標準號 |
中文名稱 |
英文名稱 |
| ANSI S 2.26-2001 |
機械振動.船上設備的振動試驗要求和驗收準則 |
Mechanical Vibration - Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment |
| ANSI S 3.45-1999 |
測試基本前庭功能的過程 |
Procedures for Testing Basic Vestibular Function |
| ANSI S 3.46-1997 |
助聽器設備的真聲性能特性的測量方法 |
Methods of Measurement of Real-Ear Performance Characteristics of Hearing Aids |
| ANSI S 3.5-1997 |
索引計算方法 |
Methods for the Calculation of the Articulation Index |
| ANSI S 4.55-1997 |
專業音響的推薦操作規程.聲音信號極性的守恒 |
Recommended Practice for Professional Audio - Conservation of the Polarity of Audio Signals |
| ANSI S 4.56-1997 |
專業音頻設備的推薦操作規程.揚聲器的主觀評價 |
Recommended Practice for Professional Audio - Subjective Evaluation of Loudspeakers |
| ANSI S 4.57-1997 |
法醫用推薦規程.用于檢驗的操縱記錄視聽資料 |
Recommended Practice for Forensic Purposes - Managing Recorded Audio Materials Intended for Examination |
| ANSI S1.1-1994 |
聲學術語 |
Acoustical terminology |
| ANSI S1.10-1966 |
傳聲器的校正方法 |
Method for Calibration of Microphones |
| ANSI S1.11-1986 |
倍頻帶和分?jǐn)?shù)倍頻帶模擬及數字濾波器的規范 |
Specification for octave-band and fractional-octave-band analog and digital filters |
| ANSI S1.11-2004 |
倍頻帶和分?jǐn)?shù)倍頻帶模擬及數字濾波器的規范 |
|
| ANSI S1.13-1995 |
空氣中聲壓級的測量方法 |
Measurement of sound pressure levels in air |
| ANSI S1.13-2005 |
空氣中聲壓級的測量 |
|
| ANSI S1.15 Part 2-2005 |
測試傳聲器.第2部分:用互易技術對實驗室標準傳聲器進行壓力校準的主要方法 |
|
| ANSI S1.17 Part 1-2004 |
傳聲器風擋.第1部分:靜止或細微氣流的介入損失的測量和規范 |
|
| ANSI S1.20-1988 |
水下電聲換能器校準的程序 |
Procedures for calibration of underwater electro-acoustic transducers |
| ANSI S1.22-1992 |
聲波的頻率特性和極線圖表的比例、尺寸 |
Scales and sizes for frequency characteristics and polar diagrams in acoustics |
| ANSI S1.25-1991 |
專用噪聲劑量計的規范 |
Specification for personal noise dosimeters |
| ANSI S1.26-1995 |
大氣吸聲的計算方法 |
Method for calculation of the absorption of sound by the atmosphere |
| ANSI S1.4-1983 |
聲級計的規范 |
Specification for sound level meters |
| ANSI S1.40-1984 |
聲學校準器的規范 |
Specification for acoustical calibrators |
| ANSI S1.6-1984 |
聲學測量中的常用頻率的頻帶數 |
Preferred frequencies, frequency levels, and band numbers for acoustical measurements |
| ANSI S1.8-1989 |
聲學級的常用基準量 |
Reference quantities for acoustical levels |
| ANSI S1.9-1996 |
聲強的測量?jī)x器 |
Instruments for the measurement of sound intensity |
| ANSI S12.1-1983 |
測定來自聲源的噪聲發射的標準程序編制指南 |
Guidelines for the preparation of standard procedures to determine the noise emission from sources |
| ANSI S12.10-1985 |
由計算機和商業設備發射的噪聲的測量和表示方法 |
Methods for the measurement and designation of noise emitted by computer and business equipment |
| ANSI S12.10-2002 |
聲學.信息技術設備和電信設備發出的空氣噪聲的測量 |
(Acoustics - Measurement of Airborne Noise Emitted by Information Technology and Telecommunications Equipment ) |
| ANSI S12.11-1987 |
由小型空氣推動裝置發射的噪聲的測量方法 |
Method for the measurement of noise emitted by small air-moving devices |
| ANSI S12.11/1 ISO 10302-1996 (MOD)-2003 |
聲學.小型氣動裝置的噪聲和振動測量.第1部分:空氣噪聲排放 |
(Acoustics - Measurement of Noise and Vibration of Small Air-Moving Devices, Part 1: Airborne noise Emission ) |
| ANSI S12.11/2-2003 |
聲學.小型空氣推動設備的噪聲和振動的測定.第2部分:結構振動 |
(Acoustics - Measurement of noise and vibration of small air-moving devices - Part 2: Structure-borne vibration ) |
| ANSI S12.12-1992 |
根據聲音強度測定噪聲源聲功率級的工程方法 |
Engineering method for the determination of sound power levels of noise sources using sound intensity |
| ANSI S12.14-1992 |
露天固定位置安裝的公共音響警告設備音輸出的現場測量 |
Methods for the field measurement of the sound output of audible public warning devices installed at fixed locations outdoors |
| ANSI S12.15-1992 |
便攜式電動工具、安放于固定位置的電動工具及園藝設備產生的噪聲的測量 |
Acoustics - Portable electric power tools, stationary and fixed electric power tools, and gardening appliances - Measurement of sound emitted |
| ANSI S12.16-1992 |
新機械噪聲規范的指南 |
Guidelines for the specification of noise of new machinery |
| ANSI S12.18-1994 |
室外測量聲壓級的程序 |
Procedures for outdoor measurement of sound pressure level |
| ANSI S12.19-1996 |
職業引起的噪聲測量 |
Measurement of occupational noise exposure |
| ANSI S12.2-1995 |
房屋噪音評定要求 |
Criteria for evaluation room noise |
| ANSI S12.23-1989 |
機械設備發出的聲功率的表示方法 |
Method for the designation of sound power emitted by machinery and equipment |
| ANSI S12.3-1985 |
測定和校驗機械與設備固定噪聲發射的統計方法 |
Statistical methods for determining and verifying stated noise emission values of machinery and equipment |
| ANSI S12.30-1990 |
噪聲試驗規程的制訂和聲功率標準使用導則 |
Guidelines for the use of sound power standards and for the preparation of noise test codes |
| ANSI S12.31-1990 |
在混響室里用精確方法測定寬頻帶噪聲源聲功率級 |
Precision methods for the determination of sound power levels of broad-band noise sources in reverberation rooms |
| ANSI S12.32-1990 |
混響室中離散頻率和窄頻帶噪聲源聲功率的精確測定方法 |
Precision methods for the determination of sound power levels of discrete-frequency and narrow-band noise sources in reverberation rooms |
| ANSI S12.33-1990 |
在混響室里用工程方法測定噪聲源聲功率級 |
Engineering methods for the determination of sound power levels of noise sources in a special reverberation test room |
| ANSI S12.34-1988 |
反射平面上實質自由場條件下噪聲源的聲功率級的工程測定法 |
Engineering methods for the determination of sound power levels of noise sources for essentially free-field conditions over a reflecting plane |
| ANSI S12.35-1990 |
在無回聲和半無回聲的室內測定噪聲源聲功率級 |
Precision methods for the determination of sound power levels of noise sources in anechoic and hemi-anechoic rooms |
| ANSI S12.36-1990 |
噪聲源聲功率級確定的測量方法 |
Survey methods for the determination of sound power levels of noise sources |
| ANSI S12.42-1995 |
頭戴聽力保護裝置的介入損耗測量用耳中擴音器和固定物聲音試驗法 |
Microphone-in-real-ear and acoustic test fixture methods for the measurement of insertion loss of circumaural hearing protection devices |
| ANSI S12.5-1990 |
標準聲源性能和校準的要求 |
Requirements for the performance and calibration of reference sound sources |
| ANSI S12.50-2002 |
聲學.噪聲源的聲級測定.基礎標準使用導則 |
(Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards ) |
| ANSI S12.51-2002 |
聲學.用聲壓測定噪聲源的聲級.混響室精確法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms ) |
| ANSI S12.57-2002 |
聲學.用聲壓測定噪聲源的聲級.現場比對法 |
(Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ ) |
| ANSI S12.6-1997 |
聽力保護器實際聽覺衰減的測量方法 |
Methods for measuring the real-ear attenuation of hearing protectors |
| ANSI S12.60-2002 |
院校的聲學性能標準、設計要求和指南 |
(Acoustical Performance Criteria, Design Requirements and Guidelines for Schools ) |
| ANSI S12.7-1986 |
脈沖噪聲的測量方法 |
Methods for measurement of impulse noise |
| ANSI S12.9 Part 1-1988 |
描述和測量環境聲音的量值及程序.第1部分 |
Quantities and procedures for description and measurement of environmental sound - Part 1 |
| ANSI S12.9 Part 2-1992 |
描述和測量環境聲音的量值及程序.第2部分持久和寬域的聲測量 |
Quantities and procedures for description and measurement of environmental sound - Part 2: Measurement of long-term, wide-area sound |
| ANSI S12.9 Part 3-1993 |
描述和測量環境聲音的量值及程序.第3部分:觀測器的短期測量 |
Quantities and procedures for description and measurement of environmental sound - Part 3: Short-term measurements with an observer present |
| ANSI S12.9 Part 4-1996 |
描述和測量環境聲音的量值及程序.第4部分:持久的公眾回響的預測和噪聲的評定 |
Quantities and procedures for description and measurement of environmental sound - Part 4: Noise assessment and prediction of long-term community response |
| ANSI S2.10-1971 |
撞擊和振動數據的分析和表示方法 |
Methods for Analysis and Presentation of Shock and Vibration Data |
| ANSI S2.11-1969 |
測量撞擊和振動用電傳感器的校準和試驗的選擇 |
Selection of Calibrations and Tests for Electrical Transducers Used for Measuring Shock and Vibration |
| ANSI S2.14-1973 |
撞擊機性能的確定方法 |
Methods for Specifying the Performance of Shock Machines |
| ANSI S2.15-1972 |
輕型設備H1級(強烈碰撞)撞擊試驗機的設計、制造和操作的規范 |
Design, Construction and Operation of Class HI (High-Impact) Shock-Testing Machine for Lightweight Equipment |
| ANSI S2.17-1980 |
機械振動的測量 |
Techniques of machinery vibration measurement |
| ANSI S2.2-1959 |
振動和撞擊拾音器的校正方法 |
Methods for Calibration of Shock and Vibration Pickups |
| ANSI S2.20-1983 |
空氣中單點爆炸特性及在大氣中傳播和影響的評定指南 |
Estimating air blast characteristics for single point explosions in air, with a guide to evaluation of atmospheric propagation and effects |
| ANSI S2.25-2004 |
船身及上部結構振動的測量、報告和評價指南 |
|
| ANSI S2.27-2002 |
機械振動.船驅動時機械振動測量和評定用導則 |
(Mechanical Vibration - Guidelines for the Measurement and Evaluation of Ship Propulsion Machinery Vibration ) |
| ANSI S2.3-1964 |
電子設備用強烈碰撞沖擊機的規范 |
High-Impact Shock Machine for Electronic Devices |
| ANSI S2.31-1979 |
力導納的實驗測量法:第1部分:基本定義和傳感器 |
Methods for the experimental determination of mechanical mobility - Part 1: Basic definitions and transducers |
| ANSI S2.32-1982 |
力導納的實驗測定法:第2部分:使用單點直線激發的測量 |
Methods for the experimental determination of mechanical mobility - Part 2: Measurements using single-point translational excitation |
| ANSI S2.34-1984 |
旋轉導納性能和完全導納基體的實驗測定指南 |
Guide to the experimental determination of rotational mobility properties and the complete mobility matrix |
| ANSI S2.38-1982 |
現場平衡設備的描述和評定 |
Field balancig equipment - Description and evaluation |
| ANSI S2.4-1976 |
沖擊和振動測量用輔助模擬設備特性的規定方法 |
Method for specifying the characteristics of auxiliary analog equipment for shock and vibration measurements |
| ANSI S2.40-1984 |
旋轉式和往復式機械的振動強度測量?jī)x器的要求 |
Mechanical vibration of rotating and reciprocating machinery - Requirements for measuring vibration severity |
| ANSI S2.41-1985 |
速度范圍為10至200轉/秒的大型旋轉機器的機械振動強度的現場測量和評定 |
Mechanical vibration of large rotating machines with speed range from 10 to 200 rev/s - Measurement and evaluation of vibration severity in situ |
| ANSI S2.42-1982 |
平衡撓性轉子的程序 |
Procedures for balancing flexible rotors |
| ANSI S2.43-1984 |
評定撓性轉子平衡的準則 |
Criteria for evaluating flexible rotor balance |
| ANSI S2.45-1983 |
描述產生振動用電動測試設備特性的方法 |
Electrodynamic test equipment for generating vibration - Methods of describing equipment characteristics |
| ANSI S2.46-1989 |
地震傳感器規定的特性 |
Characteristics to be specified for seismic transducers |
| ANSI S2.47-1990 |
評估振動對建筑物產生的結果及測量振動的方法 |
Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings |
| ANSI S2.48-1993 |
描述產生振動用伺服液壓試驗設備特性的方法 |
Servo-hydraulic test equipment for generating vibration - Methods of describing characteristics |
| ANSI S2.5-1962 |
規定振動機性能的推薦標準 |
Recommendations for Specifying the Performance of Vibration Machines |
| ANSI S2.58-1983 |
描述振動發生器用輔助工作臺特性的方法 |
Auxiliary tables for vibration generators - Method of describing equipment characteristics |
| ANSI S2.60-1987 |
平衡機的外殼和其他安全指南 |
Balancing machines - Enclosures and other safety measures |
| ANSI S2.61-1989 |
加速器機械安裝指南 |
Guide to the mechanical mounting of accelerometers |
| ANSI S2.7-1982 |
平衡術語集 |
Balancing terminology |
| ANSI S2.8-1972 |
描述彈性支座特性的指南 |
Guide for Describing the Characteristics of Resilient Mountings |
| ANSI S2.9-1976 |
確定材料阻尼特性的專用名詞 |
Nomenclature for specifying damping properties of materials |
| ANSI S3.13-1987 |
骨質振動測量?jī)x的機械耦合器 |
Mechanical coupler for measurement of bone vibrators |
| ANSI S3.14-1977 |
關于語言干擾的評價噪聲 |
Rating noise with respect to speech interference |
| ANSI S3.18-1979 |
人體感受全身振動的評定指南 |
Guide for evaluation of human exposure to whole-body vibration |
| ANSI S3.18-2003 Part 4 ISO 2631-4-2001 |
機械振動和沖擊.人體處于全身振動的評價.第4部分:對固定導軌運輸系統中的乘客和乘務員的舒適性產生影響的振 |
(Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems ) |
| ANSI S3.2-1989 |
通信系統音頻清晰度的測量方法 |
Method for measuring the intelligibility of speech over communication systems |
| ANSI S3.20-1995 |
音質評價術語集 |
Bioacoustical terminology |
| ANSI S3.21-1978 |
人工純音閾值測聽的方法 |
Methods for manual pure-tone threshold audiometry |
| ANSI S3.21-2004 |
人工純音閾值測聽方法 |
|
| ANSI S3.22-1996 |
助聽器特性的規范 |
Specification of hearing aid characteristics |
| ANSI S3.22-2003 |
助聽器特性的規范 |
(Specification of Hearing Aid Characteristics ) |
| ANSI S3.25-1989 |
封閉式仿真耳 |
Occluded ear simulator |
| ANSI S3.29-1983 |
在建筑物中人體感受振動的評測指南 |
Guide to the evaluation of human exposure to vibration in buildings |
| ANSI S3.32-1982 |
影響人體的機械振動和沖擊的詞匯 |
Mechanical vibration and shock affecting man - Vocabulary |
| ANSI S3.34-1986 |
人體感受振動傳遞至手的測量和評定 |
Guide for the measurement and evaluation of human exposure to vibration transmitted to the hand |
| ANSI S3.35-1985 |
在模擬現場工作條件下助聽器性能特性的測量方法 |
Methods of measurement of performance characteristics of hearing aids under simulated in-situ working conditions |
| ANSI S3.36-1985 |
模擬現場空氣聲學測量用人體模型的規范 |
Specification for a manikin for simulated in-situ airbone acoustic measurements |
| ANSI S3.37-1987 |
優選的助聽器吊鉤波導出口螺紋 |
Preferred earhook nozzle thread for postauricular hearing aids |
| ANSI S3.39-1987 |
測量聽覺聲阻抗及導納(聽覺聲導抗)儀器規范 |
Specifications for instruments to measure aural acoustic impedance and admittance (aural acoustic immittance) |
| ANSI S3.4-1980 |
噪聲響度的計算程序 |
Procedure for the computation of loudness of noise |
| ANSI S3.40-2002 |
減振用防護手套的測量和評價指南 |
(Guide for the Measurement and Evaluation of Gloves which Are Used to Reduce Exposure to Vibration Transmitted to the Hand ) |
| ANSI S3.41-1990 |
安全緊急撤離音響信號 |
Audible emergency evacuation signal |
| ANSI S3.42-1992 |
助聽器寬帶音頻信號的測試 |
Testing hearing aids with a broad-band noise signal |
| ANSI S3.44-1996 |
職業引起的噪聲的測定及噪聲引起的聽覺損傷的評價 |
Determination of occupational noise exposure and estimation of noise-induced hearing impairment |
| ANSI S3.6-1996 |
聽度計的規范 |
Specification for audiometers |
| ANSI S3.6-2004 |
聽力計規范 |
|
| ANSI S3.7-1995 |
耳機耦合器的校準方法 |
Method for coupler calibration of earphones |
| ANSI S4.26-1984 |
用于專業性聲頻和聲增強的揚聲器件 |
Specification of loudspeaker components used in professional audio and sound reinforcement |
| ANSI S4.28-1984 |
應用脈沖代碼調制的專業數字聲頻用優選采樣頻率 |
Professional digital audio applications employing pulse-code modulation - Preferred sampling frequencies |
| ANSI S4.3-1982 |
錄音和放聲設備的加權峰值高頻顫動的測量方法 |
Method for measurement of weighted peak flutter of sound recording and reproducing equipment |
| ANSI S4.30-1992 |
聲頻工程中擴音器喇叭最低共振頻率測量的試驗方法 |
Standard test method for audio engineering - Measurement of the lowest resonance frequency of loudspeaker cones |
| ANSI S4.40-1992 |
數字聲頻工程中兩通道線性顯示數字聲頻數據用順序傳輸格式的推薦作法 |
Digital audio engineering - Serial transmission format for two-channel linearly represented digital audio data |
| ANSI S4.44-1991 |
數字聲頻工程在演播工作中的數字聲頻儀器同步錄音的AES推薦作法 |
Digital audio engineering - Synchronization of digital audio equipment in studio operations |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com