標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM F1741a-2002 |
排水溝和管道修復用機械螺旋纏繞聚氯乙烯(PVC)內襯管安裝的實施規程 |
(Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits ) |
| ANSI/ASTM F1750-2005 |
彩電球槍加螺紋推進裝置接口標準規范 |
|
| ANSI/ASTM F1777-2002 |
彩球運動場的規范 |
(Specification for Paintball Field Operations ) |
| ANSI/ASTM F1787-2003 |
攜帶式電熱輪轉烤肉器烤箱性能的試驗方法 |
(Test Method for Performance of Rotisserie Ovens ) |
| ANSI/ASTM F1802-2004 |
溢流閥性能試驗的試驗方法 |
|
| ANSI/ASTM F1803-2004 |
基于受控內徑的聚氯乙烯封閉式異型重力管和配件的規范 |
|
| ANSI/ASTM F1807-2002 |
SDR9交聯聚乙烯(Pex)管用的利用卷制銅環的金屬內插件規范 |
(Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for Sdr9 Cross-Linked Polyethylene (Pex) Tubing ) |
| ANSI/ASTM F1807-2004 |
SDR9交聯聚乙烯管用卷制銅環的金屬內插件規范 |
|
| ANSI/ASTM F1808-2003 |
水面艦艇的重量控制技術要求導則 |
(Guide for Weight Control Technical Requirements for Surface Ships ) |
| ANSI/ASTM F1853-2003 |
測定睡袋包裝體積的試驗方法 |
(Test Method for Measuring Sleeping Bag Packing Volume ) |
| ANSI/ASTM F1865-2002 |
交聯聚乙烯管(PEX)用的、帶壓力套管的機械冷膨脹插入式配件的規范 |
(Specification for Mechanical Cold Expansion Insert Fitting with Compression Sleeve for Crosslinked Polyethylene PEX Tubing ) |
| ANSI/ASTM F1871-2002 |
現存排污管和管道修復用波紋狀/形成聚氯乙烯管道形狀規范 |
(Specification for Folded/formed Poly (Vinyl Chloride) Pipe Type a for Existing Sewer and Conduit Rehabilitation ) |
| ANSI/ASTM F1883-2003 |
用美國線規(AWG)或米制單位選擇電線和電纜規格的實施規程 |
(Practice for Selection of Wire and Cable Size, in AWG or Metric Units ) |
| ANSI/ASTM F1887-2003 |
測量棒球和壘球回彈系數的試驗方法 |
(Test Method for Measuring the Coefficient of Restitution COR of Baseballs and Softballs ) |
| ANSI/ASTM F1888-2003 |
棒球和壘球受壓位移的試驗方法 |
(Test Method for Compression-Displacement of Baseballs and Softballs ) |
| ANSI/ASTM F1901-2004 |
屋頂排水系統用聚乙烯管道和配件規范 |
|
| ANSI/ASTM F1919-2003 |
單邊和雙邊、自加熱、柜臺式或固定于支架上的燃?xì)饣螂娂訜崞郊邋佉?guī)范 |
(Specification for Griddles, Single and Double Sided, Self-Heating, Counter or Stand Mounted Gas and Electric Fired ) |
| ANSI/ASTM F1920-2003 |
架式輸送裝置、熱水消毒和商用洗碗機的能量性能的試驗方法 |
(Test Method for the Energy Performance of Rack Conveyor, Hot Water Sanitizing, Commercial Dishwashing Machines ) |
| ANSI/ASTM F1924-2005 |
外徑可控的聚乙烯供氣管道用塑料機械配件規范 |
|
| ANSI/ASTM F1937-2005 |
馬術運動和騎馬用身體防護設備的規范 |
|
| ANSI/ASTM F1947-2004 |
折疊式聚氯乙烯管(PVC)裝進現有污水管和下水管道中的實施規程 |
|
| ANSI/ASTM F1948-2005 |
外部直徑受控的熱塑性氣體配送管用金屬機械配件規范 |
|
| ANSI/ASTM F1960-2004 |
交聯聚乙烯(PEX)管用具有過氧化物PEX增強環的冷膨脹配件的規范 |
|
| ANSI/ASTM F1960b-2002 |
用帶交聯聚乙烯管的過氧化聚乙烯增強環的冷膨脹配件規范 |
(Specification for Cold Expansion Fittings with Peroxide PEX Reinforcing Rings for Use with Cross-Linked Polyethylene (PEX) Tubing ) |
| ANSI/ASTM F1961-2002 |
交聯聚乙烯(PEX)管用帶盤簧的金屬機械冷壓擴口式管件規范 |
(Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing ) |
| ANSI/ASTM F1970-2005 |
聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系統專用工程配件、附件或閥門的規范 |
|
| ANSI/ASTM F1973-2002 |
聚乙烯(PE)燃料氣分配系統中工廠裝配的陽極衰減升降器和過渡配件的規范 |
(Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems ) |
| ANSI/ASTM F1974-2004 |
聚乙烯/鋁/聚乙烯和交聯聚乙烯/鋁/交聯聚乙烯復合壓力管用金屬內插件規范 |
|
| ANSI/ASTM F1977-2004 |
測定真空吸塵器系統初始部分過濾效率的試驗方法 |
|
| ANSI/ASTM F1979-2005 |
彩彈球運動用球的規范 |
|
| ANSI/ASTM F2019-2003 |
將玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)現場拖拉并安裝進已有管道的操作規程 |
(Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) ) |
| ANSI/ASTM F2023-2004 |
評價交聯聚乙烯(PEX)熱塑管耐氧化性的試驗方法 |
|
| ANSI/ASTM F2023-2005 |
評價交聯聚乙烯(PEX)管道及系統耐加氯熱水氧化性的試驗方法 |
|
| ANSI/ASTM F2040-2003 |
娛樂滑雪運動用防護帽的規范 |
(Specification for Helmets Used for Recreational Snow Sports ) |
| ANSI/ASTM F2044-2005 |
電氣液位指示設備規范 |
|
| ANSI/ASTM F2080-2004 |
交聯聚乙烯管用帶金屬壓縮管套的冷擴張配件的規范 |
|
| ANSI/ASTM F2080-2004 |
交聯聚乙烯管用帶金屬壓縮管套的冷擴張配件的規范 |
|
| ANSI/ASTM F2098-2004 |
保證SDR9交聯聚乙烯(PEX)管用金屬插件安全的不銹鋼夾子的試驗方法 |
|
| ANSI/ASTM F2106-2003 |
機動人力蹋車結構和性能特征評定的試驗方法 |
(Test Method for Evaluating Design and Performance Characteristics of Motorized Treadmills ) |
| ANSI/ASTM F2115-2003 |
電動踏旋器試驗方法 |
(Test Method for Motorized Treadmills ) |
| ANSI/ASTM F2115-2005 |
電動踏車試驗方法 |
|
| ANSI/ASTM F2131-2003 |
密封管用聚氯乙烯薄試樣的卻貝沖擊試驗 |
(Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes ) |
| ANSI/ASTM F2143-2004 |
冷藏食物餐具架及工作臺性能的試驗方法 |
|
| ANSI/ASTM F2153-2002 |
背負能力測量標準 |
(Standard for the Measurement of Backpack Capacity ) |
| ANSI/ASTM F2157-2002 |
合成表面通行線路規范 |
(Specification for Synthetic Surfaced Running Tracks ) |
| ANSI/ASTM F2159-2003 |
SDR9交聯聚乙烯(PEX)管道使用的利用銅夾緊環固定的塑料插入式管件規程 |
(Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing ) |
| ANSI/ASTM F2159-2005 |
SDR9交聯聚乙烯(PEX)管道用帶銅夾緊環固的嵌入式塑料配件規范 |
|
| ANSI/ASTM F2164-2002 |
采用液壓法對聚乙烯壓力管道系統進行場漏試驗的操作規程 |
(Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure ) |
| ANSI/ASTM F2165-2002 |
預絕緣軟管規范 |
(Specification for Flexible Pre-insulated Piping ) |
| ANSI/ASTM F2168-2002 |
包裝材料規范.石墨的波紋帶或網紋帶和模制環的規范 |
(Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape and Die-Formed Ring ) |
| ANSI/ASTM F2173-2002 |
監測病人呼吸混合的氧監測器.安全要求 |
(ISO 7767, Oxygen Monitors for Monitoring Patient Breathing Mixtures - Safety Requirements ) |
| ANSI/ASTM F2174-2002 |
驗證聲發射傳感器響應的實施規程 |
(Practice for Verifying Acoustic Emmission Sensor Response ) |
| ANSI/ASTM F2176-2002 |
聚乙烯管道及內管道用機械耦合件規范 |
(Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct ) |
| ANSI/ASTM F2177-2002 |
ISO 5361,麻醉和呼吸設備.氣管導管和連接件 |
(ISO 5361, Anaesthetic and Respiratory Equipment - Tracheal Tubes and Connectors ) |
| ANSI/ASTM F2184-2002 |
彩球欄網用安裝指南 |
(Installation Guide for Paintball Barrier Netting ) |
| ANSI/ASTM F2189-2002 |
氮氧化物監測儀的特殊要求的規范 |
(Specification for Particular Requirements for Nitric Oxide Monitors ) |
| ANSI/ASTM F2191-2002 |
石墨或碳編織紗線包裝材料規范 |
(Specification for Packing Material, Graphitic or Carbon Braided Yarn ) |
| ANSI/ASTM F2192-2002 |
測定和報告海事救難裝置的靠船能量和反應、系泊反應和偏差的試驗方法 |
(Test Method to Determine and Report the Berthing Energy and Reaction and the Mooring Reaction and Deflection of Marine Fenders ) |
| ANSI/ASTM F2192-2005 |
測定和報告海事救難裝置的靠船能量和反應的試驗方法 |
|
| ANSI/ASTM F2202-2002 |
慢烹飪/手持式烤箱和食品保溫柜的標準規范 |
(Standard Specification for Slow Cook/Hold Ovens and Food Warming Cabinet ) |
| ANSI/ASTM F2206-2002 |
熔縫的聚乙烯塑料管,管配件,片材,板材或砧板材制造的配件規范 |
(Specification for Fabricated Fittings of Butt-fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock or Block Stock ) |
| ANSI/ASTM F2207-2002 |
金屬輸氣管道的修復用住宅中修理管道襯套系統規范 |
(Specification for Cured-in-place Pipe Lining System for Rehabilitation of Metallic Gas Pipes ) |
| ANSI/ASTM F2216-2003 |
選定了強度的設備規范 |
(Specification for Selectorized Strength Equipment ) |
| ANSI/ASTM F2216-2005 |
選定了強度的設備規范 |
|
| ANSI/ASTM F2219-2003 |
高速棒球球棒性能因數測量的試驗方法 |
(Test Methods for Measuring High Speed Baseball Bat Performance Factor ) |
| ANSI/ASTM F2220-2003 |
頭形規范 |
(Specification for Headforms ) |
| ANSI/ASTM F2221-2002 |
醫用吸引設備.第2部分:人工動力吸引設備 |
(Medical Suction Equipment- Part 2: Manually Powered Suction Equipment ) |
| ANSI/ASTM F2222-2002 |
醫用吸引設備.真空或壓力源驅動的吸引設備 |
(Medical Suction Equipment-suction Equipment Powered from a Vacuum or Pressure Source ) |
| ANSI/ASTM F2223-2003 |
運動場表面材料ASTM標準的導則 |
(Guide for ASTM Standards on Playground Surfacing ) |
| ANSI/ASTM F2223-2004 |
運動場表面材料用ASTM標準的指南 |
|
| ANSI/ASTM F2225-2003 |
蹦床外罩的消費者安全規范 |
(Specification for Consumer Trampoline Enclosures ) |
| ANSI/ASTM F2237-2003 |
立式過度燃燒焙烤用具性能的試驗方法 |
(Test Method for the Performance of Upright Overfired Broilers ) |
| ANSI/ASTM F2238-2003 |
快速烹飪爐性能的試驗方法 |
(Test Method for the Performance of Rapid Cook Ovens ) |
| ANSI/ASTM F2239-2003 |
帶式焙烤用具性能的試驗方法 |
(Test Method for Performance of Conveyor Broilers ) |
| ANSI/ASTM F2262-2004 |
OD控制的SDR9交聯聚乙烯/鋁/交聯聚乙烯管的規范 |
|
| ANSI/ASTM F2262-2005 |
OD可控的SDR9交聯聚乙烯/鋁/交聯聚乙烯管的規范 |
|
| ANSI/ASTM F2263-2005 |
聚乙烯(PE)管抗氯化水氧化性評價的試驗方法 |
|
| ANSI/ASTM F2265-2003 |
醫用抽吸設備.第1部分:電動抽吸設備.安全要求 |
(Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements ) |
| ANSI/ASTM F2268-2003 |
自行車系列號規范 |
(Specification for Bicycle Serial Numbers ) |
| ANSI/ASTM F2270-2004 |
運動場上警示跑道區域的建造和維護用指南 |
|
| ANSI/ASTM F2273-2003 |
自行車車叉的試驗方法 |
(Test Methods for Bicycle Forks ) |
| ANSI/ASTM F2274-2003 |
條件3的自行車輪叉規范 |
(Specification for Condition 3 Bicycle Forks ) |
| ANSI/ASTM F2275-2003 |
打獵器材(Treestand)生產廠質量保證計劃實施規程 |
(Practice for Treestand Manufacturer Quality Assurance Program ) |
| ANSI/ASTM F2276-2005 |
健身器材規范 |
|
| ANSI/ASTM F2277-2003 |
對選定的強力設備的設計和性能特征進行評定的試驗方法 |
(Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment ) |
| ANSI/ASTM F2278-2003 |
評價彩彈攔截網的試驗方法 |
(Test Method for Evaluating Paintball Barrier Netting ) |
| ANSI/ASTM F2283-2004 |
船載除油系統的規范 |
|
| ANSI/ASTM F2288-2003 |
ISO 5366-1麻醉和呼吸設備的采用.氣管造口術用管.第1部分:成人氣管造口術用管和連接接頭 |
(Adoption of ISO 5366-1 Anesthetic and Respirator Y Equipment - Tracheostomy Tubes - Part1: Tracheostomy Tubes and Connectors for Use in Adults ) |
| ANSI/ASTM F2289-2003 |
ISO 5366-3麻醉和呼吸設備的采用.氣管造口術用管.第3部分:兒科氣管造口術用管和連接接頭 |
(Adoption of ISO 5366-3 Anaesthetic and Respiratory Equipment - Tracheostomy Tubes - Part 3: Paediatric Tracheostomy Tubes ) |
| ANSI/ASTM F2290-2003 |
醫療氣體用ISO 5359低壓軟管組件的采用 |
(Adoption of ISO 5359 Low-pressure Hose Assemblies for Use with Medical Gases ) |
| ANSI/ASTM F2307-2003 |
基于可控內徑的系列10聚氯乙烯封閉式異型重力管和配件的規范’(project *62-02-03) |
(Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (project *62-02-03) ) |
| ANSI/ASTM F2324-2003 |
預清洗噴霧閥的試驗方法 |
(Test Method for Pre-rinse Spray Valves) |
| ANSI/ASTM F2330-2004 |
評價多層聚烯烴管耐氯化熱水氧化性的試驗方法 |
|
| ANSI/ASTM F2331-2004 |
測定熱塑性螺紋管和配件材料的螺紋密封件的化學兼容性的試驗方法 |
|
| ANSI/ASTM F2336-2005 |
曲棍球運動設施指南 |
|
| ANSI/ASTM F2361-2004 |
調整船用低壓(1000V ac或更低的)交流電動機(最高達500馬力)的試驗方法 |
|
| ANSI/ASTM F2362-2004 |
溫度監控設備用規范 |
|
| ANSI/ASTM F2363-2004 |
美國海岸警衛隊Ii型或Imo Marpol 73/78附錄Iv:海上衛生裝置(流量通過處理)的規范 |
|
| ANSI/ASTM F2379-2004 |
電動開啟清洗槽能量性能的試驗方法 |
|
| ANSI/ASTM F2380-2004 |
傳送帶式烤爐性能的試驗方法 |
|
| ANSI/ASTM F2397-2004 |
軍體運動用防護安全帽的規范 |
|
| ANSI/ASTM F2397-2005 |
軍體運動用防護安全帽的規范 |
|
| ANSI/ASTM F2398-2004 |
測量棒球棒或軟球拍的慣性矩和沖擊中心的試驗方法 |
|
| ANSI/ASTM F2400-2004 |
點拱頂建造用防護帽的規范 |
|
| ANSI/ASTM F2418-2005 |
聚丙烯(pp)波紋狀壁的雨水收集容器的規范 |
|
| ANSI/ASTM F2440-2005 |
室內墻/部件填充物規范 |
|
| ANSI/ASTM F381-2005 |
蹦床的部件、安裝和使用的消費者安全規范 |
|
| ANSI/ASTM F400-2004 |
打火機用戶安全規范 |
|
| ANSI/ASTM F405-2005 |
聚乙烯(PE)波紋管及管配件規范 |
|
| ANSI/ASTM F438-2002 |
套節型氯化聚氯乙烯(CPVC)塑料管配件規范(40號表) |
(Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 ) |
| ANSI/ASTM F438-2004 |
套管型氯化聚氯乙烯(CPVC)塑料管配件規范.表40 |
|
| ANSI/ASTM F439-2002 |
套節型氯化聚氯乙烯(CPVC)塑料管配件規范(80號表) |
(Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 ) |
| ANSI/ASTM F439-2005 |
氯化聚氯乙烯(CPVC)塑料管配件規范.表80 |
|
| ANSI/ASTM F449-2002 |
農業排水或地下水位控制用熱塑塑料波紋管地下安裝實施規程 |
(Practice for Subsurface Installation of Corrugated Thermoplastic Tubing for Agricultural Drainage or Water Table Control ) |
| ANSI/ASTM F477-2002 |
連接塑料管用的彈性密封墊圈的規范 |
(Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ) |
| ANSI/ASTM F480-2002 |
采用標準尺寸比(SDR)制作的熱塑性壁鑄造管和耦合件規范(表40和表80) |
(Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), Schedule 40 and Schedule 80) ) |
| ANSI/ASTM F493-2004 |
氯化聚氯乙烯(CPVC)塑料管及配件用溶劑粘結劑規范 |
|
| ANSI/ASTM F539-2002 |
組裝運動鞋的操作規范 |
(Practice for Fitting Athletic Footwear ) |
| ANSI/ASTM F542-2002 |
電子件及微電子件封裝用密封化合物發熱溫度的試驗方法 |
(Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation ) |
| ANSI/ASTM F588-2004 |
窗組件(不包括門窗玻璃)抗強力進入的試驗方法 |
|
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com