標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM E 424-2002 |
片材的太陽能量傳輸性和反射性(陸地上)的試驗方法 |
Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials |
| ANSI/ASTM E 427-1996 |
用鹵素檢漏器(堿離子二極管)測試泄漏的實施規程 |
Practice for Testing for Leaks Using the Halogen Leak Detector (Alkali-Ion Diode) |
| ANSI/ASTM E 428-1996 |
超聲波檢驗用鋼標準塊的制造和管理實施規程 |
Practice for Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Inspection |
| ANSI/ASTM E 431-1996 |
半導體及有關器件的射線照相的說明指南 |
Guide to Interpretation of Radiographs of Semiconductors and Related Devices |
| ANSI/ASTM E 432-1997 |
滲漏試驗方法的選擇指南 |
Guide for Selection of a Leak Testing Method |
| ANSI/ASTM E 433-1997 |
液體滲透檢查用參考射線照片 |
Reference Photographs for Liquid Penetrant Inspection |
| ANSI/ASTM E 437-1997 |
工業用金屬絲布及篩(方孔系列)規范 |
Specification for Industrial Wire Cloth and Screens (Square Opening Series) |
| ANSI/ASTM E 446-1996 |
鋼鑄件厚度在2 in(51mm)以下用基準射線照相 |
Reference Radiographs for Steel Castings up to 2 in. (51 mm) in Thickness |
| ANSI/ASTM E 455-1976 |
建筑物屋頂隔板構建或成形樓板的靜態負載試驗方法 |
Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings (04.11) |
| ANSI/ASTM E 479-1996 |
泄漏試驗規范的制定指南 |
Guide for Preparation of a Leak Testing Specification |
| ANSI/ASTM E 488-1996 |
混凝土制成的錨及磚石工程構件的強度的試驗方法 |
Test Methods for Strength of Anchors in Concrete and Masonry Elements (04.11) |
| ANSI/ASTM E 493-1997 |
在外流試驗法中用質譜儀檢漏器檢漏的試驗方法 |
Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode |
| ANSI/ASTM E 494-1995 |
材料中測量超聲速度的操作規程 |
Practice for Measuring Ultrasonic Velocity in Materials |
| ANSI/ASTM E 498-1996 |
在示蹤探針法中用質譜儀檢漏器或殘余氣體分析器檢漏的試驗方法 |
Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode |
| ANSI/ASTM E 499-1996 |
在探測器探針法中用質譜儀檢漏器檢漏的試驗方法 |
Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode |
| ANSI/ASTM E 505-2001 |
鋁鎂壓模鑄造檢驗的參考射線攝影 |
Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
| ANSI/ASTM E 515-1996 |
用氣泡發射技術檢漏的試驗方法 |
Test Method for Leaks Using Bubble Emission Techniques |
| ANSI/ASTM E 527-1996 |
金屬及合金標準號的實施規程 |
Practice for Numbering Metals and Alloys (Uns) |
| ANSI/ASTM E 529-1994 |
建筑結構用橫梁的傳導撓曲試驗指南 |
Guide for Conducting Flexural Tests on Beams and Girders for Building Construction (04.11) |
| ANSI/ASTM E 541-2002 |
從事建造建筑物的系統分析和符合性保證的機構的準則 |
Criteria for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building |
| ANSI/ASTM E 543-2002 |
對執行無損檢驗的機構評價規程 |
Practice for Evaluating Agencies that Perform Nondestructive Testing |
| ANSI/ASTM E 545-1997 |
測定直接熱中子射線照相檢驗中成像質量的方法 |
Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination |
| ANSI/ASTM E 546-1988 |
密封絕緣玻璃部件熔點試驗方法 |
Test Method for Frost Point of Sealed Insulating Glass Units (04.11) |
| ANSI/ASTM E 547-1996 |
通過循環靜態空氣壓差測定門、窗簾墻和外窗水滲透的試驗方法 |
Test Method for Water Penetration of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential (04.11) |
| ANSI/ASTM E 548-1996 |
用于評定實驗室資格的一般準則指南 |
Guide for General Criteria Used for Evaluating Laboratory Competence |
| ANSI/ASTM E 564-1995 |
建筑構架墻剪切抗性靜態承載的試驗方法 |
Method of Static Load Test for Shear Resistance of Framed Walls for Buildings (04.11) |
| ANSI/ASTM E 569-1997 |
受控激勵時結構件聲發射監測的實施規范 |
Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation |
| ANSI/ASTM E 570-1997 |
鐵磁鋼管形制品的磁力泄漏檢驗實施規范 |
Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
| ANSI/ASTM E 575-1983 |
報告建筑物結構、構件、連接件和組件的結構測試數據的實施規程 |
Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies (04.11) |
| ANSI/ASTM E 576-1988 |
垂直位置密封絕緣玻璃部件熔點試驗方法 |
Test Method for Frost Point of Sealed Insulating Glass Units in the Vertical Position (04.11) |
| ANSI/ASTM E 577-1985 |
直線建筑部件和系統的尺寸協調指南 |
Guide for Dimensional Coordination of Rectilinear Building Parts and Systems (04.11) |
| ANSI/ASTM E 584-1996 |
制訂用來幫助實施國家能源計劃的ASTM自愿一致標準的推薦指南 |
Recommended Guide for Developing the (ASTM) Voluntary Consensus Standards Required to Help Implement the National Energy Plan |
| ANSI/ASTM E 587-1996 |
用觸點法作超聲波斜束檢驗的實施規程 |
Practice for Ultrasonic Angle-Beam Examination by the Contact Method |
| ANSI/ASTM E 5870-1997 |
計算塑料特性保留指數的實施規程 |
Practice for Calculating the Property Retention Index of Plastics |
| ANSI/ASTM E 596-1997 |
隔音室減少噪音的實驗室測量的試驗方法 |
Test Method for Laboratory Measurement of the Noise Reduction of Sound-Isolating Enclosures |
| ANSI/ASTM E 603-2001 |
室內燃燒實驗指南 |
Guide for Room Fire Experiments |
| ANSI/ASTM E 605-1993 |
建筑部件適用的噴射耐火材料厚度和密度的試驗方法 |
Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members (04.11) |
| ANSI/ASTM E 618-1996 |
用自動切絲機/自動軋棒機評定黑色金屬的機械加工性能的方法 |
Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine |
| ANSI/ASTM E 621-1994 |
建筑設計和結構中米制單位的使用的實施規程 |
Practice for Use of Metric (SI) Units in Building Design and Construction (04.11) |
| ANSI/ASTM E 631-1993 |
建筑物建設術語 |
Terminology of Building Construction (04.11) |
| ANSI/ASTM E 651-2002 |
對從事建造建筑物的系統分析和符合性保證的機構的能力評價導則 |
Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building |
| ANSI/ASTM E 661-1988 |
集中靜荷載和沖擊負荷下木材和木基樓板及屋頂覆層的性能試驗方法 |
Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads (04.11) |
| ANSI/ASTM E 662-2001 |
通過固體材料對煙霧產生的特定視覺密度的試驗方法 |
Test Method For Specific Optical Density Of Smoke Generated By Solid Materials |
| ANSI/ASTM E 664-1996 |
用浸漬法測量縱向超聲波的表面衰減的實施規程 |
Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonicwaves by Immersion Method |
| ANSI/ASTM E 689-1996 |
球墨鐵鑄件的參考射線照相 |
Reference Radiographs for Ductile Iron Castings |
| ANSI/ASTM E 69-1996 |
用火管式裝置測定經過處理的木材燃燒特性的試驗方法 |
Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus |
| ANSI/ASTM E 691-1999 |
為測定試驗方法精密度開展的實驗室間研究的實施規范 |
Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
| ANSI/ASTM E 695-1979 |
墻、樓板和屋頂結構的相對抗沖擊負荷的測量方法 |
Method for Measuring Relative Resistance of Wall, Floor, and Roof Constructions to Impact Loading (04.11) |
| ANSI/ASTM E 703-1996 |
有色金屬的電磁(渦流)分類實施規范 |
Practice for Electromagnetic (Eddy-Current) Sorting of Nonferrous Metals |
| ANSI/ASTM E 709-2001 |
磁粉檢驗指南 |
Guide for Magnetic Particle Examination |
| ANSI/ASTM E 713-1988 |
建筑繪圖中米制標度的選擇指南 |
Guide for Selection of Scales for Metric Building Drawings (04.11) |
| ANSI/ASTM E 72-1995 |
建筑結構踏板傳導強度的試驗方法 |
Methods of Conducting Strength Tests of Panels for Building Construction (04.11) |
| ANSI/ASTM E 73-1983 |
構架組件靜態承載測試實施規范 |
Practice for Static Load Testing of Truss Assemblies (04.11) |
| ANSI/ASTM E 736-1992 |
建筑部件適用的噴射耐火材料內聚性/粘合性的試驗方法 |
Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members (04.11) |
| ANSI/ASTM E 741-1995 |
示蹤氣體稀釋方法測定單區帶空氣變化的試驗方法 |
Test Methods for Determining Air Change in a Single Zone by Means of Tracer Gas Dilution (04.11) |
| ANSI/ASTM E 746-2002 |
工業射線攝影膠片相關圖像質量特性曲線測定的試驗方法 |
Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film |
| ANSI/ASTM E 747-1997 |
輻射攝影術用金屬線圖像質量指示器的設計、制造和材料組分類實施規范 |
Practice for Design, Manufacture, and Material Grouping Classification of Wire Image Quality Indicators (Iqi) Used for Radiology |
| ANSI/ASTM E 748-1996 |
材料的熱中子射線照相術規程 |
Practices for Thermal Neutron Radiography of Materials |
| ANSI/ASTM E 749-2001 |
在連續焊接時聲音散發檢測操作規程 |
Practice for Acoustic Emission Monitoring During Continuous Welding |
| ANSI/ASTM E 750-1996 |
聲發射儀器的表征實施規范 |
Practice for Characterizing Acoustic Emission Instrumentation |
| ANSI/ASTM E 751-2001 |
在阻點焊接時聲音散發檢測的操作規程 |
Practice for Acoustic Emission Monitoring During Resistance Spot-Welding |
| ANSI/ASTM E 754-1980 |
埋入磚石灰縫中的拉桿和錨的拔拉阻力的試驗方法 |
Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints (04.11) |
| ANSI/ASTM E 759-1992 |
建筑部件適用的噴射耐火材料偏轉效果的試驗方法 |
Test Method for Effect of Deflection of Sprayed Fire-Resistive Material Applied to Structural Members (04.11) |
| ANSI/ASTM E 760-1992 |
沖擊對結構構件上噴涂防火材料粘著力影響的試驗方法 |
Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members (04.11) |
| ANSI/ASTM E 761-1992 |
建筑部件適用的噴射耐火材料壓縮強度的試驗方法 |
Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members (04.11) |
| ANSI/ASTM E 773-1988 |
密封絕緣玻璃組件密封持久性的試驗方法 |
Test Method for Seal Durability of Sealed Insulating Glass Units (04.11) |
| ANSI/ASTM E 774-1992 |
密封絕緣玻璃部件規范 |
Specification for Sealed Insulating Glass Units (04.11) |
| ANSI/ASTM E 779-1987 |
用風扇增壓法測定空氣泄漏率的試驗方法 |
Test Method for Determining Air Leakage Rate by Fan Pressurization (04.11) |
| ANSI/ASTM E 783-1993 |
安裝的外窗和門的空氣泄漏現場測量的試驗方法 |
Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors (04.11) |
| ANSI/ASTM E 792-1995 |
臨床實驗室信息管理系統的選擇指南 |
Selection of a Clinical Laboratory Information Management System, Guide for (14.01) |
| ANSI/ASTM E 797-1996 |
用手動超聲脈沖回波接觸法測量厚度的實施規范 |
Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method |
| ANSI/ASTM E 800-2001 |
著火期間存在或產生的氣體測量指南 |
Guide For Measurement Of Gases Present Or Generated During Fires |
| ANSI/ASTM E 801-2001 |
電子裝置的放射性檢測的質量控制操作規程 |
Practice for Controlling Quality of Radiological Examination of Electronic Devices |
| ANSI/ASTM E 802-1996 |
厚度4 1/2英寸(114mm)的灰口鑄鐵件用基準射線照相 |
Reference Radiographs for Gray Iron Castings up to 4 1/2 in. (114 mm) in Thickness |
| ANSI/ASTM E 803-1996 |
中子射線照相束長度直徑比測定法 |
Method for Determining the L D Ratio of Neutron Radiography Beams |
| ANSI/ASTM E 833-1997 |
建筑功效學的術語 |
Terminology of Building Ergonomics (04.07) |
| ANSI/ASTM E 835-1993 |
石膏和混凝土磚石構件的模數協調指南 |
Guide for Modular Coordination of Clay and Concrete Masonry Units (04.11) |
| ANSI/ASTM E 837-2001 |
采用鉆孔應變測量法測定剩余應力的試驗方法 |
Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method |
| ANSI/ASTM E 864-1996 |
多孔防護板粘結鋁合金表面制備規程 |
Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels (04.11) |
| ANSI/ASTM E 865-1995 |
多孔夾板用結構膜粘結劑規范 |
Specification for Structural Film Adhesives for Honeycomb Sandwich Panels (04.11) |
| ANSI/ASTM E 866-1996 |
黏結在多孔防護板的鋁合金防腐粘結底層涂料規范 |
Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels (04.11) |
| ANSI/ASTM E 874-1996 |
防護板用非金屬蜂窩芯子鋁飾面粘接的實施規程 |
Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels (04.11) |
| ANSI/ASTM E 894-1988 |
建筑物護欄和永久金屬護欄系統用錨固裝置的試驗方法 |
Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings (04.11) |
| ANSI/ASTM E 90-1997 |
建筑物隔墻和構件的氣載噪聲傳輸損耗的實驗室測量的試驗方法 |
Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partions and Elements |
| ANSI/ASTM E 907-1996 |
現場測量瀝青組合屋面和鋼板剛性絕緣屋面系統的耐上升性的試驗方法 |
Test Method for Field Testing Uplift Resistance of Roofing Systems Employing Steel Deck Rigid Insulation and Bituminous Built-Up Roofing (04.07) |
| ANSI/ASTM E 908-1996 |
校準氣體基準泄漏規程 |
Practice for Calibrating Gaseous Reference Leaks |
| ANSI/ASTM E 917-1994 |
測定建筑物和建筑系統使用期成本的實施規程 |
Practice for Measuring Life-Cycle Costs of Buildings and Building Systems (04.11) |
| ANSI/ASTM E 935-1993 |
建筑物護欄和永久金屬護欄系統性能的試驗方法 |
Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings (04.11) |
| ANSI/ASTM E 936-1996 |
使用預成形屋面絕緣鋼鋪面和瀝青組合屋面的屋面系統組件實施規程 |
Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (04.11) |
| ANSI/ASTM E 937-1993 |
建筑組件適用的噴射耐火材料(SFRM)鋼材腐蝕的試驗方法 |
Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members (04.11) |
| ANSI/ASTM E 957-1995 |
地熱能的相關術語 |
Terminology Relating to Geothermal Energy |
| ANSI/ASTM E 964-1993 |
測算建筑物和建筑系統收支比率和節約投資比率的實施規范 |
Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems (04.11) |
| ANSI/ASTM E 977-1996 |
導電材料的熱電分類實施規范 |
Practice for Thermoelectric Sorting of Electrically Conductive Materials |
| ANSI/ASTM E 985-1996 |
建筑物護欄和永久金屬護欄系統的規范 |
Specification for Permanent Metal Railing Systems and Rails for Buildings (04.11) |
| ANSI/ASTM E 987-1988 |
門窗產品玻璃卸去力的試驗方法 |
Test Methods for Deglazing Force of Fenestration Products (04.11) |
| ANSI/ASTM E 990-1993 |
蜂窩狀夾層遮蔽板用芯層拼接粘結劑規范 |
Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels (04.11) |
| ANSI/ASTM E 994-1996 |
實驗室認可制度校正和試驗的操作和認可指南 |
Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition |
| ANSI/ASTM E 997-1984 |
用破壞法測定均勻靜載荷影響下外窗玻璃、隔墻和門的結構性能的試驗方法 |
Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors under the Influence of Uniform Static Loads by Destructive Methods (04.11) |
| ANSI/ASTM E 998-1984 |
用無損試驗法測定在均勻靜態承載影響下窗戶、幕墻和門上玻璃的結構性能的方法 |
Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors under the Influence of Uniform Static Loads by Nondestructive Method (04.11) |
| ANSI/ASTM E 999-1996 |
工業射線照相膠片沖洗的質量控制指南 |
Guide for Controlling the Quality of Industrial Radiographic Film Processing |
| ANSI/ASTM E1026-2004 |
弗里克基準劑量測定系統的實施規程 |
|
| ANSI/ASTM E1074-2004 |
測算建筑物和建筑系統投資的凈收益的實施規程 |
|
| ANSI/ASTM E108-2004 |
屋頂層著火試驗的試驗方法 |
|
| ANSI/ASTM E108-2004 |
屋頂層著火試驗的試驗方法 |
|
| ANSI/ASTM E1091-2003 |
防護板用非金屬夾心板規范 |
(Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels ) |
| ANSI/ASTM E1121-2002 |
建筑物和建筑系統投資回收率的測算實施規程 |
(Practice for Measuring Payback for Investments in Buildings and Building Systems (04.11) ) |
| ANSI/ASTM E1169-2002 |
堅固性試驗指南 |
(Guide for Conducting Ruggedness Tests ) |
| ANSI/ASTM E1171-2002 |
在循環溫度和濕度環境下光伏模塊的試驗方法 |
(Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments ) |
| ANSI/ASTM E1185-2002 |
建筑物和建筑系統投資評估用經濟方法的選擇指南 |
(Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems (04.11) ) |
| ANSI/ASTM E1186-2003 |
建筑物外層和空氣隔離系統漏氣的現場檢測實施規程 |
(Practices for Air Leakage Site Detection in Building Envelopes and Air Retarder Systems ) |
| ANSI/ASTM E1204-2004 |
食品加工用γ輻射設備的劑量測量實施規范 |
|
| ANSI/ASTM E1204-2004 |
食品加工用γ輻射設備的劑量測量實施規范 |
(Dosimetry in Gamma Irradiation Facilities for Food Processing, Practice for (12.02) ) |
| ANSI/ASTM E1239-2005 |
電子醫療記錄EHR系統的預約/掛號-接收、出院和轉院R-ADT系統的描述指南 |
|
| ANSI/ASTM E1275-2004 |
放射鉻箔劑量測定系統使用的實施規范 |
|
| ANSI/ASTM E1275-2004 |
放射鉻箔劑量測定系統使用的實施規范 |
(The Use of a Radiochromic Film Dosimetry System, Practice for (12.02) ) |
| ANSI/ASTM E1276-2002 |
有機玻璃劑量測定系統使用的實施規程 |
(Use of Polymethylmethacrylate Dosimetry System, Practice for ) |
| ANSI/ASTM E1300-2003 |
測定建筑物玻璃耐負荷能力的實施規程 |
(Practice for Determining Load Resistance of Glass in Buildings ) |
| ANSI/ASTM E1310-2004 |
放射鉻光學波導管劑量測定系統使用的實施規范 |
|
| ANSI/ASTM E1310-2004 |
放射鉻光學波導管劑量測定系統使用的實施規范 |
(Practice for Use of a Radiochromic Optical Waveguide Dosimetry System ) |
| ANSI/ASTM E1317-2002 |
船舶表面層易燃性的試驗方法 |
(Test Method for Flammability of Marine Surface Finishes ) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com