標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D 1018-1991 |
石油餾分中氫含量的試驗方法 |
Test Method for Hydrogen in Petroleum Fractions (05.01) |
| ANSI/ASTM D 1025-1991 |
聚丁二烯中不揮發性殘?jiān)脑囼?yàn)方法 |
Test Method for Nonvolatile Residue of Polymerization Grade Butadiene (05.01) |
| ANSI/ASTM D 1034-1996 |
氟鉻砷酸鹽苯酚規范 |
Specification for Fluor-Chrome-Arsenate-Phenol |
| ANSI/ASTM D 1035-1996 |
氟鉻砷酸鹽苯酚化學分析的試驗方法 |
Test Methods for Chemical Analysis of Fluor-Chrome-Arsenate-Phenol |
| ANSI/ASTM D 1039-1994 |
用作電絕緣的玻璃膠合云母的試驗方法 |
Method of Testing Glass-Bonded Mica Used as Electrical Insulation (10.01) |
| ANSI/ASTM D 1043-1992 |
用扭力試驗方法對塑料作為溫度功能的硬度特性的試驗方法 |
Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test (08.01) |
| ANSI/ASTM D 1045-1995 |
塑料用增塑劑的取樣與試驗方法(08.01) |
Methods of Sampling and Test Plasticizers used in Plastics (08.01) |
| ANSI/ASTM D 1047-1995 |
電線及電纜用聚氯乙烯套管規范(10.01) |
Specification for Poly(Vinyl Cholride) Jacket for Wire and Cable (10.01) |
| ANSI/ASTM D 1067-2002 |
水的酸性和堿性試驗方法 |
Test Methods for Acidity or Alkalinity of Water |
| ANSI/ASTM D 1085-1965 |
石油和石油產品的計量方法 |
Gaging Petroleum and Petroleum Products, Method of (05.01) |
| ANSI/ASTM D 1091-1991 |
潤滑油和添加劑中磷含量的試驗方法 |
Test Methods for Phosphorus in Lubricating Oils and Additives (05.01) |
| ANSI/ASTM D 1092-1993 |
潤滑脂表觀粘度的試驗方法 |
Test Method for Apparent Viscosity of Lubricating Greases (05.01) |
| ANSI/ASTM D 1093-1985 |
蒸餾殘余物或烴液的酸性的試驗方法 |
Acidity of Distillation Residues or Hydrocarbon Liquids, Method of Test for (05.01) |
| ANSI/ASTM D 1094-1992 |
航空燃料水反應試驗方法 |
Water Reaction of Aviation Fuels, Method of Test for (05.01) |
| ANSI/ASTM D 1122-1998 |
用液體比重計測量發動機冷卻劑及其濃縮物比重的試驗方法 |
Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants by the Hydrometer |
| ANSI/ASTM D 1123-1999 |
卡爾.費歇爾試劑法測定發動機冷卻劑濃縮物中水含量的試驗方法 |
Test Method for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ANSI/ASTM D 1129-2002 |
與水有關的術語 |
Terminology Relating to Water |
| ANSI/ASTM D 115-1993 |
電絕緣用清漆的試驗方法 |
Test method for Varnishes Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 1157-1991 |
輕質烴中抑制劑總含量的試驗方法 |
Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons (05.01) |
| ANSI/ASTM D 1159-2001 |
用電勢滴定法測定石油餾分和商用脂肪族烯烴溴值的試驗方法 |
Bromine Number of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration, Test Method for (05.01) |
| ANSI/ASTM D 1160-2002 |
石油產品減壓蒸餾試驗方法 |
Test Method for Distillation of Petroleum Products at Reduced Pressures (05.01) |
| ANSI/ASTM D 1203-1994 |
采用活性碳方法對塑料揮發損失的試驗方法 |
Test Method for Volatile Loss from Plastics Using Activated Carbon Methods (08.01) |
| ANSI/ASTM D 1204-1994 |
非剛性熱塑片或膜在升高的溫度下線性規格變化的試驗方法 |
Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature (08.01) |
| ANSI/ASTM D 1217-1993 |
采用賓漢比重瓶對液體密度和比重的試驗方法 |
Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer (05.01) |
| ANSI/ASTM D 1218-1992 |
液態烴折射率和折射色散的試驗方法 |
Refractive Index and Refractive Dispersion of Hydrocarbon Liquids, Method of Test for (05.01, 10.03) |
| ANSI/ASTM D 1220-1965 |
立式圓筒形儲罐的測量和校準方法 |
Measurement and Calibration of Upright Cylindrical Tanks, Methods for (available as separate reprint only) (05.01, 05.02) |
| ANSI/ASTM D 1238-1994 |
利用擠壓式塑性計測試熱塑性塑料流率的試驗方法 |
Flow Rate of Thermoplastics by Extrusion Plastometer, Test Method for (08.01) |
| ANSI/ASTM D 1239-1992 |
用化學制劑測試萃取塑料薄膜阻力的方法 |
Test Method for Resistance of Plastic Films to Extraction by Chemicals (08.01) |
| ANSI/ASTM D 1242-1992 |
塑性材料抗磨損的試驗方法 |
Test Methods for Resistance of Plastic Materials to Abrasion (08.01) |
| ANSI/ASTM D 1243-1995 |
氯乙烯聚合物的稀溶液粘度的試驗方法 |
Test Method for Dilute Solutions Viscosity of Vinyl Chloride Polymers (08.01) |
| ANSI/ASTM D 1249-1992 |
辛基鄰苯二甲酸酯增塑劑規范 |
Specification for Octyl OrthoPhthalate Ester Plasticizers (X-153691) |
| ANSI/ASTM D 1250-1980 |
石油測量用表(由單頁表格組成.為獲得成套表格可同API或ASTM聯系) |
Petroleum Measurement Tables (consists of a single sheet listing of the tables. Contact API or ASTM for the complete tables.) (05.01, 10.03) |
| ANSI/ASTM D 1263-1994 |
機動車車輪軸承潤滑脂的泄漏傾向.(05.01)試驗方法 |
Leakage Tendencies of Automotive Wheel Bearing Greases, Method of Test for (05.01) |
| ANSI/ASTM D 1264-1987 |
潤滑脂的水沖洗特性的試驗方法(05.01) |
Test Method for Water Washout Characteristics of Lubricating Greases (05.01) |
| ANSI/ASTM D 1265-1992 |
液化石油氣取樣的實施規程(05.01) |
Practice for Sampling Liquefied Petroleum (LP) Gases (05.01) |
| ANSI/ASTM D 1266-1991 |
石油產品中硫的試驗方法(燈法)(05.01) |
Test Method for Sulfur in Petroleum Products (Lamp Method) (05.01) |
| ANSI/ASTM D 1267-1995 |
液化石油氣的蒸氣壓力(液化石油氣法).(05.01,05.05)試驗方法 |
Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method), Method of Test for (05.01, 05.05) |
| ANSI/ASTM D 127-1987 |
石油蠟(包括石油)滴落熔點的測試方法 |
Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum (05.01, 15.09) |
| ANSI/ASTM D 128-1994 |
潤滑油脂分析方法 |
Analysis of Lubricating Grease, Methods of (05.01) |
| ANSI/ASTM D 1287-1998 |
發動機冷卻劑和防銹劑的pH值的測試方法 |
Test Method for pH of Engine Coolants and Antirusts |
| ANSI/ASTM D 129-1995 |
石油產品中硫含量的試驗方法(一般氧彈法) |
Test Method for Sulfur in Petroleum Products (General Bomb Method) (05.01) |
| ANSI/ASTM D 1291-2001 |
與氯要求或水的需要或二者兼有的評價的操作規程 |
Practice for Estimation of Chlorine Requirement or Demand of Water, or Both |
| ANSI/ASTM D 1298-1985 |
原油和液化石油產品的密度、比重或API重力(比重計法).(05.01,10.03)試驗方法 |
Density, Specific Gravity, or API Gravity of Crude Petroleum and Liquid Petroleum Products (Hydrometer Method), Method of Test for (05.01, 10.03) |
| ANSI/ASTM D 130-1994 |
用銅片失去光澤試驗檢查石油產品對銅腐蝕性的測試方法 |
Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test, Method for (05.01, 06.04) |
| ANSI/ASTM D 1317-1989 |
新的及用過的潤滑劑中的氯(醇化鈉法).(05.01)試驗方法 |
Chlorine in New and Used Lubricants (Sodium Alcoholate Method), Method of Test for (05.01) |
| ANSI/ASTM D 1319-2002 |
用熒光指示劑吸附法測定液化石油產品中烴類的試驗方法 |
Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption, Test Method for (05.01) |
| ANSI/ASTM D 1321-1986 |
石蠟的針入度.(05.01,15.09)試驗方法 |
Needle Penetration of Petroleum Waxes, Method of Test for (05.01, 15.09) |
| ANSI/ASTM D 1322-1997 |
航空渦輪燃料的煙點.(05.01)試驗方法 |
Smoke Point of Aviation Turbine Fuels, Method of Test for (05.01) |
| ANSI/ASTM D 1356-2001 |
有關空氣取樣和分析的術語 |
Terminology Relating to Sampling and Analysis of Atmospheres |
| ANSI/ASTM D 1357-2001 |
大氣取樣規劃的實施規程 |
Practice for Planning the Sampling of the Ambient Atmosphere |
| ANSI/ASTM D 1367-1990 |
石墨的潤滑質量規范(05.01) |
Specifications for Lubricating Qualities of Graphites (05.01) |
| ANSI/ASTM D 1368-1989 |
主要參考燃料中鉛的濃度.(05.01)試驗方法 |
Concentrations of Lead in Primary Reference Fuels, Method of Test for (05.01) |
| ANSI/ASTM D 1384-1998 |
玻璃器皿中發動機冷卻劑腐蝕試驗的試驗方法 |
Test Method for Corrosion Test for Engine Coolants in Glassware |
| ANSI/ASTM D 1385-2001 |
水中水合肼的試驗方法 |
Test Method for Hydrazine in Water |
| ANSI/ASTM D 1394-1996 |
分析儀器和計算機系統間信息傳輸規范 |
Specification for Transferring Information between Clinical Instruments and Computer Systems |
| ANSI/ASTM D 1401-1995 |
石油和合成流體中水的可分離性的試驗方法(05.01) |
Test Method for Water Separability of Petroleum Oils and Synthetic Fluids (05.01) |
| ANSI/ASTM D 1403-1991 |
用四分之一和二分之一標度的錐度設備測定潤滑脂針入度的試驗方法(05.01) |
Test Method for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment (05.01) |
| ANSI/ASTM D 1404-1994 |
潤滑脂中有害顆粒的評價.(05.01)試驗方法 |
Estimation of Deleterious Particles in Lubricating Grease, Method for (05.01) |
| ANSI/ASTM D 1405-1995 |
航空燃料消耗的凈熱量的評價方法(05.01) |
Method for Estimation of Net Heat of Combustion of Aviation Fuels (05.01) |
| ANSI/ASTM D 1406-1965 |
水箱的校準(05.01) |
Liquid Calibration of Tanks (05.01) |
| ANSI/ASTM D 1407-1965 |
駁船的測量和校準.(05.01)試驗方法 |
Measurement and Calibration of Barges, Method for (05.01) |
| ANSI/ASTM D 1408-1965 |
球狀容器的測量和校準.(05.01)試驗方法 |
Measurement and Calibration of Spheres and Spheroids, Method for (05.01) |
| ANSI/ASTM D 1409-1965 |
油罐車的測量和校準(05.01) |
Measurement and Calibration of Tank Cars (05.01) |
| ANSI/ASTM D 1410-1965 |
水平水箱的測量和校準.(05.01)試驗方法 |
Measurement and Calibration of Horizontal Tanks, Method for (05.01) |
| ANSI/ASTM D 1429-1999 |
水和鹽水比重的試驗方法 |
Test Methods for Specific Gravity of Water and Brine |
| ANSI/ASTM D 1430-1991 |
聚氯三氟乙烯(PCTFE)塑料規范(08.01) |
Specification for Polychlorotrifluoroethylene (PCTFE) Plastics (08.01) |
| ANSI/ASTM D 1435-1994 |
塑料的抗戶外風化的實施規程 |
Practice for Outdoor Weathering of Plastics (08.01) |
| ANSI/ASTM D 1457-1992 |
聚四氟乙烯模塑和擠塑材料規范(08.01) |
Specification for Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials (08.01) |
| ANSI/ASTM D 1458-1997 |
電絕緣用完全硫化硅橡膠涂層的玻璃布與玻璃帶的試驗方法 |
Test Methods for Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation |
| ANSI/ASTM D 1459-1993 |
電絕緣用硅氧烷清漆玻璃布規范(10.01) |
Specification for Silicone Varnished Glass Cloth and for Electrical Insulation (10.01) |
| ANSI/ASTM D 1460-1996 |
基本衛生知識模數的定義和分配(醫療邏輯模數用Arden語法)規范 |
Specification for Defining and Sharing Modular Health Knowledge Bases (Arden Syntax for Medical Logic Modules) |
| ANSI/ASTM D 1465-1990 |
石蠟的燙印溫度.(05.01,15.09)試驗方法 |
Blocking Point of Petroleum Wax, Method of Test for (05.01, 15.09) |
| ANSI/ASTM D 1478-1991 |
滾珠軸承潤滑脂的低溫扭矩的試驗方法(05.01) |
Test Method for Low-Temperature Torque of Ball Bearing Greases (05.01) |
| ANSI/ASTM D 1480-1993 |
用BINGHAM比重計測定粘性材料的密度和相對密度(比重)的試驗方法(05.01) |
Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer (05.01) |
| ANSI/ASTM D 1481-1993 |
用LIPKIN雙毛細管比重計測定粘性材料的密度和相對密度(比重)的試驗方法(05.01) |
Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer (05.01) |
| ANSI/ASTM D 149-1995 |
固體電絕緣材料在工業電源頻率下的介電擊穿電壓和介電強度的試驗方法(10.01) |
Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies (10.01) |
| ANSI/ASTM D 1494-2001 |
增強塑料板的散射光傳遞因數的試驗方法 |
Test Method for Diffuse Light Transmission Factor of Reinforced Plastic Panels (08.01, 08.04) |
| ANSI/ASTM D 1499-1992 |
塑料曝光用光水曝露裝置(碳弧型)的操作規程(08.01) |
Practice for Operating Light-and Water-Exposure Apparatus (Carbon-Arc Type) for Exposure of Plastics (08.01) |
| ANSI/ASTM D 1500-1991 |
石油產品的ASTM顏色的試驗方法(05.01) |
Test Method for ASTM Color of Petroleum Products (05.01) |
| ANSI/ASTM D 1523-1995 |
90℃操作時電線和電纜用合成橡膠絕緣的規范(10.01) |
Specification for Synthetic Rubber Insulation for Wire and Cable, 90鳦 Operations (10.01) |
| ANSI/ASTM D 1525-1991 |
塑料的維卡軟化溫度的試驗方法(08.01) |
Test Method for Vicat Softening Temperature of Plastics (08.01) |
| ANSI/ASTM D 1531-1995 |
用液體排量法測定相對介電常數和功耗因數的試驗方法(10.01) |
Test Methods for Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures (10.01) |
| ANSI/ASTM D 1550-1994 |
ASTM丁二烯測量表(05.01) |
ASTM Butadiene Measurement Tables (05.01) |
| ANSI/ASTM D 1552-1995 |
石油產品中硫的試驗方法(高溫法)(05.01) |
Sulfur in Petroleum Products (High-Temperature Method), Method of Test for (05.01) |
| ANSI/ASTM D 1553-1990 |
用作潤滑劑的石墨的分析方法(05.01) |
Analysis of Graphites Used as Lubricants, Methods for (05.01) |
| ANSI/ASTM D 156-1994 |
石油產品的賽波特比色試驗方法(賽波特比色計法) |
Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) (05.01) |
| ANSI/ASTM D 1593-1992 |
非剛性氯乙烯塑料薄板的規范(08.01) |
Specification for Nonrigid Vinyl Chloride Plastic Sheeting (08.01) |
| ANSI/ASTM D 1600-1995 |
有關塑料的縮寫術語(08.01) |
Terminology for Abbreviated Terms Relating to Plastics (08.01) |
| ANSI/ASTM D 1601-1986 |
乙烯聚合物的稀釋溶液粘度的試驗方法(08.02) |
Dilute Solution Viscosity of Ethylene Polymers, Test Method for (08.02) |
| ANSI/ASTM D 1608-2001 |
燃?xì)猱a(chǎn)品中氮的氧化物的試驗方法(酚醛二磺酸法) |
Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedure) |
| ANSI/ASTM D 1622-1992 |
剛性泡沫塑料的表觀密度的試驗方法(08.02) |
Test Method for Apparent Density of Rigid Cellular Plastics (08.02) |
| ANSI/ASTM D 1655-1994 |
航空渦輪燃料的規范(05.01) |
Specification for Aviation Turbine Fuels (05.01) |
| ANSI/ASTM D 1657-1989 |
用壓力比重計測定輕烴類的密度或相對密度的試驗方法(05.01) |
Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer, Method of Test for (05.01) |
| ANSI/ASTM D 1662-1992 |
切割液中活性硫的試驗方法(05.01) |
Active Sulfur in Cutting Fluids, Method of Test for (05.01) |
| ANSI/ASTM D 1673-1994 |
電絕緣用膨脹多孔塑料的相對介電常數和功耗因數的試驗方法(10.01) |
Test Methods for Relative Permitivity and Dissipation Factor of Expanded Cellular Plastics Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 1675-1995 |
聚四氟乙烯管的試驗方法(10.01) |
Test Methods for Polytetrafluoroethylene Tubing (10.01) |
| ANSI/ASTM D 1687-2002 |
水中鉻的測試方法 |
Test Methods for Chromium in Water |
| ANSI/ASTM D 1693-2001 |
乙烯塑料的周?chē)鷳?yīng)力斷裂的試驗方法(08.01) |
Test Method for Environmental Stress-Cracking of Ethylene Plastics (08.01) |
| ANSI/ASTM D 1694-1987 |
纖維玻璃(玻璃纖維增強熱固樹脂)管螺紋(60-Deg.Stub)標準規范(08.04) |
Threads (60-Deg. Stub) for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe, Standard Specification for (08.04) |
| ANSI/ASTM D 1708-1997 |
用微型抗拉試樣測試塑料抗拉特性的試驗方法 |
Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens |
| ANSI/ASTM D 1709-2001 |
用自由落體法測定聚乙烯薄膜抗沖擊的試驗方法(08.02) |
Test Method for Impact Resistance of Polyethylene Film by the Free-Falling Dart Method (08.02) |
| ANSI/ASTM D 1710-1991 |
聚四氟乙烯基本型材、桿材和重壁管(08.02) |
Polytetrafluoroethylene (PTFE) Basic Shapes, Rod and Heavy-Walled Tubing (08.02) |
| ANSI/ASTM D 1711-1996 |
有關電絕緣的術語(10.01) |
Terminology Relating to Electrical Insulation (10.01) |
| ANSI/ASTM D 1712-1989 |
塑料耐硫化物侵蝕的試驗方法(08.02) |
Test Method for Resistance of Plastics to Sulfide Staining (08.02) |
| ANSI/ASTM D 1739-2001 |
落塵的收集和測量的試驗方法(可沉淀顆粒物質) |
Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ANSI/ASTM D 1740-1991 |
航空渦輪燃料光度計數目的試驗方法(05.01) |
Test Method for Luminometer Numbers of Aviation Turbine Fuels (05.01) |
| ANSI/ASTM D 1742-1994 |
存儲期間油和潤滑脂分離的試驗方法(05.01) |
Oil Separation from Lubricating Grease during Storage, Test Method for (05.01) |
| ANSI/ASTM D 1743-1987 |
潤滑脂防腐蝕特性的試驗方法(05.01) |
Corrosion Prevention Properties of Lubricating Greases, Method of Test for (05.01) |
| ANSI/ASTM D 1746-1997 |
塑料薄板的透明度的試驗方法(X-40-3)(08.02) |
Test Method for Transparency of Plastic Sheeting (X-40-3) (08.02) |
| ANSI/ASTM D 1747-1994 |
粘性材料折射率的試驗方法(05.01) |
Test Method for Refractive Index of Viscous Materials (05.01) |
| ANSI/ASTM D 1748-1983 |
在潮濕室測定金屬保護劑的防銹性的試驗方法(05.01) |
Rust Protection by Metal Preservatives in the Humidity Cabinet, Method of Test for (05.01) |
| ANSI/ASTM D 1755-2001 |
聚氯乙烯樹脂規范(08.02) |
Specification for Poly(Vinyl Chloride) Resins |
| ANSI/ASTM D 1758-1996 |
用木樁現場試驗評定木材防腐劑的試驗方法 |
Test Method for Evaluating Wood Preservatives by Field Tests with Stakes |
| ANSI/ASTM D 1760-2001 |
木材產品的壓力處理規范 |
Specification for Pressure Treatment of Timber Products |
| ANSI/ASTM D 1763-1994 |
環氧樹脂規范(08.01) |
Specification for Epoxy Resins (08.01) |
| ANSI/ASTM D 1784-1992 |
剛性聚氯乙烯合成物規范(08.02,08.04) |
Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds (08.02, 08.04) |
| ANSI/ASTM D 1785-1999 |
聚氯乙烯(PVC)塑料管規范.表40、80和120 |
Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 |
| ANSI/ASTM D 1786-2001 |
甲苯二異氰酸鹽規范 |
Toluenedisocyanate, Specifications for (08.02) |
| ANSI/ASTM D 1790-1994 |
用沖擊法測定塑料薄板的脆化溫度的試驗方法(08.01) |
Test Method for Brittleness Temperature of Plastic Sheeting by Impact (08.01) |
| ANSI/ASTM D 1796-1983 |
用分離法測定原油和燃料油中水和沉淀的試驗方法(05.01) |
Test for Water and Sediment in Crude Oils and Fuel Oils by Centrifuge, Method of (05.01) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com