標準號 |
中文名稱 |
英文名稱 |
| ASTM D 546-1999 |
道路和路面材料用礦物填料的篩分 |
Sieve Analysis of Mineral Filler for Road and Paving Materials |
| ASTM D 5460-1993 |
橡膠配料標準試驗方法.橡膠添加劑中含水量的測定 |
Standard Test Method for Rubber Compounding Materials-Water in Rubber Additives |
| ASTM D 5461-1993 |
橡膠添加劑的標準試驗方法.粉末橡膠化合物濕式篩析 |
Standard Test Method for Rubber Additives-Wet Sieve Analysis of Powdered Rubber Chemicals |
| ASTM D 5462-2001 |
水中低水平溶解氧在線測量的標準試驗方法 |
Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water |
| ASTM D 5463-1998 |
水中無機成分測量用試驗盒標準導則 |
Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water |
| ASTM D 5464-1993 |
低傳導率水pH值測量的試驗方法 |
Standard Test Methods for pH Measurement of Water of Low Conductivity |
| ASTM D 5465-1993 |
由沉積法分析的水測定微生物計數的標準規程 |
Standard Practice for Determining Microbial Counts from Waters Analyzed by Plating Methods |
| ASTM D 5466-2001 |
測定大氣中揮發性有機化學物質的標準試驗方法(罐裝抽樣法) |
Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology) |
| ASTM D 5467-1997 |
使用多層組合梁的單向聚合母體復合材料壓縮特性的標準試驗方法 |
Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam |
| ASTM D 5468-1995 |
廢棄材料的總熱值和灰值的標準試驗方法 |
Standard Test Method for Gross Calorific and Ash Value of Waste Materials |
| ASTM D 5469-2000 |
新噴涂的聚氨酯泡沫和覆層屋頂系統應用的標準指南 |
Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems |
| ASTM D 5470-1995 |
空調的固定電器裝置的熱傳輸性能的標準試驗方法 |
Standard Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials |
| ASTM D 5471-1997 |
O-二甲苯980標準規范 |
Standard Specification for O-Xylene 980 |
| ASTM D 5472-1993 |
在控制井上測定比容和評定過濾系數的標準試驗方法 |
Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well |
| ASTM D 5473-1993 |
控制井部分滲透效應分析和無泄漏封閉蓄水層的水平和垂直液力傳導性測定標準試驗方法 |
Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer |
| ASTM D 5474-1993 |
地下水調查數據選擇標準導則 |
Standard Guide for Selection of Data Elements for Ground-Water Investigations |
| ASTM D 5475-1993 |
用氮磷檢測器通過氣相色譜法測定水中含氮磷殺蟲劑標準試驗方法 |
Standard Test Method for Nitrogen- and Phosphorus-Containing Pesticides in Water by Gas Chromatography with a Nitrogen-Phosphorus Detector |
| ASTM D 5476-1999 |
熱塑性聚氨酯材料的標準分類系統 |
Standard Classification System for Thermoplastic Polyurethane Materials |
| ASTM D 5477-1995 |
傅里葉變換紅外線光譜法識別聚合物層或夾雜物的標準規程 |
Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Spectroscopy (FT-IR)1 |
| ASTM D 5478-1998 |
落針粘度計測定材料粘度的標準試驗方法 |
Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer |
| ASTM D 5479-1994 |
部分浸入的船舶涂層的耐生物污垢試驗的標準規范 |
Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed |
| ASTM D 548-1997 |
紙張水溶解酸度或堿度的試驗方法 |
Test Method for Water-Soluble Acidity or Alkalinity of Paper |
| ASTM D 5480-1995 |
氣相色譜法測定發動機油揮發性標準試驗方法 |
Standard Test Method for Engine Oil Volatility by Gas Chromatography |
| ASTM D 5481-1996 |
用多孔毛細管粘度計在高溫高剪切率下測量表面粘性的標準試驗方法 |
Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
| ASTM D 5482-2001 |
石油產品蒸氣壓力的標準試驗方法(大氣的小型法) |
Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric) |
| ASTM D 5483-2002 |
用壓差掃描熱量測定法測試潤滑脂的氧化反應時間的標準試驗方法 |
Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry |
| ASTM D 5484-1994 |
鋼制網格式船橋地板的標準規范 |
Standard Specification for Steel Grid Bridge Flooring |
| ASTM D 5485-1994 |
用錐形腐蝕計測定燃燒制品的腐蝕效應的標準試驗方法 |
Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter |
| ASTM D 5486/D 5486M-1999 |
包裝、封箱和密封用壓敏帶的標準規范 |
Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| ASTM D 5487-1998 |
沖擊試驗機測定加載容器模擬跌落的標準試驗方法 |
Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines |
| ASTM D 5488-1994 |
包裝材料和包裝件環境標記的標準術語 |
Standard Terminology of Environmental Labeling of Packaging Materials and Packages |
| ASTM D 5489-2001 |
紡織品提示標簽用提示符號的標準指南 |
Standard Guide for Care Symbols for Care Instructions on Textile Products |
| ASTM D 5490-1993 |
地下水流型模擬與現場信息比較的標準導則 |
Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information |
| ASTM D 5491-1998 |
模塑和擠制材料用再生聚乙烯薄膜原料的標準分類 |
Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials |
| ASTM D 5492-1998 |
丙烯塑料中二甲苯可溶物標準試驗方法 |
Standard Test Method for Determination of Xylene Solubles in Propylene Plastics |
| ASTM D 5493-1993 |
載荷下土工織物介電常數標準試驗方法 |
Standard Test Method for Permittivity of Geotextiles Under Load |
| ASTM D 5494-1993 |
未保護和保護土木薄膜角錐穿孔強度的標準試驗方法 |
Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes |
| ASTM D 5495-1994 |
混合廢液抽樣器抽樣標準規程(COLIWASA) |
Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA) |
| ASTM D 5496-1998 |
土工合成織物現場浸漬試驗標準操作規程 |
Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM D 5497-1994 |
鈕扣術語 |
Standard Terminology Relating to Buttons |
| ASTM D 5498-2001 |
核設施噴涂工作檢驗人員培訓計劃編制標準指南 |
Standard Guide for Developing a Training Program for Coating Work Inspectors in Nuclear Facilities |
| ASTM D 5499-1994 |
煙道廢氣脫硫系統聚合物襯里耐性能熱標準試驗方法 |
Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems |
| ASTM D 5500-1998 |
進液閥門沉積形成的不含鉛自動火花點火引擎燃料的車輛評價標準試驗方法 |
Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 5501-1994 |
氣相色譜法測定變性燃料酒精中酒精含量的標準試驗方法 |
Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography |
| ASTM D 5502-2000 |
通過鋁工業生產的陽極和陰極碳物理測量確定表觀密度的標準試驗方法 |
Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry |
| ASTM D 5503-1994 |
管道儀表的天然氣抽樣處理和調節系統標準規程 |
Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation |
| ASTM D 5504-1998 |
用氣相色譜和化學發光法測定天然氣和氣體燃料中硫化物含量的標準試驗方法 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence |
| ASTM D 5505-1997 |
再循環乳化劑分類標準操作規程 |
Standard Practice for Classifying Emulsified Recycling Agents |
| ASTM D 5506-1998 |
瀝青路面材料試驗和檢查人員資格認證組織的標準操作規程 |
Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials |
| ASTM D 5507-1999 |
毛細管柱/多維氣相色譜法測定單體級氯乙烯中微量有機雜質的標準試驗方法 |
Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography |
| ASTM D 5508-1994 |
液面上毛細管氣相色譜法測定苯乙烯-丙烯腈共聚物樹脂和腈-丁二烯橡膠中殘留丙烯腈單體的標準試驗方法 |
Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC) |
| ASTM D 5509-1996 |
模擬合成環境中塑料的標準規范 |
Standard Practice for Exposing Plastics to a Simulated Compost Environment |
| ASTM D 5510-1994 |
氧化降解塑料熱老化標準規范 |
Standard Practice for Heat Aging of Oxidatively Degradable Plastics |
| ASTM D 5511-1994 |
強硬度顆粒厭氧溶解條件下測定塑性材料厭氧生物降解的標準試驗方法 |
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions |
| ASTM D 5512-1996 |
用外部加熱反應器將塑料暴露在模擬合成環境中的標準規范 |
Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor |
| ASTM D 5513-1999 |
痕量素分析用工業爐供入液流的微波溶解標準操作規范 |
Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams for Trace Element Analysis |
| ASTM D 5514-1994 |
土工合成織物的大規模靜水壓沖孔試驗標準試驗方法 |
Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics |
| ASTM D 5515-1997 |
用膨脹計測定煙煤膨脹特性的標準試驗方法 |
Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer |
| ASTM D 5516-2001 |
在高溫下阻燃處理的軟木膠合板撓性特性評定的標準試驗方法 |
Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures |
| ASTM D 5516a-2001 |
在高溫下阻燃處理的軟木膠合板撓性特性評定的標準試驗方法 |
Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures |
| ASTM D 5517-1996 |
工美材料中金屬淬取性測定的標準試驗方法 |
Standard Test Method for Determining Extractability of Metals from Art Materials |
| ASTM D 5518-1994 |
為確定歷史遺跡而獲得航空攝影和成象文件的標準指南用途和地面條件 |
Standard Guide for Acquisition of File Aerial Photography and Imagery for Establishing Historic Site-Use and Surficial Conditions |
| ASTM D 5519-1994 |
天然和人工粗石材料粒度分析標準試驗方法 |
Standard Test Method for Particle Size Analysis of Natural and Man-Made Riprap Materials |
| ASTM D 5520-1994 |
單軸壓縮法實驗室測定凍結土壤樣品蠕變性能的標準試驗方法 |
Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression |
| ASTM D 5521-1994 |
顆粒蓄水層中地下水監控井開發的標準指南 |
Standard Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers |
| ASTM D 5522-1999 |
土壤、巖石和封閉流體化學分析實驗室最低要求標準規范 |
Standard Specification for Minimum Requirements for Laboratories Engaged in Chemical Analysis of Soil, Rock, and Contained Fluid |
| ASTM D 5523-1994 |
單體芳香異氰酸酯中水解氯銀量滴定法測定聚氨酯原料酸度的標準試驗方法 |
Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates |
| ASTM D 5524-1994 |
用液體色譜法測定高密度聚乙烯中酚抗氧化劑的標準試驗方法 |
Standard Test Method for Determination of Phenolic Antioxidants in High Density Polyethylene Using Liquid Chromatography |
| ASTM D 5525-1994 |
塑料在模擬有效著陸環境中暴露的標準規范 |
Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment |
| ASTM D 5526-1994 |
加速土地填筑條件下塑料材料的厭氧生物降解測定的標準試驗方法 |
Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions |
| ASTM D 5527-1994 |
用聲學方法測量表面風和溫度的標準規范 |
Standard Practices for Measuring Surface Wind and Temperature by Acoustic Means |
| ASTM D 5528-2001 |
單向纖維增強聚合母體復合材料I型層間斷裂韌性的標準試驗方法 |
Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites |
| ASTM D 5530-1994 |
用Karl Fischer滴定法測定有害廢油總水份的標準試驗方法 |
Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry |
| ASTM D 5531-1994 |
涂層顏色和幾何外觀實物產品標準的制作、維護和分發的標準導則 |
Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings |
| ASTM D 5532-1994 |
油漆用云母狀鐵氧顏料的標準規范 |
Standard Specification for Micaceous Iron Oxide Pigments for Paint |
| ASTM D 5533-1998 |
評價IIIE排列下火花點燃式發動機中汽車發動機油的標準試驗方法 |
Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIE, Spark-Ignition Engine |
| ASTM D 5534-1994 |
液壓液體汽相防銹性能的標準試驗方法 |
Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids |
| ASTM D 5535-1998 |
用于路面接合和裂紋的成形密封劑相關標準術語 |
Standard Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements |
| ASTM D 5536-1994 |
無節疤木材性能測定用林材樹取樣的標準規范 |
Standard Practice for Sampling Forest Trees for rmination of Clear Wood Properties |
| ASTM D 5537-1998 |
電纜或光纜的絕緣材料在立式電纜槽結構中燃燒時熱釋放,火焰擴散和質量損失試驗的標準試驗方法 |
Standard Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ASTM D 5538-1998 |
熱塑性彈性體術語和縮寫的標準規范 |
Standard Practice for Thermoplastic Elastomers-Terminology and Abbreviations |
| ASTM D 5539-1994 |
種子初始混合標準規范 |
Standard Specification for Seed Starter Mix |
| ASTM D 5540-1994 |
用于在線水取樣和分析的流量和溫度控制標準規范 |
Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis |
| ASTM D 5541-1994 |
明渠流量階段排水關系確定的標準規范 |
Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow |
| ASTM D 5542-1994 |
離子色譜法分析高純度水中痕量陰離子的標準試驗方法 |
Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography |
| ASTM D 5543-1994 |
水中低水平溶解氧的標準試驗方法 |
Standard Test Methods for Low-Level Dissolved Oxygen in Water |
| ASTM D 5544-1994 |
高純度水蒸發后殘留物在線測量的標準試驗方法 |
Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water |
| ASTM D 5545-1994 |
陽離子慢固乳化地瀝青識別的標準試驗方法 |
Standard Test Method for Identification of Cationic Slow-Set Emulsified Asphalts |
| ASTM D 5546-2001 |
離心法測定甲苯中瀝青膠粘劑溶解度的標準試驗方法 |
Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge |
| ASTM D 5547-1995 |
原子吸收法測定粉未洗滌劑中的粘土和沸石的標準試驗方法 |
Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption |
| ASTM D 5548-1999 |
洗滌中染色織物顏色轉移或顏色損失評定的標準導則 |
Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering |
| ASTM D 5549-1994 |
土工統計現場研究?jī)?nèi)容的標準導則 |
Standard Guide for Content of Geostatistical Site Investigations |
| ASTM D 555-1984 |
干性油試驗 |
Testing Drying Oils |
| ASTM D 5550-1994 |
用氣體比重瓶法測定土壤固體粒子比重的標準試驗方法 |
Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer |
| ASTM D 5551-1995 |
油始凝點測定的標準試驗方法 |
Standard Test Method for Determination of the Cloud Point of Oil |
| ASTM D 5552-1994 |
有色皮革耐印流性能的標準試驗方法 |
Standard Test Method for Resistance of Colored Leather to Bleeding |
| ASTM D 5553-1995 |
硫酸化油中不皂化非揮發性物質測定的標準試驗方法 |
Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils |
| ASTM D 5554-1995 |
脂肪和油中碘值測定的標準試驗方法 |
Standard Test Method for Determination of the Iodine Value of Fats and Oils |
| ASTM D 5555-1995 |
脂肪水溶液和加脂化合物中使用的動物、海生動物及植物性脂肪和油所含游離脂肪酸測定的標準試驗方法 |
Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds |
| ASTM D 5556-1995 |
脂肪水溶液和加脂化合物中使用的脂肪和油中所含水份及其它揮發性物質測定的標準試驗方法 |
Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds |
| ASTM D 5557-1995 |
脂肪水溶液和加脂化合物中使用的脂肪和油所含不溶性雜質測定的標準試驗方法 |
Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds |
| ASTM D 5558-1995 |
測定脂肪和油堿化值的標準試驗方法 |
Standard Test Method for Determination of the Saponification Value of Fats and Oils |
| ASTM D 5559-1995 |
磺酸化或硫酸化油中不存在銨或三乙醇胺皂時酸度作為游離脂肪酸/酸值測定的標準試驗方法 |
Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils |
| ASTM D 5560-1995 |
脂肪和油中所含中性脂肪物質測定的標準試驗方法 |
Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils |
| ASTM D 5562-1995 |
存在銨或三乙醇胺皂時酸度作為游離脂肪酸值測定的標準試驗方法 |
Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps |
| ASTM D 5564-1995 |
硫酸化或磺酸化油中總氨含量測定的標準試驗方法 |
Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils |
| ASTM D 5565-1995 |
測定動物、海洋動物和植物脂肪和油中脂肪酸凝固點的標準試驗方法 |
Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils |
| ASTM D 5566-1995 |
硫酸化油和磺酸化油的無機鹽含量測定的標準試驗方法 |
Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils |
| ASTM D 5567-1994 |
土壤土工合成織物系統液力傳導比(CHR)標準試驗方法 |
Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 5568-1995 |
微波頻率下固體材料相對復介電常數和磁導率測量標準試驗方法 |
Standard Test Method for Measuring Relative Complex Permittivity and Magnetic Permeability of Solid Materials at Microwave Frequencies |
| ASTM D 5569-1994 |
護套加熱件用電級氧化鎂靜流測定用標準試驗方法 |
剚Standard Test Method for the Determination of Static Flow of Electrical Grade Magnesium Oxide for Use in Sheathed Heating Elements |
| ASTM D 5570-1994 |
用作外殼密封的膠帶和膠粘劑耐水性標準試驗方法 |
Standard Test Method for Water Resistance of Tape and Adhesives Used as a Box Closure |
| ASTM D 5571-1994 |
額定容量不超過60加侖(227公升)的塑料密封頭圓筒的耐環境應力裂開(ESCR)的標準試驗方法 |
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity |
| ASTM D 5572-1995 |
非結構木材制品中指形接合用膠粘劑的標準規范 |
Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products |
| ASTM D 5573-1999 |
纖維增強塑料(FRP)接合中失效方式分類的標準操作規程 |
Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints |
| ASTM D 5574-1994 |
確定結構連接設計用木材膠粘劑允許機械性能的標準試驗方法 |
Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints |
| ASTM D 5575-1999 |
亞乙烯氟化物與其它氟化物單體的共聚物標準規范 |
Standard Specification for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers |
| ASTM D 5576-2000 |
用付里葉變換紅外光譜(FT-IR)法測定聚烯烴和聚烯烴共聚物結構實體的標準實施規程 |
Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR) |
| ASTM D 5577-1994 |
再生塑料中污染物分離及鑒別技術的標準導則 |
Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics |
| ASTM D 5578-1994 |
工作場所空氣中環氧乙烯測定的標準試驗方法 |
Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com