標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM E 1002-1996 |
使用超聲波檢漏的試驗方法 |
Test Method for Leaks Using Ultrasonics |
| ANSI/ASTM E 1003-1996 |
靜水壓泄漏試驗的試驗方法 |
Test Method for Hydrostatic Leak Testing |
| ANSI/ASTM E 1007-1997 |
通過天棚地板組件及其支承結構傳導的夯擊機械撞擊聲的現場測量試驗方法 |
Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures |
| ANSI/ASTM E 1017-1988 |
外殘留窗組件通用性能要求規范 |
Specification for Generic Performance Requirements for Exterior Residential Window Assemblies (04.11) |
| ANSI/ASTM E 1025-1996 |
輻射攝影術用孔型圖像質量指示器的設計、制造和材料組分類實施規程 |
Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (Iqi) Used for Radiology |
| ANSI/ASTM E 1029-2001 |
臨床實驗室計算機系統文件編制指南 |
Guide for Documentation of Clinical Laboratory Computer Systems |
| ANSI/ASTM E 1030-1996 |
金屬鑄件的射線照相檢驗的試驗方法 |
(Test Method for Radiographic Examination of Metallic Castings) |
| ANSI/ASTM E 1032-2001 |
焊縫放射檢驗的方法 |
Method for Radiographic Examination of Weldments |
| ANSI/ASTM E 1042-1997 |
鏝刀抹涂或噴涂用的吸音材料的分類 |
Classification for Acoustically Absorptive Materials Applied by Trowel or Spray |
| ANSI/ASTM E 105-1997 |
材料概率取樣的實施規程 |
Practice for Probability Sampling of Materials |
| ANSI/ASTM E 1050-1997 |
管子、雙擴音器和數字頻率分析系統用傳聲材料的阻抗和吸收的試驗方法 |
Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System |
| ANSI/ASTM E 1057-1993 |
建筑和建筑系統投資可調節內部回報比率和內部回報比率的測量實施規程 |
Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems (04.11) |
| ANSI/ASTM E 1066-1996 |
氨比色泄漏檢驗的試驗方法 |
Test Method for Ammonia Colorimetric Leak Testing |
| ANSI/ASTM E 1067-2001 |
纖維玻璃增強塑料樹脂灌/容器聲音散發檢驗操作規程 |
Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (Frp) Tanks/Vessels |
| ANSI/ASTM E 1074-1993 |
建筑物和建筑系統投資收益的測算實施規程 |
Practice for Measuring Net Benefits for Investments in Buildings and Building Systems (04.11) |
| ANSI/ASTM E 1079-1996 |
透射密度計的校準實施規程 |
Practice for Calibration of Transmission Densitometers |
| ANSI/ASTM E 1091-1996 |
防護板用非金屬蜂窩芯子規范 |
Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels (04.11) |
| ANSI/ASTM E 11-2001 |
試驗用途的線織篩規范 |
Specification for Wire-Cloth Sieves for Testing Purposes |
| ANSI/ASTM E 1105-1996 |
通過均一或循環靜態空氣壓差測定門、窗簾墻和安裝的外窗水滲透現場測量的試驗方法 |
Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Curtain Walls, and Doors by Uniform or Cyclic Static Air Pressure Difference (04.11) |
| ANSI/ASTM E 1111-1997 |
測量頂棚系統地段間減弱的試驗方法 |
Test Method for Measuring the Interzone Attenuation of Ceiling Systems |
| ANSI/ASTM E 1114-1996 |
測定銥192工業射線源焦點尺寸的試驗方法 |
Test Method for Determining the Focal Size of Iridium-192 Industrial Radiographic Sources |
| ANSI/ASTM E 1118-1996 |
強化熱固樹脂管(RTRP)的聲輻射檢驗的實施規程 |
Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (Rtrp) |
| ANSI/ASTM E 1121-1993 |
建筑物和建筑系統投資回收率的測算實施規程 |
Practice for Measuring Payback for Investments in Buildings and Building Systems (04.11) |
| ANSI/ASTM E 1124-1997 |
用雙表面法現場測量聲功率級的試驗方法 |
Test Method for Field Measurement of Sound Power Level by the Two-Surface Method |
| ANSI/ASTM E 1130-2002 |
使用聲音清晰度指數在敞開式辦公室內對談話保密性進行客觀量度的試驗方法 |
Test Method for Objective Measurement of Speech Privacy in Open Offices Using Articulation Index |
| ANSI/ASTM E 1135-1996 |
熒光穿透性亮度比較的試驗方法 |
Test Method for Comparing The Brightness of Fluorescent Penetrants |
| ANSI/ASTM E 1139-1997 |
金屬壓力面產生的聲輻射的連續監測實施規范 |
Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries |
| ANSI/ASTM E 114-1996 |
用接觸法做超聲脈沖回波縱波檢驗的實施規程 |
Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method |
| ANSI/ASTM E 1155-1996 |
用F-值系統測定地板平坦度和水平度的試驗方法 |
Test Method for Determining Floor Flatness and Levelness Using the F-Number System (04.11) |
| ANSI/ASTM E 1161-1996 |
半導體和電子件的放射性檢查的試驗方法 |
Test Method for Radiologic Examination of Semiconductors and Electronic Components |
| ANSI/ASTM E 1165-1996 |
用針孔成像法測量工業X射線管焦點的試驗方法 |
Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging |
| ANSI/ASTM E 1169-1997 |
耐久性試驗的實施指南 |
Guide for Conducting Ruggedness Tests |
| ANSI/ASTM E 1171-2002 |
在循環溫度和濕度環境下光伏模塊的試驗方法 |
Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments |
| ANSI/ASTM E 1179-1997 |
敞開式辦公室件和系統測試用聲源規范 |
Specification for Sound Sources Used for Testing Open Office Components and Systems |
| ANSI/ASTM E 1186-1987 |
建筑物外層漏氣的現場檢測實施規程 |
Practice for Air Leakage Site Detection in Building Envelopes (04.11) |
| ANSI/ASTM E 1187-1997 |
與實驗室認可有關的術語 |
Terminology Relating to Laboratory Accreditation |
| ANSI/ASTM E 1204-2001 |
食品加工用γ輻射裝置的劑量測定的實施規程 |
Dosimetry in Gamma Irradiation Facilities for Food Processing, Practice for (12.02) |
| ANSI/ASTM E 1205-2001 |
高鈰-三價鈰硫酸劑量測定系統的使用的實施規程 |
Use of a Ceric-Cerous Sulfate Dosimetry System, Practice for (12.02) |
| ANSI/ASTM E 1211-1997 |
使用表面安裝的聲輻射探測器作泄漏探測和定位的實施規范 |
Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors |
| ANSI/ASTM E 122-2000 |
為估算一批產品或者一次加工過程的質量而選擇樣品尺寸的實施規程 |
Practice for Choice of Sample Size to Estimate a Measure of Quality for a Lot or Process |
| ANSI/ASTM E 1222-1997 |
管子護套裝置介入損耗的實驗室測量的試驗方法 |
Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ANSI/ASTM E 1224-1996 |
實驗室認可能力類別分區指南 |
Guide for Categorizing Fields of Capability for Laboratory Accreditation Purposes |
| ANSI/ASTM E 125-1997 |
鐵鑄件的磁粉檢驗用參考射線照片 |
Reference Photographs for Magnetic Particle Indications on Ferrous Castings |
| ANSI/ASTM E 1254-1996 |
X射線照片和未曝光工業X射線照相膠片的儲存指南 |
Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films |
| ANSI/ASTM E 1255-1996 |
射線檢查實施規程 |
Practice for Radioscopy |
| ANSI/ASTM E 1258-1988 |
風扇增壓裝置氣流校正的試驗方法 |
Test Method for Airflow Calibration of Fan Pressurization Devices (04.11) |
| ANSI/ASTM E 1265-1997 |
氣動排氣消音器介入損耗測量的試驗方法 |
Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers |
| ANSI/ASTM E 127-1999 |
超聲波標準鋁合金塊的制造及檢驗的實施規范 |
Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks |
| ANSI/ASTM E 1275-2001 |
放射鉻箔劑量測定系統使用的實施規程 |
The Use of a Radiochromic Film Dosimetry System, Practice for (12.02) |
| ANSI/ASTM E 1276-1997 |
有機玻璃劑量測定系統使用的實施規程 |
Use of Polymethylmethacrylate Dosimetry System, Practice for |
| ANSI/ASTM E 1289-1997 |
聲傳輸損耗的基準試樣規范 |
Specification for Reference Specimen for Sound Transmission Loss |
| ANSI/ASTM E 1301-1996 |
實驗室驗證試驗程序的制定和運行指南 |
Guide for Development and Operation of Laboratory Proficiency Testing Programs |
| ANSI/ASTM E 1310-2001 |
輻射鉻光學波導管劑量測定系統的使用的實施規程 |
The Use of a Radiochromic Optical Waveguide Dosimetry System, Practice for (12.02) |
| ANSI/ASTM E 1316-2002 |
無損檢驗術語 |
Terminology for Nondestructive Examinations |
| ANSI/ASTM E 1320-1996 |
鈦鑄件用基準X射線照相 |
Reference Radiographs for Titanium Castings |
| ANSI/ASTM E 1323-1996 |
實驗室測量規程的評估和結果數據的統計分析指南 |
Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
| ANSI/ASTM E 1324-1996 |
超聲檢驗裝置的某些電子特性測定指南 |
Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments |
| ANSI/ASTM E 1352-2002 |
模擬裝璜家具組裝件的抗香煙引燃性的試驗方法 |
Test Methods For Cigarette Ignition Resistance Of Mock-Up Upholstered Furniture Assemblies |
| ANSI/ASTM E 1353-2002 |
裝璜家具部件的抗香煙引燃性的試驗方法 |
Test Methods For Cigarette Ignition Resistance Of Components Of Upholstered Furniture |
| ANSI/ASTM E 1354-2002 |
使用耗氧量熱計測試材料和產品的熱和可見煙釋放速率的方法 |
Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ANSI/ASTM E 1370-2001 |
工作人員和工作場所保護的空氣取樣戰略指南 |
Guide for Air Sampling Strategies for Worker and Workplace Protection |
| ANSI/ASTM E 1374-1997 |
開放式辦公室聲學及其適用的ASTM標準的指南 |
Guide for Open Office Acoustics and Applicable ASTM Standards |
| ANSI/ASTM E 1381-1996 |
臨床實驗室儀器與計算機之間傳遞信息的低層協議規范 |
Specification for Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems |
| ANSI/ASTM E 1390-1996 |
用于觀察工業射線照相的照明裝置的指南 |
Guide for Illuminators Used for Viewing Industrial Radiographs |
| ANSI/ASTM E 140-2002 |
金屬硬度換算表 |
Hardness Conversion Tables for Metals |
| ANSI/ASTM E 1400-1995 |
高劑量輻射量測定校準實驗室的特性記述和性能規程 |
Characterization and Performance of a High-Dose Radiation Dosimetry Calibration Laboratory, Practice for (12.02) |
| ANSI/ASTM E 141-1997 |
根據概率取樣結果所得數據的驗收實施規程 |
Practice for Acceptance of Evidence Based on the Results of Probability Sampling |
| ANSI/ASTM E 1411-2001 |
射線檢驗系統質量操作規程 |
Practice for Qualification of Radioscopic Systems |
| ANSI/ASTM E 1416-1996 |
焊件的射線檢驗的試驗方法 |
Test Method for Radioscopic Examination of Weldments |
| ANSI/ASTM E 1419-2002 |
用聲波發射檢驗充有氣體的無縫壓力容器的試驗方法 |
Test Method for Examination of Seamless, Gas Filled, Pressure Vessels Using Acoustic Emission |
| ANSI/ASTM E 142-1996 |
射線照相檢驗的質量控制方法 |
Method for Controlling Quality of Radiographic Testing |
| ANSI/ASTM E 1433-1997 |
環境聲學標準的選擇的指南 |
Guide for Selection of Standards on Environmental Acoustics |
| ANSI/ASTM E 1453-1996 |
包含模擬或數字X射線檢驗數據的介質的存儲指南 |
Guide for Storage of Media that Contains Analog or Digital Radioscopic Data |
| ANSI/ASTM E 1474-2001 |
使用小型耗氧量熱計測定裝飾家具和墊子的組合件或組合材料的熱釋放速率的試驗方法 |
Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter |
| ANSI/ASTM E 1475-1997 |
數字放射性測試數據的計算機化傳輸用數據組指南 |
Guide for Data Fields for Computerized Transfer of Digital Radiological Test Data |
| ANSI/ASTM E 1476-1997 |
金屬識別、定級和分類指南 |
Guide for Metals Identification, Grade Verification, and Sorting |
| ANSI/ASTM E 1481-1993 |
建筑物用護欄裝置和圍欄術語 |
Terminology of Railing Systems and Rails for Buildings (04.11) |
| ANSI/ASTM E 1488-1997 |
研制和運用ASTM試驗方法用的統計程序的試驗方法 |
Test Method for Statistical Procedures to Use in Developing and Applying Test Methods |
| ANSI/ASTM E 1495-1997 |
復合材料、疊層板材和粘接件的聲學超聲波評定指南 |
Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints |
| ANSI/ASTM E 1496-1997 |
中子射線照相尺寸測量的試驗方法 |
Test Method for Neutron Radiographic Dimensional Measurements |
| ANSI/ASTM E 1503-1997 |
使用數字統計分析系統測量室外聲音的測試方法 |
Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System |
| ANSI/ASTM E 1537-2002 |
裝覆蓋飾物的實尺家具燃燒試驗的試驗方法 |
Test Method for Fire Testing of Real Scale Upholstered Furniture Items |
| ANSI/ASTM E 1539-2001 |
輻射靈敏指示器的使用指南 |
Guide for the Use of Radiation-Sensitive Indicators |
| ANSI/ASTM E 154-1988 |
用于與地面接觸的混凝土條板下或墻上或作為地板蓋的水蒸氣滯留的的試驗方法 |
Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover (04.11) |
| ANSI/ASTM E 1543-1996 |
熱成像系統的噪聲等效溫差的測試方法 |
Test Method for Noise Equivalent Temperature Difference of Thermal Imaging Systems |
| ANSI/ASTM E 155-1996 |
鋁和鎂鑄件檢驗用標準參考射線照相 |
Reference Radiographs for Examination of Aluminum and Magnesium Castings |
| ANSI/ASTM E 1555-1993 |
用于夾層板修補的結構膏膠粘劑規范 |
Specification for Structural Paste Adhesive for Sandwich Panel Repair (04.11) |
| ANSI/ASTM E 1556-1993 |
合成革、蜂窩狀夾層板修補用環氧樹脂系統規范 |
Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair (04.11) |
| ANSI/ASTM E 1571-1996 |
鐵磁鋼絲繩電磁檢驗實施規程 |
Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope |
| ANSI/ASTM E 1573-1997 |
用A級加權和1/3倍頻帶聲壓級評定開放辦公室掩蔽聲的測試方法 |
Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels |
| ANSI/ASTM E 1579-1996 |
高度計算機化實驗室操作中數據完整性保證的指南 |
Guide for Ensuring Data Integrity in Highly Computerized Laboratory Operations |
| ANSI/ASTM E 1580-1996 |
認可實驗室監督的指南 |
Guide for Surveillance of Accredited Laboratories |
| ANSI/ASTM E 1605-2002 |
減小建筑物和有關結構中鉛基涂料危害的術語 |
Terminology Relating to Abatement of Hazards from Lead-Based Paint in Building and Related Structures (04.11) |
| ANSI/ASTM E 161-1997 |
精密電鑄篩規范 |
Specification for Precision Electroformed Sieves |
| ANSI/ASTM E 1617-1997 |
報告粒徑特性數據的實施規程 |
Practice for Reporting Particle Size Characterization Data |
| ANSI/ASTM E 1620-1997 |
液體微粒及霧化術語 |
Terminology Relating to Liquid Particles and Atomization |
| ANSI/ASTM E 1623-2002 |
使用中型量熱計(ICAL)測定材料、產品和系統的著火和熱參數的試驗方法 |
Test Method For Determination Of Fire And Thermal Parameters Of Materials, Products And Systems Using An Intermediate Scale Calorimeter (ICAL) |
| ANSI/ASTM E 1626-1997 |
ASTM文件中列入政府采購要求的指南 |
Guide for Including Government Procurement Requirements In ASTM Documents |
| ANSI/ASTM E 1629-1996 |
專用渦流探針電阻測定的實施規程 |
Practice for Determining the Impedance of Absolute Eddy Current Probes |
| ANSI/ASTM E 1631-1997 |
電子束劑量計測量和劑量計校準用量熱測定系統的操作規程 |
Use of Calorimetric Dosimetry Systems for Electron Beam Dosimeter Measurements and Dosimeter Calibrations, Practice for |
| ANSI/ASTM E 1633-2002 |
基于計算機的患者病歷用編碼標準規范 |
Specification for Coded Values Used in Computer-Based Patient Record |
| ANSI/ASTM E 1639-2001 |
臨床試驗室信息管理系統基本要求指南 |
Functional Requirements of Clinical Laboratory Information Management Systems, Guide for (14.01) |
| ANSI/ASTM E 164-1997 |
焊接件超聲接觸檢驗的實施規范 |
Practice for Ultrasonic Contact Examination of Weldments |
| ANSI/ASTM E 1648-1996 |
鋁熔焊檢驗的參考射線照相 |
Reference Radiographs for Examination of Aluminum Fusion Welds |
| ANSI/ASTM E 165-2002 |
液體滲透檢驗的試驗方法 |
Test Method for Liquid Penetrant Examination |
| ANSI/ASTM E 1650-2002 |
乙酸纖維素劑量測定系統的使用規程 |
Use of a Cellulose Acetate Dosimetry System, Practice for |
| ANSI/ASTM E 1660-1995 |
辦公室工作用辦公設備適用性的分類 |
Classification for Serviceability of an Office Facility for Support for Office Work (04.11) |
| ANSI/ASTM E 1661-1995 |
辦公設備對于會議和聚會效果的適用性分類 |
Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness (04.11) |
| ANSI/ASTM E 1662-1995 |
辦公設備對于視聽環境的適用性分類 |
Classification for Serviceability of an Office Facility for Sound and Visual Environment (04.11) |
| ANSI/ASTM E 1663-2001 |
辦公設備對于典型辦公室信息技術的適用性分類 |
Classification for Serviceability of an Office Facility for Typical Office Information Technology (04.11) |
| ANSI/ASTM E 1664-1995 |
辦公設備對于設備保護的適用性分類 |
Classification for Serviceability of an Office Facility for Facility Protection (04.11) |
| ANSI/ASTM E 1665-1995 |
辦公設備對于設備保護的適用性分類 |
Classification for Serviceability of an Office Facility for Facility Protection (04.11) |
| ANSI/ASTM E 1666-1995 |
辦公設備對于正常時間和條件以外的工作的適用性分類 |
Classification for the Serviceability of an Office Facility for Work Outside Normal Hours or Conditions (04.11) |
| ANSI/ASTM E 1668-1995 |
辦公設備對于吸引和留住職員的舒適性的適用性分類 |
Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff (04.11) |
| ANSI/ASTM E 1669-1995 |
辦公設備對于尋找位置、通路和道路的適用性的分類 |
Classification for Serviceability of an Office Facility for Location, Access, and Wayfinding (04.11) |
| ANSI/ASTM E 1670-1995 |
辦公設備對于操作和維護管理用建筑物性能的適用性分類 |
Classification for Serviceability of an Office Facility on Performance of Buildings for Management of Operations and Maintenance (04.11) |
| ANSI/ASTM E 1671-1995 |
辦公設備對于清潔度的適用性分類 |
Classification for Serviceability of an Office Facility for Cleanliness (04.11) |
| ANSI/ASTM E 1672-1995 |
計算機斷層系統選擇指南 |
Guide to Computed Tomography (Ct) System Selection |
| ANSI/ASTM E 1686-1997 |
環境噪聲測量及準則選擇的指南 |
Guide for Selection of Environmental Noise Measurements and Criteria |
| ANSI/ASTM E 1692-1995 |
辦公設備對辦公人員變動的適用性分類 |
Classification for Serviceability of an Office Facility for Change and Churn by Occupants (04.11) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com