標準號 |
中文名稱 |
英文名稱 |
| ANSI/NAPM IT 4.40-1996 |
攝影(沖洗).污水.生化需氧量(BOD)和溶解氧(DO)的測定 |
Photography (Processing) - Effluents - Determination of Biochemical Oxygen Demand (BOD) and Dissolved Oxygen (DO) |
| ANSI/NAPM IT 4.43-1993 |
攝影(處理).廢液.總氰的測定方法 |
Photography (Processing) - Effluents - Method for Determining Total Cyanide |
| ANSI/NAPM IT 4.99-1996 |
攝影.攝影級藥液.試驗方法 |
Photography - Photographic-Grade Chemicals - Test Methods |
| ANSI/NAPM IT 7.100-1993 |
視聽系統.使用視聽設備的教學場所的設計測定推薦規程 |
Audiovisual Systems - Recommended Practice for Determining the Design of Teaching-Learning Spaces Where Audiovisual Equipment Is Used |
| ANSI/NAPM IT 7.108-1997 |
視聽系統.與音頻、視頻及電視類設備一起使用的實驗用大車 |
Audiovisual Systems - Tall Institutional Carts for Use with Audio-, Video-, and Television-Type Equipment |
| ANSI/NAPM IT 7.214-1995 |
視聽系統.放映銀幕.三角架.試驗方法和報告項目 |
Audiovisual Systems - Projection Screens - Tripod - Test Methods and Reporting Terms |
| ANSI/NAPM IT 7.223-1994 |
視聽系統.有254x254mm(10x10in)放映平臺的高架放映機.測試原片 |
Audiovisual Systems - Overhead Projectors with 254 x 254 mm (10 x 10 in) Stage - Test Transparency |
| ANSI/NAPM IT 7.228-1997 |
視聽系統.電子放映.固定分辨率的放映機 |
Audiovisual Systems - Electronic Projection - Fixed Resolution Projectors |
| ANSI/NAPM IT 7.405-1994 |
視聽系統.聲音記錄磁條式信息卡 |
Audiovisual Systems - Audio Recorded Magnetically Striped Information Cards |
| ANSI/NAPM IT 9.1-1996 |
成像材料.已沖洗的銀鹽明膠型黑白膠片.穩定性規范 |
Imaging Materials - Processed Silver-Gelatin Type Black-and White Film - Specifications for Stability |
| ANSI/NAPM IT 9.11-1993 |
成像介質.沖洗過的安全攝影膠片.儲存 |
Imaging Media - Processed Safety Photographic Films - Storage |
| ANSI/NAPM IT 9.12-1995 |
成像材料.沖洗過的微泡攝影膠片.穩定性規范 |
Imaging Materials - Processed Vesicular Photographic Film - Specifications for Stability |
| ANSI/NAPM IT 9.13-1996 |
成像材料.關于穩定性的術語詞匯 |
Imaging Materials - Glossary of Terms Pertaining to Stability |
| ANSI/NAPM IT 9.22-1996 |
成像材料.沖洗過的攝影膠片.耐劃性測定方法 |
Imaging Materials - Processed Photographic Films - Methods for Determining Scratch Resistance |
| ANSI/NAPM IT 9.3-1997 |
攝影.膠片和相紙.尺寸變化的測定 |
Photography - Films and Papers - Determination of Dimensional Change |
| ANSI/NAPM IT 9.5-1996 |
成像材料.氨法重氮攝影膠片.穩定性規范 |
Imaging Materials - Ammonia-Processed Diazo Photographic Film - Specifications for Stability |
| ANSI/NAPM IT 9.9-1996 |
成像材料.彩色相片的穩定性.測量方法 |
Imaging Materials - Stability of Color Photographic Images - Methods for Measuring |
| ANSI/NAPM IT4.101-1985 |
攝影(化學藥品).硫酸 |
Photography (Chemicals) - Sulfuric Acid |
| ANSI/NAPM IT4.104-1980 |
攝影級鹽酸 |
Photographic Grade Hydrochloric Acid, HCl |
| ANSI/NAPM IT4.107-1983 |
攝影(化學藥品).無水檸檬酸和一水檸檬酸 |
Photography (Chemicals) - Citric Acid, Anhydrous and Citric Acid, Monohydrate |
| ANSI/NAPM IT4.137-1984 |
攝影(化學藥品).4-(N-乙基-N-2甲烷硫酰氨基)-2-甲基亞苯基-雙胺三硫化二一水化物 |
Photography (Chemicals) - 4-(N-Ethyl-N-2-Methanesulfonylamino- ethyl)-2-Methylphenylenediamine Sesquisulfate Monohydrate |
| ANSI/NAPM IT4.154-1981 |
攝影級氯化鋁溶液 |
Photographic Grade Aluminum Chloride Solution |
| ANSI/NAPM IT4.155-1981 |
攝影級硫酸鋁溶液 |
Photographic Grade Aluminum Sulfate Solution |
| ANSI/NAPM IT4.156-1986 |
攝影(化學藥品).無水甲醛化亞硫酸氫鈉 |
Photography (Chemicals) - Sodium Formaldehyde Bisulfite, Anhydrous |
| ANSI/NAPM IT4.177-1983 |
攝影(藥液).硫氰酸鈉晶體和硫氰酸鈉溶液(50%) |
Photography (Chemicals) - Sodium Thiocyanate Crystals and Sodium Thiocyanate Solution (50%) |
| ANSI/NAPM IT4.181-1980 |
攝影級芐醇C6H5CH20H |
Photographic Grade Benzyl Alcohol C6H5CH2OH |
| ANSI/NAPM IT4.185-1987 |
攝影(化學藥品).乙二胺四醋酸及其鹽類 |
Photography (Chemicals) - Ethylene- diaminetetraacetic Acid (EDTA) ((Ethylenedinitrilo) Tetraacetic Acid) and Its Salts |
| ANSI/NAPM IT4.186-1987 |
攝影(化學藥品).硫酸羥胺 |
Photography (Chemicals) - Hydroxylamine Sulfate |
| ANSI/NAPM IT4.188-1980 |
攝影級乙二胺H2N.CH2.CH2.NH2 |
Photographic Grade Ethylenediamine H2N.CH2. CH2.NH2 |
| ANSI/NAPM IT4.189-1984 |
攝影(化學藥品).乙雙胺四乙鐵銨溶液和乙雙胺四乙三水化鈉鐵 |
Photography (Chemicals) - Ferric Ammonium Ethylenediamine- tetraacetate Solution and Sodium Ferric Ethylenediamine-Tetraacetate Trihydrate |
| ANSI/NAPM IT4.201-1981 |
攝影級碘化鉀 |
Photographic Grade Potassium Iodide |
| ANSI/NAPM IT4.205-1984 |
攝影(化學藥品).5-甲基苯并三唑 |
Photography (Chemicals) - 5-Methylbenzotriazole |
| ANSI/NAPM IT4.206-1984 |
攝影(化學藥品).5-硝基苯并米唑硝酸 |
Photography (Chemicals) - 5-Nitrobenzimidazole Nitrate |
| ANSI/NAPM IT4.207-1982 |
攝影級溴化鈉 |
Photographic Grade Sodium Bromide |
| ANSI/NAPM IT4.231-1982 |
攝影級八水偏硼酸鈉 |
Photographic Grade Sodium Metaborate Octahydrate |
| ANSI/NAPM IT4.234-1986 |
攝影(化學藥品).十二水磷酸三鈉 |
Photography (Chemicals)-Trisodium Phosphate, Dodecahydrate |
| ANSI/NAPM IT4.303-1984 |
攝影(化學藥品).過硫酸鉀 |
Photography (Chemicals) - Potassium Persulfate |
| ANSI/NAPM IT4.304-1987 |
攝影(藥液).十水亞鐵氰化鈉 |
Photography (Chemicals)-Sodium Ferrocyanide, Decahydrate |
| ANSI/NAPSA P 100-1-1993 |
劃船運動設備.小舟、美式帆布艇和充氣筏用警告標簽 |
Paddlesports Equipment - Warning Label for Canoes, Kayaks, and Inflatables |
| ANSI/NB 23-2003 |
國家檢驗局規程 |
(National Board Inspection Code ) |
| ANSI/NCCLS C 46-A-2001 |
血液氣體和PH分析和相關測量;接受的指南 |
Blood Gas and pH Analysis and Related Measurements; Approved Guideline |
| ANSI/NCCLS GP 17-A-1998 |
臨床實驗室安全.驗收導則 |
Clinical Laboratory Safety; Approved Guideline |
| ANSI/NCCLS GP17-A 2-2004 |
臨床實驗室安全.驗收導則 |
|
| ANSI/NCCLS H 1-A 4-1997 |
血樣采集用真空管.第3版 |
Evacuated Tubes for Blood Specimen Collection - Third Edition |
| ANSI/NCCLS H 10-A 2-1997 |
確認鐮狀血紅蛋白存在的溶解度試驗 |
Confirming the Presence of Sickling Hemoglobins, Solubility Test for |
| ANSI/NCCLS H 11-A 2-1992 |
實驗室分析用動脈血的經皮采集 |
Percutaneous Collection of Arterial Blood for Laboratory Analysis |
| ANSI/NCCLS H 15-A 2-1996 |
血中血紅蛋白定量測定的參考法 |
Hemoglobin in Blood, Reference Procedure for Quantitative Determination of |
| ANSI/NCCLS H 8-A 2-1997 |
乙酸纖維素電泳法檢測反常血紅蛋白 |
Abnormal Hemoglobin Using Cellulose Acetate Electrophoresis, Detection of |
| ANSI/NCCLS LIS1-A-2002 |
臨床實驗室儀器與計算機系統間消息傳送用低層協議規范 |
(Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems, Specification for (14.01) ) |
| ANSI/NCCLS LIS3-A-2002 |
臨床實驗室信息管理系統的選擇指南 |
(Selection of a Clinical Laboratory Information Management System, Guide for (14.01) ) |
| ANSI/NCCLS M 11-A 3-1996 |
厭氧菌的抗菌易感性試驗方法 |
Antimicrobial Susceptibility Testing of Anaerobic Bacteria, Methods for |
| ANSI/NCCLS M 2-A 6-1997 |
抗菌盤易感性試驗的性能標準 |
Performance Standards for Antimicrobial Disk Susceptibility Tests |
| ANSI/NCCLS M 7-A 4-1997 |
細菌需氧增長的稀釋抗菌易感性試驗方法 |
Methods for Dilution Antimicrobial Susceptibility Tests for Bacteria that Grow Aerobically |
| ANSI/NCCLS M11-A 6-2004 |
厭氧菌的抗菌易感性試驗方法 |
|
| ANSI/NCCLS NRSCL 13-A-2001 |
臨床試驗室參考系統:結果相符的方法和材料的證明和使用標準.接受的指南 |
The Reference System for the Clinical Laboratory: Criteria for Development and Credentialing of Methods and Materials for Harmonization of Results; Approved Guideline |
| ANSI/NCPDP MR V 3.01-2001 |
制造商折扣使用、計劃、配方及一籃子銷售標準格式.2.01版 |
Manufacturer Rebate Utilization, Plan, Formulary, and Market Basket Standard Format Version 2.01 |
| ANSI/NCPDP SC V 4.2-2001 |
藥方/藥劑師接口SCRIPT標準格式版本1.3 |
Prescriber/Pharmacist Interface SCRIPT Standard Format Version 1.3 |
| ANSI/NCPDP SCV 7.0-2005 |
處方者/藥劑師界面SCRIPT版本7.0 |
|
| ANSI/NCPDP SCV 7.0-2005 |
處方者/藥劑師界面SCRIPT版本7.0 |
|
| ANSI/NCPDP TC V 7.0-2001 |
電信標準格式.版本3發布證2 |
Telecommunication Standard Format, Version 3 Release 2 |
| ANSI/NCPDP TCVA.1-2004 |
電信標準版本A.1 |
|
| ANSI/NCPDP TCVB.0-2005 |
電信標準B.0版 |
|
| ANSI/NCSL Z 540-1-1994 |
校正.實驗室校正、測量和試驗設備.一般要求 |
Calibration -- Calibration Laboratories and Measuring and Test Equipment -- General Requirements |
| ANSI/NCSL Z 540-2-1997 |
測量不確定度表示的U.S.指南 |
U.S. Guide to the Expression of Uncertainty in Measurement |
| ANSI/NECA 102-2004 |
安裝鋁導管 |
|
| ANSI/NECA 111-2003 |
非金屬管道的安裝標準(RNC、ENT和LFNC) |
(Standard for Installing Nonmetallic Raceways (RNC, ENT and LFNC) ) |
| ANSI/NECA 200-2002 |
安裝和維護建設工地臨時電站的推薦規程 |
(Recommended Practice for Installing and Maintaining Temporary Electric Power at Construction Sites ) |
| ANSI/NECA 202-2001 |
安裝工業熱力系統的推薦規程 |
Recommended Practice for Installing Industrial Heat Tracing Systems |
| ANSI/NECA 230-2003 |
發動機安裝的推薦實施規范 |
(Recommended Practice for Installing Motors ) |
| ANSI/NECA 303-2005 |
閉路電視(CCTV)系統安裝標準 |
|
| ANSI/NECA 305-2001 |
火警系統操作規程 |
Fire Alarm System Job Practices |
| ANSI/NECA 400-1999 |
安裝和維修開關板的推薦操作規程 |
Recommended Practice for Installing and Maintaining Switchboards |
| ANSI/NECA 402-2001 |
安裝馬達控制中心的推薦操作規程 |
Recommended Practice for Installing Motor Control Centers |
| ANSI/NECA 405-2001 |
安裝和使用互連發生系統的推薦實施規程 |
Recommended Practice for Installing and Commissioning Interconnected Generation Systems |
| ANSI/NECA 407-2002 |
儀表板的安裝和維護的推薦性實施規程 |
(Recommended Practice for Installing and Maintaining Panelboards ) |
| ANSI/NECA 600-2003 |
安裝中壓電纜的推薦實施規程 |
(Recommended Practice for Installing Medium Voltage Cable ) |
| ANSI/NECA 605-2005 |
地下非金屬公用事業管道安裝的推薦規程 |
|
| ANSI/NECA 90-2004 |
住宅發電機組的安裝推薦實施規程 |
|
| ANSI/NECA/AA 104-2000 |
安裝鋁建筑線和電纜的推薦操作規程 |
Recommended Practice for Installing Aluminum Building Wire and Cable |
| ANSI/NECA/BICSI 568-2001 |
安裝電信電纜線路 |
Installing Telecommunications Cabling |
| ANSI/NEMA 250-2001 |
電氣設備外殼(最大1000伏特) |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
| ANSI/NEMA 61800-1-2002 |
可調速電力驅動系統.第1部分:一般要求.低壓可調速d.c.電力驅動系統的額定值規范 |
(Adjustable Speed Electrical Power Drive Systems - Part 1: General Requirements - Rating Specifications for Low Voltage Adjustable Speed d.c. Power Drive Systems ) |
| ANSI/NEMA AB 42000-2002 |
商用和工業用模壓箱式斷路器的檢驗和保護維修導則 |
Guidelines for Inspection and Preventive Maintenance of Molded Case Circuit Breakers Used in Commercial and Industrial Applications |
| ANSI/NEMA AB4-2004 |
商用和工業用模制外殼斷路器的檢驗和預防性技術保養的指南 |
|
| ANSI/NEMA AB42000-2002 |
商用和工業用模壓箱式斷路器的檢驗和保護維修導則 |
(Guidelines for Inspection and Preventive Maintenance of Molded Case Circuit Breakers Used in Commercial and Industrial Applications ) |
| ANSI/NEMA BU 1-1988 |
母線 |
Busways |
| ANSI/NEMA EW 3-1997 |
電弧焊接用半自動送絲系統 |
Semiautomatic Wire Feed Systems for Arc Welding |
| ANSI/NEMA EW 4-1993 |
電弧焊接和切割設備用圖形符號 |
Graphic Symbols for Arc Welding and Cutting Apparatus |
| ANSI/NEMA EW 8-1994 |
自動焊接件 |
Components of Robotic and Automatic Welding |
| ANSI/NEMA FB 11-1983 |
危險部位用針式和套筒式插頭、插座和連接器 |
Plugs, Receptacles, and Connectors of the Pin and Sleeve Type for Hazardous Locations |
| ANSI/NEMA FB-1-1997 |
導線管和電纜組件用配件、鑄造金屬箱和導線管體 |
Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit and Cable Assemblies |
| ANSI/NEMA FB-1-2003 |
導線管和電纜組件用配件、鑄造金屬箱和導線管體 |
(Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit and Cable Assemblies ) |
| ANSI/NEMA FI3-2004 |
用于電絕緣的蠟光芳族聚酰胺紙 |
|
| ANSI/NEMA FU1-2004 |
低壓管式熔斷體 |
|
| ANSI/NEMA GR 1-2001 |
接地棒和接地棒耦合 |
Ground Rods and Ground Rod Couplings |
| ANSI/NEMA HP 3-1997 |
ET型(250V)、E型(600V)和EE型(1000V)電和電子PTFE(聚四氟乙烯)絕緣高溫架空電線 |
Electrical and Electronic PTFE (Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire, Types ET (250 Volt), E (600 Volt) and EE (1000 Volt) |
| ANSI/NEMA HP 4-2000 |
KT型(250V)、K型(600V)和KK型(1000V)電和電子FEP(氟乙烯丙烯)絕緣高溫架空電線 |
Electrical and Electronic FEP (Fluorinated Ethylene Propylene)-Insulated High Temperature Hook-Up Wire, Types KT (250 Volt), K (600 Volt) and KK (1000 Volt) |
| ANSI/NEMA IAS 2.4-1996 |
程序控制器.第4部分:用戶指南 |
Programmable Controllers - Part 4: User Guidelines |
| ANSI/NEMA ICS 1-1993 |
工業控制設備和系統的通用標準 |
Industrial Control and Systems General Requirements |
| ANSI/NEMA ICS 10-1993 |
工業控制和系統交流轉換開關設備 |
Industrial Control and Systems AC Transfer Switch Equipment |
| ANSI/NEMA ICS 11-1995 |
工業流程測量和控制設備的電磁兼容性 |
Electromagnetic Compatibility for Industrial-Process Measurements and Control Equipment |
| ANSI/NEMA ICS 2 Edition-1993 |
額定值不超過交流2000V或直流750V的工業控制和系統控制器、壓力機和過載繼電器 |
Industrial Control and Systems Controllers, Contractors, and Overload Relays Rated Not More Than 2000 Volts AC or 750 Volts DC |
| ANSI/NEMA ICS 3-1993 |
工業控制設備和系統工廠生產組件 |
Industrial Control and Systems Factory Built Assemblies |
| ANSI/NEMA ICS 4-1993 |
工業用接線板 |
Terminal Blocks for Industrial Use |
| ANSI/NEMA ICS 5-1997 |
工業控制和系統控制流程和導向設備 |
Industrial Control and Systems Control Circuit and Pilot Devices |
| ANSI/NEMA ICS 6-1993 |
工業控制和系統附件 |
Industrial Control and Systems Enclosures |
| ANSI/NEMA ICS 7-1993 |
工業控制和系統可調速傳動裝置 |
Industrial Control and Systems Adjustable-Speed Drives |
| ANSI/NEMA ICS 7.1-1995 |
可調速傳動系統的選擇、安裝和操作指南和制造安全標準 |
Safety Standards for Construction and Guide for Selection, Installation, and Operation of Adjustable-Speed Drive Systems |
| ANSI/NEMA ICS 8-2001 |
工業控制和系統起重機控制器 |
Industrial Control and Systems Crane and Hoist Controllers |
| ANSI/NEMA KS 1-1990 |
封閉式和其他配電裝置開關(600V) |
Enclosed and Miscellaneous Distribution Equipment Switches (600 Volts) |
| ANSI/NEMA LD-3-2000 |
高壓裝飾電燈 |
High Pressure Decorative Laminates |
| ANSI/NEMA MG 1-1993 |
電動機和發電機 |
Motors and Generators |
| ANSI/NEMA MW 1000, Rev 1-1997 |
磁導線 |
Magnet Wire |
| ANSI/NEMA MW1000-2003 |
磁線 |
(Magnet Wire (includes all Revisions) ) |
| ANSI/NEMA OS 1-1996 |
薄鋼板制出線箱、器件箱、箱蓋和箱支架 |
Sheet-Steel Outlet Boxes, Device Boxes, Covers and Box Supports |
| ANSI/NEMA OS 2-1998 |
非金屬材料制出線箱、器件箱、箱蓋和箱支架 |
Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports |
| ANSI/NEMA OS1-2003 |
薄鋼板制出線箱、器件箱、箱蓋和箱支架 |
(Sheet-Steel Outlet Boxes, Device Boxes, Covers and Box Supports ) |
| ANSI/NEMA OS2-2003 |
非金屬材料制出線箱、器件箱、箱蓋和箱支架 |
(Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports ) |
| ANSI/NEMA PB 1-1990 |
配電盤 |
Panelboards |
| ANSI/NEMA PB 1.1-1996 |
額定電壓等于小于600V的配電盤的正確安裝、操作和維修的通用說明書 |
General Instructions for Proper Installation, Operation, and Maintenance of Panelboards Rated 600 Volts or Less |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com