標準號 |
中文名稱 |
英文名稱 |
| ASTM D 4749-1987 |
煤和特定煤粒度進行篩選分析的試驗方法 |
Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size |
| ASTM D 475-1967 |
純凈對位紅色基顏料規格 |
Pure Para Red Toner Pigment |
| ASTM D 4750-1987 |
測定鉆井或監測井(觀察井)中地下水位的試驗方法 |
Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) |
| ASTM D 4751-1999 |
測定土工織物表觀露縫尺寸的試驗方法 |
Test Method for Determining Apparent Opening Size of a Geotextile |
| ASTM D 4752-1998 |
用溶劑擦試法測定硅酸乙酯(無機)富鋅底漆耐甲乙酮的試驗方法 |
Test Method for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub |
| ASTM D 4753-1995 |
檢驗土壤、巖石及有關結構用的天平和天平盤的評定、選擇和規定 |
Evaluating, Selecting and Specifying Balances and Scales for Use in Testing Soil, Rock and Related Construction Materials |
| ASTM D 4754-1998 |
使用液膜蒸餾器(FDA)移動件進行塑料制品的雙側液體提取的試驗方法 |
Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell |
| ASTM D 4755-1995 |
鹵化有機溶劑及其摻和物中游離鹵素的測試方法 |
Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures |
| ASTM D 4756-1996 |
硬質聚氯乙烯擋板和拱腹的安裝 |
Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit |
| ASTM D 4757-1998 |
標卡限定的蒸氣脫脂劑 |
Placarding Solvent Vapor Degreasers |
| ASTM D 4759-1988 |
測定鋪地合成物的特性適合性 |
Determining the Specification Conformance of Geosynthetics |
| ASTM D 476-2000 |
二氧化鈦干顏料色素的標準分類 |
Standard Classification for Dry Pigmentary Titanium Dioxide Products |
| ASTM D 4761-1996 |
材料及木基結構材料機械性能的試驗方法 |
Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material |
| ASTM D 4762-1988 |
自動工業復合材料的檢驗 |
Testing Automotive/ Industrial Composite Materials |
| ASTM D 4763-1988 |
用熒光光譜測定法對水中化學品的鑒別 |
Identification of Chemicals in Water by Fluorescence Spectroscopy |
| ASTM D 4764-2001 |
X射線熒光光譜法測定涂料中二氧化鈦含量的標準試驗方法 |
Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint |
| ASTM D 4765-1998 |
在工作場所大氣中氟化物的試驗方法 |
Test Method for Fluorides in Workplace Atmospheres |
| ASTM D 4766-1998 |
在工場所大氣中氯乙烯的試驗方法(碳管法) |
Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method) |
| ASTM D 4767-1995 |
對粘土進行壓實和不排水三軸壓縮試驗法 |
Test Method for Consolidated-Undrained Triaxial Compression Test on Cohesive Soils |
| ASTM D 4768-1996 |
用氣相色譜法在絕緣流體中2,6-二叔丁基對-甲酚和2,6-二叔丁基對-苯酚的試驗方法 |
Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Fluids by Gas Chromatography |
| ASTM D 4769-1988 |
紡織品和較舒適經紗針織品 |
Woven and Warp Knitted Comforter Fabrics |
| ASTM D 4770-2000 |
評定用于充填外衣的人造纖維棉絮的標準試驗方法 |
Standard Test Method for Appearance and Integrity of Highloft Battting After Refurbishing |
| ASTM D 4771-1995 |
室內家具裝飾用針織品 |
Knitted Upholstery Fabrics for Indoor Furniture |
| ASTM D 4772-1997 |
絲絨紡織品表面吸水性的標準試驗方法(水流試驗法) |
Standard Test Method for Surface Water Absorption of Terry Fabrics (Water Flow) |
| ASTM D 4773-1993 |
丙二醇－甲基醚、雙丙二醇－甲基醚和丙二醇－甲基醚乙酸酯純度的試驗方法 |
Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether and Propylene Glycol Monomethyl Ether Acetate |
| ASTM D 4774-1994 |
使用者自行粘貼的麻醉藥物標簽 |
User Applied Drug Labels in Anesthesiology |
| ASTM D 4775-1994 |
藥物(不包括大批量的藥房用藥)用填裝注射器和交貨系統的識別和外形 |
Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages) |
| ASTM D 4776-1998 |
用H-試驗法對輪胎簾布及其他增強簾布與硫化橡膠粘著性的試驗方法 |
Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure |
| ASTM D 4778-1994 |
在熱轉換條件下測定冷卻水的腐蝕和污染傾向的試驗方法 |
Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions |
| ASTM D 4779-1993 |
用紫外線法或過硫酸鹽氧化法或兩者同時用,以及紅外線法對高純度水中總碳、有機碳和無機碳的試驗方法 |
Test Method for Total, Organic and Inorganic Carbon in High Purity Water by Ultraviolet (UV) or Persulfate Oxidation or Both and Infrared Detection |
| ASTM D 478-1986 |
鋅黃(鉻酸鋅)顏料 |
Zinc Yellow (Zinc Chromate) Pigments |
| ASTM D 4780-1995 |
用多點氪吸附法測定催化劑的低表面面積的試驗方法 |
Test Method for Determination of Low Surface Area of Catalysts by Multipoint Krypton Adsorption |
| ASTM D 4781-1999 |
精制催化劑粒子和催化劑載體粒子的機械抽頭襯料密度的標準試驗方法 |
Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles |
| ASTM D 4782-1991 |
用濕化學法在分子篩催化劑中鈀的試驗方法 |
Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry |
| ASTM D 4783-2001 |
在容器內被細菌、酵母菌和霉菌侵染的膠粘劑制備物耐受性的標準試驗方法 |
Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi |
| ASTM D 4784-1993 |
液化天然氣(LNG)密度的計算方法 |
LNG Density Calculation Models |
| ASTM D 4785-2000 |
水中低含量碘-131的標準試驗方法 |
Standard Test Method for Low-Level Iodine-131 in Water |
| ASTM D 4786-1994 |
單孔的縫合抗斯裂強度的試驗方法 |
Test Method for Stitch Tear Strength Single Hole |
| ASTM D 4787-1993 |
對混凝土底層使用的液體或薄板襯墊的連續驗正 |
Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates |
| ASTM D 4788-1988 |
利用紅外線溫度記錄法探測橋面分層的試驗方法 |
Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography |
| ASTM D 4789-1994 |
4,4-二酚基丙烷(雙酚A)溶液顏色的試驗方法 |
Test Method for Solution Color of 4,4 -Isopropylidenediphenol (Bisphenol A) |
| ASTM D 4790-1999 |
芳烴及有關化學品的術語 |
Terminology of Aromatic Hydrocarbons and Related Chemicals |
| ASTM D 4791-1999 |
粗集料中扁顆粒和長顆粒的試驗方法 |
Test Method for Flat or Elongated Particles in Coarse Aggregate |
| ASTM D 4792-1999 |
從水化反應中對集料膨脹的試驗方法 |
Test Method for Potential Expansion of Aggregates from Hydration Reactions |
| ASTM D 4793-1993 |
含水廢棄物的連續成批萃取的試驗方法 |
Test Method for Sequential Batch Extraction of Waste with Water |
| ASTM D 4794-1994 |
用氣相色譜法測定纖維素醚產品中羥乙基替代物的試驗方法 |
Test Method for Determination of Ethoxyl Substitution in Cellulose Ether Products by Gas Chromatography |
| ASTM D 4795-1994 |
可溶行硝化纖維素中氮含量的試驗方法.交替法 |
Test Method for Nitrogen Content of Soluble Nitrocellulose - Alternative Method |
| ASTM D 4796-1988 |
熱塑性交通標志材料粘合強度的試驗方法 |
Test Method for Bond Strength of Thermoplastic Traffic Marking Materials |
| ASTM D 4797-1988 |
白色和黃色熱塑性交通標志包括鉻酸鉛和二氧化酞的化學和重量分析的試驗方法 |
Test Methods for Chemical and Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking Containing Lead Chromate and Titanium Dioxide |
| ASTM D 4798-2000 |
瀝青材料加速老化的標準試驗方法(氙弧法) |
Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) |
| ASTM D 4799-2000 |
瀝青材料加速老化的標準試驗方法(螢光UV和冷凝法) |
Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV and Condensation Method) |
| ASTM D 480-1988 |
鋁粉和鋁粉漿的抽樣和試驗方法 |
Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes |
| ASTM D 4800-1994 |
膠粘劑的分級和分類 |
Classifying and Specifying Adhesives |
| ASTM D 4801-1995 |
0.25mm(0.010英寸)和大于此厚度的聚乙烯薄膜 |
Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater |
| ASTM D 4802-1994 |
聚甲基丙烯酸甲酯丙烯酸塑料片 |
Poly(Methyl Methacrylate) Acrylic Plastic Sheet |
| ASTM D 4803-1997 |
聚氯乙烯(PVC)建筑產品的預測熱裝配的試驗方法 |
Test Method for Predicting Heat Buildup in PVC Building Products |
| ASTM D 4804-1998 |
測定非硬質固體塑料易燃性的標準試驗方法 |
Standard Test Methods for Determining the Flammability Characteristics of Nonrigid Solid Plastics |
| ASTM D 4805-1988 |
塑料標準用名詞術語 |
Terminology for Plastics Standards |
| ASTM D 4806-2001 |
用于汽車火花點火發動機燃料的混有汽油的變性燃料酒精標準規范 |
Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 4806a-2001 |
用于汽車點火發動機燃料的與汽油混合的變性燃料酒精的標準規范 |
Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel |
| ASTM D 4807-1988 |
原油中膜過濾沉淀物的試驗方法 |
Test Method for Sediment in Crude Oil by Membrane Filtration |
| ASTM D 4808-1998 |
利用低分辨率核磁共振譜法測試輕餾份、中間餾份、氣體油和渣油中氫含量的試驗方法 |
Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy |
| ASTM D 4809-1995 |
用彈式量熱器對液態,烴類燃料燃燒熱量的試驗方法(中等精確度方法) |
Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Intermediate Precision Method) |
| ASTM D 4810-1988 |
使用著色長度檢測管對天然氣中硫化氫的試驗方法 |
Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes |
| ASTM D 4811-1997 |
被用作屋面防雨板的非硫化橡膠薄板材 |
Nonvulcanized Rubber Sheet Used as Roof Flashing |
| ASTM D 4812-1999 |
塑料的無凹口懸臂梁抗沖擊強度的試驗方法 |
Test Method for Unnotched Cantilever Beam Impact Strength of Plastics |
| ASTM D 4814-2001 |
機動車火花點燃式發動機燃料的標準規范 |
Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4814a-2001 |
汽車點火發動機燃料的標準規范 |
Standard Specification for Automotive Spark-Ignition Engine Fuel |
| ASTM D 4815-1999 |
氣相色譜分析法測定汽油中甲基叔丁基醚、二乙基丁基醚、甲苯磺酰－精氨酸甲酯、二異丙酯(MTBE,ETBE,TAME,DIPE)叔戌酯和C1-C4醇的試驗方法 |
Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography |
| ASTM D 4816-1994 |
用熱分析法對飛機渦輪機燃料比熱的試驗方法 |
Test Method for Specific Heat of Aircraft Turbine Fuels by Thermal Analysis |
| ASTM D 4817-1988 |
橡膠化合材料的分類.硬質酸 |
Classification for Rubber Compounding Materials - Stearic Acid |
| ASTM D 4818-1989 |
橡膠化合材料的分類.硫化加速劑 |
Classification for Rubber Compounding Materials - Vulcanization Accelerators |
| ASTM D 4819-1996 |
聚烯烴塑料制軟多孔材料 |
Flexible Cellular Materials Made from Polyolefin Plastics |
| ASTM D 482-1995 |
石油產品灰分的測試方法 |
Test Method for Ash from Petroleum Products |
| ASTM D 482-2000 |
石油產品灰分的標準測試方法 |
Standard Test Method for Ash from Petroleum Products |
| ASTM D 4820-1996 |
炭黑的試驗方法.用多點B,E,T,氮吸附法測定表面積 |
Test Methods for Carbon Black - Surface Area by Multipoint B.E.T. Nitrogen Adsorption |
| ASTM D 4821-2001 |
炭黑的標準指南.試驗方法精度和偏差的確認 |
Standard Guide for Carbon Black-Validation of Test Method Precision and Bias |
| ASTM D 4821a-2001 |
炭黑的標準指南.測試方法的精密度和偏差的驗證 |
Standard Guide for Carbon Black-Validation of Test Method Precision and Bias |
| ASTM D 4822-1988 |
河水中沉淀物粒度分析方法的選擇 |
Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods) |
| ASTM D 4823-1995 |
浸沒的非固結的沉淀物芯樣的提取 |
Core Sampling Submerged, Unconsolidated Sediments |
| ASTM D 4824-1994 |
用氨化學吸附法測定催化劑酸度的試驗方法 |
Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption |
| ASTM D 4825-1997 |
按尺寸裁切的辦公紙卷曲度測量的試驗方法 |
Test Method for Measurement of Curl in Cut-Sized Office Paper |
| ASTM D 4826-1988 |
紙漿、紙張和紙板用測量單位和換算系數 |
Units of Measurement and Conversion Factors for Pulp, Paper and Paperboard |
| ASTM D 4827-1993 |
利用毛細管叢的氣相色譜法對乳膠中未反應單體的試驗方法 |
Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography |
| ASTM D 4828-1994 |
有機覆層實際可洗性的試驗方法 |
Test Method for Practical Washability of Organic Coatings |
| ASTM D 4829-1995 |
土壤的膨脹系數的試驗方法 |
Test Method for Expansion Index of Soils |
| ASTM D 483-1997 |
石油制植物噴灑油中未磺化殘渣測定的試驗方法 |
Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils |
| ASTM D 4830-1998 |
屋面和防水用熱塑性織物特性的試驗方法 |
Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing |
| ASTM D 4831-1988 |
皮革扣環的抗扯裂強度的試驗方法 |
Test Method for Buckle Tear Strength of Leather |
| ASTM D 4832-1995 |
土與水泥的混和泥漿測試筒制備的檢測方法 |
Test Method for Preparation and Testing of Soil-Cement Slurry Test Cylinders |
| ASTM D 4833-2000 |
土工織物、地膜及其有關制品的抗擊穿系數的標準試驗方法 |
Standard Test Method for Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products |
| ASTM D 4834-1988 |
用直接吸氣的原子吸收光譜法測定涂料中鉛的試驗方法 |
Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy |
| ASTM D 4835-1993 |
丙二醇－甲基醚乙酸酯 |
Propylene Glycol Monomethyl Ether Acetate |
| ASTM D 4836-1995 |
雙丙二醇-甲基醚 |
Dipropylene Glycol Monomethyl Ether |
| ASTM D 4837-1997 |
丙二醇－甲基醚 |
Propylene Glycol Monomethyl Ether |
| ASTM D 4838-1988 |
測定色漆相對著色力的試驗方法 |
Test Method for Determining the Relative Tinting Strength of Chromatic Paints |
| ASTM D 4839-1994 |
用紫外線法或過硫酸鹽氧化法或兩者同時使用,以及紅外線法檢測水中總碳和有機碳的試驗方法 |
Test Method for Total Carbon and Organic Carbon in Water by Ultra-Violet or Persulfate Oxidation or Both and Infrared Detection |
| ASTM D 4840-1999 |
保管程序的抽樣系列 |
Sampling Chain of Custody Procedures |
| ASTM D 4841-1988 |
含有有機和無機組成物的水樣品保留時間的估算 |
Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents |
| ASTM D 4842-1990 |
測定固體廢棄物抗凍結和解凍性的試驗方法 |
Test Method for Determining the Resistance of Soild Wastes to Freezing and Thawing |
| ASTM D 4843-1988 |
固體廢棄物的浸濕和烘干的試驗方法 |
Test Method for Wetting and Drying Test of Solid Wastes |
| ASTM D 4844-1988 |
工人保護用廢棄物管理器材的空中檢測 |
Air Monitoring at Waste Management Facilities for Worker Protection |
| ASTM D 4845-1996 |
有關羊毛的名詞術語 |
Terminology Relating to Wool |
| ASTM D 4846-1996 |
按扣抗不易扣緊性的標準試驗方法 |
Standard Test Method for Resistance to Unsnapping of Snap Fasteners |
| ASTM D 4847-1995 |
機織遮陽篷和遮雨檐織物 |
Woven Awning and Canopy Fabrics |
| ASTM D 4848-1998 |
紡織品的強度、變形性及其有關特性的名詞術語 |
Terminology of Force, Deformation and Related Properties of Textiles |
| ASTM D 4850-2000 |
有關織物的標準術語 |
Standard Terminology Relating to Fabric |
| ASTM D 4851-1997 |
建筑用涂層織物和層壓織物的標準試驗方法 |
Standard Test Methods for Coated and Laminated Fabrics for Architectural Use |
| ASTM D 4852-1988 |
懸掛的裝飾織物的評定 |
Evaluation of Attached Upholstery Fabrics |
| ASTM D 4853-1997 |
減低試驗變異性 |
Reducing Test Variability |
| ASTM D 4854-1995 |
從取樣方案的期望原始資料中對變異性幅度的估算 |
Estimating the Magnitude of Variability from Expected Sources in Sampling Plans |
| ASTM D 4855-1997 |
比較試驗方法的標準實施規程 |
Standard Practice for Comparing Test Methods |
| ASTM D 4856-1999 |
在工作場所大氣中硫酸酸霧測定的試驗方法(離子色譜法) |
Test Method for Determination of Sulfuric Acid Mist in the Workplace Atmosphere (Ion Chromatographic) |
| ASTM D 4857-2001 |
測定潤滑油最大限度減輕二沖程循環汽油發動機(船用外側馬達除外)中活塞環卡住和活塞積垢的能力的標準試驗方法 |
Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards |
| ASTM D 4857a-2001 |
測定潤滑油最大限度減輕二沖程循環汽油發動機(船用外側馬達除外)中的環粘附和活塞積垢的標準試驗方法 |
Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards |
| ASTM D 4858-1995 |
測定潤滑油對改進二沖程循環汽油發動機預燃傾向的試驗方法 |
Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines |
| ASTM D 4859-1997 |
二沖程循環汽油發動機用潤滑油 |
Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC |
| ASTM D 4860-1991 |
柴油燃料中游離水和粒子雜質的試驗方法 |
Test Method for Free Water and Particulate Contamination in Mid-Distillate Fuels (Clear and Bright Numerical Rating) |
| ASTM D 4861-2000 |
空氣中農藥和多氯聯苯抽樣和選擇分析技術的標準實施規程 |
Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air |
| ASTM D 4863-1995 |
測定二沖程循環汽油發動機潤滑劑潤滑性的試驗方法 |
Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants E2 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com