微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| JIS B0101 | 螺紋和緊固件.詞匯 | Screw threads and fasteners -- Vocabulary |
| JIS B0143 | 螺紋緊固件用尺寸符號和標識 | Symbols and designations of dimensions for threaded fasteners |
| JIS B1003 | 緊固件.ISO 公制外螺紋零件端頭 | Fasteners -- Ends of parts with external ISO metric thread |
| JIS B1006 | 外螺紋緊固件用退刀螺紋和螺紋根切 | Thread run-outs and thread undercuts for external threaded fasteners |
| JIS B1010 | 緊固件的標識系統 | Designation system for fasteners |
| JIS B1021 | 緊固件公差.第1部分:螺栓、螺釘、螺柱和螺母.產品分級 A、B 和 C | Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C |
| JIS B1022 | 緊固件公差.第3部分:螺栓,螺釘和螺母用墊圈.A級和C級產品 | Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C |
| JIS B1041 | 緊固件.表面缺陷.第1部分:普通要求用螺栓、螺釘和螺柱 | Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements |
| JIS B1042 | 緊固件.表面不連續性.第2部分:螺母 | Fasteners -- Surface discontinuities -- Part 2: Nuts |
| JIS B1043 | 緊固件.表面缺陷.第3部分:特殊要求用螺栓、螺釘和螺柱 | Fasteners -- Surface discontinuities -- Part 3: Bolts, screws and studs for special requirements |
| JIS B1044 | 緊固件.電鍍層 | Fasteners -- Electroplated coatings |
| JIS B1045 | 緊固件.測定氫脆的預加載試驗.平行承載表面法 | Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method |
| JIS B1046 | 緊固件.非電解鋅粉覆蓋層 | Fasteners -- Non-electrolytically applied zinc flake coatings |
| JIS B1047 | 耐腐蝕不銹鋼緊固件的鈍化處理 | Passivation of corrosion-resistant stainless-steel fasteners |
| JIS B1051 ERRATUM 1 | 碳素鋼和合金鋼緊固件的機械特性.第1部分:螺栓、螺釘和螺柱(勘誤1) | (Erratum 1) |
| JIS B1051 | 碳素鋼和合金鋼緊固件的機械特性.第1部分:螺栓、螺釘和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs |
| JIS B1053 | 用碳鋼和合金鋼制成的緊固件的機械特性.第5部分：不低于拉伸強度的緊固螺釘和類似螺紋緊固件 | Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 5: Set screws and similar threaded fasteners not under tensile stresses |
| JIS B1054-1 | 耐腐蝕不銹鋼緊固件的機械性能.第1部分:螺栓、螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 1: Bolts, screws and studs |
| JIS B1054-2 | 耐腐蝕不銹鋼緊固件的機械特性.第2部分:螺母 | Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 2: Nuts |
| JIS B1054-3 | 耐腐蝕不銹鋼緊固件的機械特性.第3部分:無拉伸應力的定位螺釘和類似緊固件 | Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 3: Set screws and similar fasteners not under tensile stress |
| JIS B1054-4 | 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘 | Mechanical properties of corrosion-resistant stainless-steel fasteners -- Part 4: Tapping screws |
| JIS B1057 | 有色金屬緊固件的機械性能 | Mechanical properties of non-ferrous metal fasteners |
| JIS B1058 | 緊固件的機械特性.第7部分:扭力試驗和標稱直徑為1mm-10mm的螺栓和螺釘?shù)淖钚∨ぞ? | Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| JIS B1071 | 緊固件尺寸和幾何形狀的驗證方法 | Method of verification for size and geometry of threaded fasteners |
| JIS B1081 ERRATUM 1 | 螺紋緊固件.軸向負荷疲勞試驗.試驗方法和結果評定(勘誤1) | Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results (Erratum 1) |
| JIS B1081 | 螺紋緊固件.軸向載荷疲勞試驗.試驗方法和結果評價 | Threaded fasteners -- Axial load fatigue testing -- Test methods and evaluation of results |
| JIS B1082 | 緊固件的應力區和承載區 | Stress area and bearing area for threaded fasteners |
| JIS B1083 | 螺紋緊固件的緊固總則 | General rules for tightening of threaded fasteners |
| JIS B1091 | 緊固件.驗收檢驗 | Fasteners -- Acceptance inspection |
| JIS B1092 | 緊固件.質量保證體系 | Fasteners -- Quality assurance system |
| JIS B1099 | 緊固件.螺栓、螺釘、螺柱和螺母的一般要求 | Fasteners -- General requirements for bolts, screws, studs and nuts |
| JIS E1107 | 魚尾板用鋼螺栓及螺母和緊固件 | Steel bolts and nuts for fish-plates and fastenings |
| JIS E1118 | 預應力混凝土軌枕.鐵軌緊固件 | Prestressed concrete sleepers -- Rail fastenings |
| JIS L3416 | 一觸即合緊固件 | Touch and close fastener |
| 編號 | 中文名稱 | 英文名稱 |