標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM F 1476-1997 |
管道用裝襯墊的機械連接器的性能規范 |
Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ANSI/ASTM F 1494-2001 |
防護服裝的相關術語 |
Terminology Relating to Protective Clothing |
| ANSI/ASTM F 1499-2001 |
共擠制復合排水、排污、排氣管(DWV)的規范 |
Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DMV) (1) |
| ANSI/ASTM F 1504-1996 |
現有污水管和下水管修復用波紋聚氯乙烯管的規范 |
Specification for Folded Poly (Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
| ANSI/ASTM F 1508-1997 |
用于蒸汽、氣體和液體設備的角型減壓閥規范 |
Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services |
| ANSI/ASTM F 1533-2001 |
變形的聚乙烯內襯規范 |
Specification for Deformed Polyethylene (PE) Liner |
| ANSI/ASTM F 1534M-1996 |
襯墊材料水淋洗后燃燒試驗響應特性變化測定的試驗方法 |
Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials after Water Leaching |
| ANSI/ASTM F 1545-1996 |
有塑料內襯的鐵合金管、配件和法蘭的規范 |
Specification for Plastic-Lined Ferrous Metal Pipe, Fittings and Flanges |
| ANSI/ASTM F 1548-1997 |
管道用裝襯墊的機械連接件配件的性能規范 |
Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ANSI/ASTM F 1563-2001 |
聚乙烯(PE)燃?xì)夤艿罃D壓工具規范 |
Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing |
| ANSI/ASTM F 1567-1997 |
制造的或鑄造的自動清洗燃料油和潤滑油過濾器規范 |
Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
| ANSI/ASTM F 1577-2002 |
擺動門卡鎖的試驗方法 |
Test Methods for Detention Locks for Swinging Doors |
| ANSI/ASTM F 1588-1996 |
恒定拉伸載荷連接試驗的試驗方法 |
Test Method for Constant Tensile Load Joint Test (CTLJT) |
| ANSI/ASTM F 1589-1996 |
塑料管急速破裂擴展臨界壓力的測定試驗方法 |
Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe |
| ANSI/ASTM F 1592-1995 |
隔離用空心金屬可視系統試驗方法 |
Test Method for Detention Hollow Metal Vision Systems |
| ANSI/ASTM F 1606-1996 |
現存下水道和管道的聚乙烯(PE)內襯變形復原的實施規程 |
Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner |
| ANSI/ASTM F 1637-1997 |
安全行走表面的實施規程 |
Practice for Safe Walking Surfaces |
| ANSI/ASTM F 1643-2002 |
鎖銷式滑動門鎖裝置系統的試驗方法 |
Test Methods for Detention Sliding Door Locking Device Assembly |
| ANSI/ASTM F 1669M-1997 |
船用電氣系統用絕緣監視器規范(米制) |
Specification for Insulation Monitors for Shipboard Electrical Systems (Metric) |
| ANSI/ASTM F 1671-1997 |
用病毒穿透率的試驗系統測試防護服材料抗血液攜帶病原體滲透性的試驗方法 |
Test Method for Resistance of Protective Clothing Materials to Penetration by Blood-Borne Pathogens Using Viral Penetration as a Test System |
| ANSI/ASTM F 1673-1996 |
聚偏氟乙烯(PVDF)腐蝕廢物排放系統的規范 |
Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
| ANSI/ASTM F 1674-1996 |
聯接PVC管用的減震裝置的規范 |
Specification for Joint Restraint Products for Use with PVC Pipe |
| ANSI/ASTM F 1677-1997 |
使用便攜式可傾斜鉸鏈支桿滑動測試儀(PIAST)的試驗方法 |
Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST) |
| ANSI/ASTM F 1678-1997 |
使用便攜式鉸鏈支桿滑動測試儀(PAST)的測試方法 |
Test Method for Using a Portable Articulated Strut Slip Tester (PAST) |
| ANSI/ASTM F 1685-2000 |
空氣或氮系統減壓歧管規范 |
Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems |
| ANSI/ASTM F 1698-1996 |
現存排污管和管道修復用聚氯乙烯輪廓條襯里和水泥薄漿的安裝實施規程 |
Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ANSI/ASTM F 1716-1997 |
船用軟件系統的性能和轉換維護用指南 |
Guide for Transition and Performance of Marine Software Systems Maintenance |
| ANSI/ASTM F 1731-2000 |
消防和救援人員制服及其他隔熱保護服裝的人體測量與尺寸標注的實施規程 |
Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard |
| ANSI/ASTM F 1734-1996 |
為避免聚乙烯燃?xì)夤荛L(zhǎng)期受損用擠壓工具、管和擠壓工序組合的鑒定實施規程 |
Practice for Qualification of a Combination of Squeeze Tool, Pipe and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe |
| ANSI/ASTM F 1741-2002 |
現有排水溝和管道修復用機械螺旋纏繞聚氯乙烯(PVC)內襯管安裝的實施規范 |
Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits |
| ANSI/ASTM F 1750-1996 |
彩彈球槍加螺紋推進裝置接口規范 |
Specification for Paintball Gun Threaded Propellant Source Interface |
| ANSI/ASTM F 1752-1996 |
射箭弓弦用材料的試驗方法 |
Test Method for Archery Bow Component - Cord Material |
| ANSI/ASTM F 1753-1996 |
與箭弓一起使用的單鏡頭觀測鏡分類和標記規范 |
Specification for, Classification and Marking of Single Lens Scopes for Use with Archery Bows |
| ANSI/ASTM F 1756-1997 |
艦隊管理系統網絡實施指南 |
Guide for Implementation of a Fleet Management System Network |
| ANSI/ASTM F 1757-1996 |
計算機系統數字通訊協議指南 |
Guide for Digital Communication Protocols for Computerized Systems |
| ANSI/ASTM F 1759-1997 |
地下高密度聚乙烯人孔實施規程 |
Practice for HDPE Manholes for Subsurface Applications |
| ANSI/ASTM F 1760-2001 |
含有再加工-再生材料的聚氯乙烯無壓塑料管規范 |
Specification for Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content |
| ANSI/ASTM F 1776-2001 |
彩彈球運動用眼部保護裝置規范 |
Specification for Eye Protective Devices for Paintball Sports |
| ANSI/ASTM F 1786-1997 |
烤肉爐性能的試驗方法 |
Test Method for Performance of Rotisserie Ovens |
| ANSI/ASTM F 1799-1997 |
船上生成廢物管理審核的指南 |
Guide for Shipboard Generated Waste Management Audits |
| ANSI/ASTM F 1803-1997 |
基于可控內徑的聚氯乙烯封閉異形重力管的規范 |
Specification for Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter |
| ANSI/ASTM F 1804-1997 |
測定牽引裝配時聚乙烯氣管可允許抗拉荷載的實施規程 |
Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation |
| ANSI/ASTM F 1807-1999 |
Sdr9交聯聚乙烯管用的利用卷制銅環的金屬內插件規范 |
Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for Sdr9 Cross-Linked Polyethylene (Pex) Tubing |
| ANSI/ASTM F 1833-1997 |
跑鞋后腳運動控制特性對比試驗方法 |
Test Method for Comparison of Rearfoot Motion Control Properties of Running |
| ANSI/ASTM F 1836M-1997 |
填料管、尼龍和包裝配件規范(米制) |
Specification for Stuffing Tubes, Nylon; and Packing Assemblies (Metric) |
| ANSI/ASTM F 1837M-1997 |
熱縮電纜引入密封規范(米制) |
Specification for Heat-Shrink Cable Entry Seals (Metric) |
| ANSI/ASTM F 1870-2001 |
在滯留和校正設備中評定裝飾家具著火試驗方法的選擇指南 |
Guide for Selection of Fire Test Methods for Assessment of Upholstered Furnishings in Detention and Correctional Facilities |
| ANSI/ASTM F 1878-1998 |
護航船評價和選擇的指南 |
Guide for Escort Vessel Evaluation and Selection |
| ANSI/ASTM F 1887-1998 |
測量棒球和壘球回彈系數的試驗方法 |
Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs |
| ANSI/ASTM F 1888-1998 |
棒球和壘球受壓位移的試驗方法 |
Test Method for Compression-Displacement of Baseballs and Softballs |
| ANSI/ASTM F 1889-1998 |
箭桿平直度測量規范 |
Specification for Straightness Measurement of Arrow Shafts |
| ANSI/ASTM F 1890-2001 |
壘球棒效率測量的試驗方法 |
Test Method for Measuring Softball Bat Performance Factor |
| ANSI/ASTM F 1898-2001 |
睡袋易燃性試驗方法 |
Test Method for Flammability of Sleeping Bags |
| ANSI/ASTM F 1916-1998 |
拘役用帶涂層鏈節柵欄結構和圓柱的鏈節柵欄系統的選擇規范 |
Specifications for Selecting Chain Link Barrier Systems with Coated Chain Link Fence Fabric and Round Posts for Detention Applications |
| ANSI/ASTM F 1924-2001 |
外直徑可控聚乙烯氣體分布管及管道系統用塑料機械配件的規范 |
Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing |
| ANSI/ASTM F 1932-1998 |
睡袋紡織纖維回彈力測量的試驗方法 |
Test Method for Measuring Sleeping Bag Loft |
| ANSI/ASTM F 1933-1998 |
插圖說明背包式或登山用帳蓬觸地面積的規范 |
Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent |
| ANSI/ASTM F 1935-2001 |
測量背負或登山帳蓬的峰高試驗方法 |
Test Method for Measuring Peak Height of a Backpacking or Mountaineering Tent |
| ANSI/ASTM F 1936-1998 |
現場測量北美足球運動場地減震性能的規范 |
Specification for Shock-Absorbing of North American Football Playing Systems as Measured in the Field |
| ANSI/ASTM F 1961-1999 |
交聯聚乙烯(PEX)管用帶盤簧的金屬機械冷壓擴口式管接頭規范 |
Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing |
| ANSI/ASTM F 1962-1999 |
包括渡口在內的障礙物下聚乙烯管道更換時最大水平方向打眼的使用指南 |
Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings |
| ANSI/ASTM F 1963-1999 |
敞口式燃?xì)饣螂姷纳钣图邋佉?guī)范 |
Specification for Deep-Fat Fryers, Gas or Electric, Open |
| ANSI/ASTM F 1964-1999 |
壓力油炸器和鍋狀油炸器性能的試驗方法 |
Test Method for the Performance of Pressure and Kettle Fryers |
| ANSI/ASTM F 1965-1999 |
臺式爐性能的試驗方法 |
Test Method for the Performance of Deck Ovens |
| ANSI/ASTM F 1970-2001 |
壓力送水系統中使用的聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)專用工程配件或附屬品規范 |
Specification for Special Engineered PVC or CPVC Fittings or Appurtenances for Use in Systems Conveying Water Under Pressure |
| ANSI/ASTM F 1973-1999 |
聚乙烯(PE)燃料氣分配系統中工廠裝配的陽級冒口和過渡配件規范 |
Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems |
| ANSI/ASTM F 1974-2001 |
聚乙烯/鋁/聚乙烯和交聯聚乙烯/鋁/交聯聚乙烯復合壓力管用金屬內插件規范 |
Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe |
| ANSI/ASTM F 1979-1999 |
彩彈球運動用球的規范 |
Specification for Paintballs Used in the Sport of Paintball |
| ANSI/ASTM F 1986-2001 |
冷熱飲用水系統用復合管壓合配件和壓合接頭的規范 |
Specification for Composite Pipe Compression Fittings and Compression Joints for Hot and Cold Drinking Water Systems |
| ANSI/ASTM F 1987-2001 |
循環加熱系統用2型多層管、壓合配件和壓合接頭的規范 |
Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems |
| ANSI/ASTM F 1994-2000 |
船載固定泡沫滅火系統的試驗方法 |
Test Method for Shipboard Fixed Foam Firefighting Systems |
| ANSI/ASTM F 2001-2000 |
開發電子數據庫和船舶安全記錄用與容器有關的技術信息指南 |
Guide for Vessel Related Technical Information for Use in Developing An Electronic Database and Ship Safety Record |
| ANSI/ASTM F 2010-2000 |
通過改進的有孔游戲板試驗評定手套靈活性的試驗方法 |
Test Method for Evaluation of Glove Dexterity Using a Modified Pegboard Test |
| ANSI/ASTM F 2014-2000 |
管道設備用非增強擠制T形接頭規范 |
Specification for Non-Reinforced Extruded Tee Connections for Piping Applications |
| ANSI/ASTM F 2015-2000 |
搭接法蘭管端設備規范 |
Specification for Lap Joint Flange Pipe End Applications |
| ANSI/ASTM F 2018-2000 |
使用平應力拉伸樣品測定塑料老化時間的試驗方法 |
Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens |
| ANSI/ASTM F 2019-2000 |
抽出現場安裝的玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)已有管道的實施規程 |
Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) |
| ANSI/ASTM F 2021-2000 |
塑料虹吸式屋面排水系統設計和安裝的規范 |
Specification for Design and Installation of Plastic Syphonic Roof Drainage Systems |
| ANSI/ASTM F 2022-2001 |
輔助加熱器性能的試驗方法 |
Test Method for Performance of Booster Heater |
| ANSI/ASTM F 2023-2000 |
交聯聚乙烯(PEX)熱塑管耐氧化性評定的試驗方法 |
Test Method for Evaluating the Oxidative Resistance of PEX Thermoplastic Piping |
| ANSI/ASTM F 2030-2000 |
彩彈球柱體防爆盤組件規范 |
Specification for Paintball Cylinder Burst Disk Assemblies |
| ANSI/ASTM F 2031-2000 |
箭柄靜態韌性(勁度)的測量方法 |
Method of Measurement of Arrow Shaft Static Spine (Stiffness) |
| ANSI/ASTM F 2039-2000 |
船上職業衛生與健康和安全保護方案中基本要點指南 |
Guide for the Basic Elements of a Shipboard Occupational Health and Safety Program |
| ANSI/ASTM F 2041-2000 |
彩彈球標記警告規范 |
Specification for Paintball Marker Warnings |
| ANSI/ASTM F 2044-2000 |
液位指示電氣設備規范 |
Specification for Liquid Level Indicating Equipment, Electrical |
| ANSI/ASTM F 2045-2000 |
直接和間接讀取液位的管形玻璃和塑料觀測指示器規范 |
Specification for Indicators, Sight, Liquid Level, Direct/Indirect Reading, Tubular Glass/Plastic |
| ANSI/ASTM F 2046-2000 |
不同轉速計規范 |
Specification for Tachometers, Various |
| ANSI/ASTM F 2048-2000 |
防滑試驗結果報告的實施規程 |
Practice for Reporting Slip Resistance Test Results |
| ANSI/ASTM F 2053-2000 |
防護服材料的氣載粒子滲透試驗結果的文獻記錄指南 |
Guide For Documenting The Results Of Airborne Particle Penetration Testing Of Protective Clothing Materials |
| ANSI/ASTM F 2060-2001 |
冷季維護運動場草皮的指南 |
Guide for Maintaining Cool Season Turfgrasses on Athletic Fields |
| ANSI/ASTM F 2061-2000 |
化學防護服保養和維護說明的實施規程 |
Practice for Chemical Protective Clothing Care and Maintenance Instructions |
| ANSI/ASTM F 2070-2001 |
壓力和差動壓力電及光纖換能器規范 |
Specification for Transducers, Pressure and Differential Pressure, Electrical and Fiber Optic |
| ANSI/ASTM F 2071-2001 |
位置相近(非接觸式)或限值(機械接觸式)光纖開關規范 |
Specification for Switch, Position, Proximity (Non-Contact) or Limit (Mechanical Contact), Fiber Optic |
| ANSI/ASTM F 2075-2001 |
置于運動場設備下面和周圍的運動場安全表面用工程木纖維規范 |
Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment |
| ANSI/ASTM F 2087-2001 |
玻璃纖維編織繩和油繩的包裝實施規程 |
Practices for Packing, Fiberglass, Braided, Rope and Wick |
| ANSI/ASTM F 2092-2001 |
燃?xì)饣螂妼?duì)流爐規范 |
Specification for Convection Oven Gas or Electric |
| ANSI/ASTM F 2093-2001 |
擱架式烤爐的性能試驗方法 |
Test Method for the Performance of Rack Ovens |
| ANSI/ASTM F 2098-2001 |
保證SDR9交聯聚乙烯(PEX)管用金屬插件安全的不銹鋼夾子的試驗方法 |
Test Method for Stainless Steel Clamps for Securing SDR9 Cross-Linked Polyethylene (PEX) Tubing to Metal Insert Fittings |
| ANSI/ASTM F 2100-2001 |
醫用面罩材料的性能規范 |
Specification for Performance of Materials Used in Medical Face Masks |
| ANSI/ASTM F 2101-2001 |
使用金黃色葡萄球菌的生物氣溶膠評定醫用面罩材料細菌過濾效果(BFE)的試驗方法 |
Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus Aureus |
| ANSI/ASTM F 2106-2001 |
裝有發動機的人力蹋車設計和性能特征評定的試驗方法 |
Test Method for Evaluating Design and Performance Characteristics of Motorized Treadmills |
| ANSI/ASTM F 2107-2001 |
運動場沒有草皮部分的建造和維護指南 |
Guide for Construction and Maintenance of Skinned Areas on Sports Fields |
| ANSI/ASTM F 2115-2001 |
電動踏旋器試驗方法 |
Test Method for Motorized Treadmills |
| ANSI/ASTM F 2117-2001 |
球類運動場垂直回彈特性的試驗方法.聲學測量 |
Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement |
| ANSI/ASTM F 2120-2001 |
測試Treestand負荷能力的實施規程 |
Practice for Testing Treestand Load Capacity |
| ANSI/ASTM F 2121-2001 |
Treestand標簽實施規程 |
Practice for Treestand Labels |
| ANSI/ASTM F 2122-2001 |
Treestand和安全設備實施規程 |
Practice for Treestand and Safety Devices |
| ANSI/ASTM F 2123-2001 |
Treestand說明實施規程 |
Practice for Treestand Instructions |
| ANSI/ASTM F 2124-2001 |
梯形Treestand、三角形Treestand和提升木棍負荷能力試驗的實施規程 |
Practice for Testing Ladder Treestand, Tripod Treestand and Climbing Stick Load Capacity |
| ANSI/ASTM F 2125-2001 |
Treestand靜態穩定性的試驗方法 |
Test Method for Treestand Static Stability |
| ANSI/ASTM F 2126-2001 |
Treestand靜態負荷能力的試驗方法 |
Test Method for Treestand Static Load Capacity |
| ANSI/ASTM F 2127-2001 |
Treestand粘著力的試驗方法 |
Test Method for Treestand Adherence |
| ANSI/ASTM F 2128-2001 |
Treestand和反復荷載能力的試驗方法 |
Test Method for Treestand and Repetitive Loading Capability |
| ANSI/ASTM F 2130-2001 |
測量防護服材料對液體殺蟲劑的排斥性、抑制能力和滲透性的試驗方法 |
Test Method for Measure Repellency, Retention, and Penetration of Liquid Pesticide Formulation through Protective Clothing Materials |
| ANSI/ASTM F 2133-2001 |
測定鋼制船艙壁和甲板上大的碳?xì)浠衔锍攸c(diǎn)火效果的試驗方法 |
Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Marine Bulkheads and Decks, Constructed of Steel |
| ANSI/ASTM F 2135-2001 |
模制排水、污物和通風的短型塑料配件規范 |
Specification for Molded Drain Waste and Vent (DWV) Short-Pattern Plastic Fittings |
| ANSI/ASTM F 2138-2001 |
天然氣設備用超流量閥規范 |
Specification for Excess Flow Valves for Natural Gas Service |
| ANSI/ASTM F 2140-2001 |
食品保溫箱性能的試驗方法 |
Test Method for Performance of Hot Food Holding Cabinets |
| ANSI/ASTM F 2141-2001 |
Deli加熱箱性能試驗方法 |
Test Method for Performance of Hot Deli Cases |
| ANSI/ASTM F 2142-2001 |
抽屜式加熱器性能試驗方法 |
Test Method for Performance of Drawer Warmers |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com