標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM D 2898-1996 |
防火試驗用經阻燃處理的木材的加速風化方法 |
Methods for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing |
| ANSI/ASTM D 2900-1997 |
用于護套式電加熱件的電氣級氧化鎂的加速壽命試驗的方法 |
Test Method for Accelerated Life Test of Electrical Grade Magnesium Oxide as Used in Sheathed-Type Electric Heating Elements |
| ANSI/ASTM D 2902-1995 |
含氟聚合物樹脂熱縮管件規范(10.02) |
Specification for Fluoropolymer Resin Heat-Shrinkable Tubing (10.02) |
| ANSI/ASTM D 2923-2001 |
聚烯烴薄膜和薄板剛性的試驗方法(08.02) |
Test Method for Rigidity of Polyolefin Film and Sheeting (08.02) |
| ANSI/ASTM D 2924-2001 |
增強熱固性樹脂管的耐外壓力試驗(08.04) |
Reinforced Thermosetting-Resin Pipe, Test Method for External Pressure Resistance of (08.04) |
| ANSI/ASTM D 2925-2001 |
在全孔流情況下纖維玻璃(玻璃纖維增強熱固樹脂)束偏轉的試驗方法 |
Test Method for Beam Deflection of fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow |
| ANSI/ASTM D 295-1994 |
電絕緣用浸漆棉織物試驗方法 |
Method of Testing Varnish Cotton Fabrics Used for Electrical Insulation (10.01) |
| ANSI/ASTM D 2951-1995 |
3型和4型耐熱應力斷裂的聚乙烯塑料的試驗方法(95-1,13項)(08.02) |
Test Method for Resistance of Types 3 and 4 Polyethylene Plastics to Thermal Stress-Cracking (95-1, Item 13) (08.02) |
| ANSI/ASTM D 2981-1994 |
振動中粘性固體薄膜潤滑劑的耐磨損的測量方法(05.02) |
Measuring the Wear Life of Bonded Solid Film Lubricants in Oscillating Motion, Test Method for (05.02) |
| ANSI/ASTM D 2982-1985 |
潤滑油中使用的乙二醇基防凍劑的檢測方法(05.02) |
Detecting Glycol-Base Antifreeze in Used Lubricating Oils, Method of Test for (05.02) |
| ANSI/ASTM D 2983-2001 |
用Brookfield粘度計測定機動車試驗液體潤滑劑的低溫粘度的試驗方法(05.02) |
Low-Temperature Viscosity of Automotive Test Fluid Lubricants Measured by Brookfield Viscometer, Method of Test for (05.02) |
| ANSI/ASTM D 2989-2002 |
鹵化有機溶劑及其添加劑的酸堿性的試驗方法 |
Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and their Admixtures |
| ANSI/ASTM D 2990-2001 |
塑料的張力、壓力和柔性蠕變以及蠕變斷裂的試驗方法(08.02) |
Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics (08.02) |
| ANSI/ASTM D 2992-2001 |
纖維玻璃(玻璃纖維增強熱固樹脂)管件和配件獲得靜水壓或壓力設計基礎的實施規程(08.04) |
Practice for Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings (08.04) |
| ANSI/ASTM D 2996-2001 |
繞組線纖維玻璃(玻璃纖維增強熱固樹脂)管件和配件規范(08.04) |
Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Pipe (08.04) |
| ANSI/ASTM D 2997-2001 |
纖維玻璃(玻璃纖維增強熱固樹脂)離心成形規范 |
Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ANSI/ASTM D 3000-1996 |
以外徑為基礎的聚丁烯塑料管(SDR-PR)規范 |
Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter |
| ANSI/ASTM D 3012-1995 |
用雙軸旋轉器測定丙烯塑料的熱氧化穩定性的試驗方法(08.02) |
Test Method for Thermal Oxidative Stability of Propylene Plastics, Using a Biaxial Rotator (08.02) |
| ANSI/ASTM D 3013-1994 |
環氧模制化合物規范(08.02) |
Specification for Epoxy Molding Compounds (08.02) |
| ANSI/ASTM D 3014-1994 |
在垂直位置硬質多孔塑料的火焰高度、燃燒時間和重量損耗的試驗方法(08.02) |
Test Method for Flame Height, Time of Burning, and Loss of Weight of Rigid Cellular Plastics in a Vertical Position (08.02) |
| ANSI/ASTM D 3015-1995 |
塑料化合物中顏料擴散的微觀檢驗的推薦性方法(08.02) |
Recommended Practice for Microscopical Examination of Pigment Dispersion in Plastic Compounds (08.02) |
| ANSI/ASTM D 3026-1994 |
護套式電氣加熱件用電氣級氧化鎂的燒結指數的試驗方法(10.02) |
Test Method for Sinter Index of Electrical Grade Magnesium Oxide for Use in Sheathed-Type Electrical Heating Elements (10.02) |
| ANSI/ASTM D 3029-1994 |
用撞錘(降落重量)測定硬質多孔塑料薄板或部件的耐沖擊性的試驗方法(08.02) |
Test Method for Impact Resistance of Rigid Plastic Sheeting or Parts by Means of a Tup (Falling Weight) (08.02) |
| ANSI/ASTM D 3030-1995 |
氯乙烯樹脂的揮發性物質(包括水)的試驗方法(08.02) |
Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins (08.02) |
| ANSI/ASTM D 3032-1997 |
連接線絕緣的試驗方法(10.02) |
Hookup Wire Insulation, Test Method for (10.02) |
| ANSI/ASTM D 3035-2001 |
外徑受控的聚乙烯塑料管(SPR-PR)規范 |
Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter |
| ANSI/ASTM D 3084-1996 |
水的a粒子光譜測定法實施規程 |
Practice for Alpha-Particle Spectrometry of Water |
| ANSI/ASTM D 3115-1995 |
在高剪切下航空航天合金潤滑劑的爆炸性反應的特性的試驗方法(05.02) |
Explosive Reactivity of Lubricants with Aerospace Alloys under High Shear, Method of Test for (05.02) |
| ANSI/ASTM D 3116-1989 |
汽油中鉛含量的痕量的試驗方法(05.02) |
Trace Amounts of Lead in Gasoline, Method of Test for (05.02) |
| ANSI/ASTM D 3117-1987 |
餾出燃料的蠟的外觀點的試驗方法(05.02) |
Test Method for Wax Appearance Point of Distillate Fuels (05.02) |
| ANSI/ASTM D 3120-1996 |
用氧化微庫侖分析法測定輕質液態石油烴類中硫的痕量的試驗方法 |
Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry, Method of Test for (05.02) |
| ANSI/ASTM D 3123-1994 |
低壓熱固性模制化合物的螺線流的試驗方法(08.02) |
Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds (08.02) |
| ANSI/ASTM D 3124-1998 |
用紅外光譜測定法測定聚乙烯中乙烯叉不飽和性的試驗方法 |
Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ANSI/ASTM D 3140-1996 |
擴口聚烯烴管規程 |
Practice for Flaring Polyolefin Pipe and Tubing |
| ANSI/ASTM D 3144-1995 |
電絕緣用聚乙烯叉氟熱縮管件的規范(10.02) |
Specification for Poly (Vinylidene Fluoride) Heat-Shrinkable Tubing for Electrical Insulation (10.02) |
| ANSI/ASTM D 3145-2001 |
用螺旋形線圈法測量電絕緣清漆熱耐久性的試驗方法 |
Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method |
| ANSI/ASTM D 3147-1999 |
發動機冷卻劑用止漏添加劑測試的試驗方法 |
Test Method for Testing Stop-Leak Additives for Engine Coolants |
| ANSI/ASTM D 3150-1995 |
電絕緣用交鏈和非交鏈聚氯乙烯熱縮管件的規范(10.02) |
Specification for Crosslinked and Noncrosslinked Poly (Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation (10.02) |
| ANSI/ASTM D 3154-2001 |
管道中平均流量的試驗方法(皮氏流速測定管法) |
Test Method for Average Velocity in a Duct (Pitot Tube Method) |
| ANSI/ASTM D 3159-1995 |
改良的ETFE含氟聚合物模塑和擠塑材料規范(08.03) |
Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials (08.03) |
| ANSI/ASTM D 3172-1997 |
煤和焦炭的近似分析實施規程 |
Practice for Proximate Analysis of Coal and Coke |
| ANSI/ASTM D 3176-1997 |
煤和焦炭的素分析實施規程 |
Practice for Ultimate Analysis of Coal and Coke |
| ANSI/ASTM D 3195-1990 |
轉子流量計校準的實施規程 |
Practice for Rotameter Calibration |
| ANSI/ASTM D 3201-1996 |
防火木材及木制品吸濕特性的試驗方法 |
Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Base Products |
| ANSI/ASTM D 3214-1997 |
電絕緣用涂料粉末及其涂層的試驗方法 |
Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation |
| ANSI/ASTM D 322-1992 |
汽油發動機曲軸箱油稀釋的試驗方法 |
Dilution of Gasoline Engine Crankcase Oils, Method of Test for (05.01) |
| ANSI/ASTM D 3221-1988 |
熱塑性聚對苯二甲酸酯模塑和擠塑材料規范 |
Specification for Thermoplastic Polyterephthalate Molding and Extrusion Materials |
| ANSI/ASTM D 3222-1999 |
未改性的聚偏氟乙烯模塑、擠塑和涂覆材料規范 |
Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding, Extrusion, and Coating Materials (08.03) |
| ANSI/ASTM D 3224-1996 |
木材防腐液用輔助溶劑水溶性的試驗方法 |
Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions |
| ANSI/ASTM D 3225-1996 |
油質防腐劑用低沸點烴類溶劑規范 |
Specification for Low-Boiling Hydrocarbon Solvent for Oil-Borne Preservatives |
| ANSI/ASTM D 3227-1992 |
汽油、煤油、航空渦輪和餾出燃料中硫醇的含量的試驗方法(電勢滴定法)(05.02) |
Mercaptan Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method), Method of Test for (05.02) |
| ANSI/ASTM D 3228-2001 |
用改良的基耶達法測定潤滑油中總氮量的試驗方法 |
Total Nitrogen in Lubricating Oils by Modified Kjeldahl Method, Method of Test for (05.02) |
| ANSI/ASTM D 323-1994 |
石油產品的蒸汽壓力的試驗方法(瑞德法) |
Vapor Pressure of Petroleum Products (Reid Method), Test Method for (05.01) |
| ANSI/ASTM D 3230-1989 |
用電勢滴定法測定原油中鹽的試驗方法(05.02) |
Salts in Crude Oil (Electrometric Method), Test Method for (05.02) |
| ANSI/ASTM D 3231-1994 |
測定汽油中磷的試驗方法(05.02) |
Phosphorus in Gasoline, Method of Test for (05.02) |
| ANSI/ASTM D 3232-1988 |
高溫下潤滑脂的流量特性的測量方法(05.02) |
Measurement of Flow Properties of Lubricating Greases at High Temperatures, Method for (05.02) |
| ANSI/ASTM D 3233-1993 |
液體潤滑劑的超高壓特性的測量方法(潤滑劑耐熱耐壓法)(05.02) |
Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Methods), Methods for (05.02) |
| ANSI/ASTM D 3234-1988 |
蠟覆層耐磨性的試驗方法(05.02) |
Abrasion Resistance of Wax Coatings, Test Method for (05.02) |
| ANSI/ASTM D 3235-1988 |
石蠟中溶劑性萃取物的試驗方法(05.02) |
Solvent Extractables in Petroleum Waxes, Method of Test for (05.02) |
| ANSI/ASTM D 3236-1988 |
熱熔性膠粘劑和涂層材料的表觀密度的試驗方法(05.02) |
Apparent Viscosity of Hot Melt Adhesives and Coating Materials, Method of Test for (05.02) |
| ANSI/ASTM D 3237-1990 |
用原子吸收光譜測定法測定汽油中鉛含量的試驗方法(05.02) |
Lead in Gasoline by Atomic Absorption Spectrometry, Method of Test for (05.02) |
| ANSI/ASTM D 3238-1995 |
用n-d-m法對石油進行碳分布和結構組分析的試驗方法(05.02) |
Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method, Method of Test for (05.02) |
| ANSI/ASTM D 3239-1996 |
用高電離電壓質譜法對汽油芳香餾分進行芳香類型分析的試驗方法 |
Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry (05.02) |
| ANSI/ASTM D 3240-1991 |
測定航空渦輪燃料中不溶解水的試驗方法(05.02) |
Test Method for Undissolved Water in Aviation Turbine Fuels (05.02) |
| ANSI/ASTM D 3241-2002 |
航空渦輪燃料熱氧化穩定性的試驗方法(JFTOT程序) |
Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) (05.02) |
| ANSI/ASTM D 3242-2001 |
測定航空渦輪燃料總酸度的試驗方法(05.02) |
Total Acidity in Aviation Turbine Fuel, Test Method for (05.02) |
| ANSI/ASTM D 3244-1997 |
測定符合規范的試驗數據的利用(05.02) |
Utilization of Test Data to Determine Conformance with Specifications, Practice for (05.02) |
| ANSI/ASTM D 3245-1991 |
工業燃料油的可泵抽性的試驗方法(05.02) |
Test Method for Pumpability of Industrial Fuel Oils (05.02) |
| ANSI/ASTM D 3246-1981 |
用氧化微庫侖分析法測定石油氣中硫含量(05.02) |
Sulfur in Petroleum Gas by Oxidative Microcoulometry (05.02) |
| ANSI/ASTM D 3251-1995 |
測定薄膜絕緣磁線上用的電絕緣浸漆的熱老化特性的試驗方法(10.02) |
Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire (10.02) |
| ANSI/ASTM D 3262-2001 |
增強塑料砂漿排污水管規范(08.04) |
Specification for Reinforced Plastic Mortar Sewer Pipe (08.04) |
| ANSI/ASTM D 3266-1991 |
空氣中顆粒狀酸性氣體氟的自動分離和收集的試驗方法(雙紙帶樣品法) |
Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| ANSI/ASTM D 3267-1991 |
空氣中顆粒狀可溶于水氣體氟的分離和收集的試驗方法(過濾器和空氣采集器法) |
Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
| ANSI/ASTM D 3268-1991 |
空氣中顆粒狀可溶于水氣體氟的分離和收集的試驗方法(碳酸氫鈉覆層玻璃管和顆粒過濾器法) |
Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and a Particulate Filter Method) |
| ANSI/ASTM D 3270-2001 |
空氣和植物組織中氟含量分析的試驗方法(半自動法) |
Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
| ANSI/ASTM D 3275-1991 |
E-CTFE-含氟聚合物模塑和擠塑材料規范(08.03) |
Specification for E-CTFE-Fluoropolymer Molding and Extrusion Materials (08.03) |
| ANSI/ASTM D 3288-1994 |
漆包磁線試驗方法(10.02) |
Test Methods for Magnet-Wire Enamels (10.02) |
| ANSI/ASTM D 3291-1992 |
壓力下聚氯乙烯塑料中增塑劑的兼容性的方法(08.03) |
Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics under Compression (08.03) |
| ANSI/ASTM D 3293-1991 |
PTFE樹脂模制薄板規范(08.03) |
Specification for PTFE Resin Molded Sheet (08.03) |
| ANSI/ASTM D 3294-1997 |
PTFE樹脂基礎型材規范 |
Specification for PTFE Resin Molded Basic Shapes (08.03) |
| ANSI/ASTM D 3295-2001 |
PTFE管規范 |
Specification for PTFE Tubing (08.03) |
| ANSI/ASTM D 3296-1991 |
FEP碳氟管規范(08.03) |
Specification for FEP-Fluorocarbon Tubing (08.03) |
| ANSI/ASTM D 3297-1988 |
PTFE樹脂部件的模制和加工公差的實施規程(08.03) |
Practice for Molding and Machining Tolerances for PTFE Resin Parts (08.03) |
| ANSI/ASTM D 3299-1995 |
繞組絲玻璃纖維增強熱固樹脂耐化學水箱規范(08.04) |
Specification for Filament-Wound Glass Fiber Reinforced Thermoset Resin Chemical-Resistant Tanks (08.04) |
| ANSI/ASTM D 3306-2001 |
汽車和輕載裝置乙烯乙二醇基引擎冷卻劑規范 |
Specification for Ethylene Glycol Base Engine Coolant for Automobile and Light Duty Service |
| ANSI/ASTM D 3307-2001 |
PFA碳氟模塑和擠塑材料規范 |
PFA-Fluorocarbon Molding and Extrusion Materials, Specification for (08.03) |
| ANSI/ASTM D 3308-1991 |
PTFE樹脂切削帶規范(08.03) |
Specification for PTFE Resin Skived Tape (08.03) |
| ANSI/ASTM D 3309-1996 |
聚丁烯(PB)塑料熱水配送系統規范 |
Specification for Polybutylene (PB) Plastic Hot-Water Distribution Systems |
| ANSI/ASTM D 3311-1996 |
排水、廢水及通風(DWV)塑料管配件圖樣規范 |
Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns |
| ANSI/ASTM D 3336-1991 |
高溫下滾珠軸承中潤滑脂的有效期的試驗方法(05.02) |
Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures (05.02) |
| ANSI/ASTM D 3337-1991 |
小型軸承中潤滑脂的評價方法(05.02) |
Method for Evaluation of Greases in Small Bearings (05.02) |
| ANSI/ASTM D 3338-1992 |
航空燃料熱消耗的評價方法(05.02) |
Method for Estimation of Heat of Combustion of Aviation Fuels (05.02) |
| ANSI/ASTM D 3339-1995 |
用半微量彩色指示劑滴定法測定酸度總值的試驗方法(05.02) |
Total Acid Number by Semi-Micro Color Indicator Titration, Method of Test for (05.02) |
| ANSI/ASTM D 3340-1990 |
用火焰光度計測定潤滑脂中鋰和鈉的試驗方法(05.02) |
Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (05.02) |
| ANSI/ASTM D 3341-1991 |
用氯化碘法測定汽油中鉛含量的試驗方法(05.02) |
Test Method for Lead in Gasoline-Iodine Monochloride Method (05.02) |
| ANSI/ASTM D 3342-1990 |
未用過的冷軋潤滑油在水中彌散的乳化穩定性的測量方法(05.02) |
Measuring the Emulsion Stability of New (Unused) Rolling Oil Dispersions in Water, Method of (05.02) |
| ANSI/ASTM D 3343-1995 |
航空燃料氫含量的評價方法(05.02) |
Method for Estimation of Hydrogen Content of Aviation Fuels (05.02) |
| ANSI/ASTM D 3345-1996 |
木材及其他纖維素材料防白蟻破壞的實驗室評定試驗方法 |
Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites |
| ANSI/ASTM D 3347-1994 |
護套型電氣加熱件用電氣級氧化鎂的流率和堆密度的試驗方法(10.02) |
Test Method for Flow Rate and Tap Density of Electrical Grade Magnesium Oxide for Use in Sheathed-Type Electric Heating Elements (10.02) |
| ANSI/ASTM D 3348-1992 |
在不含鉛汽油中探測鉛的快速現場試驗規范(比色劑法)(05.02) |
Specification for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (05.02) |
| ANSI/ASTM D 3349-1986 |
碳黑加色乙烯塑料薄膜的吸收系數的試驗方法(08.03) |
Carbon Black Pigmented Ethylene Plastic Film, Test Method for Absorption Coefficient of (08.03) |
| ANSI/ASTM D 3354-1996 |
用平行板法測定塑料薄膜阻擋承載力的試驗方法(08.03) |
Test Method for Blocking Load of Plastic Film by the Parallel Plate Method |
| ANSI/ASTM D 3364-1994 |
聚氯乙烯和流變不穩定的熱塑料的流率的試驗方法(08.03) |
Test Method for Flow Rates for Poly(Vinyl Chloride) and Rheologically Unstable Thermoplastics (08.03) |
| ANSI/ASTM D 3367-1995 |
在離心力下聚氯乙烯樹脂的增塑劑吸附作用的試驗方法(08.02) |
Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force (08.02) |
| ANSI/ASTM D 3368-1994 |
FEP碳氟樹脂薄板和薄膜(08.03) |
FEP Fluorocarbon Resin Sheet and Film (08.03) |
| ANSI/ASTM D 3369-2001 |
TFE碳氟樹脂鑄膜規范 |
Specification for TFE-Fluorocarbon Resin Cast Film (08.03) |
| ANSI/ASTM D 3382-1995 |
用橋技術測量由于部分放電引起的能量和集成電荷的轉換的試驗方法(10.02) |
Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques (10.02) |
| ANSI/ASTM D 3386-2000 |
電絕緣材料的線性熱膨脹系數的試驗方法 |
Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials |
| ANSI/ASTM D 3394-1994 |
電絕緣板抽樣方法(10.02) |
Methods of Sampling and Electrical Insulating Board (10.02) |
| ANSI/ASTM D 341-1989 |
液態石油產品的粘度-溫度曲線圖 |
Viscosity - Temperature Charts for Liquid Petroleum Products (05.01) |
| ANSI/ASTM D 3419-1993 |
熱固化合物試樣的直列式螺旋注入模制方法(08.03) |
In-Line Screw-Injection Molding of Test Specimens from Thermosetting Compounds, Practice for (08.03) |
| ANSI/ASTM D 3420-1995 |
塑料薄膜耐動態球充擊的試驗方法(08.02) |
Test Method for Dynamic Ball Burst (Pendulum) Impact Resistance of Plastic Film (08.02) |
| ANSI/ASTM D 3426-1995 |
用沖擊波測定實心電絕緣材料的電介質擊穿電壓和介電強度的試驗方法(10.02) |
Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves (10.02) |
| ANSI/ASTM D 3427-1986 |
石油的氣泡分離時間的試驗方法(05.02) |
Gas Bubble Separation Time of Petroleum Oils, Test Method for (05.02) |
| ANSI/ASTM D 3429-1987 |
低沸點流體中固定氣體的可溶性的試驗方法(05.02) |
Solubility of Fixed Gases in Low-Boiling Liquids, Method of Test for (05.02) |
| ANSI/ASTM D 3453-2001 |
軟質泡沫材料規范.家具、汽車軟墊、床墊及類似用途用氨基甲酸乙酯 |
Specification for Flexible Cellular Materials - Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications |
| ANSI/ASTM D 3454-1997 |
水中鐳-226的試驗方法 |
Test Method for Radium-226 in Water |
| ANSI/ASTM D 3461-1997 |
地瀝青和硬瀝青軟化點試驗方法(Mettler杯球法) |
Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-And-Ball Method) |
| ANSI/ASTM D 347-1996 |
雜酚油和煤焦油的體積和比重修正表 |
Tables for Volume and Specific Gravity Correction for Creosote and Coal Tar |
| ANSI/ASTM D 348-1995 |
用于電絕緣剛性管的測試方法 |
Test Method for Rigid Tubes Used for Electrical Insulation (10.01) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com