標準號 |
中文名稱 |
英文名稱 |
| ANSI/AHAM DW-1-1992 |
家用洗碟機標準 |
Household Electric Dishwasher Standard |
| ANSI/AHAM ER-1-1986 |
家用電氣爐灶 |
Household Electric Ranges |
| ANSI/AHAM FWD-1-1983 |
家用廢棄物食物處理器性能測定程序 |
Household Food Waste Disposers, Performance Evaluation Procedure for |
| ANSI/AHAM HLD-1-1991 |
家用滾筒式衣服干燥機性能評定方法 |
Performance Evaluation Procedure for Household Tumble Type Clothes Dryers |
| ANSI/AHAM HLW-1-2002 |
家用洗衣機性能評定方法 |
(Performance Evaluation Procedure for Household Washers ) |
| ANSI/AHAM HRF-1-2002 |
家用電冰箱/家用制冷機 |
(Household Refrigerators/Household Freezers ) |
| ANSI/AHAM HRF-1-2004 |
家用電冰箱/家用制冷機 |
|
| ANSI/AHAM I-1-2005 |
手持式電熨斗 |
|
| ANSI/AHAM RAC-1-1982 |
房間空氣調節器 |
Room Air Conditioners |
| ANSI/AHAM TC-1-1984 |
家用垃圾壓實機性能評定方法 |
Performance Evaluation Procedure for Household Trash Compactors |
| ANSI/AIAA G-003A-1996 |
標準大氣模型的參考指南 |
Guide to Reference and Standard Atmosphere Models |
| ANSI/AIAA G-020-1992 |
航天器重量和動力意外事故的估計和預算指南 |
Guide for Estimating and Budgeting Weight and Power Contingencies for Spacecraft Systems |
| ANSI/AIAA G-031-1992 |
根據采用DoD-Std-2167A的系統知識的更新周期方法 |
Life Cycle Development of Knowledge Based Systems using DoD-Std 2167A |
| ANSI/AIAA G-034-1999 |
標準離子層模型的參考指南 |
Guide to Reference and Standard Ionosphere Models |
| ANSI/AIAA G-035A-2000 |
人性能測量 |
Human Performance Measurements |
| ANSI/AIAA G-043-1992 |
操作原理的文檔準備指南 |
Guide for the Preparation of Operational Concept Documents |
| ANSI/AIAA G-057-1994 |
空間發射系統術語指南 |
Guide to Terminology for Space Launch Systems |
| ANSI/AIAA R-004-1992 |
航空與航天飛行器協調系統的推薦規程 |
Recommended Practice for Atmospheric and Space Flight Vehicle Coordinate Systems |
| ANSI/AIAA R-013-1992 |
軟件可靠性 |
Software Reliability |
| ANSI/AIAA R-023A-1995 |
個人計算機對空間系統操作的接口的推薦實施規程 |
Recommended Practice for Human Computer Interfaces for Space System Operations |
| ANSI/AIAA R-024-1993 |
空間操作和支持文件編制 |
Space Operations and Support Documentation |
| ANSI/AIAA R-100A-2001 |
部件管理的推薦操作規程 |
Recommended Practice for Parts Management |
| ANSI/AIAA S-001-1991 |
航天結構的標準術語 |
Standard Terminology for Space Structures |
| ANSI/AIAA S-017-1991 |
氣動減速器和降落傘圖 |
Aerodynamic Decelerator and Parachute Drawings |
| ANSI/AIAA S-061-1998 |
商用發射安全 |
Commercial Launch Safety |
| ANSI/AIHA Z 9.2-2001 |
本地排氣系統的操作設計控制基礎 |
Design and Operation of Local Exhaust Systems, Fundamentals Governing the |
| ANSI/AIHA Z 9.3-1994 |
噴涂完成操作.設計,結構和通風的安全編碼 |
Spray Finishing Operations - Safety Code for Design, Construction, and Ventilation |
| ANSI/AIHA Z 9.4-1997 |
排氣系統.磨料送風操作.固定位置封閉的安全操作規程和通風 |
Exhaust Systems - Abrasive Blasting Operations - Ventilation and Safe Practices for Fixed Location Enclosures |
| ANSI/AIHA Z 9.5-1992 |
實驗室通風 |
Laboratory Ventilation |
| ANSI/AIHA Z 9.6-1999 |
磨削、拋光和磨擦用排氣系統 |
Exhaust Systems for Grinding, Polishing and Buffing |
| ANSI/AIHA Z 9.7-1998 |
工業加工排放系統中出來的空氣的重新回收 |
Recirculation of Air from Industrial Process Exhaust Systems |
| ANSI/AIHA Z10-2005 |
職業衛生和安全管理系統 |
|
| ANSI/AIHA Z9.5-2002 |
實驗室通風 |
(Laboratory Ventilation ) |
| ANSI/AIIM MS 1-1996 |
字母數字的計算機輸出縮微膠片的推薦操作規程.檢驗和質量控制的操作規程 |
Recommended Practice for Alphanumeric Computer-Output Microforms - Operational Practices for Inspection and Quality Control |
| ANSI/AIIM MS 10-1987 |
整個縮微膠片傳送器的縫隙膠粘劑的保護片的粘性 |
Adhesion of Protection Sheet to Aperture Adhesive of Unitized Microfilm Carrier (Aperture Card), Method for Determining |
| ANSI/AIIM MS 11-1987 |
圖像管理的信息.縮微膠片盒 |
Information and Image Management - Microfilm Jackets |
| ANSI/AIIM MS 111-1994 |
顯微制圖技術.在35mm卷軸膠片上縮微印制報紙的標準推薦實施規程. |
Micrographics - Standard Recommended Practice for Microfilming Printed Newspapers on 35mm Roll Microfilm |
| ANSI/AIIM MS 14-1996 |
16mm和35mm卷軸膠片規范 |
Specifications for 16mm and 35mm Roll Microfilm |
| ANSI/AIIM MS 15-1990 |
16mm加工膠片的單芯盒操作限制和尺寸 |
Dimensions and Operational Constraints for Single-Core Cartridge for 16-mm Processed Microfilm |
| ANSI/AIIM MS 17-1992 |
旋轉縮微膠片攝象機的試驗圖 |
Test Chart for Rotary Microfilm Cameras |
| ANSI/AIIM MS 18-1992 |
縮微攝影術.圖像膠片的拼接.尺寸和操作限制 |
Micrographics - Splices for Imaged Film - Dimensions and Operational Constraints |
| ANSI/AIIM MS 19-1993 |
縮微版本的識別推薦規程 |
Identification of Microforms, Recommended Practice for |
| ANSI/AIIM MS 23-1998 |
文件的縮微膠片,操作過程,首先產生的銀膠質量控制和檢驗 |
Microfilm of Documents, Operational Procedures/Inspection and Quality Control of First-Generation Silver-Gelatin |
| ANSI/AIIM MS 24-1996 |
用于在35mm縮微膠片上縮微記錄工程制圖的試驗?zāi)繕?biāo) |
Test Target for Use in Microrecording Engineering Graphics on 35-mm Microfilm |
| ANSI/AIIM MS 26-1990 |
35mm行星攝相機(頂燈形)縮微膠片工程繪圖亮度統一性測定規程 |
35-mm Planetary Cameras (Top-Light) - Procedures for Determining Illumination Uniformity of Microfilming Engineering Drawings |
| ANSI/AIIM MS 28-1983 |
顯微制圖學.字母數字COM質量試驗幻燈片 |
Micrographics - Alphanumeric COM Quality Test Slide |
| ANSI/AIIM MS 29-1992 |
顯微制圖學.顯微膠片記錄設備的芯和軸 |
Micrographics - Cores and Spools for Microfilm Recording Equipment - Dimensions |
| ANSI/AIIM MS 32-1996 |
35mm縮微膠片上工程源文件的顯微記錄 |
Microrecording of Engineering Source Documents on 35-mm Microfilm |
| ANSI/AIIM MS 34-1990 |
16mm和35mm縮微膠片上使用的卷軸尺寸 |
Dimensions for Reels Used for 16-mm and 35-mm Microfilm |
| ANSI/AIIM MS 37-1988 |
地圖材料的縮微攝影技術的推薦實施規程 |
Recommended Practice for Microphotography of Cartographic Materials |
| ANSI/AIIM MS 37a-1996 |
地圖材料的縮微攝影技術的推薦實施規程 |
Recommended Practice for Microphotography of Cartographic Materials |
| ANSI/AIIM MS 38-1995 |
工程制圖的縮微記錄的推薦實施規程.計算機輸出縮微膠片 |
Recommended Practice for the Microrecording of Engineering Graphics - Computer-Output Microfilm |
| ANSI/AIIM MS 4-1987 |
在縮微制圖中流程圖符號及其使用 |
Flowchart Symbols and Their Use in Micrographics |
| ANSI/AIIM MS 40-1987 |
縮微膠片.計算機輔助檢索(CAR)接口命令 |
Microfilm - Computer Assisted Retrieval (CAR) Interface Commands |
| ANSI/AIIM MS 41-1996 |
整體縮微膠片承載器(孔隙,攝相機,拷貝和圖像卡片) |
Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards) |
| ANSI/AIIM MS 42-1989 |
信息和圖像管理.縮微版本上記錄的抹去,刪除,改正或增加 |
Information and Image Management - Recommended Practice for the Expungement, Deletion, Correction, or Amendment of Records on Microforms |
| ANSI/AIIM MS 43-1988 |
由文件或由COM復制的質量控制和檢驗的推薦實施規程 |
Recommended Practice for Operational Procedures/Inspection and Quality Control of Duplicate Microforms of Documents and from COM |
| ANSI/AIIM MS 43a-1991 |
由文件或由COM復制的質量控制和檢驗的推薦實施規程增補 |
Addendum to Recommended Practice for Operational Procedures/Inspection and Quality Control of Duplicate Microforms of Documents and from COM |
| ANSI/AIIM MS 44-1988 |
圖像掃描器的質量控制的推薦實施規程 |
Recommended Practice for Quality Control of Image Scanners |
| ANSI/AIIM MS 46-1996 |
35mm重氮縮微膠片孔隙卡片復制的試驗規程 |
Test Procedures for Duplicating 35-mm Diazo Microfilm Aperture Cards |
| ANSI/AIIM MS 48-1990 |
鹵化銀膠片上縮微公共記錄的推薦實施規程 |
Recommended Practice for Microfilming Public Records on Silver-Halide Film |
| ANSI/AIIM MS 49-1993 |
縮微膠片和縮微掃描器的監測質量的推薦實施規程 |
Recommended Practice for Monitoring Quality of Roll Microfilm and Microfiche Scanners |
| ANSI/AIIM MS 5-1992 |
縮微制圖的縮微平片 |
Micrographic Microfiche |
| ANSI/AIIM MS 50-1994 |
信息和圖像管理標準.標準推薦實施規程.孔隙卡膠片圖像掃描器的監測圖像質量 |
Standard for Information and Image Management - Standard Recommended Practice - Monitoring Image Quality of Apperture Card Film Image Scanners |
| ANSI/AIIM MS 52-1991 |
用于光學掃描的源文件的要求和特性的推薦實施規程 |
Requirements and Characteristics of Original Documents Intended for Optical Scanning, Recommended Practice for the |
| ANSI/AIIM MS 53-1993 |
圖像交換和使用的文件格式.雙水平圖像文件格式:第1部分 |
File Format for Storage and Exchange of Images - Bi-Level Image File Format: Part 1 |
| ANSI/AIIM MS 54-1993 |
文件圖像設備上控制的圖形符號 |
Graphic Symbols for Controls on Document Imaging Equipment |
| ANSI/AIIM MS 55-1994 |
圖像管理的信息.在電子圖形管理環境下圖像自動處理用頁檢索和識別的標準推薦規程 |
Information and Image Management - Standard Recommended Practice for Identification and Indexing of Page Components (Zones) for Automated Processing in an Electronic Image Management (EIM) Environment |
| ANSI/AIIM MS 58-1996 |
掃描機用的小計算機接口應用的標準推薦實施規程 |
Standard Recommended Practice for Implementation of Small Computer Systems Interface (SCSI-2), (X3.131.1994) for Scanners |
| ANSI/AIIM MS 59-1996 |
在光學數字?jǐn)?shù)據盤上存儲信息驗證的媒體出錯監測和報告技術的標準推薦實施規程 |
Standard Recommended Practice for Media Error Monitoring and Reporting Techniques for Verification of the Information Stored in Optical Digital Data Disks |
| ANSI/AIIM MS 6-1993 |
縮微膠片包裝標簽 |
Microfilm Packaging Labeling |
| ANSI/AIIM MS 60-1996 |
信息和圖像管理.標準.電子折疊交換數據流 |
Information and Image Management - Standard - Electronic Folder Interchange Datastream |
| ANSI/AIIM MS 61-1996 |
文件圖像系統中掃描器的應用程序接口 |
Application Programming Interface (API) for Scanners in Document Imaging Systems |
| ANSI/AIIM MS 62-1999 |
具有內部電子形式發生系統的計算機輸出縮微膠片記錄系統的推薦實施規程.檢驗和質量控制的操作規程 |
Recommended Practice for COM Recording Systems Having an Internal Electronic Forms Generating System - Operational Practices for Inspection and Quality Control |
| ANSI/AIIM MS 8-1988 |
圖像標記檢索系統中的文件標記的使用 |
Document Mark (Blip) Used in Image Mark Retrieval Systems |
| ANSI/AIIM MS 9-1987 |
縮微膠片整體傳送器的安裝區域的厚度的測量方法 |
Thickness of Build-up Area on Unitized Microfilm Carriers (Aperture, Camera, Copy, and Image Cards), Method for Measuring |
| ANSI/AIIM MS 9a-1995 |
縮微膠片整體傳送器的安裝區域的厚度的測量方法 |
Method for Measuring Thickness of Buildup Area on Unitized Microfilm Carriers (Aperture, Camera, Copy and Image Cards) |
| ANSI/AIIM TR 1-1993 |
計量指南 |
Guidelines for Metrics (NOT AN AMERICAN NATIONAL STANDARD) |
| ANSI/AIM BC 1-1995 |
統一符號規范.編碼39 |
Uniform Symbology Specification - Code 39 |
| ANSI/AIM BC 2-1995 |
統一符號規范.5的2交錯 |
Uniform Symbology Specification - Interleaved 2-Of-5 |
| ANSI/AIM BC 3-1995 |
統一符號規范.條形碼 |
Uniform Symbology Specification - Codabar |
| ANSI/AIM BC 4-1995 |
統一符號規范.128編碼 |
Uniform Symbology Specification Code 128 |
| ANSI/AIM BC 5-1995 |
統一符號規范.93編碼 |
Uniform Symbology Specification Code 93 |
| ANSI/AIM BC 6-1995 |
統一符號規范.49編碼 |
Uniform Symbology Specification - Code 49 |
| ANSI/AIM BC 7-1995 |
統一符號規范.16K編碼 |
Uniform Symbology Specification - Code 16K |
| ANSI/AIM BC-10-1997 |
AIM國際技術規范.國際符號規范.最大編碼 |
AIM International Technical Specification - International Symbology Specification - MaxiCode |
| ANSI/AIM BC-11-1997 |
AIM國際技術規范.國際符號規范.數據矩陣 |
AIM International Technical Specification - International Symbology Specification - Data Matrix |
| ANSI/AIM BC-12-1998 |
統一符號規范.通道編碼 |
Uniform Symbology Specification - Channel Code |
| ANSI/AIM BC-13-1998 |
統一符號規范.Aztec編碼 |
International Symbology Specification - Aztec Code |
| ANSI/AISC 341-2002 |
鋼結構建筑物的有關地震條款 |
(Seismic Provisions for Structural Steel Buildings ) |
| ANSI/AISC 341-2005 |
結構鋼建筑物的有關地震條款 |
|
| ANSI/AISC 360-2005 |
結構鋼建筑物的規范 |
|
| ANSI/AISC N 690-1994 |
核設施與安全有關的鋼結構的設計,生產,建造規范 |
Design, Fabrication, and Erection of Steel Safety-Related Structures for Nuclear Facilities, Specification for the |
| ANSI/AISC N690 Supplement 1-2002 |
核設施用的與安全有關的鋼制結構的設計、建造和裝配規范 |
(Specification for the Design, Fabrication, and Erection of Steel Safety-Related Structures for Nuclear Facilities ) |
| ANSI/AISC N690-2004 |
核設施用與安全有關的鋼結構的設計、生產和建造規范 |
|
| ANSI/AISC N690-2004 |
核設施用與安全有關的鋼結構的設計、生產和建造規范 |
|
| ANSI/AISI CFSSPEC-1996 |
冷軋成型鋼部件的設計規范1996 |
1996 Specification for the Design of Cold-Formed Steel Structural Members |
| ANSI/AISI COFS/GP-2004 |
冷成型鋼結構.一般規定 |
|
| ANSI/AISI COFS/HEADER DESIGN-1a-2001 |
冷成型鋼架.橫梁的設計 |
Cold-Formed Steel Framing - Header Design |
| ANSI/AISI COFS/HEADER-2004 |
冷成型鋼結構.鍛造機設計 |
|
| ANSI/AISI COFS/L 99-1-2001 |
冷軋成型鋼框架.頂端設計 |
Cold-Formed Steel Framing - Header Design |
| ANSI/AISI COFS/LATERAL-2004 |
冷成形鋼框架構筑.側面設計 |
|
| ANSI/AISI COFS/PM-2001 |
冷成型鋼架.用于一兩戶家庭住所的慣用方法 |
Cold-Formed Steel Framing - Prescriptive Method for One and Two Family Dwellings |
| ANSI/AISI COFS/PMSupplement-2004 |
冷成形鋼框架構筑.單戶或兩戶住宅的規范方法.2001版(補充件) |
|
| ANSI/AISI COFS/TRUSS-2002 |
冷成型鋼架.桁架設計 |
Cold-Formed Steel Framing - Truss Design |
| ANSI/AISI COFS/TRUSS-2004 |
冷成型鋼結構.桁架設計 |
|
| ANSI/AISI COFS/WSD-2004 |
冷成形鋼框架構筑.壁柱設計 |
|
| ANSI/AISI/COS TS-6-2004 |
板式和錨式結構試驗標準程序 |
|
| ANSI/AISI/COS TS-8-2004 |
固定接縫屋頂系統承重檁條的基本試驗方法 |
|
| ANSI/AITC A 190.1-1992 |
木材產品.膠粘結構的層狀板 |
Wood Products - Structural Glued Laminated Timber |
| ANSI/AITC A190.1-2002 |
木材產品.膠粘結構的層狀板 |
(Wood Products - Structural Glued Laminated Timber ) |
| ANSI/ALI ALIS-2001 |
自動提升機.安裝和運行的安全要求 |
Automotive Lifts - Safety Requirements for Installation and Service |
| ANSI/ALI ALOIM-1994 |
自動電梯.操作安全要求,檢驗和維修 |
Automotive Lifts - Safety Requirements for Operation, Inspection and Maintenance |
| ANSI/ALI B 153.1-1990 |
自動升降機.安裝,保養和使用的安全要求 |
Automotive Lifts - Safety Requirements for the Construction, Care, and Use |
| ANSI/AMCA 204-1996 |
風扇的平衡質量和振動級別 |
Balance Quality and Vibration Levels for Fans |
| ANSI/AMCA 210-1985 |
風扇額定值的實驗測試方法 |
Laboratory Methods of Testing Fans for Rating (also designated ANSI/ASHRAE 51-1985) |
| ANSI/AMCA 240-1996 |
額定正壓通風機的實驗室測試方法 |
Laboratory Method of Testing Positive Pressure Ventilators for Rating |
| ANSI/AMCA 250-2005 |
測試噴氣式煙道風扇性能的實驗室方法 |
|
| ANSI/AMCA 330-1986 |
風扇導管內聲功率的實驗室測試程序 |
Laboratory Method of Testing In-Duct Sound Power Measurement Procedure for Fans (also designated ANSI/ASHRAE 68-1986) |
| ANSI/AMCA 510-2004 |
測定重負荷節氣閘的試驗方法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com