標準號 |
中文名稱 |
英文名稱 |
| ANSI/IEEE 1584-2002 |
電弧閃光危害計算的實施導則 |
(Guide for Performing Arc Flash Hazard Calculations ) |
| ANSI/IEEE 1584a-2004 |
電弧閃光危害計算的的實施指南.修改件 |
|
| ANSI/IEEE 1585-2002 |
電壓波動的補償用中等電壓(1-35kV)系列電子設備的功能規范指南 |
(Guide for the Functional Specification of Medium Voltage (1 - 35 kV) Electronic Series Devices for Compensation of Voltage Fluctuations ) |
| ANSI/IEEE 1588-2002 |
網絡測量和控制系統用精密時鐘同步協議 |
(Precision Clock Synchronization Protocol for Networked Measurement and Control Systems ) |
| ANSI/IEEE 1596-1992 |
可伸縮一致界面(SCI) |
Scalable Coherent Interface (SCI) |
| ANSI/IEEE 1596.5-1993 |
可伸縮一致界面處理機的共享數據格式優化 |
Shared Data Formats Optimized for Scalable Coherent Interface Processors |
| ANSI/IEEE 16-2004 |
軌道車輛的電氣和電子控制器具標準 |
|
| ANSI/IEEE 16-2004 |
軌道車輛的電氣和電子控制器具標準 |
|
| ANSI/IEEE 1613-2003 |
電力變電站中通信網絡裝置的標準環境和檢驗要求 |
(Standard Environmental and Testing Requirements for Communications Networking Devices in Electric Power Substations ) |
| ANSI/IEEE 1616-2004 |
機動車工作狀態數據記錄器(MVEDR)標準 |
|
| ANSI/IEEE 162-1963 |
電子數字計算機術語的定義 |
(Electronic Digital Computers, Definitions of Terms for) |
| ANSI/IEEE 1620-2004 |
有機晶體管和材料的特性的試驗方法標準 |
|
| ANSI/IEEE 1621-2004 |
辦公室/用戶環境中使用的電子裝置的電力控制中的用戶接口件標準 |
|
| ANSI/IEEE 1623-2004 |
動態電壓補償用中壓(1 kV至35 kV)電子分流裝置的功能規范指南 |
|
| ANSI/IEEE 1623-2004 |
動態電壓補償用中壓(1 kV至35 kV)電子分流裝置的功能規范指南 |
|
| ANSI/IEEE 1625-2004 |
便攜式計算機用可再充電電池 |
|
| ANSI/IEEE 1641-2004 |
信號和試驗定義標準 |
|
| ANSI/IEEE 1646-2004 |
電力變電所自動化用標準通訊傳輸時間性能要求 |
|
| ANSI/IEEE 165-1977 |
模擬計算機術語定義 |
(Analog Computers, Definitions of Terms for) |
| ANSI/IEEE 166-1977 |
混合計算機連接件術語的定義 |
(Hybrid Computer Linkage Components, Definitions of Terms for) |
| ANSI/IEEE 167A.2-1996 |
標準傳真圖.高對比度 |
(Standard Facsimile Chart - High Contrast (Gray Scale)) |
| ANSI/IEEE 18-2002 |
并聯電力電容器 |
(Shunt Power Capacitors ) |
| ANSI/IEEE 1802.3-2001 |
載波檢測多址/沖突檢測(CSMA/CD)訪問方法的一致性測試方法和物理層規范類型10BASE-T MAU的一致性測試第6節 |
(Conformance Test Methodology for Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications Type 10BASE-T MAU Conformance Testing Section 6) |
| ANSI/IEEE 181-2003 |
轉換、脈沖和有關波形的標準 |
(Standard on Transitions, Pulses, and Related Waveforms ) |
| ANSI/IEEE 187-1990 |
無線電接收機.調頻和電視廣播接收機附加輻射的露天測量方法 |
(Radio Receivers - Open Field Method of Measurement of Spurious Radiation from Frequency Modulation and Television Broadcast Receivers) |
| ANSI/IEEE 2001-2002 |
因特網推薦實施規范.網頁工程.內部網/外部網用 |
(Recommended Practice for Internet Practices - Web Page Engineering - Intranet/Extranet Applications ) |
| ANSI/IEEE 2003-2003 |
信息技術標準.測量與POSIX標準相適應的試驗方法規范和試驗方法 實施方法的要求和指南 |
(Standard for Information Technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards ) |
| ANSI/IEEE 2003.1-1993 |
信息技術.測量與POSI一致性的試驗方法.系統接口 |
(Information Technology - Test Methods for Measuring Conformance to POSIX - System Interfaces) |
| ANSI/IEEE 2003.2-1996 |
信息技術.測量與POSIX一致性的測試法.第2部分:外殼和實用事務程序 |
(Information Technology - Test Methods for Measuring Conformance to POSIX - Part 2: Shell and Utilities) |
| ANSI/IEEE 205-2001 |
電視標準:熒光信號級的測量 |
(Standard on Television: Measurement of Luminance Signal Levels) |
| ANSI/IEEE 208-1995 |
視頻技術.攝像系統分辨率的測量1992技術 |
(Video Techniques - Measurement of Resolution of Camera Systems 1992 Techniques) |
| ANSI/IEEE 241-1991 |
商業建筑物中電力系統(灰皮書) |
(Electric Power Systems in Commercial Buildings (Gray Book)) |
| ANSI/IEEE 242-2001 |
工業和商業電力系統的保護和協調的推薦實施規程 |
(Protection and Coordination of Industrial and Commercial Power Systems, Recommended Practice for) |
| ANSI/IEEE 252-1995 |
磁隙有液多相感應電動機的測試程序 |
Motors Having Liquid in the Magnetic Gap, Test Procedure for Polyphase Induction |
| ANSI/IEEE 260.1-1993 |
測量單位制的文字符號(國際單位、常規英寸-磅單位和某些其他單位) |
Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units) |
| ANSI/IEEE 260.1-2004 |
測量單位用字母符號 |
|
| ANSI/IEEE 260.3-1993 |
物理科學和技術中使用的數學信號和符號 |
Mathematical Signs and Symbols for Use in Physical Sciences and Technology |
| ANSI/IEEE 260.4-1996 |
聲學量值的字母符號和縮寫 |
Letter Symbols and Abbreviations for Quantities Used in Acoustics |
| ANSI/IEEE 269-1993 |
模擬和數字電話機傳輸性能測試方法 |
Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets |
| ANSI/IEEE 269-2002 |
模擬和數字電話機傳輸性能測試方法 |
(Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets ) |
| ANSI/IEEE 275-1993 |
采用定型纏繞的預絕緣定子線圈的交流電機絕緣系統的熱量評定推薦實施規程 |
Thermal Evaluation of Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils, Recommended Practice for |
| ANSI/IEEE 277-1995 |
水泥廠電源配電的推薦實施規程 |
Recommended Practice for Cement Plant Power Distribution |
| ANSI/IEEE 280-1985 |
電學和電氣工程中量值的字母符號 |
Quantities Used in Electrical Science and Electrical Engineering, Letter Symbols for |
| ANSI/IEEE 290-1980 |
電耦合器 |
Electric Couplings |
| ANSI/IEEE 291-1991 |
測量30Hz-30GHz正旋連續波電磁場強度的標準方法 |
Standard Methods for Measuring Electromagnetic Field Strength of Sinusoidal Continuous Waves, 30 Hz to 30 GHz |
| ANSI/IEEE 292-1969 |
單自由度抑跳速率陀螺的規范格式 |
Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros |
| ANSI/IEEE 293-1969 |
單自由度抑跳速率陀螺的試驗程序 |
Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate Gyros |
| ANSI/IEEE 295-1969 |
電子設備電力變壓器 |
Electronics Power Transformers |
| ANSI/IEEE 300-1988 |
半導體帶電粒子探測器的測試程序 |
Test Procedures for Semiconductor Charged-Particle Detectors |
| ANSI/IEEE 301-1988 |
電離輻射半導體探測器用放大器和前置放大器的測試程序 |
Amplifiers and Preamplifiers for Semiconductor Detectors for lonizing Radiation, Test Procedures for |
| ANSI/IEEE 303-1991 |
一類電機輔助設備.A、B、C和D組第二節定位 |
Auxiliary Devices for Motors in Class 1 - Groups A, B, C, and D, Division 2 Locations |
| ANSI/IEEE 304-1977 |
直流電機絕緣系統的評定和分類的試驗程序 |
Evaluation and Classification of Insulation Systems for DC Machines, Test Procedure for |
| ANSI/IEEE 308-1992 |
核電站1E級電力系統的標準 |
Power Systems for Nuclear Power Generating Stations, Criteria for Class 1E |
| ANSI/IEEE 309-1970 |
蓋革-彌勒計數器的試驗程序 |
Geiger-Muller Counters, Test Procedure for |
| ANSI/IEEE 310-1969 |
參考標準電阻器 |
Reference-Standard Electrical Resistors |
| ANSI/IEEE 315-1975 |
電氣和電子圖示用圖形符號(包括參考標注類的標注文字) |
Electrical and Electronics Diagrams (including Reference Designation Class Designation Lefters), Graphic Symbols for |
| ANSI/IEEE 315A-1986 |
電氣和電子圖示用圖形符號 |
Electrical and Electronics Diagrams, Graphic Symbols for |
| ANSI/IEEE 317-1983 |
核電站安全殼結構的電氣穿入件 |
Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations |
| ANSI/IEEE 32-1972 |
中性接地裝置的標準要求、術語和試驗過程 |
Neutral Grounding Devices, Standard Requirements, Terminology, and Test Procedure for |
| ANSI/IEEE 323-1984 |
核電站1E級設備的質量鑒定 |
Qualifying Class 1E Equipment for Nuclear Power Generating Stations |
| ANSI/IEEE 325-1996 |
鍺γ射線探測器試驗過程 |
Germanium Gamma-Ray Detectors, Test Procedures for |
| ANSI/IEEE 334-1994 |
核電站1E級電動機連續負載質量鑒定 |
Qualifying Continuous Duty Class IE Motors for Nuclear Power Generating Stations |
| ANSI/IEEE 336-1985 |
核裝置的電力測試設備和控制設備的安裝、檢驗及試驗要求 |
Installation, Inspection, and Testing Requirements for Power Instrumentation and Control Equipment at Nuclear Facilities |
| ANSI/IEEE 337-1993 |
線性單軸擺模擬扭矩平衡式加速測量儀規范格式指南和測試程序 |
Specification Format Guide and Test Procedure for Linear, Single-Axis, Pendulous, Analog Torque Balance Accelerometer |
| ANSI/IEEE 338-1987 |
核電站安全系統周期監督測試的準則 |
Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems |
| ANSI/IEEE 344-1987 |
核電站1E設備抗地震合格鑒定的推薦實施規范 |
Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations, Recommended Practice for |
| ANSI/IEEE 352-1994 |
核電站安全系統可靠性分析通用原則指南 |
Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems |
| ANSI/IEEE 367-1996 |
來源于動力故障的感應電壓和動力電站潛在升高測定的推薦操作規程 |
Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault |
| ANSI/IEEE 376-1975 |
電磁輻射.脈沖強度和脈沖譜帶寬度的測量 |
Radiation, Electromagnetic - Impulse Strength and Impulse Bandwidth, Measurement of |
| ANSI/IEEE 377-1980 |
地面移動通信發射機亂真發射測量 |
Spurious Emission from Land-Mobile Communication Transmitters, Measurement of |
| ANSI/IEEE 379-1994 |
核電站安全系統中簡單故障判定的應用 |
Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems |
| ANSI/IEEE 382-1996 |
核電廠電力操作閥組調節器安全相關性能的質量鑒定 |
Actuators for Power-Operated Valve Assemblies with Safety-Related Functions for Nuclear Power-Plants, Qualification of |
| ANSI/IEEE 383-1974 |
核電站1E級電纜型式試驗的現場拼接和聯接 |
Type Test of Class 1E Electric Cables, Field Splices, and Connections for Nuclear Power Generating Stations |
| ANSI/IEEE 384-1992 |
1E級設備和線路獨立性標準 |
Independence of Class 1E Equipment and Circuits, Criteria for |
| ANSI/IEEE 386-1995 |
600V以上配電系統的可分離絕緣連接器系統 |
Separable Insulated Connector Systems for Power Distribution Systems above 600 V |
| ANSI/IEEE 387-1995 |
作為核電站備用電源的柴油發電機裝置的標準 |
Standard Criteria for Diesel-Generator Units Applied as Standby Power Supplies for Nuclear Power Generating Stations |
| ANSI/IEEE 388-1992 |
電功率轉換設備中的變壓器和電感線圈 |
Transformers and Inductors in Electronic Power Conversion Equipment |
| ANSI/IEEE 389-1996 |
電子變壓器和感應器的試驗的推薦操作規程 |
Recommended Practice for Testing Electronic Transformers and Inductors |
| ANSI/IEEE 390-1987 |
脈沖變壓器 |
Pulse Transformers |
| ANSI/IEEE 393-1991 |
磁芯測試程序 |
Magnetic Cores, Test Procedures for |
| ANSI/IEEE 398-1972 |
閃爍計數用光電倍增器的標準試驗程序和閃爍計數專業詞匯 |
Standard Test Procedures for Photo-Multipliers for Scintillation Counting and Glossary for Scintillation Counting Field |
| ANSI/IEEE 399-1997 |
電力系統分析推薦實施規范(棕皮書) |
Analysis (IEEE Brown Book), Recommended Practice for Power System |
| ANSI/IEEE 4-1995 |
高壓試驗的標準技術 |
Standard Techniques for High-Voltage Testing |
| ANSI/IEEE 400-2002 |
電力電纜系統現場進行直流高壓試驗的指南 |
(Direct Voltage Tests on Power Cables in the Field, Guide for Making ) |
| ANSI/IEEE 400.2-2004 |
使用超低頻(VLF)的屏蔽電力電纜系統的現場試驗指南 |
|
| ANSI/IEEE 415-1986 |
核發電系統的1E級動力系統的預操作試驗程序設計指南 |
Preoperational Testing Programs for Class 1E Power Systems for Nuclear Power Generating Systems, Guide for Planning of |
| ANSI/IEEE 416-1984 |
ATLAS試驗語言 |
ATLAS Test Language |
| ANSI/IEEE 420-2001 |
核電站用1E級控制板、操縱臺及操縱儀表架的設計和鑒定標準 |
Standard for the Design and Qualification of Class 1E Control Boards, Panels and Racks Used in Nuclear Power Generating Stations |
| ANSI/IEEE 421.1-1996 |
同步電機的勵磁系統的標準定義 |
Standard Definitions for Excitation Systems for Synchronous Machines |
| ANSI/IEEE 421.4-2004 |
勵磁系統規范制訂指南 |
|
| ANSI/IEEE 421.5-1992 |
動力系統穩定性研究用勵磁系統模型的推薦規程 |
Recommended Practice for Excitation System Models for Power System Stability Studies |
| ANSI/IEEE 421B-1979 |
勵磁系統同步電機的高電勢試驗要求 |
Synchronous Machines, High Potential Test Requirements for Excitation Systems for |
| ANSI/IEEE 422-1986 |
發電站電纜系統的設計和安裝指南 |
Design and Installation of Cable Systems in Power Generating Stations, Guide for the |
| ANSI/IEEE 429-1994 |
使用額定值6900V和以下的機械用環繞型預絕緣發電機定子的交流電機的密封絕緣系統熱評估的推薦實施規范 |
Recommended Practice for Thermal Evaluation of Sealed Insulation Systems for AC Electric Machinery Employing Form-Wound Pre-Insulated Stator Coils for Machines Rated 6900 V and Below |
| ANSI/IEEE 43-1974 |
旋轉電機絕緣電阻測試的推薦方法 |
Testing Insulation Resistance of Rotating Machinery, Recommended Practice for |
| ANSI/IEEE 430-1986 |
來自架空電力線路和變電站的無線電噪聲測量程序 |
Overhead Power Lines and Substations, Procedures for the Measurement of Radio Noise from |
| ANSI/IEEE 432-1993 |
旋轉電機絕緣維護指南(5hp-不低于10000hp) |
Insulation Maintenance for Rotating Electrical Machinery (5 hp to Less Than 10000 hp), Guide for |
| ANSI/IEEE 433-1974 |
高壓甚低頻大型交流旋轉電機的絕緣試驗推薦規程 |
Large AC Rotating Machinery with High Voltage at Very Low Frequency, Practice for Insulation Testing of |
| ANSI/IEEE 434-1973 |
大型高壓電機絕緣系統的功能評定指南 |
Functional Evaluation of Insulation Systems for Large High-Voltage Machines, Guide for |
| ANSI/IEEE 436-1991 |
電子變壓器產生電暈(局部放電)的測量指南 |
Guide for Making Corona (Partial Discharge) Measurements on Electronics Transformers |
| ANSI/IEEE 442-1981 |
土壤熱阻系數測量指南 |
Soil Thermal Resistivity Measurements, Guide for |
| ANSI/IEEE 446-1995 |
工業和商業用的應急和備用電力系統 |
Emergency and Standby Power Systems for Industrial and Commercial Applications |
| ANSI/IEEE 45-2002 |
船上電氣設備的推薦實施規范 |
(Recommended Practice for Electrical Installations on Shipboard ) |
| ANSI/IEEE 450-1994 |
發電站和變電站的大型鉛蓄電池組的維護、試驗和更換規程 |
Maintenance, Testing, and Replacement of Large Lead Storage Batteries for Generating Stations and Substations, Practice for |
| ANSI/IEEE 460-1988 |
交流電量轉換成直流電量的電測量傳感器 |
Electrical Measuring Transducers for Converting AC Electrical Quantities into DC Electrical Quantities |
| ANSI/IEEE 463-1994 |
電解電池線工作區的電氣安全規程 |
Electrical Safety Practices in Electrolytic Cell-Line Working Zones |
| ANSI/IEEE 473-1985 |
無線電噪聲.電磁場測量(10KHz到10GHz)的推薦實施規范 |
Radio Noise - Recommended Practice for an Electromagnetic Site Survey (10 kHz to GHz) |
| ANSI/IEEE 475-1983 |
輻射場干擾傳感器的測量程序 |
Radiation-Field-Disturbance Sensors, Measurement Procedure for |
| ANSI/IEEE 48-1996 |
高壓交流電纜終端的標準測試程序和要求 |
Standard Test Procedures and Requirements for High-Voltage Alternating-Current Cable Terminations |
| ANSI/IEEE 484-1996 |
發電站及變電站用大型鉛蓄電池組的設備設計和安裝實施規范 |
Installation Design and Installation of Large Lead Storage Batteries for Generating Stations and Substations, Practice for |
| ANSI/IEEE 484-2002 |
發電站及變電站用大型酸性鉛蓄電池組設備的設計和安裝實施規程 |
(Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications ) |
| ANSI/IEEE 485-1997 |
固定應用的鉛酸電池尺寸測量的推薦實施規程 |
Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications |
| ANSI/IEEE 487-1992 |
發電站用通信設備的線路保護指南 |
Communication Facilities Serving Electric Power Stations, Guide for the Protection of Wire-Line |
| ANSI/IEEE 488.1-1987 |
可編程序設備的數字接口 |
Digital Interface for Programmable Instrumentation |
| ANSI/IEEE 488.2-1993 |
代碼、格式、協議和通用命令 |
Codes, Formats, Protocols, and Common Commands |
| ANSI/IEEE 495-1986 |
故障電路指示器的試驗指南 |
Testing Faulted Circuit Indicators, Guide for |
| ANSI/IEEE 497-2002 |
核電站用事故監測儀標準 |
(Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations ) |
| ANSI/IEEE 498-1991 |
核裝置用測量與試驗設備的校準及控制要求 |
Calibration and Control of Measuring and Test Equipment Used in Nuclear Facilities, requirements for the |
| ANSI/IEEE 499-1997 |
水泥廠電驅動設備和相關電設備的推薦規程 |
Cement Plant Electric Drives and Related Electrical Equipment, Recommended Practice for |
| ANSI/IEEE 502-1985 |
化石燃料單連接蒸汽爐保護、內鎖和控制指南 |
Fossil-Fueled Unit-Connected Steam Stations, Guide for Protection, Interlocking, and Control of |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com