標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D6735-2002 |
測量礦物焙燒排氣源中的氣體氯化物和氟化物的試驗方法. 撞擊器方法 |
(Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources - Impinger Method ) |
| ANSI/ASTM D6748a-2002 |
測定由Phenalenes和Phenalenones存在而產生的中間餾出燃料的潛在不穩定性的試驗方法.便攜式光譜儀的快速測 |
(Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones. Rapid Method by Portable Spectrophotometer ) |
| ANSI/ASTM D6749-2002 |
石油產品的傾點試驗方法(自動空氣壓力法) |
(Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method) ) |
| ANSI/ASTM D6750-2002 |
評估高速單缸柴油發動機中機油的試驗方法.1k程序(0.4%燃料硫)和1n程序(0.4%燃料硫) |
(Test Method for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine - 1k Procedure (0.4% Fuel Sulfur) and 1n Procedure (0.04% Fuel Sulfur) ) |
| ANSI/ASTM D6750-2005 |
評價高速單缸柴油發動機機油的試驗方法.1k程序(0.4%燃料硫)和1n程序(0.04%燃料硫) |
|
| ANSI/ASTM D6751-2004 |
蒸餾燃料用生物柴油燃料(B100)混合材料的臨時規范 |
|
| ANSI/ASTM D6751-2004 |
蒸餾燃料用生物柴油燃料(B100)混合材料的臨時規范 |
(Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels ) |
| ANSI/ASTM D6756-2002 |
使用便攜式光譜檢測儀測定紅染料污染濃度和估算柴油和加熱油的 ASTM色彩的試驗方法 |
(Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer ) |
| ANSI/ASTM D6777-2002 |
測定三氯乙烯的相對硬度的試驗方法 |
(Test Method for Relative Rigidity of Poly(Vinyl Chloride) (PVC) Siding ) |
| ANSI/ASTM D6779-2003 |
聚酰胺模塑和擠塑材料的分類系統 |
(Classification System for Polyamide Molding and Extrusion Materials PA ) |
| ANSI/ASTM D6783-2003 |
聚合物混凝土管規范 |
(Specification for Polymer Concrete Pipe ) |
| ANSI/ASTM D6783-2005 |
聚合物混凝土管規范 |
|
| ANSI/ASTM D6784-2002 |
燃煤固定源產生的廢氣中單體的氧化的粒子粘合的總汞含量的試驗方法(Ontario Hydro法) |
(Test Method for Elemental, Oxidized, Particle-Bound, and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method) ) |
| ANSI/ASTM D6789a-2002 |
用氙弧曝光裝置進行打印紙和書寫紙加速照明老化的試驗方法 |
(Test Method for Accelerated Light Aging of Printing and Writing Paper by Xenon-Arc Exposure Apparatus ) |
| ANSI/ASTM D6791-2002 |
測定煅燒的石油焦炭的晶粒穩定性的試驗方法 |
(Test Method for the Determination of Grain Stability of Calcined Petroleum Coke ) |
| ANSI/ASTM D6792-2003 |
石油產品和潤滑劑檢驗實驗室的質量體系指南 |
(Guide for a Quality System in Petroleum Products and Lubricants Testing Laboratories ) |
| ANSI/ASTM D6792-2005 |
石油產品和潤滑劑檢驗實驗室的質量體系指南 |
|
| ANSI/ASTM D6792a-2004 |
石油產品和潤滑劑檢驗實驗室的質量體系指南 |
|
| ANSI/ASTM D6793-2002 |
測定等溫正割和正切體積彈性模量的試驗方法 |
(Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus ) |
| ANSI/ASTM D6794-2002 |
測定加入不同量水6H處理后對機油可燃性影響的試驗方法 |
(Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 H) Heating Time ) |
| ANSI/ASTM D6795-2002 |
測定加入水和干冰短時間(30分鐘)處理后對機油可燃性影響的試驗方法 |
(Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 Min) Heating Time ) |
| ANSI/ASTM D6800-2002 |
用ICP-MS分析痕量金屬的還原性沉淀預濃縮技術制備水樣品的實施規程 |
(Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for Icp-Ms Analysis of Trace Metals ) |
| ANSI/ASTM D6803-2002 |
用小型環境試驗室對涂料中放出的揮發性有機化合物(包括羰基化合物)檢驗和取樣的實施規程 |
(Practice for Testing and Sampling of Volatile Organic Compounds (including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers ) |
| ANSI/ASTM D6807-2002 |
反向滲透率為2-100US/EM的持續的電去電離作用系統運行性能的試驗方法 |
(Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from 2 - 100 US/EM ) |
| ANSI/ASTM D6808-2002 |
水分析用標準物質生產者的能力要求的實施規程 |
(Practice for Competency Requirements of Reference Material Producers for Water Analysis ) |
| ANSI/ASTM D6810-2002 |
利用線性掃描伏安法測定汽輪機油中的合成樹脂酚的抗氧化含量的試驗方法 |
(Test Method for Measurement fo Hindered Phenolic Antioxidant Content in Turbine Oil by Linear Sweep Voltammetry ) |
| ANSI/ASTM D6811-2002 |
在湍流條件下測量航空器渦輪機燃料的熱穩定性的試驗方法 |
(Test Method of Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HIRETS Method) ) |
| ANSI/ASTM D6812-2002 |
評價渦輪增壓器/增加負荷量的火花點燃飛行器發電機地面站辛烷的實施規程 |
(Practice for Ground-Based Octane Rating Turbocharged/Supercharged Spark Ignition Aircraft Engines ) |
| ANSI/ASTM D6813a-2002 |
活塞泵用液壓油性能評定指南 |
(Guide for the Performance Evaluation of Hydraulic Fluids for Piston Pumps ) |
| ANSI/ASTM D6819-2002 |
用烘干爐曝光裝置測定打印紙和書寫紙的加速溫度老化的試驗方法 |
(Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus ) |
| ANSI/ASTM D6821-2002 |
測定恒定剪切應力粘度計中傳動線路潤滑劑粘度的試驗方法 |
(Test Method for Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer ) |
| ANSI/ASTM D6822-2002 |
用溫差比重計法測定原有和液化石油產品的密度、相對密度和API重量的試驗方法 |
(Test Method for Density, Relative Density and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method ) |
| ANSI/ASTM D6823-2002 |
摻有廢潤滑油的商用鍋爐燃料標準規范 |
(Standard Specification for Commercial Boiler Fuels with Used Lubricating Oils ) |
| ANSI/ASTM D6824-2003 |
測定航空燃氣渦輪發動機燃料的可濾性 |
(Determining Filterability of Aviation Turbine Fuel ) |
| ANSI/ASTM D6833-2002 |
用污染室曝露裝置測定打印紙和書寫紙加速污染老化的試驗方法 |
(Test Method for Accelerated Pollutant Aging of Printing and Writing Paper by Pollution Chamber Exposure Apparatus ) |
| ANSI/ASTM D6837-2004 |
乘用車和輕型貨車VIB序列火花點火發動機中汽車機油節油效果測量的試驗方法 |
(Test Method for Measurement of the Effects of Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIB Spark Ignition Engine ) |
| ANSI/ASTM D6837-2005 |
測量乘用車和輕型貨車VIB序列火花點火發動機中汽車機油節油效果的試驗方法 |
|
| ANSI/ASTM D6838-2002 |
Cummins M11濃積炭試驗的試驗方法 |
(Test Method for Cummins M11 High Shoot Test ) |
| ANSI/ASTM D6838-2004 |
Cummins M11濃積炭試驗的試驗方法 |
|
| ANSI/ASTM D6839-2002 |
氣相色譜法測定火花點火發動機燃料中烴類、氧飽和化合物及苯含量的試驗方法 |
(Test Method for Hydrocarbons Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography ) |
| ANSI/ASTM D6849-2002 |
液化石油氣試驗方法用簡易氣瓶中液化石油氣的儲存和使用實施規范 |
(Practice for Storage and Use of LPG in Sample Cylinders for LPG Test Methods ) |
| ANSI/ASTM D6850-2003 |
水中篩選法的Qc指南 |
(Guide for Qc of Screening Methods in Water ) |
| ANSI/ASTM D6855-2003 |
靜態模式下5Ntu以下的渾濁度的測定的試驗方法 |
(Test Method for Determination of Turbidity Below 5 Ntu in Static Mode ) |
| ANSI/ASTM D6864-2003 |
實心彩色塑料壁板產品的顏色和外觀保持性規范 |
(Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products ) |
| ANSI/ASTM D6879-2003 |
色漆和清漆.擺桿阻尼試驗 |
(Paints and Varnishes - Pendulum Damping Test ) |
| ANSI/ASTM D6888-2003 |
用氣體擴散分離和電流計探測法對有效氰化物進行配位位移和流量注入分析的試驗方法 |
(Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection ) |
| ANSI/ASTM D6888-2004 |
用氣體擴散分離和電流計探測法對有效氰化物進行配位位移和流量注入分析的試驗方法 |
|
| ANSI/ASTM D6889-2003 |
用固相微萃取法(SPME)篩分水中揮發性化合物的實施規程 |
(Practice for Screening for Volatile Organic Compounds in Water Using Solid Phase Microextration (SPME) ) |
| ANSI/ASTM D689-2003 |
紙的內部抗撕裂性的試驗方法 |
(Test Method for Internal Tearing Resistance of Paper ) |
| ANSI/ASTM D6890-2004 |
用等容室燃燒法測定柴油燃料油的滯燃期和導出十六烷值(DCN)的試驗方法 |
|
| ANSI/ASTM D6890a-2003 |
用等容室中燃燒法測定柴油燃料的著火落后期和導出十六烷值(DCN)的試驗方法 |
(Test Method for the Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber ) |
| ANSI/ASTM D6891-2003 |
順序Iva火花點火發動機中汽車發動機油評定的試驗方法 |
(Test Method for Evaluation of Automotive Engine Oils in the Sequence Iva Spark-ignition Engine ) |
| ANSI/ASTM D6892-2003 |
石油制品傾點的試驗方法(自動傾斜法) |
(Test Method for Pour Point of Petroleum Products (robotic Tilt Method) ) |
| ANSI/ASTM D6894-2003 |
直接噴射式渦輪增壓汽車柴油發動機中機油的充氣阻力評價的試驗方法 |
(Test Method for Evaluation of the Aeration Resistance of Engine Oils in a Direct-injected Turbocharged Automotive Diesel Engine ) |
| ANSI/ASTM D6895-2003 |
重型柴油放出油在100℃時旋轉粘度的試驗方法 |
(Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 C ) |
| ANSI/ASTM D6896-2003 |
低溫下廢機油的屈服應力和表觀粘度測定的試驗方法 |
(Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature ) |
| ANSI/ASTM D6897-2003 |
液化石油氣(LPG)蒸氣壓力的試驗方法(膨脹法) |
(Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method) ) |
| ANSI/ASTM D6897-2004 |
液化石油氣(LPG)蒸氣壓力的試驗方法(膨脹法) |
|
| ANSI/ASTM D6898-2003 |
用噴油泵裝置評價柴油潤滑性的試驗方法 |
(Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig ) |
| ANSI/ASTM D6908-2003 |
水過濾膜系統的一體測試實用規程 |
(Practice for Integrity Testing of Water Filtration Membrane Systems ) |
| ANSI/ASTM D6920-2003 |
用氧化燃燒和電化學探測法測量石腦油、餾出液、重整汽油、柴油、生物柴油和發動機燃料中硫總含量的試驗方法 |
(Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection ) |
| ANSI/ASTM D6922-2003 |
汽車發動機中均勻性和可混性測量的試驗方法 |
(Test Method for Measuring Homogeneity and Miscibility in Automotive Engine ) |
| ANSI/ASTM D6923-2003 |
高速單缸柴油發動機中機油的評價的試驗方法.卡特皮勒IR試驗規程 |
(Test Method for Evaluation of Engine Oils in a High Speed, Single-cylinder Diesel Engine-caterpillar IR Test Procedure ) |
| ANSI/ASTM D6973-2004 |
高壓定容葉輪泵中石油液壓液耐磨特性指示的試驗方法 |
|
| ANSI/ASTM D6973-2005 |
高壓定容葉輪泵中石油液壓液耐磨特性指示的試驗方法 |
|
| ANSI/ASTM D6984-2005 |
評價序列IIIF火花點火發動機中汽車機油的試驗方法 |
|
| ANSI/ASTM D6987-2005 |
評價T-10排氣再循環柴油發動機中柴油的試驗方法 |
|
| ANSI/ASTM D6994-2004 |
用UV探測陰離子交換色譜法測定廢水、地表水、地下水和飲用水中金屬氰化混合物的試驗方法 |
|
| ANSI/ASTM D7038-2004 |
機動車齒輪潤滑劑耐濕腐蝕性評價的試驗方法 |
|
| ANSI/ASTM D7038-2005 |
機動車齒輪潤滑劑耐濕腐蝕性評定的試驗方法 |
|
| ANSI/ASTM D7039-2004 |
用單色波長色散X射線熒光光譜法測定汽油和柴油中硫的試驗方法 |
|
| ANSI/ASTM D7040-2004 |
用感應耦合等離子體原子輻射光譜測定法測定Gf 4潤滑油中低能磷的試驗方法 |
|
| ANSI/ASTM D7041-2004 |
用火焰光度檢測的聯機氣相色譜法測定輕質烴類、機動車燃料和燃油中硫的總含量的試驗方法 |
|
| ANSI/ASTM D7042-2004 |
用Stabinger粘度計測定液體的動態粘度和密度的試驗方法(運動粘度的計算) |
|
| ANSI/ASTM D7043-2004 |
恒定容積葉輪泵中石油和非石油液壓液的耐磨性指示的試驗方法 |
|
| ANSI/ASTM D7043a-2004 |
固定容量離心泵中石油和非石油液壓液磨損特性指示的試驗方法 |
|
| ANSI/ASTM D7058-2004 |
用便攜式可見光譜測定儀評估航空渦輪燃料和煤油的賽波特顏色和測定紅色染料濃度的標準試驗方法 |
|
| ANSI/ASTM D7059-2004 |
用多維氣相色譜法測定原油中甲醇的試驗方法 |
|
| ANSI/ASTM D7060-2004 |
測定剩余和重型燃料油的膠溶能力和最大絮凝率的試驗方法(光學檢測法) |
|
| ANSI/ASTM D7060-2005 |
測定剩余和重燃料油的最大絮凝率和膠溶能力的試驗方法(光學檢測法) |
|
| ANSI/ASTM D7061-2004 |
用光學掃描裝置測量作為可分性值的含瀝青重型燃料油的N-庚烷感應相位分離的試驗方法 |
|
| ANSI/ASTM D7061-2005 |
用光學掃描裝置測量作為可分性值的含瀝青重燃料油的N-庚烷感應相位分離的試驗方法 |
|
| ANSI/ASTM D7066-2004 |
用紅外測定法測定三氟氯乙烯(s-316)可回收石油和潤滑脂及非極性材料的二聚物/三聚物的試驗方法 |
|
| ANSI/ASTM D7097-2005 |
用熱氧化機油模擬試驗測定中等高溫活塞沉積物的試驗方法.Teost Mht |
|
| ANSI/ASTM D7098-2005 |
用薄膜氧吸收(tfout)1催化劑B2測定潤滑劑氧化穩定性的試驗方法 |
|
| ANSI/ASTM D7110-2005 |
低溫下測定已用機油和含煙機油的粘性-溫度關系的試驗方法 |
|
| ANSI/ASTM D7111-2005 |
用感應耦合等離子體原子發射光譜法(icp-aes)1測定中間餾出燃料痕量素的標準試驗方法 |
|
| ANSI/ASTM D7171-2005 |
用低分辨率核磁共振光譜法測定石油產品中間餾份中氫含量的標準試驗方法 |
|
| ANSI/ASTM D721a-2002 |
石油蠟中石油含量的試驗方法 |
(Test Method for Oil Content of Petroleum Waxes (05.01, 15.09) ) |
| ANSI/ASTM D779-2003 |
用干式指示計法對紙和紙板及其它薄板材料耐水性的試驗方法 |
(Test Method For Water Resistance Of Paper, Paperboard, And Other Sheet Materials By The Dry-Indicator Method ) |
| ANSI/ASTM D790-2003 |
未增強和增強塑料及電絕緣材料撓曲性能的試驗方法 |
(Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials (08.01) ) |
| ANSI/ASTM D828-2002 |
紙和紙板抗扯裂強度的試驗方法 |
(Test Method for Tensile Properties of Paper and Paperboard Using ) |
| ANSI/ASTM D857-2002 |
水中鋁的試驗方法 |
(Test Method for Aluminum in Water ) |
| ANSI/ASTM D858-2002 |
水中鎂的試驗方法 |
(Test Methods for Manganese in Water ) |
| ANSI/ASTM D86-2003 |
大氣壓下石油產品蒸餾的試驗方法 |
(Test Method for Distillation of Petroleum Products at Atmospheric Pressure ) |
| ANSI/ASTM D86-2004 |
大氣壓下石油產品蒸餾的試驗方法 |
|
| ANSI/ASTM D86-2004 |
大氣壓下石油產品蒸餾的試驗方法 |
|
| ANSI/ASTM D86-2005 |
大氣壓下石油產品蒸餾的試驗方法 |
|
| ANSI/ASTM D873-2002 |
航空燃料氧化穩定性的試驗方法.潛在剩余法 |
(Test Method for Oxidation Stability of Aviation Fuels Potential Residue Method ) |
| ANSI/ASTM D892-2003 |
潤滑油起泡末特性的試驗方法 |
(Test Method for Foaming Characteristics of Lubricating Oils ) |
| ANSI/ASTM D893-2005 |
已用潤滑油中不溶物質的試驗方法 |
|
| ANSI/ASTM D91-2002 |
潤滑油的沉淀值測試方法(05.01) |
(Test Method for Precipitation Number of Lubricating Oils (05.01) ) |
| ANSI/ASTM D910-2003 |
航空汽油規范(05.01) |
(Specification for Aviation Gasolines (05.01) ) |
| ANSI/ASTM D92-2002 |
用克利夫蘭得開杯測定閃點和著火點的試驗方法 |
(Flash and Fire Points by Cleveland Open Cup, Method of Test for (04.04, 05.01, 10.03) ) |
| ANSI/ASTM D92-2005 |
用克利夫蘭得開杯試驗器測定閃點和著火點的試驗方法 |
|
| ANSI/ASTM D938-2004 |
石油蠟(包括凡士林)凝固點的試驗方法 |
|
| ANSI/ASTM D93a-2002 |
用潘斯基-馬丁斯閉杯試驗器測定閃點的試驗方法 |
(Test Methods for Flash-point by Pensky-Martens Closed Cup Tester ) |
| ANSI/ASTM D94-2002 |
石油產品的皂化值試驗(05.01,10.03) |
(Saponification Number of Petroleum Products, Test for (05.01, 10.03) ) |
| ANSI/ASTM D942-2002 |
用氧彈法對潤滑脂的氧化穩定性的試驗方法(05.01) |
(Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Bomb Method (05.01) ) |
| ANSI/ASTM D943-2002 |
防腐蝕礦物油氧化特性的試驗方法 |
(Test Method for Oxidation Characteristics of Inhibited Mineral Oils ) |
| ANSI/ASTM D943-2004 |
防腐蝕礦物油氧化特性的試驗方法 |
|
| ANSI/ASTM D95-2005 |
蒸餾法測定石油產品和瀝青材料含水量的試驗方法 |
|
| ANSI/ASTM D97-2004 |
傾點的試驗方法 |
|
| ANSI/ASTM D97-2005 |
石油產品傾點的試驗方法 |
|
| ANSI/ASTM D974-2002 |
顏色指示器滴定法測量酸值和基本值的試驗方法(05.01) |
(Neutralization Number by Color-Indicator Titration, Method of Test for (05.01) ) |
| ANSI/ASTM D975-2003 |
柴油機燃料油規范 |
(Specification for Diesel Fuel Oils (05.01) ) |
| ANSI/ASTM D975-2004 |
柴油燃料油規范 |
|
| ANSI/ASTM D976-2004 |
餾出物十六烷值指數的計算方法 |
|
| ANSI/ASTM D976a-2004 |
餾分燃料正十六烷指數計算的試驗方法 |
|
| ANSI/ASTM E 1000-1996 |
射線檢查指南 |
Guide for Radioscopy |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com