微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ANSI ATIS0600009 | 歐盟有害物質標準(RoHS).結構金屬、母線和緊固件適應電鍍的標準 | RoHS - Compliant Plating Standard for Structural Metals, Bus Bars and Fastners |
| ANSI B212.7 | 切削工具.硬質合金工具工業中使用的螺紋緊固件 | Cutting tools - Threaded fasteners used in the carbide tooling industry |
| ANSI SNT 101 | 動力工具.便攜式壓縮空氣驅動的緊固件旋入工具的安全要求 | Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for |
| ANSI SNT101 | 動力工具.便攜式壓縮空氣驅動的緊固件旋鋸安全要求 | Power Tools - Portable, Compressed Air Actuated, Fastener Driving Tools - Safety Requirements for |
| ANSI/ASME B18.12 | 機械緊固件術語集 | Glossary of Terms for Mechanical Fasteners |
| ANSI/ASME B18.18.1 | 通用緊固件的檢驗和質量保證 | Inspection and Quality Assurance for General Purpose Fasteners |
| ANSI/ASME B18.18.2M | 大型機器組裝用緊固件的質量保證和檢驗 | Machine Assembly Fasteners, Inspection and Quality Assurance for High Volume |
| ANSI/ASME B18.18.3M | 專用緊固件的檢查和質量保證 | Inspection and Quality Assurance for Special Purpose Fasteners |
| ANSI/ASME B18.18.4M | 高度專業化工程應用的緊固件的質量保證和檢驗 | Fasteners for Highly Specialized Engineered Applications, Inspection and Quality Assurance for |
| ANSI/ASME B18.18.6M | 按第三方鑒定系統生產的緊固件質量保證方案 | Quality Assurance Plan for Fasteners Produced in a Third Party Accreditation System |
| ANSI/ASME B18.18.7M | 按用戶批準的控制方案生產的緊固件的質量保證方案 | Quality Assurance Plan for Fasteners Produced in a Customer Approved Control Plan |
| ANSI/ASME B18.2.6 | 建筑結構中緊固件的使用 | Fasteners for Use in Structural Applications |
| ANSI/ASME B18.24 | B18緊固件制品的部件識別號(PIN)代碼體系標準 | Part Identifying Number (PIN) Code System Standard for B18 Fastener Products |
| ANSI/ASME B18.24a | B18緊固件制品的部件識別號(PIN)代碼體系標準 | Part Identifying Number (PIN) Code System Standard for B18 Fastener Products |
| ANSI/ASME MH1.7M-1996 mh 1 | 托盤及相關結構件的裝配用驅動緊固件 | Driven Fasteners for Assembly of Pallets and Related Structures |
| ANSI/ASTM A962/A 962M | 低溫至蠕變范圍內任何溫度下工作的鋼緊固件和/或緊固件材料通用要求規范 | Specification for Common Requirements, for Steel Fasteners and/or Fastener Materials Intended for Use at Any Temperature from Cryogenic to the Creep Range |
| ANSI/ASTM D6117 | 廢塑料加工機械緊固件試驗方法 | Test Method for Mechanical Fasteners in Plastic Lumber and Shapes |
| ANSI/SAE J121 | 淬硬及回火螺紋緊固件的脫碳 | Fasteners, Decarburization in Hardened and Tempered Threaded |
| ANSI/SAE J174 | 扭矩.鋼制螺紋緊固件拉伸試驗程序.英制系列 | Torque - Tension Test Procedure for Steel Threaded Fasteners - Inch Series |
| ANSI/SAE J174M | 扭矩.鋼制螺紋緊固件拉伸試驗程序.米制系列 | Torque - Tension Test Procedure for Steel Threaded Fasteners - Metric Series |
| ANSI/SAE J2270 | 船舶系統和設備.螺紋緊固件.檢驗、試驗和安裝要求 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Requirements |
| ANSI/SAE J2295 | 緊固件.零件標準帽螺釘、六角頭螺栓和六角螺母 | Fasteners - Part Standard Cap Screws, Hex Bolts, and Hex Nuts |
| ANSI/SAE J429 | 外螺紋緊固件的機械和材料要求 | Mechanical and Material Requirements for Externally Threaded Fasteners |
| ANSI/SAE J430 | 無螺紋緊固件碳鋼實心鉚釘?shù)臋C械和化學要求 | Mechanical and Chemical Requirements for Nonthreaded Fasteners Carbon Steel Solid Rivets |
| ANSI/SPRI FX-1 | 測定屋面緊固件拔出阻力的實地試驗標準程序 | Standard Field Test Procedure for Determining the Withdrawal Resistance of Roofing Fasteners |
| ASME A112.19.9M | 未上釉陶瓷管道緊固件 | (Non-vitreous ceramic plumbing fixtures) |
| ASME B18.12 | 機械緊固件術語匯編 | (Glossary of terms for mechanical fasteners) |
| ASME B18.18.1M | 通用緊固件的檢驗和質量保證 | (Inspection and quality assurance for general purpose fasteners) |
| ASME B18.18.3M | 專用緊固件的檢驗和質量保證 | (Inspection and quality assurance for special purpose fasteners) |
| ASME B18.18.4M | 高度專業化設計應用中緊固件的檢驗和質量保證 | (Inspection and quality assurance for fasteners for highly specialized engineered applications) |
| ASME B18.2.6 | 用于結構的緊固件 | (Fasteners for use in structural applications) |
| ASME FAP-1a Addenda | 緊固件制造商和分配者用的質量保證計劃要求.修改件 | (Quality assurance program requirements for fastener manufacturers and distributors; Addenda) |
| ASME MH1.7M | 托盤及相關結構的組合用傳動緊固件 | (Driven fasteners for assembly of pallets and related structures) |
| ASTM A 354 | 淬火和回火合金鋼螺栓、螺柱和其它外螺紋緊固件的標準規范 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners |
| ASTM A 962/A 962Ma | 低溫至蠕變范圍內任何溫度用鋼制緊固件或緊固件材料或兩者的通用要求的標準規范 | Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range |
| ASTM B 839 | 金屬鍍覆的外螺紋制品、緊固件和棒的殘留脆變的標準試驗方法.傾斜楔入法 | Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod - Inclined Wedge Method |
| ASTM D 1761 | 機械緊固件在木制品中的標準試驗方法 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D 4932 | 屋面層和防水薄板、屋面卷材、木瓦的抗緊固件斯裂和破裂的試驗方法 | Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing and Shingles |
| ASTM D 5169 | 鉤狀和環狀連接緊固件的剪切強度的試驗方法(動態法)的標準試驗方法 | Standard Test Method for Shear Strength (Dynamic Method) of Hook and Loop Touch Fasteners |
| ASTM D 5170 | 鉤狀和環狀連接緊固件的坯料剝離強度的標準試驗方法("T"方法) | Standard Test Method for Peel Strength ("T" Method) of Hook and Loop Touch Fasteners |
| ASTM D 5648 | 螺紋緊固件用膠粘劑的轉矩拉力的標準試驗方法 | Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity) |
| ASTM D 5657 | 螺紋緊固件用膠粘劑的流體密封能力的標準試驗方法 | Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners |
| ASTM D 6117 | 塑料成材和形材內機械緊固件的標準試驗方法 | Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes |
| ASTM D 6294 | 用于屋頂和防水屋頂?shù)蔫F金屬緊固件組件的耐腐蝕性的標準試驗方法 | Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing |
| ASTM D 7332/D 7332M | 測量纖維增強聚合物基復合材料緊固件耐拉伸性的標準試驗方法 | Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite |
| ASTM E 1190 | 安裝在結構構件中的機械傳動緊固件強度的標準試驗方法 | Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members |
| ASTM E 1685 | 使用超聲脈沖回波技術測量緊固件長度變化的標準操作規程 | Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique |
| ASTM E 2265 | 混凝土和磚石工程用錨和緊固件的標準術語 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM F 1077 | F16緊固件規范委員會選擇的標準指南 | Standard Guide for Selection of Committee F16 Fastener Specifications |
| ASTM F 1135 | 緊固件用鉻酸鎘或鋅有機防蝕鍍層標準規范 | Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners |
| ASTM F 1136 | 緊固件用鋅/鋁防蝕鍍層的標準規范 | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners |
| ASTM F 1136M | 緊固件的抗鋅/鋁腐蝕涂層的標準規范(米制) | Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners [Metric] |
| ASTM F 1428 | 緊固件用非有機頂涂層,防腐蝕涂層的鋁顆粒填充底涂層/有機物 | Aluminum Particle-Filled Basecoat/Organic of Inorganic Topcoat, Corrosion Protective Coatings for Fasteners |
| ASTM F 1470 | 特定的機械性能和功能檢測用緊固件抽樣的標準指南 | Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection |
| ASTM F 1667 | 楔入式緊固件標準規范:釘子、長釘和U形釘 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
| ASTM F 1789b | F16機械緊固件標準術語 | Standard Terminology for F16 Mechanical Fasteners |
| ASTM F 1940a | 電鍍或涂覆緊固件中防氫脆的過程控制檢定的標準試驗方法 | Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners |
| ASTM F 1941 | 螺紋緊固件上電鍍覆層的標準規范(統一英制螺紋)(UN/UNR) | Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR)) |
| ASTM F 1941M | 螺紋緊固件電鍍層的標準規范(米制) | Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric] |
| ASTM F 2282 | 機械緊固件用碳鋼和合金鋼絲、桿材、棒材的質量保證要求的標準規范 | Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners |
| ASTM F 2329 | 碳鋼和合金鋼螺栓、螺釘、墊圈、螺母和特殊螺紋緊固件用熱浸鍍鋅覆層的標準規范 | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| ASTM F 2482 | 負荷指示外螺紋緊固件用標準規范 | Standard Specification for Load-Indicating Externally Threaded Fasteners |
| ASTM F 568M | 碳素和合金鋼外螺紋米制緊固件標準規范 | Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners |
| ASTM F 592 | 有關檢驗和連接緊固件及其操作工具的標準術語 | Standard Terminology of Collated and Cohered Fasteners and Their Application Tools |
| ASTM F 606 | 測定外螺紋及內螺紋緊固件、墊圈、直接測張器和鉚釘機械特性的標準試驗方法 | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets |
| ASTM F 606M | 外螺紋和內螺紋緊固件、墊圈和鉚釘機械特性測定的標準試驗方法[米制] | Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric] |
| ASTM F 959 | 與結構緊固件一起使用的可壓縮墊圈型直接拉力指示器的標準規格 | Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners |
| ASTM F 959M | 與結構緊固件一起使用的可壓縮墊圈型直接張力指示器的標準規范(米制) | Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric] |
| 編號 | 中文名稱 | 英文名稱 |