塑料軟管的測試方法.第2部分:抽吸阻力的測定 | Testing methods for rubber and plastics hoses -- Part 3: Determination of suction resistance |
| JIS K6330-4 | 橡膠和塑料軟管的測試方法.第4部分:低于室溫的彎曲試驗 | Testing methods for rubber and plastics hoses -- Part 4: Sub-ambient temperature flexibility tests |
| JIS K6330-5 | 橡膠和塑料軟管的測試方法.第5部分:電阻的測定 | Testing methods for rubber and plastics hoses -- Part 5: Determination of electrical resistance |
| JIS K6330-6 | 橡膠和塑料軟管的測試方法.第6部分:部件間附著力的測定 | Testing methods for rubber and plastics hoses -- Part 6: Determination of adhesion between components |
| JIS K6330-7 | 橡膠和塑料軟管的測試方法.第7部分:靜態條件下對臭氧抗性的評估 | Testing methods for rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions |
| JIS K6330-8 | 橡膠和塑料軟管的測試方法.第8部分:無撓曲的液壓脈沖試驗 | Testing methods for rubber and plastics hoses -- Part 8: Hydraulic-pressure impulse test without flexing |
| JIS K6330-9 | 橡膠和塑料軟管的測試方法.第9部分:軟管和管件的彎曲性能 | Testing methods for rubber and plastics hoses -- Part 9: Bending properties of hoses and tubing |
| JIS K6331 AMD 1 | 一般用途的供水用的織物增強的橡膠軟管.規范（修改件1） | Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification (Amendment 1) |
| JIS K6331 | 一般用途的供水用的織物增強的橡膠軟管.規范 | Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification |
| JIS K6332 AMD 1 | 壓縮空氣用紡織物增強式橡膠軟管.規范（修改件1） | Rubber hose, textile-reinforced, for compressed air -- Specification (Amendment 1) |
| JIS K6332 | 壓縮空氣用的織物增強的橡膠軟管.規范 | Rubber hose, textile-reinforced, for compressed air -- Specification |
| JIS K6333 AMD 1 | 氣焊設備.焊接、切割和有關加工工藝用橡膠軟管(修改件1) | Gas welding equipment -- Rubber hoses for welding, cutting and allied processes (Amendment 1) |
| JIS K6333 | 氣焊設備.焊接、切割及相關工藝用橡膠軟管 | Gas welding equipment -- Rubber hoses for welding, cutting and allied processes |
| JIS K6335 AMD 1 | 蒸汽用橡膠軟管和軟管組件.規范（修改件1） | Rubber hoses and hose assemblies for steam -- Specification (Amendment 1) |
| JIS K6335 | 蒸汽用橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies for steam -- Specification |
| JIS K6338 | 吸水和排水用的橡膠軟管.規范 | Rubber Hoses for Water Suction and Discharge -- Specification |
| JIS K6339 | 農業用噴霧器熱塑性塑料軟管 | Spray thermoplastic hoses for agricultural use |
| JIS K6343 | 卸油用橡膠軟管 | Rubber hoses for oil discharge |
| JIS K6346 | 海岸吸油和卸油用的橡膠軟管和軟管組件.規范 | Rubber hoses and hose assemblies -- On-shore oil suction and discharge -- Specification |
| JIS K6347-1 | 液化石油氣用橡膠軟管(LPG軟管).第1部分:汽車、一般設備和家用.規范 | Rubber hoses for liquefied petroleum gases (LPGs) -- Part 1: Automobile, General equipment and home application -- Specification |
| JIS K6347-2 | 液化石油氣用橡膠軟管(LPG軟管).第2部分:松散材料輸送設備.規范 | Rubber hoses for liquefied petroleum gases (LPG) -- Part 2: Bulk transfer applications -- Specification |
| JIS K6347-3 | 液化石油氣用橡膠軟管.第3部分:分配軟管及軟管組合件.規范 | Rubber hoses for liquefied petroleum gases (LPGs) -- Part 3: Dispensing hoses and hose assemblies -- Specification |
| JIS K6348 | 氣體用橡膠管 | Rubber tubes for gas |
| JIS K6349-1 | 液壓用鋼絲增強橡膠軟管.第1部分:橡膠軟管和軟管組件.線增強液壓型.規范 | Wire reinforced rubber hoses for hydraulic -- Part 1: Rubber hoses and hose assemblies -- Wire-reinforced hydraulic type -- Specification |
| JIS K6349-2 | 液壓用鋼絲增強橡膠軟管.第2部分:橡膠軟管和軟管組件.橡膠包覆的螺旋線增強液壓型.規范 | Wire reinforced rubber hoses for hydraulic -- Part 2: Rubber hoses and hose assemblies -- Rubber-covered, spiral wire reinforced, hydraulic type -- Specification |
| JIS K6349-3 ERRATUM 1 | 液壓系統用鋼絲增強橡膠軟管.第3部分:鋼絲增強橡膠軟管(勘誤 1) | Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses (Erratum 1) |
| JIS K6349-3 | 液壓用鋼絲增強橡膠軟管.第3部分:線增強橡膠軟管 | Wire reinforced rubber hoses for hydraulic -- Part 3: Wire reinforced rubber hoses |
| JIS K6351 | 氣體用金屬線增強橡膠軟管和軟管配件 | Wire reinforced rubber hoses and hose assemblies for gas |
| JIS K6375 | 塑料軟管和軟管組件.液壓型織物增強的熱塑性塑料.規范 | Plastics hoses and hose assemblies -- Thermoplastics, textile-reinforced, hydraulic type -- Specification |
| JIS K6379 | 塑料軟管和軟管組件.織物增強的液壓型.規范 | Rubber hoses and hose assemblies -- Textile-reinforced hydraulic type -- Specification |
| JIS S2145 AMD 1 | 氣體用金屬撓性軟管(修改件1) | Metallic flexible hoses for gas (Amendment 1) |
| JIS S2145 | 氣體用金屬撓性軟管 | Metallic flexible hoses for gas |
| JIS S2146 | 煤氣用雙頭速接橡膠管和聚氯乙烯軟管 | Rubber tubes and polyvinyl chloride hoses with both end convenient joints for gas |
| JIS S2146 | 煤氣用雙頭速接橡膠管和聚氯乙烯軟管 | Rubber tubes and polyvinyl chloride hoses with both end convenient joints for gas |
| JIS S2190 | 橡膠管件的管箍 | Bands for rubber tube |
| JIS S3022 | 燃油設備用輸油橡膠軟管 | Oil discharge rubber hoses for oil burning appliances |
| JIS T3270 | 長期使用的輸尿管軟管斯滕特固定模 | Ureteral tube stents for long-term use |
| JIS T5905 | 牙鉆手柄.軟管連接器 | Dental handpieces -- Hose connectores |
| JIS T7111 | 醫療氣體系統使用的軟管組件 | Hose assemblies for use with medical gas systems |
| 編號 | 中文名稱 | 英文名稱 |