標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D 5188-1991 |
燃料蒸氣液體比率溫度測定的試驗方法 |
Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method) (05.03) |
| ANSI/ASTM D 5189-1991 |
汽油和氧化汽油混合物氣-液比為20的對應溫度的試驗方法(氧彈法) |
Test Method for Temperature Corresponding to Vapor-Liquid Ratio of 20 for Gasoline and Gasoline-Oxygenate Blends (Bomb Method) (05.03) |
| ANSI/ASTM D 5190-2001 |
石油產品的蒸氣壓力的試驗方法(自動方法) |
Test Method for Vapor Pressure of Petroleum Products (Automatic Method) (05.03) |
| ANSI/ASTM D 5191-2001 |
石油產品的蒸氣壓力的試驗方法 |
Test Method for Vapor Pressure of Petroleum Products (Mini Method) (05.03) |
| ANSI/ASTM D 5203-1991 |
用過后再生的高密度聚乙烯材料模壓和擠壓聚乙烯塑料規范 |
Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer HDPE Sources (08.03) |
| ANSI/ASTM D 5204-2001 |
注模和擠壓材料的聚酰胺分類系統 |
Classification System for Polyamide-imide (PAI) Molding and Extrusion Materials (08.03) |
| ANSI/ASTM D 5205-1995 |
聚乙烯-亞胺材料分類系統 |
Classification System for Polyetherimide (PEI) Materials (08.03) |
| ANSI/ASTM D 5206-1997 |
硬質聚氯乙烯擋板耐風荷載的試驗方法 |
Test Method for Windload Resistance of Rigid Poly(Vinyl Chloride) (PVC) Siding |
| ANSI/ASTM D 5207-1991 |
塑料材料小型燃燒試驗20和125mm試驗火焰的校準規程 |
Practice for Calibration of 20 and 125 mm Test Flames for Small-Scale Burning Tests on Plastic Materials (08.03) |
| ANSI/ASTM D 5208-1991 |
光降解塑料輻照用熒光紫外線燈和縮聚裝置的操作規程 |
Practice for Operating Fluorescent UV and Condensation Apparatus for Exposure of Photodegradable Plastics (08.03) |
| ANSI/ASTM D 5210-1992 |
測定城市污水管污泥中塑料的厭氧生物降解的試驗方法 |
Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewer Sludge (08.03) |
| ANSI/ASTM D 5213-1995 |
電氣絕緣和電介質用聚酰亞胺樹脂膜規范 |
Specification for Polymide Resin Film for Electrical Insulation and Dielectric Application (10.02) |
| ANSI/ASTM D 5224-1993 |
熱固模制化合物試樣壓塑的規程 |
Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds (08.03) |
| ANSI/ASTM D 5225-1992 |
用差分粘度計測量共聚物溶解粘度的試驗方法 |
Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer (08.03) |
| ANSI/ASTM D 5226-1992 |
溶解聚合物材料的實施規程 |
Practice for Dissolving Polymer Materials (08.03) |
| ANSI/ASTM D 5227-2001 |
聚烯烴的正己烷可提取含量的試驗方法 |
Test Method for the Measurement of Hexane Extractable Content of Polyolefins (08.03) |
| ANSI/ASTM D 5234-1992 |
乙烯產品分析指南 |
Guide for the Analysis of Ethylene Product (05.03) |
| ANSI/ASTM D 5236-2001 |
重烴混合物的蒸餾試驗方法(真空蒸餾鍋法) |
Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potsill Method), Test Method for (05.03) |
| ANSI/ASTM D 524-1988 |
石油產品中的蘭氏殘?zhí)嫉脑囼灧椒?/td>
| Ramsbottom Carbon Residue of Petroleum Products, Method of Test for (05.01) |
| ANSI/ASTM D 525-1994 |
汽油氧化穩定性的試驗方法(誘導期法) |
Oxidation Stability of Gasoline (Induction Period Method), Test Method for (05.01) |
| ANSI/ASTM D 5260-1992 |
聚氯乙烯(PVC)同聚體和共聚體化合物及氯化聚氯乙烯(CPVC)化合物的分類 |
Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinatd Poly(Vinyl Chloride) (CPVC) compounds, Classification for (08.03) |
| ANSI/ASTM D 5271-1992 |
活化污泥污水處理系統中塑料的有氧生物降解的試驗方法 |
Test Method for Accessing the Aerobic Biodegradation of Plastic Materials in an Activated Sludge Wastewater-Treatment-System (08.03) |
| ANSI/ASTM D 5272-1992 |
光降解塑料戶外輻照試驗的實施規程 |
Practice for Outdoor Exposure Testing of Photodegradable Plastics (08.03) |
| ANSI/ASTM D 5273-1992 |
丙烯濃聚物分析指南 |
Guide for Analysis of Propylene Concentrates (05.03) |
| ANSI/ASTM D 5274-1992 |
1,3-丁二烯產品分析指南 |
Guide for the Analysis of 1,3-Butadiene Product (05.01) |
| ANSI/ASTM D 5275-1992 |
測試含液體聚合物的燃料注入器剪切穩定性試驗的方法 |
Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids (05.01) |
| ANSI/ASTM D 5279-2001 |
用扭矩對塑料動態機械特性測量的試驗方法 |
Test Method for Measuring the Dynamic Mechanical Properties of Plastics in Torsion (08.03) |
| ANSI/ASTM D 5280-1996 |
用線性校準函數評價空氣質量測量方法的性能特性的實施規程 |
Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions |
| ANSI/ASTM D 5281-1992 |
大氣、工作場所或室內空氣中六價鉻分析和收集的試驗方法 |
Test Method for Collection and Analysis of Hexavalent Chromium in Ambient, Workplace, or Indoor Atmospheres |
| ANSI/ASTM D 5291-2001 |
石油產品和潤滑劑中碳、氫和氮含量的儀器測定試驗方法 |
Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants, Test Method for (05.03) |
| ANSI/ASTM D 5292-1993 |
用高分辨率核磁共振光譜法測定芳烴油中碳和氫含量的試驗方法 |
Aromatic Hydrogen and Aromatic Carbon Contents of Hydrocarbon Oils by High-Resolution Nuclear Magnetic Resonance Spectroscopy, Test Method for (05.03) |
| ANSI/ASTM D 5293-1992 |
用冷起動模擬法測定30℃至50℃時發動機油表觀粘度的試驗方法 |
Apparent Viscosity of Engine Oils - Between 30 and 50鳦 Using the Cold-Cranking Simulation, Test Method for (05.03) |
| ANSI/ASTM D 5296-1992 |
用高性能尺寸排斥色譜法對聚苯乙烯的平均分子量和分子量分布的測試方法 |
Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03) |
| ANSI/ASTM D 5302-1995 |
低溫條件下操作的以汽油為燃料的輕型火花式內燃機中為防止沉積物形成和磨耗用汽車發動機油的評估試驗方法 |
New Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in Spark-Ignition Internal-Combustion Engine Fueled with Gasoline and Operated Under Low Temperature, Light-Duty Can (05.03) |
| ANSI/ASTM D 5303-1992 |
用氣相色層分析法對丙烯中痕量硫化羰的新試驗方法 |
New Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography |
| ANSI/ASTM D 5304-1994 |
用過厭氧法評價蒸餾燃料貯存穩定性的試驗方法 |
New Test Method for Assessing Distillate Fuel Storage Stability by Oxygen Overpressure (05.03) |
| ANSI/ASTM D 5305-1992 |
測定液化石油氣蒸汽中乙硫醇的試驗方法 |
New Test Method for the Determination of Ethyl Mercaptan in LPGas Vapor |
| ANSI/ASTM D 5306-1992 |
潤滑油和液壓液火焰線性蔓延速率的新試驗方法 |
New Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids (05.03) |
| ANSI/ASTM D 5318-1992 |
過氧化酯和過碳酸氫鈉中可水解氯的試驗方法 |
Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Discarbonates (X-15-356) 92-03 Item 14 |
| ANSI/ASTM D 5319-2001 |
玻璃纖維增強聚酯墻板和天花板規范 |
Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels |
| ANSI/ASTM D 5337-1992 |
校正個人取樣泵流量率的操作規程 |
Practice for Flow Rate for Calibration of Personal Sampling Pumps |
| ANSI/ASTM D 5338-1992 |
評定在受控混合條件下塑料有氧降解的試驗方法 |
Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions |
| ANSI/ASTM D 5365-2001 |
纖維玻璃(玻璃纖維增強熱固樹脂)管的長期環彎曲應力的試驗方法 |
Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D 5384-1995 |
用于石油產品的氯的試驗方法(油田測試盒方法) |
Test Method for Chlorine in Used Petroleum Products (Field Test Kit Method) (05.03) |
| ANSI/ASTM D 5394-1997 |
精制1,1,1-三氯乙烷規范 |
Specification for Reclaimed 1,1,1-Trichloroethane |
| ANSI/ASTM D 5395-1997 |
精制二氯甲烷規范 |
Specification for Reclaimed Methylene Chloride |
| ANSI/ASTM D 5418-2001 |
用雙懸臂束對塑料動態機械特性的試驗方法 |
Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using a Dual Cantilever Beam (08.03) |
| ANSI/ASTM D 542-1995 |
透明有機塑料折射指數的試驗方法(08.01) |
Test Methods for Index of Refraction of Transparent Organic Plastics (08.01) |
| ANSI/ASTM D 5424-1997 |
電纜或光纜絕緣材料在立式電纜槽裝置中燃燒時煙霧管制的試驗方法 |
Test Method for Smoke Obscuration Caused by Burning Cables in a Vertical Configuration (10.02) |
| ANSI/ASTM D 543-2001 |
評價塑料抗化學試劑的實施規程 |
Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ANSI/ASTM D 5438-2001 |
用于化學分析的樓板塵埃收集的實施規程 |
Practice for Collection of Floor Dust for Chemical Analysis |
| ANSI/ASTM D 5452-1994 |
用實驗室過濾法測定航空燃料中粒狀雜質含量的試驗方法 |
Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration (05.03) |
| ANSI/ASTM D 5466-2002 |
測定大氣中揮發的有機化學品的試驗方法（容器抽樣法） |
Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology) |
| ANSI/ASTM D 5470-2001 |
薄的熱傳導固體電絕緣材料熱傳導性能的試驗方法 |
Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials (10.02) |
| ANSI/ASTM D 5477-1995 |
傅里葉轉換紅外光譜法(FTIR)識別夾雜物或多聚層的實施規程 |
Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Spectroscopy (FT-IR) (08.03) |
| ANSI/ASTM D 5480-1995 |
用氣相色譜法測試機油揮發性的試驗方法 |
Test Method for Motor Oil Volatility by Gas Chromatography (05.03) |
| ANSI/ASTM D 5482-2001 |
石油產品的蒸氣壓力的試驗方法(最低大氣法) |
Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric) |
| ANSI/ASTM D 5483-2002 |
用壓差掃描熱量測定法測試潤滑脂的氧化誘導時間的試驗方法 |
Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry |
| ANSI/ASTM D 5485-1994 |
用錐型腐蝕計測定可燃性產品的腐蝕性的試驗方法 |
Fire Test Response Standard for Determining the Corrosive Effective of Combustion Products Using the Cone Corrosimeter (10.02) |
| ANSI/ASTM D 5500-1994 |
進液閥門沉積形成的不含鉛自動火花點火引擎燃料的車輛評價試驗方法 |
Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit (05.03) |
| ANSI/ASTM D 5501-1994 |
用氣相色層分析法測定變性燃料乙醇中乙醇含量的試驗方法 |
Test Method for the Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography (05.03) |
| ANSI/ASTM D 5502-1994 |
用物理測量法對制鋁工業用加工的陽極和陰極碳表觀密度進行測量的試驗方法 |
Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry (05.03) |
| ANSI/ASTM D 5507-1994 |
用毛細管柱/多維氣相色層分析法測定氯乙烯體中痕量有機雜質的測試方法 |
Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multi-Dimensional Gas Chromatography |
| ANSI/ASTM D 5508-1994 |
用液上氣相色層分析法對苯乙烯-丙烯腈共聚物和丁腈橡膠中殘留丙烯腈單體的定量測試方法 |
Test Method for Quantitation of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymers and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (08.03) |
| ANSI/ASTM D 5509-1994 |
塑料暴露于模擬混合物環境下的實施規程 |
Practice for Exposing Plastics to a Simulated Compost Environment |
| ANSI/ASTM D 5510-1994 |
氧化降解塑料加熱老化規程 |
Practice for Heat Aging of Oxidatively Degradable Plastics |
| ANSI/ASTM D 5511-1994 |
測定在高密度厭氧菌致分解條件下塑性材料厭氧降解的試驗方法 |
Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ANSI/ASTM D 5512-1994 |
塑料在使用外部加熱反應器模擬混合環境下的暴露規程 |
Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor |
| ANSI/ASTM D 5516-1996 |
在高溫下阻燃處理的軟木膠合板機械特性評定的試驗方法 |
Test Methods for Evaluating the Mechanical Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures |
| ANSI/ASTM D 5523-1994 |
聚氨酯原料測試方法通過銀鹽定量測定芳香異氰酸酯單體中的可水解氯測試酸度 |
Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates |
| ANSI/ASTM D 5524-1994 |
使用液相色譜法測定高密度聚乙烯中苯酚抗氧化劑的方法 |
Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography |
| ANSI/ASTM D 5525-1994 |
塑料在模擬填埋條件下的暴露規程 |
Practice for Exposing Plastics to a Simulated Landfill Environment |
| ANSI/ASTM D 5526-1994 |
測定塑性材料在強化填埋條件下厭氧生物降解的試驗方法 |
Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions |
| ANSI/ASTM D 5527-2001 |
用聲波手段測量表面風力和溫度的實施規程 |
Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ANSI/ASTM D 5533-1998 |
評價IIIe排列下火花點燃式發動機中汽車發動機油的試驗方法 |
Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIe Spark-Ignition Engine |
| ANSI/ASTM D 5537-1997 |
電纜或光纜絕緣材料在立式電纜槽裝置中燃燒時熱發散、火焰?zhèn)鞑ズ唾|(zhì)量損失測試的試驗方法 |
Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ANSI/ASTM D 5562-1995 |
測定機動車齒油與典型油封彈性體配合性的試驗方法 |
Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers (15.04) |
| ANSI/ASTM D 5568-1995 |
測量微波頻率下固體材料磁導率和相對復合電容率的試驗方法 |
Test Method for Measuring Relative Complex Permittivity and Magnetic Permeability of Solid Materials at Microwave Frequencies (10.02) |
| ANSI/ASTM D 5569-1994 |
用在覆蓋熱件的磁氧化電級靜電流量測定的試驗方法 |
Test Method for the Determination of Static Flow of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements (10.02) |
| ANSI/ASTM D 5575-1994 |
乙烯基氟化物(VDF)與其它氟化材料共聚物的詳細規范根據和系統的分類 |
Classification for System and Basis for Specification of Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Materials (08.03) |
| ANSI/ASTM D 5579-1997 |
在循環耐久試驗中手工傳輸潤滑劑熱穩定型評價的試驗方法 |
Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test (05.03) |
| ANSI/ASTM D 5580-2002 |
氣相色譜法測定成品汽油中苯、甲苯、苯乙烯、對/間二甲苯、鄰-二甲苯、C9和重芳香族和全部芳香族的試驗方法 |
Test Method for Determination of Benzene, Toluene, Ethylbenzene, P/M-Sylene, O-Xylene, C9 and Heavier Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography (05.03) |
| ANSI/ASTM D 5592-1994 |
使用塑料的工程設計用材料的性能指南 |
Guide for Material Properties Needed in Engineering Design Using Plastics (08.03) |
| ANSI/ASTM D 5593-1994 |
烯屬熱塑性彈力計(TEO)的分類系統 |
Classification Systems for Thermoplastic Elastomers-Olefinic (TEO) (08.03) |
| ANSI/ASTM D 5594-1994 |
利用傅里葉變換紅外光譜測定亞乙(基)醋酸乙烯(EVA)中醋酸乙烯的含量的試驗方法 |
Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (08.03) |
| ANSI/ASTM D 5598-2001 |
電子孔燃料注射污垢非鉛自動火花點火引擎燃料評價的試驗方法 |
Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling (05.03) |
| ANSI/ASTM D 5599-1994 |
用氣相色譜和選擇性燃燒氧化電離法測定汽油氧化的試驗方法 |
Test Method for the Determination of Oxygenates in Gasoline by Gas Chromotography and Oxygen Selective Flame Ionization Detection (05.03) |
| ANSI/ASTM D 56-2001 |
標簽封閉試驗室的閃點試驗方法 |
Flash Point by Tag Closed Tester, Method of Test for (05.01, 06.03) |
| ANSI/ASTM D 5600-1994 |
用感應耦合等離子原子發射光譜法對石油焦碳中痕量金屬的試驗方法 |
Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) (05.03) |
| ANSI/ASTM D 5612-2001 |
水質測量大綱質量規劃和現場實施指南 |
Guide for Quality Planning and Field Implementation of a Water Quality Measurement Program |
| ANSI/ASTM D 5619-1994 |
用輕扣扭力測試機對金屬熔化移動液流的比較方法 |
Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine (05.03) |
| ANSI/ASTM D 5620-1994 |
使用針式型和V形塊試驗機評定排水和干模式中薄膜液體潤滑劑的試驗方法 |
Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and V-Block Test Machine (05.03) |
| ANSI/ASTM D 5621-2001 |
液流聲波聲音剪切穩定性的試驗方法 |
Test Method for Sonic Shear Stability of Hydraulic Fluid (05.03) |
| ANSI/ASTM D 5622-1995 |
熱解還原作用對甲醇燃料和汽油完全氧化測定的試驗方法 |
Test Methods for the Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis (05.03) |
| ANSI/ASTM D 5626-1997 |
美國郵政局光學測量用于小電話網的試驗方法 |
Test Method for U.S. Postal Service Optical Measurements for Small Areas |
| ANSI/ASTM D 5628-2001 |
用墜鏢法(撞錘或下墜重量)測試平坦、剛性塑料樣品抗沖擊特性的試驗方法 |
Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Weight) (08.03) |
| ANSI/ASTM D 5629-1994 |
聚氨基甲酸乙酯原材料的試驗方法:低酸性芳族異氰酸鹽酯和聚氨基甲酸乙酯預聚物酸度的測定 |
Test Method for Polyurethane Raw Materials: Determination of Acidity in Low Acidity Aromatic Isocyanates and Polyurethane Prepolymers (08.03) |
| ANSI/ASTM D 5630-2001 |
熱塑中灰分含量的試驗方法 |
Test Method for Ash Content in Thermoplastics (08.03) |
| ANSI/ASTM D 5632-2001 |
聚四氟乙烯1301、三氟甲溴(CF3Br)規范 |
Specification for Halon 1301, Bromotrifluoroemethane (CF3BR) |
| ANSI/ASTM D 5637-1995 |
電絕緣清漆耐潮性的試驗方法 |
Test Method for Moisture Resistance of Electrical Insulating Varnishes (10.02) |
| ANSI/ASTM D 5638-1995 |
電絕緣清漆耐化學性的試驗方法 |
Test Method for Chemical Resistance of Electrical Insulating Varnishes (10.02) |
| ANSI/ASTM D 565-1988 |
白礦物油(液體石蠟)中易碳化物質的試驗方法 |
Carbonizable Substances in White Mineral Oil (Liquid Petrolatum), Method of Test for (05.01) |
| ANSI/ASTM D 566-1987 |
潤滑脂的滴點試驗方法 |
Test Method for Dropping Point of Lubricating Grease (05.01) |
| ANSI/ASTM D 5664-1996 |
評定阻燃處理和高溫對阻燃處理木材強度性能影響的試驗方法 |
Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber |
| ANSI/ASTM D 5673-2002 |
采用電感耦合等離子體質譜法測試水中素的方法 |
Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectometry |
| ANSI/ASTM D 5675-1995 |
氟聚物微粉劑規范 |
Specification for Fluoropolymer Micro Powders (08.03) |
| ANSI/ASTM D 5676-1995 |
再循環聚苯乙烯模塑和擠壓材料的規范 |
Specification for Recycled Polystyrene Molding and Extrusion Materials (08.03) |
| ANSI/ASTM D 5677-1995 |
航空噴氣式發動機燃料供應管道用纖維玻璃管(玻璃纖維增強熱固樹脂)和管配件的規范.粘合劑粘接接頭型 |
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines (08.04) |
| ANSI/ASTM D 5685-2001 |
纖維玻璃壓力管道配件規范 |
Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings (08.04) |
| ANSI/ASTM D 5686-1995 |
冷凝水回流管道用纖維玻璃管(玻璃纖維增強熱固樹脂)和管配件的規范.粘結劑粘接型環氧樹脂 |
Specification for Fiberglass (Glass-fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type Epoxy Resin, for Condensate Return Lines (08.04) |
| ANSI/ASTM D 570-1995 |
塑料水吸收試驗方法(08.01) |
Test Method for Water Absorption of Plastics (08.01) |
| ANSI/ASTM D 5704-1995 |
人工傳輸和主傳動軸用潤滑油的熱性能和氧化穩定性評價的試驗方法 |
Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmission and Final Drive Axles (05.03) |
| ANSI/ASTM D 5705-1996 |
渣油上氣相硫化氫測定的測試方法 |
Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase above Residual Fuel Oils (05.03) |
| ANSI/ASTM D 5706-1995 |
使用高頻線性振蕩(SRV)試驗機測定潤滑脂特高壓性能的試驗方法 |
Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine (05.03) |
| ANSI/ASTM D 5708-1996 |
用感應耦合等離子體原子發射光譜法測定原油和渣油中鎳、釩和鐵的試驗方法 |
Test Method for Determination of Nickel, Vanadium and Iron in Crude Oils and Residual Fuels by Inductively-Coupled Plasma (ICP) Atomic Emission Spectrometry |
| ANSI/ASTM D 5709-1995 |
石油焦篩析的試驗方法 |
Test Method for Sieve Analysis of Petroleum Coke (05.03) |
| ANSI/ASTM D 5740-1995 |
D 4000格式書寫材料標準導則 |
Guide for Writing Material Standards in the D 4000 Format (95-1, Item 62) (08.03) |
| ANSI/ASTM D 5760-1995 |
人工傳輸齒輪潤滑劑性能規范 |
Specification for Performance of Manual Transmission Gear Lubricants (05.03) |
| ANSI/ASTM D 5761-1997 |
多相流體廢水懸浮操作規范 |
Practice for the Emulsification/Suspension of Multi-phase Fluid Waste Materials (05.03) |
| ANSI/ASTM D 5762-2001 |
通過船的進氣室對石油和石油產品中氮的測定方法 |
Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet (05.03) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com