標準號 |
中文名稱 |
英文名稱 |
| ASTM D 358-1998 |
涂料耐大氣老試驗用木片 |
Wood to Be Used as Panels in Weathering Tests of Coatings |
| ASTM D 3580-1995 |
產品振動實驗的試驗方法(垂直正弦曲線運動) |
Test Method of Vibration (Vertical Sinusoidal Motion) Test of Products |
| ASTM D 3581-1996 |
硅酸鹽水泥混凝土和焦油混凝土鋪面用抗噴氣燃料型熱澆填縫密封料 |
Joint Sealant, Hot-Poured, Jet-Fuel-Resistant Type for Portland Cement Concrete and Tar-Concrete Pavements |
| ASTM D 3584-1983 |
施工用土壤和巖石的檢索文件和報告規程 |
Indexing Papers and Reports on Soil and Rock for Engineering Purposes |
| ASTM D 3585-1998 |
ASTM參考冷卻劑 |
ASTM Reference Coolant |
| ASTM D 3588-1998 |
氣體燃料熱值及比重和相對密度的計算 |
Calculating Heat Value, Compressibility Factor and Relative Density (Specific Gravity) of Gaseous Fuels |
| ASTM D 3590-1989 |
水中氮總數的基耶達爾試驗方法 |
Test Methods for Total Kjeldahl Nitrogen in Water |
| ASTM D 3591-1997 |
測定按配方制造的化合物中聚氯乙烯的對數粘度的試驗方法 |
Test Method for Determining Logarithmic Viscosity Number of Poly (Vinyl Chloride) (PVC) in Formulated Compounds |
| ASTM D 3594-1993 |
乙烯丙烯酸乙酯共聚物中共聚丙烯酸乙酯含量的試驗方法 |
Test Method for Copolymerized Ethyl Acrylate in Ethylene-Ethyl Acrylate Copolymers |
| ASTM D 3595-2002 |
聚三氟氯乙烯擠壓塑料薄板及薄膜標準規范 |
Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film |
| ASTM D 3596-1992 |
一般用聚氯乙烯樹脂中凝膠(斑點)的測量規程 |
Determination of Gels (Fisheyes) in General-Purpose Poly(Vinyl Chloride) (PVC) Resins |
| ASTM D 3597-1995 |
植絨機織裝飾物的標準規范 |
Standard Specification for Woven Upholstery Fabrics-Plain, Tufted, or Flocked |
| ASTM D 3598-1989 |
合成清潔劑中的檸檬酸酯的試驗方法 |
Test Method for Citrate in Synthetic Detergents |
| ASTM D 36-1995 |
瀝青軟化點試驗方法(瀝青軟化點測定器) |
Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
| ASTM D 360-1989 |
紫膠清漆規范 |
Shellac Varnishes |
| ASTM D 3601-1988 |
水介質中泡沫的試驗方法(瓶試法) |
Test Method for Foam in Aqueous Media (Bottle Test) |
| ASTM D 3603-1993 |
水存在下汽輪機油防銹特性的試驗方法(水平圓盤法) |
Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method) |
| ASTM D 3605-2000 |
原子吸收和火焰發散分光光度法測定氣輪機燃料中痕量金屬的標準試驗方法 |
Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy |
| ASTM D 3606-1999 |
氣相色譜法測定成品摩托車和飛機汽油中苯和甲苯含量的試驗方法 |
Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography |
| ASTM D 3607-1997 |
汽提法從用過的發動機機油中脫除揮發性雜質的試驗方法 |
Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping |
| ASTM D 3608-1995 |
用griss-saltzman反應法測定大氣中氧化氮含量的試驗方法 |
Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction |
| ASTM D 3609-1996 |
使用滲透管校準技術 |
Calibration Techniques Using Permeation Tubes |
| ASTM D 3610-2000 |
電位滴定法測定氧化鋁基鈷-鉬催化劑中總鈷含量的標準試驗方法 |
Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method |
| ASTM D 3611-1989 |
壓合帶的加速老化試驗 |
Accelerated Aging of Pressure-Sensitive Tapes |
| ASTM D 3612-2001 |
用氣相色譜法分析電絕緣油中不溶氣體的標準試驗方法 |
Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography |
| ASTM D 3613-1998 |
水含量測定和氣體分析用電絕緣油的取樣試驗方法 |
Test Methods of Sampling Electrical Insulating Oils for Gas Analysis and Determination of Water Content |
| ASTM D 3614-1997 |
從事大氣和發射物取樣和分析的實驗室評定的規程 |
Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions |
| ASTM D 3616-1995 |
測定生橡膠的凝膠體,膨用指數及衡釋溶液粘度的試驗方法 |
Test Method for Rubber, Raw - Determination of Gel, Swelling Index and Dilute Solution Viscosity |
| ASTM D 3617-1983 |
新組合屋面薄膜的抽樣和分析方法 |
Sampling and Analysis of New Built-up Roof Membranes |
| ASTM D 3618-1985 |
涂料和干漆膜中鉛的試驗方法 |
Test Method for Detection of Lead in Paint and Dried Paint Films |
| ASTM D 3619-1977 |
硅酸鋁顏料(無水) |
Aluminum Silicate Pigments (Anhydrous) |
| ASTM D 3620-1998 |
冰乙酸 |
Glacial Acetic Acid |
| ASTM D 3622-1995 |
正丙醇規格 |
Standard Specification for 1-Propanol (n-Propyl Alcohol) |
| ASTM D 3623-1978 |
在淺浸狀態下防污板的試驗方法 |
Testing Antifouling Panels in Shallow Submergence |
| ASTM D 3624-1985 |
用原子吸收分光光度法測定涂料中低濃度汞的試驗方法 |
Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy |
| ASTM D 3625-1996 |
用開水測試水對瀝青涂層集料的影響的方法 |
Standard Test Method for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water |
| ASTM D 3626-1985 |
氣態-液態色譜法測定焦油酸組成的試驗方法 |
Test Method for Tar Acid Composition by Gas-Liquid Chromatography |
| ASTM D 3627-1996 |
甲苯基酸(C系列標準)顏色的試驗方法 |
Test Method for Color of Cresylic Acids (C Series Standards) |
| ASTM D 3628-1997 |
乳化瀝青的選擇和使用 |
Selection and Use of Emulsified Asphalts |
| ASTM D 3629-1999 |
橡膠性能的試驗方法.抗割紋增大的試驗方法 |
Test Method for Rubber Property - Cut Growth Resistance |
| ASTM D 363-1990 |
磷酸三甲苯酯規格 |
Tricresyl Phosphate |
| ASTM D 3630-1989 |
測定保護涂層中有害成分的方法 |
Determining Constituents Classified as Hazardous Contained in Protective Coatings |
| ASTM D 3631-1999 |
測量地面大氣壓的標準試驗方法 |
Standard Test Methods for Measuring Surface Atmospheric Pressure |
| ASTM D 3632-1998 |
用氧壓法加速粘結接頭老化的試驗方法 |
Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method |
| ASTM D 3633-1998 |
薄膜鋪面系統電阻率的測試方法 |
Test Method for Electrical Resistivity of Membrane-Pavement Systems |
| ASTM D 3634-1999 |
測定發動機冷卻劑中痕量氯離子的試驗方法 |
Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 3635-2001 |
用原子吸收分光光度法測定電絕緣油中溶解的銅含量的標準試驗方法 |
Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry |
| ASTM D 3636-1999 |
固體電絕緣材料的取樣及質量評定的標準操作規程 |
Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials |
| ASTM D 3637-1984 |
瀝青混合物滲透率的試驗方法 |
Test Methods for Permeability of Bituminous Mixtures |
| ASTM D 3638-1993 |
電絕緣材料的比較留痕跡指數的試驗方法 |
Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ASTM D 3639-1992 |
用魁北克試驗對石棉分類的試驗方法 |
Test Method for Classification of Asbestos by Quebec Test |
| ASTM D 3641-1997 |
熱模塑和擠塑材料的噴射模塑法試樣 |
Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials |
| ASTM D 3642-1998 |
某些堿溶性樹脂軟化點的試驗方法 |
Test Method for Softening Point of Certain Alkali-Soluble Resins |
| ASTM D 3643-1998 |
某些堿溶性樹脂酸值的試驗方法 |
Test Method for Acid Number of Certain Alkali-Soluble Resins |
| ASTM D 3644-1998 |
苯乙烯-馬來酐樹脂酸值的試驗方法 |
Test Method for Acid Number of Styrene-Maleic Anhydride Resins |
| ASTM D 3645-1997 |
水中鈹含量的試驗方法 |
Test Methods for Beryllium in Water |
| ASTM D 3647-1984 |
根據組成對增強塑料拉制型材的分類 |
Classifying Reinforced Plastic Pultruded Shapes According to Composition |
| ASTM D 3648-1995 |
放射性物質的測量 |
the Measurement of Radioactivity |
| ASTM D 3649-1998 |
水的高分辯率γ射線光譜測定法的試驗方法 |
Test Method for High-Resolution Gamma-Ray Spectrometry of Water |
| ASTM D 365-1984 |
可溶性硝酸纖維素基溶液的試驗方法 |
Test Methods for Soluble Nitrocellulose Base Solutions |
| ASTM D 365-2001 |
可溶性硝酸纖維素基溶液的標準指南 |
Standard Guide for Soluble Nitrocellulose Base Solutions |
| ASTM D 3650-1993 |
用螢光分析法比較水中石油潤滑油的方法 |
Test Method for Comparison of Waterborne Petroleum Oils by Fluorescence Analysis |
| ASTM D 3651-1996 |
微咸水,海水和鹽水中鋇含量的試驗方法 |
Test Method for Barium in Brackish Water, Seawater and Brines |
| ASTM D 3652-1993 |
壓合膠帶的厚度試驗方法 |
Test Method for Thickness of Pressure-Sensitive and Gummed Tapes |
| ASTM D 3652/D 3652M-1993 |
壓敏膠紙帶和膠粘帶厚度的標準試驗方法 |
Standard Test Method for Thickness of Pressure-Sensitive and Gummed Tapes |
| ASTM D 3652M-1993 |
壓合膠帶的厚度試驗方法(米制) |
Test Method for Thickness of Pressure-Sensitive and Gummed Tapes (Metric) |
| ASTM D 3677-1990 |
用紅外線分光光度法鑒別橡膠的試驗方法 |
Test Methods for Rubber - Identification by Infrared Spectrophotometry |
| ASTM D 3678-1997 |
硬質聚氯乙烯定形擠壓件 |
Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
| ASTM D 3679-2001 |
硬質聚氯乙烯檔板的標準規范 |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
| ASTM D 3679c-2001 |
硬質聚氯乙烯檔板的標準規范 |
Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
| ASTM D 368-1989 |
雜酚油及油質防腐劑比重的試驗方法 |
Test Method for Specific Gravity of Creosote and Oil-Type Preservatives |
| ASTM D 3680-1989 |
溶液噴注技術測定聚乙烯化合物及共聚物中殘留氯乙烯單體含量的試驗方法 |
Test Method for Residual Vinyl Chloride Monomer Content of Poly(Vinyl Chloride) Resins, Compounds and Copolymers by Solution Injection Technique |
| ASTM D 3681-2001 |
在撓曲條件下玻璃纖維增強熱固樹脂管耐化學腐蝕的標準試驗方法 |
Standard Test Method for Chemical Resistance of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition |
| ASTM D 3682-1996 |
原子吸收法測定煤和焦炭灰燼中主要和次要素的試驗方法 |
Test Method for Major and Minor Elements in Coal and Coke Ash by Atomic Absorption |
| ASTM D 3683-1994 |
原子吸收法測定煤和焦炭灰燼中痕量素的試驗方法 |
Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption |
| ASTM D 3684-1994 |
用氧彈燃燒原子吸收法測定煤中總汞量的試驗方法 |
Test Method for Total Mercury in Coal by the Oxygen Bomb Combustion/Atomic Absorption Method |
| ASTM D 3685/D 3685M-1998 |
煙道氣中微型顆粒的抽樣和定義的試驗方法 |
Test Methods for Sampling and Determination of Particulate Matter in Stack Gases |
| ASTM D 3686-1995 |
用收集有機化合物蒸氣進行大氣取樣的規程(活性碳吸附法) |
Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method) |
| ASTM D 3687-1995 |
用活性碳管吸附法收集的有機化合物蒸氣的分析規程 |
Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method |
| ASTM D 3689-1990 |
單個樁的靜態軸向拉力荷載的試驗方法 |
Test Method for Individual Piles Under Static Axial Tensile Load |
| ASTM D 369-1984 |
雜酚油餾份與殘渣比重的測試方法 |
Test Method for Specific Gravity of Creosote Fractions and Residue |
| ASTM D 3690-1995 |
涂乙烯及涂氨基甲酸乙酯的室內裝飾織物的性能規格 |
Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics - Indoor |
| ASTM D 3691-1995 |
機織的,編織的和針織的家用窗簾織物與裝飾織物的性能規格 |
Performance Specification for Woven, Lace and Knit Household Curtain and Drapery Fabrics |
| ASTM D 3692-1989 |
標簽標明衣物及家用裝飾物用拉鏈的選擇規定 |
Selection of Zippers for Care-Labeled Apparel and Household Furnishings |
| ASTM D 3694-1996 |
樣品容器的準備及有機成份保存的規程 |
Preparation of Sample Containers and for Preservation of Organic Constituents |
| ASTM D 3695-1995 |
用直接水噴注氣體色譜法測定水中揮發性醇類含量的試驗方法 |
Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography |
| ASTM D 3696-1995 |
鑒定變味魚肉的流出污物的規程 |
Evaluating an Effluent for Flavor Impairment to Fish Flesh |
| ASTM D 3697-1992 |
水中銻含量的試驗方法 |
Test Method for Antimony in Water |
| ASTM D 3698-1999 |
溶劑蒸氣脫脂操作方法 |
Solvent Vapor Degreasing Operations |
| ASTM D 3699-2001 |
煤油標準規范 |
Standard Specification for Kerosine |
| ASTM D 370-1984 |
油質防腐劑脫水作用的試驗方法 |
Test Method for Dehydration of Oil-Type Preservations |
| ASTM D 3700-2001 |
用浮動活塞柱獲取LPG樣品的標準實施規程 |
Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder |
| ASTM D 3701-2001 |
低分辨核磁共振光譜法測定航空渦輪機燃料中氫含量的標準試驗方法 |
Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry |
| ASTM D 3702-1994 |
止推墊試驗機測定無潤滑磨擦接觸中材料磨損速率的試驗方法 |
Test Method for Wear Rate of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine |
| ASTM D 3703-1999 |
測定航空燃氣渦輪發動機用燃料過氧化值的試驗方法 |
Test Method for Peroxide Number of Aviation Turbine Fuels |
| ASTM D 3704-1996 |
在擺動運動中使用法列克司環和塊磨擦試驗機測定潤滑脂防磨性的試驗方法 |
Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion |
| ASTM D 3705-1986 |
流體潤滑劑起霧性能的試驗方法 |
Test Method for Misting Properties of Lubricating Fluids |
| ASTM D 3706-1988 |
扁簧試驗法測定蠟與聚合物的混合物熱沾著性的試驗方法 |
Test Method for Hot Tack of Wax-Polymer Blends by the Flat Spring Test |
| ASTM D 3707-1989 |
耐熱試驗法測定油包水乳液貯存穩定性的試驗方法 |
Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method |
| ASTM D 3708-1988 |
在幕簾涂蠟過程中用蠟量的試驗方法 |
Test Method for Weight of Wax Applied During Curtain Coating Operation |
| ASTM D 3709-1989 |
在低溫至室溫循環條件下油包水乳液穩定性的試驗方法 |
Test Method for Stability of Water-In-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions |
| ASTM D 371-1989 |
表面有礦物顆粒的寬邊鋪頂瀝青卷材(有機氈)規格 |
Asphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules; Wide Selvage |
| ASTM D 3710-1995 |
氣相色譜法測定汽油和汽油餾分沸程分布的試驗方法 |
Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography |
| ASTM D 3711-1995 |
液體在薄膜和蒸汽中沉積傾向的試驗方法 |
Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors |
| ASTM D 3712-1991 |
液體色譜法分析油溶性石油磺酸鹽的試驗方法 |
Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography |
| ASTM D 3713-1995 |
用小火焰測量實芯塑料對燃燒反應的試驗方法 |
Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame |
| ASTM D 3715-1993 |
壓合帶的質量保證規程 |
Quality Assurance of Pressure-Sensitive Tapes |
| ASTM D 3715/D 3715M-1998 |
壓敏帶的質量保證 |
Quality Assurance of Pressure-Sensitive Tapes |
| ASTM D 3715M-1993 |
壓合帶的質量保證規程(米制) |
Quality Assurance of Pressure-Sensitive Tapes (Metric) |
| ASTM D 3716-1999 |
地板拋光劑用乳化聚合物的標準試驗方法 |
Standard Test Methods for Use of Emulsion Polymers in Floor Polishes |
| ASTM D 3717-1985 |
用原子吸收分光光度法測定涂料中低濃度銻的試驗方法 |
Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy |
| ASTM D 3718-1985 |
用原子吸收分光光度法測定涂料中低濃度鉻的試驗方法 |
Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy |
| ASTM D 3719-1995 |
外用涂漆板上收集污物的試驗方法 |
Test Method for Quantifying Dirt Collection on Coated Exterior Panels |
| ASTM D 372-2000 |
電絕緣用經處理軟套管的標準規范 |
Standard Specification for Flexible Treated Sleeving Used for Electrical Insulation |
| ASTM D 3720-1990 |
X射線衍射法測定二氧化鈦顏料中銳鈦和金紅石比率的試驗方法 |
Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction |
| ASTM D 3723-1984 |
低溫灰化法測定水性乳化漆中顏料含量的試驗方法 |
Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing |
| ASTM D 3724-1982 |
合成氧化鐵棕顏料 |
Synthetic Brown Iron Oxide Pigment |
| ASTM D 3725-1978 |
氣態-液態色層分離法半定量測定干油及干油脂肪酸中魚油的試驗方法 |
Test Method for Semiquantitative Determination of Fish Oil in Drying Oils and Drying Oil Fatty Acids by Gas-Liquid Chromatography |
| ASTM D 3728-1999 |
2-乙氧基乙酸乙酯(99%級) |
2-Ethoxyethyl Acetate (99% Grade) |
| ASTM D 3730-1998 |
高性能內結構墻涂層試驗 |
Testing High-Performance Interior Architectural Wall Coatings |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com