標準號 |
中文名稱 |
英文名稱 |
| ASTM D 5815-1995 |
用液相色譜法測定單面低密度聚乙烯酚氧化劑和摻合劑的標準試驗方法 |
Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Linear Low-Density Polyethylene Using Liquid Chromatograph (LC) |
| ASTM D 5816-1996 |
碳黑的標準試驗方法.多點氮吸收的外部表面積 |
Standard Test Methods for Carbon Black-External Surface Area of Multipoint Nitrogen Adsorption |
| ASTM D 5817-1996 |
碳黑,顆�？s徑和大型樣品混合用標準規程 |
Standard Practice for Carbon Black, Pelleted-Reduction and Blending of Gross Samples |
| ASTM D 5818-1995 |
從安裝損壞評估的試驗階段作地質合成物取樣的標準規程 |
Standard Practice for Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage |
| ASTM D 5819-1998 |
地質合成物耐久性經驗評估用選擇試驗方法的標準導則 |
Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability |
| ASTM D 5820-1995 |
雙縫地質薄膜的加壓氣道評定的標準規程 |
Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes |
| ASTM D 5821-2001 |
粗集料中碎顆粒百分率測定的標準試驗方法 |
Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 5822-1995 |
可膨脹約束座墊測定接縫強度的標準試驗方法 |
Standard Test Method for Determining Seam Strength in Inflatable Restraint Cushions |
| ASTM D 5823-1995 |
堆垛地面覆蓋材料的線束高度的標準試驗方法 |
Standard Test Method for Tuft Height of Pile Floor Coverings |
| ASTM D 5824-1998 |
纖維板暴露在熱和水條件下粘結強度測定的標準試驗方法 |
Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water |
| ASTM D 5826-1995 |
尺寸2至6x/7兒童身材測量表 |
Standard Tables of Body Measurements for Children, Sizes 2 to 6x/7 |
| ASTM D 5827-1995 |
用離子色譜法分析氯化物和其它陰離子的發動機冷卻劑的標準試驗方法 |
Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 5828-1997 |
輔助冷卻添加劑(SCAs)和發動機冷卻濃縮劑互換性的標準試驗方法 |
Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates |
| ASTM D 5829-1996 |
環境分析實驗室制訂培訓程序的標準導則 |
Standard Guide for Preparing a Training Program for Environmental Analytical Laboratories |
| ASTM D 5830-1995 |
用氣體色譜法在危驗廢料中溶劑分析的標準試驗方法 |
Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography |
| ASTM D 5831-1996 |
土壤中篩分燃料的標準試驗方法 |
Standard Test Method for Screening Fuels in Soils |
| ASTM D 5832-1998 |
活性炭樣本中的活性揮發物測定的標準試驗方法 |
Standard Test Method for Volatile Matter Content of Activated Carbon Samples |
| ASTM D 5833-1995 |
鋼罐的再利用,再循環和再處理的標準指南 |
Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans |
| ASTM D 5834-1995 |
固體波紋紙板的再利用,再循環和再處理的標準指南 |
Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) |
| ASTM D 5835-1995 |
自動售貨機的固定放射源抽樣的集氣測定的標準試驗 |
Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations |
| ASTM D 5836-1995 |
大氣中工作地點的2,4甲苯二異氰酸鹽,2,6二異氰酸鹽測定的標準試驗方法 |
Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method) |
| ASTM D 5837-1995 |
用高性能液體色譜法(HPLC)測試電絕緣液中呋南化合物的標準試驗方法 |
Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High- Performance Liquid Chromatography (HPLC) |
| ASTM D 5839-1996 |
能量發散X射線熒光光譜法分析危險廢油中痕量素的標準試驗方法 |
Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry |
| ASTM D 584-1996 |
原毛中羊毛含量實驗室測試方法 |
Test Method for Wool Content of Raw Wool - Laboratory Scale |
| ASTM D 5840-1995 |
用于鋪路建筑的瀝青水泥的2型聚合體改型的標準規格 |
Standard Specification for Type II Polymer Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 5841-1995 |
用于鋪路建筑的瀝青水泥的3型聚合體改型的標準規格 |
Standard Specification for Type III Polymer Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 5842-1995 |
燃料揮發性測量的抽樣和處理標準規程 |
Standard Practice for Sampling and Handling of Fuels for Volatility Measurement |
| ASTM D 5843-1995 |
用于防水的完全粘合的硫化橡膠應用的標準指南 |
Standard Guide for Application of Fully Adhered Vulcanized rubber Sheets Used in Waterproofing |
| ASTM D 5844-1998 |
評價抑制生銹用汽車發動機油的標準試驗方法(序列IID) |
Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) |
| ASTM D 5845-2001 |
用紅外線光譜法測定汽油中MTBE、ETBE、TAME、DIPE、甲醇、乙醇和叔丁醇的標準試驗方法 |
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy |
| ASTM D 5846-1999 |
使用通用氧化試驗儀器對液壓液和渦輪機油進行通用氧化試驗的標準試驗方法 |
Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus |
| ASTM D 5848-1998 |
絨紗線地板覆蓋物單位面積質量的標準試驗方法 |
Standard Test Method for Mass Per Unit Area of Pile Yarn Floor Coverings |
| ASTM D 5849-1995 |
評估改良的瀝青屋頂薄膜周期性結點變位耐力的標準試驗方法 |
Standard Test Method for Evaluating Resistance of Modified, Bituminous Roofing Membranes to Cyclic Joint Displacement |
| ASTM D 585-1997 |
紙張、紙板、纖維板和相關產品的單批取樣和驗收 |
Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard or Related Product |
| ASTM D 5850-1995 |
不完整井的網絡測定過濾系數、儲藏系數和各向異性比率的標準試驗方法(分析程序) |
Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells |
| ASTM D 5851-1995 |
設計和執行水監控方案的標準導則 |
Standard Guide for Planning and Implementing a Water Monitoring Program |
| ASTM D 5852-1995 |
噴射指示法現場或?qū)嶒?yàn)室測定土壤腐蝕性的標準試驗方法 |
Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method |
| ASTM D 5853-1995 |
原油傾點的標準測試方法 |
Standard Test Method for Pour Point of Crude Oils |
| ASTM D 5854-1996 |
石油和石油產品液體樣品的混合及處理的標準規程 |
Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products |
| ASTM D 5855-1995 |
流動井中恒定降深法測定受限非越流性或越流性含水土層過濾系統和儲藏系統的標準試驗方法(分析程序) |
Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of a Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in a Flowing Well |
| ASTM D 5856-1995 |
使用剛性壁壓縮模式磁導率計測量多孔性材料液壓導電率的標準試驗方法 |
Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter |
| ASTM D 5857-2000 |
使用ISO協議和方法學的聚合塑料注塑和擠壓材料的標準規范 |
Standard Specification for Propylene Plastic Injection and Extrusion Materials Using ISO Protocol and Methodology |
| ASTM D 5858-1996 |
使用多層彈性理論計算筑路材料原位相等彈性模量的標準導則 |
Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory |
| ASTM D 5859-1996 |
使用常變迎角試驗機測定鞋類在涂層表面上的附著力的標準試驗方法 |
Standard Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester |
| ASTM D 586-1997 |
紙中灰分的試驗方法 |
Test Method for Ash in Paper |
| ASTM D 5860-1995 |
評定防水處理對水硬水泥灰漿樣品耐冷凍影響的標準試驗方法 |
Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens |
| ASTM D 5861-1995 |
涂料粉末顆粒尺寸測量有效數的標準導則 |
Standard Guide for Significance of Particle Size Measurements of Coating Powders |
| ASTM D 5862-1999 |
評估二沖程循環渦輪增強馬力6V92TA柴油發動機中發動機油的標準試驗方法 |
Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine |
| ASTM D 5863-1995 |
火焰原子吸收分光光度法測定原油和殘余燃料中鎳、釩、鐵和鈉含量的標準試驗方法 |
Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry |
| ASTM D 5864-1995 |
測定潤滑油或其成分水中好氧生物降解的標準試驗方法 |
Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components |
| ASTM D 5865-2001 |
煤和焦炭總熱值的標準試驗方法 |
Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5865a-2001 |
煤和焦炭總熱值的標準試驗方法 |
Standard Test Method for Gross Calorific Value of Coal and Coke |
| ASTM D 5866-1995 |
棉纖維中棉結含量的標準測試方法(AFIS-N儀器) |
Standard Test Method for Neps in Cotton Fibers (AFIS-N Instrument) |
| ASTM D 5867-1995 |
用大容量?jī)x器測量棉纖維物理性能的標準試驗方法 |
Standard Test Methods for Measurement of Physical Properties of Cotton Fibers by High Volume Instruments |
| ASTM D 5868-2001 |
纖維增強塑料粘結劑的邊緣剪切粘著性標準試驗方法 |
Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding |
| ASTM D 5869-1995 |
瀝青材料的黑爐熱暴露標準規程 |
Standard Practice for Dark Oven Heat Exposure of Bituminous Materials |
| ASTM D 5870-1995 |
計算塑料牢固性參數指數的標準規程 |
Standard Practice for Calculating Property Retention Index of Plastics |
| ASTM D 5871-1998 |
環已烷原料用苯的標準規范 |
Standard Specification for Benzene for Cyclohexane Feedstock |
| ASTM D 5872-1995 |
亞表層水質探測裝置安裝和地理環境勘探的先進鉆探方法的標準指南 |
Standard Guide for Use of Casing Advancement Drilling methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 5873-1995 |
用回彈錘法對巖石硬度測定的標準試驗方法 |
Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method |
| ASTM D 5874-1995 |
測定土壤沖擊值的標準試驗方法 |
Standard Test Method for Determination of the Impact Value (IV) of a Soil |
| ASTM D 5875-1995 |
亞表層水質探測裝置安裝和地理環境取樣方法和電纜工具鉆探使用指南 |
Standard Guide for Use of Cable-Tool Drilling and Sampling methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 5876-1995 |
亞表層水質探測裝置安裝和地理環境直立旋轉鋼絲繩箱式先進鉆探方法的使用標準指南 |
Standard Guide for Use of Direct Rotary Wireline Casing advancement Drilling Methods for Ge-oenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices |
| ASTM D 5877-1995 |
基于數據分析計算的痕量素示意圖和主要離子的地下水化學分析結果表示的標準指南 |
Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams Based on Data Analytical Calculations |
| ASTM D 5878-2000 |
工程技術用巖石分級系統的使用標準指南 |
Standard Guide for Using Rock Mass Classification Systems for Engineering Purposes |
| ASTM D 5879-1995 |
現場腐化裝置的地點表面特征的標準規程 |
Standard Practice for Surface Site Characterization for On-Site Septic Systems |
| ASTM D 5880-1995 |
地下流量和傳送帶模型的制造標準指南 |
Standard Guide for Subsurface Flow and Transport Modeling |
| ASTM D 5881-1995 |
根據鐵芯頭的隨時變化用穩定邊緣井對受壓非泄漏含水土層的滲透性分析程序測定用標準試驗方法 |
Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 5882-1996 |
樁柱的低應變完整性檢測用標準試驗方法 |
Standard Test Method for Low Strain Integrity Testing of Piles |
| ASTM D 5883-1996 |
園林設計及其有關用途用上層土中礦物質修正值,旋轉窯生產的空心油巖、粘土或石片用標準指南 |
Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes |
| ASTM D 5884-1999 |
內增強地膜扯裂強度測定的標準試驗方法 |
Standard Test Method for Determining Tearing Strength of internally Reinforced Geomembranes |
| ASTM D 5885-1997 |
用壓差掃描熱量測定法對聚烯烴土工合成織物的氧化感應時間的標準測定時間 |
Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry |
| ASTM D 5886-1995 |
透過特殊用途地膜的流體滲透率測試方法選擇的標準指南 |
Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications |
| ASTM D 5887-1999 |
使用可變形墻式滲透計透過飽和土工合成織物粘土襯墊樣品指數通量測量的標準測試方法 |
Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter |
| ASTM D 5888-1995 |
土工合成織物粘土襯墊的儲存和搬運用標準指南 |
Standard Guide for Storage and Handling of Geosynthetic Clay Liners |
| ASTM D 5889-1997 |
土工合成織物粘土襯墊的質量控制標準操作規程 |
Standard Practice for Quality Control of Geosynthetic Clay Liners |
| ASTM D 589-1997 |
紙不透明度的試驗方法 |
Test Method for Opacity of Paper |
| ASTM D 5890-1995 |
土工合成織物粘土襯墊的粘土礦物成分?jǐn)U大檢索的標準測試方法 |
Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners |
| ASTM D 5891-2001 |
土工合成粘土襯的粘土成分流失的標準試驗方法 |
Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners |
| ASTM D 5892-1996 |
人行道建造用IV型石油歷青聚合物改良水泥的標準規范 |
Standard Specification for Type IV Polymer-Modified Asphalt Cement for Use in Pavement Construction |
| ASTM D 5893-1996 |
硅酸鹽水泥混凝土人行道用制冷用、單成分、化學固化硅聯接防滲漏劑的標準規范 |
Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements |
| ASTM D 5894-1996 |
鍍膜金屬暴露于紫外線和環流鹽霧的標準操作.(交替暴露在霧/干室和紫外線/濃縮室) |
Standard Practice for Cyclic Salt Fog/UV Exposure of painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
| ASTM D 5895-2001 |
機械記錄器用有機涂層烘干或硫化期間薄膜產生時間測量用標準試驗方法 |
Standard Test Methods for Measuring Times of Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| ASTM D 5896-1996 |
纖維素材料的碳水化合物分配標準試驗方法 |
Standard Test Method for Carbohydrate Distribution of Cellulosic Materials |
| ASTM D 5897-1996 |
用電位滴定轉換方法對纖維素酯中羥基百分率測定的標準試驗方法 |
Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration-Alternative Method |
| ASTM D 5898-1996 |
粘合防水屋頂標準細節的標準指南 |
Standard Guide for Standard Details for Adhered Sheet waterproofing |
| ASTM D 5899-1998 |
計算機管理系統中用橡膠化合材料用標準分類系統 |
Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems |
| ASTM D 590-1993 |
紙中石油蠟的測試方法 |
Test Method for Petroleum Wax in Paper |
| ASTM D 5900-1998 |
工業參考材料(IRM)的物理和化學特性的標準規范 |
Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM) |
| ASTM D 5901-1999 |
航空燃料凍結點的標準試驗方法(自動光學方法) |
Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) |
| ASTM D 5902-1996 |
用碘值法對氫化丁腈橡膠中殘留不科學物質橡膠測定的標準測試方法 |
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value |
| ASTM D 5903-1996 |
地下水取樣結果的制備和規劃標準指南 |
Standard Guide for Planning and Preparing for a Groundwater Sampling Event |
| ASTM D 5904-1996 |
用紫外線、過(二)硫酸鹽氧化物和薄膜導電率檢測法對水中的總含碳量、有機碳和無機碳的標準測試方法 |
Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection |
| ASTM D 5905-1998 |
代用品廢水準備的標準操作規程 |
Standard Practice for the Preparation of Substitute Wastewater |
| ASTM D 5906-1996 |
地表水深度的測量期間測量水平位置的標準指南 |
Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths |
| ASTM D 5907-1996 |
水中可過濾性和非過濾性物質的標準測試方法 |
Standard Test Method for Filterable and Nonfilterable Matter in Water |
| ASTM D 5908-1996 |
多酯非機織纖維的樹脂粘合劑分配和粘合劑浸透性分析用標準測試方法 |
Standard Test Method for Resin Binder Distribution and Binder Penetration Analysis of Polyester Nonwoven Fabrics |
| ASTM D 5909-1996 |
耐低凝點高級潤滑油浸透的氧化物干燥印刷油墨干燥時間的標準測試方法 |
Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance |
| ASTM D 5910-1996 |
用液相色譜法測定乳液聚合物中游離甲醛的標準測試方法 |
Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography |
| ASTM D 5911-1996 |
對土壤抽樣基地表識的數據單最低限度的標準實用規程 |
Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site |
| ASTM D 5912-1996 |
根據鐵芯頭的隨時變化用過阻尼井對非受壓泄漏含水土層液壓導電率的分析程序測定用標準試驗方法 |
Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug) |
| ASTM D 5913-1996 |
油漆刷可清除干凈性評定的標準測試方法 |
Standard Test Method for Evaluation of Cleanability of Paint Brushes |
| ASTM D 5916-1996 |
用薄膜過濾法從水和被翠取的沉淀物中對產氣莢膜梭菌的檢測和計算用標準測試方法 |
Standard Test Method for Detection and Enumeration of Clostridium perfringens from Water and Extracted Sediments by Membrane Filtration (MF) |
| ASTM D 5917-1999 |
用氣相色譜法和外部校驗法在單環芳香烴中跟蹤混雜物的標準試驗方法 |
Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration |
| ASTM D 5918-1996 |
土壤的凍脹和降低溶解敏感性的標準測試方法 |
Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils |
| ASTM D 5919-1996 |
在 PPB 濃縮時吸附用微縮等溫線技術對活性炭吸附能力測定用實用規程 |
Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations |
| ASTM D 5920-1996 |
用諾埃曼法各向異非承壓含水層試驗用標準測試方法(分析程序) |
Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method |
| ASTM D 5921-1996 |
定點腐爛系統成坑亞表層定位特性 |
Standard Practice for Subsurface Site Characterization of Pits for On-Site Septic Systems |
| ASTM D 5922-1996 |
地質現場調查中場地變化分析的標準導則 |
Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations |
| ASTM D 5923-1996 |
地質現場調查中可里格法選擇的標準導則 |
Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations |
| ASTM D 5924-1996 |
地質現場調查中模擬近似法選擇的標準導則 |
Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations |
| ASTM D 5925-1996 |
定點腐爛系統吸收區域輪廓斑和界限尺寸的標準實用規程 |
Standard Practice for reliminary Sizing and Delineation of Absorption Field Areas for On-Site Septic Systems |
| ASTM D 5926-2001 |
排水管、排廢水和排氣管(DWV)、下水溝、衛生設施和雨水管道系統用聚氯乙烯墊圈的標準規范 |
Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems |
| ASTM D 5927-1999 |
基于ISO試驗方法的熱塑性聚酯(TPES)的選擇和擠壓材料的標準規范 |
Standard Specification for Thermoplastic Polyester (TPES) selection and Extrusion Materials Based on ISO Test Methods |
| ASTM D 5928-1996 |
放射性廢棄物篩選標準試驗方法 |
Standard Test Method for Screening of Waste for Radioactivity |
| ASTM D 5929-1996 |
用混合物吸收計測定暴露于城區固體廢物銷毀條件用生物降解能力標準測試方法 |
Standard Test Method for Determining Biodegradability of Materials Exposed to Municipal Solid Waste Composting Conditions by Compost Respirometry |
| ASTM D 5930-1997 |
用瞬變線源技術方法對塑料熱導性的標準試驗方法 |
Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique |
| ASTM D 5931-1996 |
用數字密度計對發動機冷凍劑的濃縮和水般的發動機冷凍劑的標準測試方法 |
Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter |
| ASTM D 5932-1996 |
在工作室空氣中9-N-甲氨基甲基葸 (MAMA)對 2,4-甲苯聚氨酯(2,4-TDI)和2,6 -甲苯聚氨酯(2,6-TDI)測定的標準試驗方法 |
Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace |
| ASTM D 5933-1996 |
木結構用直經為25/8 in. 和4 in.的金屬剪切板的標準規范 |
Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com