標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D 5763-1995 |
通用的玻璃制品齒輪油氧化和熱穩定特性的試驗方法 |
Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware (05.03) |
| ANSI/ASTM D 5770-1996 |
用半定量法微觀測定已用潤滑油酸值的試驗方法 |
Test Method for Semi-Quantitative Micro Determination of Acid Number of Used Lubricating Oils |
| ANSI/ASTM D 5771-1996 |
石油產品始凝點的試驗方法.光學檢測逐級降溫法 |
Test Method for Cloud Point of Petroleum Products - Optical Detection Stepped Cooling Method |
| ANSI/ASTM D 5772-1996 |
石油產品始凝點的試驗方法.線性冷卻率法 |
Test Method for Cloud Point of Petroleum Products - Linear Cooling Rate Method |
| ANSI/ASTM D 5797-1997 |
汽車火花點火發動機用燃料甲醇(M85-M70)規范 |
Specification for Fuel Methanol (M85-M70) for Automotive Spark-Ignition Engines |
| ANSI/ASTM D 5802-1995 |
吸水紙制品吸附作用的試驗方法(用重力原理測定吸附率和容量) |
Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles) |
| ANSI/ASTM D 5803-1997 |
零檔上濕張力強度的試驗方法(濕零檔張力) |
Test Method for Wet Tensile Strength at Zero-Span (Wet Zero-Span Tensile) |
| ANSI/ASTM D 5804-1997 |
零檔制動強度的試驗方法(干零檔張力) |
Test Methods for Zero-Span Breaking Strength (Dry Zero-Span Tensile) |
| ANSI/ASTM D 581-1989 |
液體用玻璃纖維增強型結構中使用的熱固樹脂的抗化學藥物的測定規程 |
Determining Chemical Resistance of Thermosetting Resins Used in Glass Fiber-Reinforced Structures Intended for Liquid Service, Practice for (07.02) |
| ANSI/ASTM D 5827-1998 |
用離子色譜法測定發動機冷卻劑中氯化物的試驗方法 |
Test Method for Determination of Chloride in Engine Coolant by Ion Chromatography |
| ANSI/ASTM D 5828-1998 |
輔助冷卻添加劑(SCAs)和發動機冷卻濃縮劑兼容性的試驗方法 |
Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
| ANSI/ASTM D 5844-1998 |
評價抑制生銹用汽車發動機油的試驗方法(序列IID) |
Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) |
| ANSI/ASTM D 5845-1996 |
用紅外線光譜法測定汽油中MTBE、ETBE、TAME、DIPE、甲醇、乙醇和叔丁醇的試驗方法 |
Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and Tert-Butanol in Gasoline by Infrarred Spectroscopy |
| ANSI/ASTM D 5847-2001 |
水分析標準試驗方法的質量控制規范編寫規則 |
Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis |
| ANSI/ASTM D 5857-2002 |
采用ISO協議和方法的聚酯塑料注入和擠壓材料的規范 |
Specification for Propylene Plastic Injection and Extrusion Materials Using ISO Protocol and Methodology |
| ANSI/ASTM D 5904-2001 |
通過紫外線、過硫酸鹽氧化物和薄膜電導率檢測對水中全部碳、有機碳和無機碳的試驗方法 |
Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ANSI/ASTM D 5907-2001 |
對水中可過濾和不可過濾物質的試驗方法 |
Test Method for Filterable and Nonfilterable Matter in Water |
| ANSI/ASTM D 5926-2001 |
排水管、排廢水和排氣管(DWV)、下水溝、衛生設施和暴雨管道系統用聚氯乙烯墊圈的規范 |
Specification for PolyVinyl Chloride (PVC) Gaskets for Drain, Waste and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems |
| ANSI/ASTM D 5931-1998 |
用數字密度計測定發動機冷凍劑濃縮物和含水發動機冷凍劑的密度和相對密度的試驗方法 |
Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ANSI/ASTM D 5934-1997 |
用三點彎曲法測定在裝載控制速度下剛性和半剛性塑料樣品的彈性模量的試驗方法 |
Test Method for Determination of the Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three Point Bending |
| ANSI/ASTM D 5947-2001 |
固體塑料樣品物理尺寸的試驗方法 |
Test Methods for Physical Dimensions of Solid Plastics Specimens |
| ANSI/ASTM D 5949-2001 |
石油產品的傾點試驗方法(自動壓力脈沖法) |
Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method) |
| ANSI/ASTM D 5950-2002 |
石油產品的傾點試驗方法(自動傾斜法) |
Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) |
| ANSI/ASTM D 596-2001 |
水分析報告結果的操作規程 |
Practice for Reporting Results of Analysis of Water |
| ANSI/ASTM D 5966-1999 |
評定輕型柴油發動機中滾輪從動桿防磨損用發動機油的試驗方法 |
Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine |
| ANSI/ASTM D 5969-1997 |
在稀釋合成海水的情況下測定潤滑脂防腐蝕性能的試驗方法 |
Test Method for Corrosion Preventive Properties of Lubricating Greases in the Presence of Dilute Synthetic Sea Water Environments |
| ANSI/ASTM D 5983-1997 |
汽車火花點火發動機燃料用順向混合甲基特丁基乙醚(MTBE)規范 |
Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending with Automotive Spark Ignition Fuel |
| ANSI/ASTM D 5984-1997 |
利用顯色指示劑滴定法測試石油產品堿值的半定量現場試驗法的試驗方法 |
(includes change in title) Test Method for Semi-Quantitative Field Test Method for Base Number in Petroleum Products by Color-Indicator Titration |
| ANSI/ASTM D 5985-2002 |
石油產品的傾點試驗方法(旋轉法) |
Test Method for Pour Point of Petroleum Products (Rotational Method) |
| ANSI/ASTM D 5986-1997 |
用氣相色譜/傅里葉轉換遠紅外線光譜測定用完的汽油中C8-C12芳香族和總芳香族、甲苯、苯、氧化物的試驗方法 |
Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy |
| ANSI/ASTM D 5988-1997 |
測定混合后的殘留塑料材料或塑料材料廢物中有氧生物降解的試驗方法 |
Test Method for Determining the Aerobic Biodegradation of Soil of Plastic Materials or Residual Plastic Materials After Composing |
| ANSI/ASTM D 5991-1997 |
聚乙烯對酞酰小片中聚氯乙烯雜質分離和鑒定的實施規程 |
Practice for Separation and Identification of Poly(Viny Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake |
| ANSI/ASTM D 6011-2001 |
測定聲波測速計/溫度計性能的試驗方法 |
Test Method for Determining the Performance of a Sonic Anemometer/Therometer |
| ANSI/ASTM D 6021-1996 |
通過復合頂部空間抽提和硫特定檢測的殘余燃料的總硫化氫測量方法 |
Test Method for the Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection |
| ANSI/ASTM D 6022-2001 |
永久剪切穩定性指數計算的實施規范 |
Practice for the Calculation of Permanent Shear Stability Index |
| ANSI/ASTM D 6040-2001 |
非燒結的PTFE擠壓膜的標準試驗方法指南 |
Guide to Standard Test Methods for Unsintered Polytetrafluorethylene (PTFE) Extruded Film or Tape |
| ANSI/ASTM D 6056-2001 |
用傳輸電子顯微鏡檢查法測定工作環境空氣中單晶陶瓷晶須濃度的試驗方法 |
Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy |
| ANSI/ASTM D 6057-2001 |
用相襯顯微鏡檢查法測定工作環境空氣中單晶陶瓷晶須濃度的試驗方法 |
Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy |
| ANSI/ASTM D 6058-2001 |
測定工作環境空氣中單晶陶瓷晶須濃度的實施規程 |
Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment |
| ANSI/ASTM D 6059-2001 |
用掃描電子顯微鏡檢查法測定工作環境空氣中單晶陶瓷晶須濃度的試驗方法 |
Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy |
| ANSI/ASTM D 6060-2001 |
用便攜式氣相色層分析儀進行工藝通風孔取樣的實施規程 |
Practice for Sampling of Process Vents with a Portable Gas Chromatograph |
| ANSI/ASTM D 6061-2001 |
評價呼吸式氣溶膠采樣器性能的實施規程 |
Practice for Evaluating the Performance of Respirable Aerosol Samplers |
| ANSI/ASTM D 6062M-2001 |
與健康有關的氣溶膠成份的個人采樣器的指南 |
Guide for Personal Samplers of Health-Related Aerosol Fractions (Metric) |
| ANSI/ASTM D 6064-1997 |
1,1,1,2,3,3,3-庚熒光丙烷(Cf3 chfcf3)1、Hfc-227ea規范 |
Specification for Hfc-227ea, 1, 1, 1, 2, 3, 3, 3-Heptafluoropropane (Cf3 Chfcf3)1 |
| ANSI/ASTM D 6068-1996 |
測定塑料材料的J-R彎曲的試驗方法 |
Test Method for Determining J-R Curves of Plastic Materials |
| ANSI/ASTM D 6091-2001 |
可乎略校正錯誤的分析方法的99%95%試驗室內檢測評估操作規程 |
Practice for 99%/95% Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error |
| ANSI/ASTM D 6097-2001 |
固體電介絕緣材料中有孔的水柱增高的相對抗性的試驗方法 |
Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials |
| ANSI/ASTM D 6098-1997 |
由聚碳酸酯制成的擠壓鑄模型材規范 |
Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) |
| ANSI/ASTM D 6099-1997 |
聚氨酯原材料的試驗方法:中等酸度至高酸度芳香異氰酸酯酸度的測定 |
Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates |
| ANSI/ASTM D 6100-1997 |
擠壓鑄模和噴射鑄模乙縮醛型材規范 |
Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (Pom) |
| ANSI/ASTM D 6107-1998 |
用于照明裝置的發動機冷卻劑用防漏添加劑規范 |
Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service |
| ANSI/ASTM D 611-2001 |
石油產品和烴溶劑的混合苯胺點和苯胺點的試驗方法 |
Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents, Method of Test for (05.01, 06.04, 10.03) |
| ANSI/ASTM D 612-1988 |
石蠟中可碳化物質的試驗方法 |
Carbonizable Substances in Paraffin Wax, Method of Test for (05.01, 15.09) |
| ANSI/ASTM D 6120-1997 |
室溫下陽極和陰極碳材料電阻的試驗方法 |
Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature |
| ANSI/ASTM D 6122-2001 |
多變量過程紅外分光光度計確認規則 |
Practice for Validation of Multivariate Process Infrared Spectrophotometers |
| ANSI/ASTM D 6129-1998 |
原子吸收光譜法測定發動機冷卻劑濃縮物中硅的試驗方法 |
Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
| ANSI/ASTM D 613-2001 |
用十六烷法對柴油機燃料引燃質量的試驗方法 |
Diesel Fuels by the Cetane Method, Test for Ignition Quality of (05.04) |
| ANSI/ASTM D 6130-1998 |
感應耦合等離子-原子發散光譜法測定發動機冷卻劑中硅和其它素的試驗方法 |
Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ANSI/ASTM D 6139-2000 |
潤滑劑或其組分需氧水生生物降解測定的標準Gledhill搖動燒瓶試驗法 |
Standard Gledhill Shake Flask Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or their Components |
| ANSI/ASTM D 6176M-1997 |
用電氣溫度感應器測量表面大氣溫度的操作規程 |
Practice for Measuring Surface Atmospheric Temperature with Electrical Temperature Sensors [Metric] |
| ANSI/ASTM D 6177-1997 |
由床上用品散發的揮發性有機化學物質擴散曲線測定的操作規程 |
Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets |
| ANSI/ASTM D 6178-1997 |
由床上用品散發的揮發性有機化學物質測定的操作規程 |
Practice for Estimation of Short-Term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets |
| ANSI/ASTM D 618-1995 |
測試用電絕緣材料和調和塑料的實施規程 |
Practice for Conditioning Plastics and Electrical Insulating Materials for Testing (08.01) |
| ANSI/ASTM D 619-1994 |
電絕緣用硬化纖維的試驗方法 |
Test Methods for Vulcanized Fibre Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 6194-1997 |
材料的熱絲點火試驗方法 |
Test Method for Glow-Wire Ignition of Materials |
| ANSI/ASTM D 6196-1997 |
對空氣中揮發性有機化合物的吸附劑和抽吸取樣/熱解吸分析過程選擇的操作規程 |
Practice for Selection of Sorbents and Pumped Sampling/Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air |
| ANSI/ASTM D 6200-2001 |
冷卻曲線分析法測定淬火油冷卻特性的試驗方法 |
Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
| ANSI/ASTM D 6201-1997 |
進油閥用火花點燃式發動機無鉛燃料沉積物形成的功率計評定試驗方法 |
Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Value Deposit Formation |
| ANSI/ASTM D 6202-1997 |
測定載有火花點燃式發動機的小轎車和輕型卡車的汽車發動機油節油效果的試驗方法 |
Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence via Spark Ignition Engine |
| ANSI/ASTM D 6203-1997 |
導軌潤滑劑熱穩定性的試驗方法 |
Test Method for Thermal Stability of Way Lubricants |
| ANSI/ASTM D 6209-1997 |
大氣中氣態的或顆粒態的多環芳香烴測定的試驗方法(用氣相色譜/質譜分析在加襯吸附劑的過濾器上收集) |
Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
| ANSI/ASTM D 6224-1998 |
輔助動力裝置用潤滑油的使用監測實施規范 |
Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ANSI/ASTM D 6239-2001 |
通過高分辨率α液體閃爍光譜測定法對飲用水中鈾的試驗方法 |
Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry |
| ANSI/ASTM D 6245-2001 |
用室內二氧化碳濃度法評價室內空氣質量和通風的指南 |
Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation |
| ANSI/ASTM D 6246-2001 |
評價擴散采樣器性能的實施規程 |
Practice for Evaluating the Performance of Diffusive Samplers |
| ANSI/ASTM D 6247-1998 |
通過X射線熒光光譜法對聚烯烴中素含量分析的試驗方法 |
Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry |
| ANSI/ASTM D 6248-1998 |
用遠紅外線分光光度法對聚乙烯中橫向非飽和性和乙烯的試驗方法 |
Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ANSI/ASTM D 6258-1998 |
柴油燃料中溶劑紅164燃料濃度測定的試驗方法 |
Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels |
| ANSI/ASTM D 6259-1998 |
定量的沉積限值測定的實施規程 |
Practice for Determination of a Pooled Limit of Quantitation |
| ANSI/ASTM D 6260-1998 |
尼龍材料中碳黑的重量計測定的試驗方法 |
Test Method for Gravimetric Determination of Carbon Black in Nylon Materials |
| ANSI/ASTM D 6261-1998 |
由熱塑聚酯做成的擠壓,壓縮注模基本型材的標準規范 |
Standard Specification for Extruded, Compressed Molded Basic Shapes Made from Thermoplastic Polyester (TPES)1 |
| ANSI/ASTM D 6262-1998 |
擠壓和壓縮注�；拘筒牡臉藴室�(guī)范 |
Standard Specification for Extruded, Compressed Molded and Injection Molded Basic Shapes of Peek (PEEK)1 |
| ANSI/ASTM D 6263-1998 |
由硬質聚乙烯和聚氯乙烯制造的擠壓棍和棒的標準規范 |
Standard Specification for Extruded Rods and Bars Made from Rigid Poly(Vinyl Chloride) (PVC), and Chlorinated Poly(Vinyl Chloride) (CPVC)1 |
| ANSI/ASTM D 6265-1998 |
使用擠壓機過濾器試驗的聚合物污染物分離操作規程 |
Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test |
| ANSI/ASTM D 6271-1998 |
評價環境中煙草煙排放的基于茄呢醇的可吸入顆粒物的試驗方法 |
Test Method for Estimating contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol |
| ANSI/ASTM D 6272-1998 |
通過四點結合對電氣絕緣材料和非強化及強化塑料的柔韌特性的試驗方法 |
Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending |
| ANSI/ASTM D 6277-2001 |
用中紅外光譜測定法測定火花式點燃發動機燃料中苯的試驗方法 |
Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid-Infrared Spectroscopy |
| ANSI/ASTM D 6289-1998 |
注模熱固塑料的注模尺寸收縮測量的試驗方法 |
Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics |
| ANSI/ASTM D 6290-1998 |
塑料板顏色測定的試驗方法 |
Test Method for Color Determination of Plastic Pellets |
| ANSI/ASTM D 6299-1998 |
評估分析測量系統性能的應用統計質量保證實施規范 |
Practice for Applying Statistical Quality Assurance Techniques to Evaluate Analytical Measurement System Performance |
| ANSI/ASTM D 6304-1998 |
利用庫侖卡爾.費歇爾滴定法測定石油產品、潤滑油、添加劑中水含量的試驗 方法 |
Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration |
| ANSI/ASTM D 6306-2001 |
監測室內空氣中氣體污染物用擴散控制無源監測器的布置和使用指南 |
Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air |
| ANSI/ASTM D 6326-2001 |
U.S.系列等動力懸浮沉積物取樣器的最大通過率比和深度的選擇規程 |
Practice for the Selection of Maximum Transit-Rate Ratios and Depths for the U. S. Series of Isokinetic Suspended-Sediment Samplers |
| ANSI/ASTM D 6327-2001 |
通過過濾器活性取樣測定室內空氣中氡衰變產品濃度和工作環境等級的試驗方法 |
Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter |
| ANSI/ASTM D 6328-2001 |
化學分析空氣中沉積物的質量保證協議指南 |
Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric West Deposition |
| ANSI/ASTM D 6329-2001 |
確定用靜態環境室評價支持微生物生長的室內物質的能力的方法指南 |
Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers |
| ANSI/ASTM D 6330-2001 |
在規定的試驗條件下用小型環境試驗室測定從木制板材中排放的揮發性有機物(甲醛除外)的實施規程 |
Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions |
| ANSI/ASTM D 6331-2001 |
在低濃度下測定固定源排放的顆粒物濃度的試驗方法(人工重量分析法) |
Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method) |
| ANSI/ASTM D 6332-2001 |
測量一氧化碳檢測器對氣體和蒸氣的動態反應的試驗系統指南 |
Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors |
| ANSI/ASTM D 6333-2001 |
樓板中沉積的農藥殘留物的收集實施規程 |
Practice for Collection of Dislodgeable Pesticide Residues from Floors |
| ANSI/ASTM D 6345-2001 |
空氣中揮發性有機化合物的活性、綜合性取樣的選擇指南 |
Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air |
| ANSI/ASTM D 6348-2001 |
通過直接萃取界面傅里葉變換紅外線光譜法測定氣體化合物的試驗方法 |
Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy |
| ANSI/ASTM D 635-1998 |
水平位置自支撐式塑料的燃燒率和/或燃燒程度與時間的試驗方法 |
Test Method for Rate of Burning and/or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (08.01) |
| ANSI/ASTM D 6362-2001 |
水質分析標準物質認證規則 |
Practice for Certificates of Reference Materials for Water Analysis |
| ANSI/ASTM D 6363-2001 |
用過氧化物酶熒光法測定大氣水樣中過氧化氫和合成有機過氧化物的試驗方法 |
Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method |
| ANSI/ASTM D 637-1990 |
平透明塑料薄板的表面不平整性的試驗方法 |
Test Method for Surface Irregularities of Flat Transparent Plastic Sheets |
| ANSI/ASTM D 638-2001 |
塑料拉伸性能的試驗方法 |
Test Method for Tensile Properties of Plastics (08.01) |
| ANSI/ASTM D 6394-2001 |
磺基塑料規范 |
Specification for Sulfone Plastics |
| ANSI/ASTM D 6399-2001 |
測量機艙中空氣質量的儀器和方法的選擇指南 |
Guide for Guide for Selecting Instruments and Methods for Measuring Air Quality in Aircraft Cabins |
| ANSI/ASTM D 6420-2001 |
用直接界面氣相色譜法和質譜法測定氣體有機化合物的試驗方法 |
Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry |
| ANSI/ASTM D 6421-1999 |
通過對電子孔燃料注射器污渣對自動火花點火引擎燃料的試驗方法 |
Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure |
| ANSI/ASTM D 6422-1999 |
汽油酒精混合物的耐水性的試驗方法 |
Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends |
| ANSI/ASTM D 6423-1999 |
變性燃料酒精,燃料酒精和酒精的PHE測定的試驗方法 |
Test Method for Determination of the PHE of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85) |
| ANSI/ASTM D 6424-1999 |
辛烷自燃通風火花點火飛行器引擎的操作規程 |
Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines |
| ANSI/ASTM D 6425-1999 |
使用SRV試驗機器的EP潤滑油摩擦和磨損特性測量的試驗方法 |
Test Method for Measuring Friction and Wear Properties of EP Lubricating Oils Using the SRV Test Machine |
| ANSI/ASTM D 6426-1999 |
餾出物燃料油的濾過性測定的試驗方法 |
Test Method for Determining Filterability of Distillate Fuel Oils |
| ANSI/ASTM D 6435-1999 |
塑料成材和型材剪切特性的試驗方法 |
Test Method for Shear Properties of Plastic Lumber and Shapes |
| ANSI/ASTM D 6436-1999 |
ASTM特性的報告指南 |
Guide for Reporting of ASTM Properties |
| ANSI/ASTM D 6439-1999 |
蒸氣,氣體和水電潤滑渦輪潤滑系統的清潔,涌流和純化指南 |
Guide for Cleaning, Flushing and Purification of Steam, Gas and Hydroelectric Turbine Lubrication Systems |
| ANSI/ASTM D 6444-1999 |
用波長散射X射線熒光法測定汽油中硫的試驗方法 |
Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com