微信掃一掃，立即回復！
| 編號 | 中文名稱 | 英文名稱 |
|---|---|---|
| ISO 10683 | 緊固件 非電解鋅粉覆蓋層 | Fasteners - Non-electrolytically applied zinc flake coatings |
| ISO 10684 | 緊固件.熱浸鍍鋅涂層 | Fasteners - Hot dip galvanized coatings |
| ISO 10964 | 粘合劑 螺紋緊固件上厭氧粘合劑的抗扭強度的測定 | Adhesives; determination of torque strength of anaerobic adhesives on threaded fasteners |
| ISO 1120 | 輸送機皮帶.機械緊固件的強度測定.靜態試驗法 | Conveyor belts - Determination of strength of mechanical fastenings - Static test method |
| ISO 12777-1 | 托盤連接件的試驗方法 第1部分:托盤用釘子、其他榫釘型緊固件和U形釘?shù)目箯澰囼? | Methods of test for pallet joints - Part 1: Determination of bending resistance of pallet nails, other dowel-type fasteners and staples |
| ISO 13584-511 | 工業自動化系統和集成.零件庫.第511部分:通用的機械系統和組件.緊固件參考詞典 | Industrial automation systems and integration - Parts library - Part 511: Mechanical systems and components for general use - Reference dictionary for fasteners |
| ISO 15330 | 緊固件 檢查氫脆用預載荷試驗 平行支承面法 | Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method |
| ISO 15629 | 物料搬運托盤.新托盤組件和用過的木制平托盤檢修用緊固件質量 | Pallets for material handling - Quality of fasteners for assembly of new and repair of used, flat, wooden pallets |
| ISO 16047 | 緊固件.扭矩/夾持力試驗 | Fasteners - Torque/clamp force testing |
| ISO 16048 | 耐腐蝕不銹鋼緊固件的鈍化 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 16426 | 緊固件.質量保證體系 | Fasteners - Quality assurance system |
| ISO 16670 | 木結構.機械緊固件接頭.準靜態逆循環試驗方法 | Timber structures - Joints made with mechanical fasteners - Quasi-static reversed-cyclic test method |
| ISO 225 | 緊固件 螺栓、螺釘、螺柱和螺母 尺寸代號和標注 三種語言版 | Fasteners; Bolts, screws, studs and nuts; Symbols and designations of dimensions Trilingual edition |
| ISO 272 | 緊固件 六角產品 對邊寬度 | Fasteners; Hexagon products; Widths across flats |
| ISO 273 | 緊固件 螺栓和螺釘用通孔 | Fasteners; Clearance holes for bolts and screws |
| ISO 3269 | 緊固件 驗收檢查 | Fasteners - Acceptance inspection |
| ISO 3506-1 | 耐腐蝕不銹鋼緊固件的機械性能 第1部分:螺栓、螺釘和螺柱 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs |
| ISO 3506-2 | 耐腐蝕不銹鋼緊固件的機械性能 第2部分:螺母 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts |
| ISO 3506-3 | 耐腐蝕不銹鋼緊固件的機械性能 第3部分:緊定螺釘及類似的不受拉應力的螺紋緊固件 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress |
| ISO 3506-4 | 耐腐蝕不銹鋼緊固件的機械特性.第4部分:攻絲螺釘 | Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 4: Tapping screws |
| ISO 3508 | 符合ISO 261 和ISO 262 螺紋的緊固件用螺紋收尾 | Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 |
| ISO 3800 | 螺紋緊固件 軸向載荷疲勞試驗 試驗方法和結果評定 | Threaded fasteners; axial load fatigue testing; test methods and evaluation of results |
| ISO 4042 | 緊固件 電鍍層 | Fasteners - Electroplated coatings |
| ISO 4753 | 緊固件 ISO米制外螺紋零件的末端 | Fasteners - Ends of parts with external ISO metric thread |
| ISO 4755 | 緊固件 ISO米制外螺紋用螺紋退刀槽 | Fasteners; Thread undercuts for external metric ISO threads |
| ISO 4759-1 | 緊固件公差 第1部分:螺栓、螺釘、螺栓和螺母 產品等級A、B和C級 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C |
| ISO 4759-3 | 緊固件公差 第3部分:螺栓、螺釘和螺母用平墊圈 產品等級為A和C級 | Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C |
| ISO 5393 | 用于螺紋緊固件的回轉式氣動裝配工具 性能試驗方法 | Rotary tools for threaded fasteners - Performance test method |
| ISO 5845-1 | 技術制圖 緊固件組合的簡單表示法 第1部分:一般原則 | Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 1: General principles |
| ISO 5845-2 | 技術制圖 緊固件組合的簡單表示法 第2部分:航空設備用鉚釘 | Technical drawings - Simplified representation of the assembly of parts with fasteners - Part 2: Rivets for aerospace equipment |
| ISO 6157-1 | 緊固件 表面缺陷 第1部分:螺栓、螺釘和螺柱特殊要求 | Fasteners surface discontinuities; part 1: bolts, screws and studs for general requirements |
| ISO 6157-2 | 緊固件.表面缺陷.第2部分:螺母 | Fasteners - Surface discontinuities - Part 2: Nuts |
| ISO 6157-3 | 緊固件 表面缺陷 第3部分:螺栓、螺釘和螺柱特殊要求 | Fasteners; surface discontinuities; part 3: bolts, screws and studs for special requirements |
| ISO 6305-4 | 鐵道部件 交貨技術條件 第4部分:魚尾板和緊固件用的非處理鋼螺母和螺栓及高強度螺母和螺栓 | Railway components; technical delivery requirements; part 4: untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings |
| ISO 6544 | 安裝螺紋緊固件用手持式氣動工具 扭矩反作用和扭矩沖擊測量 | Hand-held pneumatic assembly tools for installing threaded fasteners; Reaction torque and torque impulse measurements |
| ISO 6891 | 木結構 機械緊固件接頭 強度和變形特性確定的一般原則 | Timber structures; Joints made with mechanical fasteners; General principles for the determination of strength and deformation characteristics |
| ISO 7378 | 緊固件 螺栓、螺釘和螺柱 開口銷孔和金屬絲孔 | Fasteners; Bolts, screws and studs; Split pin holes and wire holes |
| ISO 8839 | 緊固件機械性能 有色金屬制造的螺栓、螺釘、螺柱和螺母 | Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 8969 | 木結構 單側沖孔金屬板緊固件和接頭的試驗 | Timber structures; testing of unilateral punched metal plate fasteners and joints |
| ISO 8970 | 木結構 機械緊固件接頭的試驗 對木材密度要求 | Timber structures; testing of joints made with mechanical fasteners; requirements for wood density |
| ISO 898-1 | 碳鋼和鑄鋼制造的緊固件機械性能 第1部分:螺栓、螺釘和螺柱 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs |
| ISO 898-5 | 碳鋼和鑄鋼制造的緊固件機械性能 第5部分:緊定螺釘及類似的不受拉應力的螺紋緊固件 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners not under tensile stresses |
| ISO 898-7 | 緊固件機械性能 第7部分:螺栓與螺釘?shù)呐ぞ卦囼灪妥钚∨ぞ毓Q直徑1mm～10mm | Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
| ISO 8991 | 緊固件的標記制度 | Designation system for fasteners |
| ISO 8992 | 緊固件.螺栓、螺釘、螺柱和螺母通用技術條件 | Fasteners - General requirements for bolts, screws, studs and nuts |
| ISO/TS 17104 | 螺紋緊固件的旋轉刀具.液壓推動工具.性能試驗方法 | Rotary tool for threaded fasteners - Hydraulic impulse tools - Performance test method |
| 編號 | 中文名稱 | 英文名稱 |