標準號 |
中文名稱 |
英文名稱 |
| ANSI/IPC 2578-2001 |
材料和產品設計結構數據清單供應鏈通信系統的分要求.產品數據交換 |
Sectional Requirements for Supply Chain Communication of Bill of Material and Product Design Configuration Data - Product Data eXchange |
| ANSI/IPC 2581-2004 |
制造描述數據和轉換方法的印制板裝配產品的一般要求 |
|
| ANSI/IPC 4101A-2002 |
硬質多層印制電路板基底材料的規范 |
(Specification for Base Materials for Rigid and Multilayer Printed Boards ) |
| ANSI/IPC 4101AAMD 1-2002 |
硬性和多層印制電路板的基底材料規范 |
(Specification for Base Materials for Rigid and Multi-layer Printed Boards ) |
| ANSI/IPC 4110-1998 |
確定印制板用非織物多孔板特性的方法和規范 |
Specification and Characterization Methods for Nonwoven Cellulose Based Paper for Printed Boards |
| ANSI/IPC 4121-1999 |
多層印制線路板的選擇芯結構指南 |
Guidelines for Selecting Core Constructions for Multilayer Printed Wiring Boards |
| ANSI/IPC 4202-2002 |
柔性印制線路用柔性裸絕緣材料 |
(Flexible Bare Dielectrics for Use in Flexible Printed Wiring ) |
| ANSI/IPC 4203-2002 |
作柔性印制線路和柔性粘合膜片覆蓋層用的涂覆粘合劑的絕緣膜 |
(Adhesive coated Dielectric Films for Use as Cover Sheets for Flexible Printed Wiring and Flexible Adhesive Bonding Films ) |
| ANSI/IPC 4204-2002 |
制備柔性印制線路用的柔性金屬包覆的絕緣材料 |
(Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Wiring ) |
| ANSI/IPC 4411-1999 |
非織物增強的測定特性的方法和規范 |
Specification and Characterization Methods for Nonwoven Para-Aramid Reinforcement |
| ANSI/IPC 4412-2002 |
印制電路板用“E“級成品編織物規范 |
(Specification for Finished Fabric Woven from “E“ Glass for Printed Boards ) |
| ANSI/IPC 4552-2002 |
印制電路板用無電鎳/浸金(EMIG) 印紋規范 |
(Specification for Electroless Nickel/Immersion Gold (EMIG) Plating for Printed Circuit Boards ) |
| ANSI/IPC 4553-2005 |
印制電路板用浸銀電鍍規范 |
|
| ANSI/IPC 6016-1999 |
高密度互連層或板的性能規范和質量 |
Qualification and Performance Specification for High Density Interconnect (HDI) Layers or Boards |
| ANSI/IPC 6018A-2002 |
微波終端產品電路板監測和試驗 |
(Microwave End Product Board Inspection and Test ) |
| ANSI/IPC 7095-2000 |
BGAs用的設計和組件加工應用 |
Design and Assembly Process Implementation for BGAs |
| ANSI/IPC 7525-2000 |
模板設計指南 |
Stencil Design Guidelines |
| ANSI/IPC 7912A-2004 |
印制電路板組件的末端裝置DPMO |
|
| ANSI/IPC 9504-1998 |
非IC常件的評價組件加工模擬 |
Assembly Process Simulation for Evaluation of Non-IC Components |
| ANSI/IPC 9701-2002 |
表面安裝焊料附件的合格和性能試驗方法 |
(Qualification and Performance Test Methods for Surface Mount Solder Attachments ) |
| ANSI/IPC 9850-2002 |
表面安裝設備特性描述 |
(Surface Mount Equipment Characterization ) |
| ANSI/IPC A-22-1991 |
保險商實驗室標準UL796和UL746試驗?zāi)Ｐ凸に嚭驮嚇又苽?/td>
| Test Pattern Artwork and Sample Preparation for Underwriters Laboratories Standards UL 796 and UL 746 |
| ANSI/IPC A-600E-1996 |
印制板的可接受性 |
Acceptability of Printed Boards |
| ANSI/IPC A-610B-1995 |
印制板組件的合格條件 |
Acceptability of Printed Board Assemblies |
| ANSI/IPC A-610D-2005 |
印刷板組件的合格判定 |
|
| ANSI/IPC AC-62-1986 |
接地端子焊料水清洗指南 |
Post Solder Aqueous Cleaning Handbook |
| ANSI/IPC BP-421-1981 |
帶有壓配合觸點的硬印制底板 |
Backplanes with Press-Fit Contacts, Rigid Printed Board |
| ANSI/IPC CC-830-1984 |
印制板組件的電絕緣化合物的合格條件和性能 |
Electrical Insulating Compound for Printing Board Assemblies, Qualifications and Performance of |
| ANSI/IPC CC-830B-2002 |
印制板組件的電絕緣化合物的合格條件和一致性 |
(Electrical Insulating Compound for Printing Board Assemblies, Qualifications and Performance of ) |
| ANSI/IPC CF-148-1990 |
印制線路板用樹脂覆層金屬 |
Resin-Coated Metal for Printed Boards |
| ANSI/IPC CF-150E-1981 |
印制線路用銅箔的規范 |
Copper Foil for Printed Wiring Applications, Specification for |
| ANSI/IPC CH-65-1991 |
印制電路板的清洗導則 |
Guidelines for Cleaning of Printed Boards |
| ANSI/IPC CM-770C-1987 |
印制板件安裝指南 |
Printed Board Component Mounting, Guidelines for |
| ANSI/IPC D-310C-1990 |
圖模制作和測量技術導則 |
Guidelines for Phototool Generation and Measurement Techniques |
| ANSI/IPC D-317-1990 |
高速電子技術封裝設計導則 |
Design Guidelines for Electronic Packaging Utilizing High-Speed Techniques |
| ANSI/IPC D-322-1984 |
用標準板面尺寸選擇印制線路板尺寸的導則 |
Selecting Printed Wiring Board Sizes Using Standard Panel Sizes, Guidelines for |
| ANSI/IPC D-325A-1995 |
印制電路板、組件和配套圖形的文件編制要求 |
Documentation Requirements for Printed Boards, Assemblies and Support Drawings |
| ANSI/IPC D-326-1991 |
生產印制電路板組件的信息要求 |
Information Requirements for Manufacturing Printed Board Assemblies |
| ANSI/IPC D-356-1992 |
數字形式裸板電氣測試信息 |
Bare Board Electrical Test Information in Digital Form |
| ANSI/IPC D-859-1990 |
厚膜多層混合電路設計標準 |
Design Standard for Thick Film Multilayer Hybrid Circuits |
| ANSI/IPC DW-425A-1990 |
分立線路板的設計及最終產品要求 |
Wiring Boards, Design and End-Product Requirements for Discrete |
| ANSI/IPC FC-241C-1992 |
制造撓性印制線路用的覆金屬的撓性電介質規范 |
Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Wiring |
| ANSI/IPC FC-250A-1987 |
單面和雙面撓性印制線路規范 |
Specification for Single- and Double-Sided Flexible Printed Wiring |
| ANSI/IPC HDBK-610-2002 |
IPC-A-610的手冊和指南(包括IPC-A-610B和C的比較) |
(Handbook and Guide to IPC-A-610 (Includes IPC-A-610B and C Comparison) ) |
| ANSI/IPC HF-318A-1991 |
微波終端產品寬頻帶檢驗及試驗 |
Microwave End Product Board Inspection and Test |
| ANSI/IPC J-STD-001D-2005 |
焊接的電氣和電子組件的要求 |
|
| ANSI/IPC J-STD-004A-2004 |
助焊劑的要求 |
|
| ANSI/IPC MB-380-1990 |
模制互連裝置指南 |
Guidelines for Molded Interconnection Devices |
| ANSI/IPC PC-90-1990 |
統計過程控制實施的一般要求 |
General Requirements for Implementation of Statistical Process Control |
| ANSI/IPC PC-90/1-1993 |
審查樣板 |
Audit Templates |
| ANSI/IPC QF-143-1992 |
印制電路板用石英(純凈熔融硅石)絲織成的成品纖維規范 |
Finished Fabric Woven from Quartz (Pure Fused Silical) for Printed Boards, Specification for |
| ANSI/IPC RF-245-1987 |
剛性彎曲印制電路板性能規范 |
Rigid-Flex Printed Boards, Performance Specification for |
| ANSI/IPC S-815B-1987 |
釬焊電子互連件的一般要求 |
Soldering Electronic Interconnections, General Requirements for |
| ANSI/IPC SC-60A-1999 |
軟釬焊焊劑清潔手冊 |
Post Solder Solvent Cleaning Handbook |
| ANSI/IPC SG-141-1992 |
用S玻璃絲編的印制電路板用成品玻璃絲 |
Finished Fabric Woven from S Glass for Printed Boards |
| ANSI/IPC SM-782-1987 |
印制電路板表面安裝接點形式(配置和設計規則) |
Printed Circuits - Surface Mount Land Patterns (Configurations and Design Rules) |
| ANSI/IPC SM-784-1990 |
電路板上芯片技術實施導則 |
Guidelines for Chip-on Board Technology Implementation |
| ANSI/IPC SM-785-1993 |
表面安裝焊接件加速可靠測試 |
Accelerated Reliability Testing of Surface Mount Solder Attachments |
| ANSI/IPC SM-840C Amendment 1-2000 |
永久焊接罩的性能和質量要求 |
Qualification and Performance of Permanent Solder Mask |
| ANSI/IPC T-50E-1992 |
電子線路互連及封裝的術語和定義 |
Terms and Definitions for Interconnecting and Packaging Electronic Circuits |
| ANSI/IPC WHMA-A-620-2002 |
電纜和導線系列組件的要求和驗收 |
(Requirements and Acceptance for Cable and Wire Harness Asssemblies ) |
| ANSI/IPC/EIA J-STD-001C-2000 |
釬焊電氣和電子組件的要求 |
Requirements for Soldered Electrical and Electronic Assemblies |
| ANSI/IPC/EIA J-STD-002B-2003 |
件引線、終端、接線片和電線的可釬焊性試驗 |
(Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires ) |
| ANSI/IPC/EIA J-STD-006A, AM1-2002 |
電子釬焊用電子級釬料合金及助熔和不助熔固體釬料的要求 |
Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications |
| ANSI/IPC/EIA J-STD-006A-2002 |
電子釬焊用電子級釬料合金及助熔和不助熔固體釬料的要求 |
(Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications ) |
| ANSI/IPC/JEDEC J-STD-020B-2002 |
遠程通信.濕敏件的分類 |
(Telecommunications - Classification of Moisture Sensitive Components ) |
| ANSI/IPC/JEDEC J-STD-033A-2002 |
對潮氣/回流敏感的表面安裝器械的搬運、包裝、船運和使用 |
(Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices ) |
| ANSI/IPC/JPCA 4104-1999 |
高密度互連材料規范 |
Specification for High Density Interconnect (HDI) and Mcrovia Materials |
| ANSI/ISA 12.00.01-2002 |
在I級0、1或2區危險位置上用的電氣設備:一般要求 |
(Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements ) |
| ANSI/ISA 12.00.01-2005 |
在I級0和1區危險場所用的電氣設備.一般要求 |
|
| ANSI/ISA 12.02.01-2002 |
I級0,1,&2危險區使用的電氣設備.內在防爆安全“i“ |
(Electrical Apparatus for Use in Class I, Zones 0, 1, & 2 Hazardous (Classified) Locations - Intrinsic Safety “i“ ) |
| ANSI/ISA 12.10.05-2004 |
20,21和22危險區域(已劃分的)中使用的電氣裝置.20,21和22危險區域的分類 |
|
| ANSI/ISA 12.12.02-2003 |
I級2區危險場所用電氣設備.“n“型防護電氣設備 |
(Electrical Apparatus for Use in Class I Zone 2 Hazardous (Classified) Locations - Type of Protection “n“ ) |
| ANSI/ISA 12.13.01-2000 |
性能要求,燃燒氣體檢測器 |
Performance Requirements, Combustible Gas Detectors |
| ANSI/ISA 12.13.01-2002 |
燃燒氣體檢測器的性能要求 |
(Performance Requirements, Combustible Gas Detectors ) |
| ANSI/ISA 12.16.01(IEC 60079-7)-2002 |
I類1型地帶災害地址設置用電子設備:增加安全性“e“的防護類型 |
(Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety “e“ ) |
| ANSI/ISA 12.16.01-2002 |
I級1危險區使用的電氣設備.防護類型:增安型“e“ |
(Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety “e“ ) |
| ANSI/ISA 12.27.01-2002 |
電系統和易燃加工流體間加工密封要求 |
(Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids ) |
| ANSI/ISA 60079-1(12.22.01)-2005 |
等級I、危險區域1(已分級)場所用電氣器具:保護類型.阻燃d型 |
|
| ANSI/ISA 60079-18(12.23.01)-2005 |
等級I、危險區域1(已分級)場所用電氣器具:保護類型.密封m型 |
|
| ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 |
測量、控制和實驗室用電氣設備的安全要求.第1部分:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01) 2004, Annex DV US-2005 |
測量、控制和實驗室用電氣設備的安全要求.第1部分:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01), CSA-C 22.2, No. 1010-1, UL-61010-1-2004 |
電氣和電子試驗、測量、控制和相關設備:一般要求 |
|
| ANSI/ISA 61010-1(82.02.01)-2004 |
電力和電子試驗、測量、控制和相關設備:一般要求 |
|
| ANSI/ISA 67.06.01-2002 |
在核發電廠中有關和儀器頻道安全的性能監測 |
(Performance Monitoring for Nuclear Safety-Related Instrument Channels in Nuclear Power Plants ) |
| ANSI/ISA 75.01.01-2002 |
尺寸控制閥用流量方程式 |
(Flow Equations for Sizing Control Valves ) |
| ANSI/ISA 75.08.01-2002 |
整體式帶凸緣的球型控制閥體的面對面尺寸(類型125、150、250、300和600) |
(Face-to-Face Dimensions for Integral Flanged Globe-Style Control Valve Bodies (Classes 125, 150, 250, 300, and 600) ) |
| ANSI/ISA 75.08.02-2003 |
無凸緣的控制閥端面間的尺寸(級別150、300和600) |
(Face-to-Face Dimensions for Flangeless Control Valves (Classes 150, 300, and 600) ) |
| ANSI/ISA 75.08.05-2002 |
端頭對焊球型控制閥的面對面尺寸(類型150、300、600、900、1500和2500) |
(Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500) ) |
| ANSI/ISA 75.08.06-2002 |
帶凸緣的球型控制閥體的面對面尺寸(類型900、1500和2500) |
(Face-to-Face Dimensions for Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and 2500) ) |
| ANSI/ISA 75.08.09-2005 |
滑動桿無凸緣控制閥的端面間尺寸(類型150、300和600) |
|
| ANSI/ISA 76.00.02-2002 |
表面安裝流體分配件用模塊化件.第1部分:合成橡膠密封件 |
(Modular Component Interfaces for Surface-Mount Fluid Distribution Components--Part 1: Elastomeric Seals ) |
| ANSI/ISA 77.20-2005 |
礦物燃料發電廠模擬器.功能要求 |
|
| ANSI/ISA 77.41.01-2005 |
礦物燃料發電廠鍋爐燃燒控制裝置 |
|
| ANSI/ISA 77.44.02-2001 |
化石燃料動力工廠蒸氣溫度控制系統.一體型 |
Fossil Fuel Power Plant Steam Temperature Control System - Once-Through Type |
| ANSI/ISA 77.70-2005 |
礦物燃料發電廠設備管道安裝 |
|
| ANSI/ISA 84.00.01Part 1-2004 |
功能安全.加工工業部門的安全儀表測量系統.第1部分:框架、定義、系統、硬件和軟件要求 |
|
| ANSI/ISA 84.00.01Part 2-2004 |
功能安全.加工工業部門的安全儀表測量系統.第2部分:應用指南.信息 |
|
| ANSI/ISA 84.00.01Part 3-2004 |
功能安全.加工工業部門的安全儀表化系統.第3部分:所要求的安全完整性等級的測定指南.信息化 |
|
| ANSI/ISA 88.00.03-2003 |
按批控制.第3部分:總的生產模式和現場生產模式以及表示法 |
(Batch Control Part 3: General and Site Recipe Models and Representation ) |
| ANSI/ISA 95.00.01-2000 |
企業整體控制集成.第1部分:模型和術語 |
Enterprise-Control System Integration, Part 1: Models and Terminology |
| ANSI/ISA 95.00.02-2001 |
企業控制系統一體化.第2部分:對象模型屬性 |
Enterprise-Control System Integration - Part 2: Object Model Attributes |
| ANSI/ISA 98.00.01-2002 |
控制系統技術員的資格和認證 |
(Qualifications and Certification of Control System Technicians ) |
| ANSI/ISA RP 12.15 Part II-1990 |
硫化氫檢測工具的安裝、操作和維修 |
Installation, Operation, and Maintenance of Hydrogen Sulfide Detection Instruments |
| ANSI/ISA RP 12.6-1995 |
危險場所的布線實施規程.工具.第I部分:內部安全 |
Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety |
| ANSI/ISA RP12.13.02-2002 |
可燃氣體檢測裝置的安裝、運行和維護推薦實施規程 |
(Recommended Practice for the Installation, Operation, and Maintenance of Combustible Gas Detection Instruments ) |
| ANSI/ISA S 12.01.01-1999 |
危險地點電氣裝置的信息和定義 |
Definitions and Information Pertaining to Electrical Apparatus in Hazardous (Classified) Locations |
| ANSI/ISA S 12.06.01-1995 |
危險(分級)地區的布線規程.設備.第I部分: 內在安全性 |
Wiring Practices for Hazardous (Classified) Locations - Instrumentation - Part I: Intrinsic Safety |
| ANSI/ISA S 12.12-1994 |
I、II級、2區和III級、1、2區危險場所用不易燃電氣設備 |
Nonincendive Electrical Equipment for Use in Class I and II, Division 2, and Class III, Divisions 1 and 2, Hazardous (Classified) Locations |
| ANSI/ISA S 12.22.01-2001 |
I級1區危險地帶使用的電驅動裝置:防護型.防火d |
Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Flameproof d |
| ANSI/ISA S 5.4-1991 |
測量環路圖示 |
Instrument Loop Diagrams |
| ANSI/ISA S 50.02 Part 2-1992 |
工業控制系統用字段總線標準.第2部分:物理層規范和服務定義 |
Fieldbus Standard for Use in Industrial Control Systems Part 2: Physical Layer Specification and Service Definition |
| ANSI/ISA S 67.04 Part 1-1994 |
核安全相關儀器的設置點 |
Setpoints for Nuclear Safety-Related Instrumentation |
| ANSI/ISA S 67.10-1994 |
核電站中使用的抽樣線管道標準 |
Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants |
| ANSI/ISA S 67.14-1994 |
核設施中測量和控制技術的鑒定和認證 |
Qualifications and Certification of Instrumentation and Control Technicians in Nuclear Facilities |
| ANSI/ISA S 7.0.01-1996 |
測量氣體的質量標準 |
Quality Standard for Instrument Air |
| ANSI/ISA S 71.03-1995 |
工藝測量和控制用環境條件:機械的影響 |
Environmental Conditions for Process Measurements and Control: Mechanical Influences |
| ANSI/ISA S 75.08.03-2001 |
承插焊接端頭和螺旋端頭球狀控制閥的面到面尺寸 |
Face-to-Face Dimensions for Socket Weld-End and Screwed-End Globe-Style Control Valves (ANSI Classes 150, 300, 600, 900, 1500, and 2500) |
| ANSI/ISA S 75.08.04-2001 |
對焊端頭球狀控制閥的面到面尺寸 |
Face-to-Face Dimensions for Buttweld-End Globe-Style Control Valves |
| ANSI/ISA S 75.08.07-2001 |
獨立法蘭球狀控制閥的面到面尺寸 |
Face-to-Face Dimensions for Separable Flanged Globe-Style Control Valves (Classes 150, 300, and 600) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com