標準號 |
中文名稱 |
英文名稱 |
| ASTM E 1285-2001 |
λ(拉姆達)噬菌現象或它的脫氧核糖核酸的識別標準指南 |
Standard Guide for Identification of Bacteriophage Lambda ([lambda]) or Its DNA |
| ASTM E 1286-1989 |
熱瘡病毒或它的脫氧核糖核酸的識別 |
Identification of Herpes Simplex Virus or Its DNA |
| ASTM E 1287-1989 |
生物材料的無菌取樣 |
Aseptic Sampling of Biological Materials |
| ASTM E 1288-1989 |
生物量球粒耐久性的試驗方法 |
Test Method for the Durability of Biomass Pellets |
| ASTM E 1289-1997 |
聲傳輸損耗的標樣 |
Reference Specimen for Sound Transmission Loss |
| ASTM E 129-1974 |
用粉末技術做熱離子鎳合金光譜分析的試驗方法 |
Test Method for Spectrographic Analysis of Thermionic Nickel Alloys by the Powder Technique |
| ASTM E 1290-1999 |
測量裂縫尖端開口位移(CTOD)裂縫韌性的試驗方法 |
Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement |
| ASTM E 1291-1999 |
用老鼠進行飽和蒸氣吸入研究的試驗方法 |
Test Method for Conducting a Saturated Vapor Inhalation Study with Rats |
| ASTM E 1292-1994 |
重力對流和強制通風恒溫箱 |
Gravity Convection and Forced Ventilation Incubators |
| ASTM E 1293-1994 |
玻璃測量移液管 |
Glass Measuring Pipets |
| ASTM E 1294-1989 |
用自動液體孔率計檢驗薄膜過濾器的孔徑特性的測試方法 |
Test Method for Pore Size Characteristics of Membrane Filters Using Automated Liquid Porosimeter |
| ASTM E 1295-2001 |
用網紋水蚤(Dubia)進行三卵、復原毒性試驗的標準指南 |
Standard Guide for Conducting Three-Brood, Renewal Toxicity Tests with Ceriodaphnia dubia |
| ASTM E 1297-1996 |
用鈮輻射激活法測量快中子反應率的試驗方法 |
Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium |
| ASTM E 1298-1989 |
生物藥品中純凈度,污物和雜質的測定 |
Determination of Purity, Impurities and Contaminants in Biological Drug Products |
| ASTM E 1299-1996 |
人體溫度斷續測量用可重新使用的相變換型體溫計 |
Reusable Phase Change-Type Fever Thermometer for Intermittent Determination of Human Temperature |
| ASTM E 130-1987 |
石墨電極形狀和尺寸的名稱與符號 |
Designation of Shapes and Sizes of Graphite Electrodes |
| ASTM E 1300-1997 |
測定要求耐規定荷載的退火玻璃的最小厚度 |
Determining the Minimum Thickness of Annealed Glass Required to Resist a Specified Load |
| ASTM E 1301-1995 |
實驗室技術熟練檢驗計劃的制定和執行 |
Development and Operation of Laboratory Proficiency Testing Programs |
| ASTM E 1302-2000 |
在水可溶混合的金屬加工液條件下對動物劇毒性測試的標準指南 |
Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
| ASTM E 1303-1995 |
液相色譜法用折射指數檢測器 |
Refractive Index Detectors Used in Liquid Chromatography |
| ASTM E 1304-1997 |
金屬材料平面變形(V型槽口)斷裂韌度的測試方法(代替SAE ARP 1704) |
Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials (Supersedes SAE ARP 1704) |
| ASTM E 1306-1994 |
化合物測定用電弧溶化時活性和耐溶金屬及合金式樣的制備 |
Preparation of Reactive and Refractory Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition |
| ASTM E 1307-2000 |
平面遮蔽板用預硫化非金屬?gòu)?fù)合面板的表面制備和與結構芯層的結構膠合的標準實施規程 |
Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels |
| ASTM E 1308-1992 |
計算機管理材料性能數據庫中聚合物(熱固性合成橡膠除外)的識別 |
Identification of Polymers (Excludes Thermoset Elastomers) in Computerized Material Property Databases |
| ASTM E 1309-2000 |
數據庫中纖維增強聚合物復合材料的識別的標準指南 |
Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases |
| ASTM E 131-2000 |
分子光譜學的相關標準術語 |
Standard Terminology Relating to Molecular Spectroscopy |
| ASTM E 1310-1998 |
輻射鉻光學波導管劑量測定系統的使用 |
Use of a Radiochromic Opitcal Waveguide Dosimetry System |
| ASTM E 1311-1989 |
熱像儀用最低可檢測溫差的測試方法 |
Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems |
| ASTM E 1312-1999 |
居里溫度以上鐵磁圓柱棒產品的電磁(渦流)檢驗 |
Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature |
| ASTM E 1313-1995 |
材料性能數據的計算機化管理用數據記錄的采集和加工 |
Development of Data Records for Computerization of Material Property Data |
| ASTM E 1314-1989 |
與計算機管理的試驗報告和材料標志格式相關的結構化術語記錄 |
Structuring Terminological Records Relating to Computerized Test Reporting and Materials Designation Formats |
| ASTM E 1315-1993 |
帶有凸圓柱彎曲進入面鋼的超聲檢驗 |
Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces |
| ASTM E 1316-1997 |
無損檢驗術語 |
Terminology for Nondestructive Examinations |
| ASTM E 1317-1997 |
船舶表面涂層易燃性的試驗方法 |
Test Method for Flammability of Marine Surface Finishes |
| ASTM E 1318-2002 |
根據用戶要求的公路承重監測器系統和測試方法標準規范 |
Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods |
| ASTM E 1319-1998 |
高溫變形測量 |
High-Temperature Strain Measurement |
| ASTM E 132-1997 |
室溫下泊松比率的試驗方法 |
Test Method for Poissons Ratio at Room Temperature |
| ASTM E 1320-1995 |
鈦鑄件用基準X射線照相 |
Reference Radiographs for Titanium Castings |
| ASTM E 1321-1997 |
測量材料引燃和火焰曼延性能的測試方法 |
Test Method for Determining Material Ignition and Flame Spread Properties |
| ASTM E 1322-1990 |
實驗室認可體系評定員的選擇,訓練和評估 |
Selection, Training and Evaluation of Assessors for Laboratory Accreditation Systems |
| ASTM E 1323-1989 |
實驗室測量規程的評估和結果數據的統計分析 |
Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data |
| ASTM E 1324-2000 |
超聲檢驗裝置的某些電子特性測定的標準指南 |
Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Examination Instruments |
| ASTM E 1325-1991 |
與實驗裝置設計相關的術語 |
Terminology Relating to Design of Experiments |
| ASTM E 1326-1998 |
細菌計數用的非常規微生物試驗的評價 |
Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria |
| ASTM E 1327-1990 |
利用指甲部位評定個人保健洗手配方的測試方法 |
Test Method for Evaluation of Health Care Personnel Handwash Formulations by Utilizing Fingernail Regions |
| ASTM E 1328-1999 |
與光電太陽能轉換相關的標準術語 |
Standard Terminology Relating to Photovoltaic Solar Energy Conversion |
| ASTM E 1329-1996 |
光譜化學分析中控制圖表的驗證和使用 |
Verification and the Use of Control Charts in Spectrochemical Analysis |
| ASTM E 133-1992 |
蒸餾設備 |
Distillation Equipment |
| ASTM E 1331-1996 |
用半球體幾何形狀的分光光度法測量反射系數和顏色的測試方法 |
Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1332-1990 |
室外-室內透過等級測定用分類 |
Classification for Determination of Outdoor-Indoor Transmission Class |
| ASTM E 1333-1996 |
確定的試驗條件下用大容器測定木制品甲醛量的測試方法 |
Test Method for Determining Formaldehyde Levels from Wood Products Under Defined Test Conditions Using a Large Chamber |
| ASTM E 1334-1995 |
建筑物或設施耐用參數的制備 |
Preparing a Serviceability Rating of a Building or Facility |
| ASTM E 1335-1996 |
用吹灰法測定金條中純金的測試方法 |
Test Method for Determination of Gold in Bullion by Cupellation |
| ASTM E 1336-1996 |
用輻射分光法從視頻顯示單中獲取比色數據試驗方法 |
Test Method for Obtaining Colorimetric Data from a Video Display Unit by Spectroradiometry |
| ASTM E 1337-1990 |
用參考試驗輪胎測定縱向峰值制動系數的測試方法 |
Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Reference Test Tire |
| ASTM E 1338-1997 |
計算機化材料特性數據庫的金屬和合金的識別 |
the Identification of Metals and Alloys in Computerized Material Property Databases |
| ASTM E 1339-1990 |
計算機管理材料性能數據庫中鋁合金和零件的識別 |
Identification of Aluminum Alloys and Parts in Computerized Material Property Databases |
| ASTM E 1340-1996 |
計算機管理系統的快速形成原型 |
Rapid Prototyping of Computerized Systems |
| ASTM E 1341-1996 |
從比色法用從輻射源中獲取輻射分光數據 |
Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry |
| ASTM E 1342-1997 |
用冷凍、冷凍干燥和低溫養護法對細菌、真菌、原生生物、病毒、遺傳要素以及動物和植物組織的保存 |
Preservation by Freezing, Freeze-Drying and Low Temperature Maintenance of Bacteria, Fungi, Protista, Viruses, Genetic Elements and Animal and Plant Tissues |
| ASTM E 1343-1990 |
平板超濾膜的分子量界限評定的測試方法 |
Test Method for Molecular Weight Cutoff Evaluation of Flat Sheet Ultrafiltration Membranes |
| ASTM E 1344-1990 |
燃料乙醇生產設備的評定 |
Evaluation of Fuel Ethanol Manufacturing Facilities |
| ASTM E 1345-1998 |
用多次測量法降低顏色測量變異性的影響 |
Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements |
| ASTM E 1346-1990 |
感官評定用大量取樣,搬運和制備食用植物油 |
Bulk Sampling, Handling and Preparing Edible Vegetable Oils for Sensory Evaluation |
| ASTM E 1347-1997 |
用三色(濾色器)比色法進行顏色和色差測量的試驗方法 |
Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry |
| ASTM E 1348-1990 |
用半球體幾何形狀的分光光度法測量透明度和顏色的測試方法 |
Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry |
| ASTM E 1349-1990 |
用雙向幾何形狀的分光光度法測量反射系數和顏色的測試方法 |
Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry |
| ASTM E 135-2001 |
金屬、礦石及相關材料的分析化學的有關標準術語 |
Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 1350-1997 |
安裝前、安裝期間和安裝之后鎧裝熱電偶測試的試驗方法 |
Test Methods for Testing Sheathed Thermocouples Prior to, During and After Installation |
| ASTM E 1351-2001 |
現場金相復制品的生產和評定標準實施規范 |
Standard Practice for Production and Evaluation of Field Metallographic Replicas |
| ASTM E 1352-1999 |
模型化裝軟墊家具組件的抗香煙點燃性的試驗方法 |
Test Method for Cigarette Ignition Resistance of Mock-up Upholstered Furniture Assemblies |
| ASTM E 1353-1999 |
裝軟墊家具部分的耐香煙點燃性的試驗方法 |
Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture |
| ASTM E 1354-1999 |
用耗氧熱量計測量材料和產品的熱及可見煙霧釋放率的試驗方法 |
Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
| ASTM E 1355-1997 |
火焰模型預測能力的評價 |
Evaluating the Predictive Capability of Fire Models |
| ASTM E 1356-1998 |
用差示掃描量熱法或差示熱分析測量玻璃透過溫度的試驗方法 |
Test Method for Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis |
| ASTM E 1357-1990 |
用硫桿菌鐵氧化劑從黃鐵礦中測定鐵的雙浸取率的測試方法 |
Test Method for Determining the Rate of Bioleaching of Iron From Pyrite by Thiobacillus Ferrooxidans |
| ASTM E 1358-1997 |
用微波爐測定顆粒木材燃料含水量的測試方法 |
Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven |
| ASTM E 1359-1999 |
檢查無損檢驗機構 |
Surveying Nondestructive Testing Agencies |
| ASTM E 135a-2001 |
金屬、礦石及相關材料的分析化學的有關標準術語 |
Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials |
| ASTM E 136-1999 |
750℃時立式管爐中材料特性的標準試驗方法 |
Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750oC |
| ASTM E 1360-1990 |
按美國均勻色標系統光學學會規定說明顏色 |
Specifying Color by Using the Optical Society of America Uniform Color Scales System |
| ASTM E 1361-1990 |
X射線光譜測定分析中素間的效應校正 |
Correction of Interelement Effects in X-Ray Spectrometric Analysis |
| ASTM E 1362-1999 |
非濃縮器光電二次標準電池校準的標準試驗方法 |
Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells |
| ASTM E 1363-1997 |
熱機械分析儀溫度校準的測試方法 |
Test Method for Temperature Calibration of Thermomechanical Analyzers |
| ASTM E 1364-1995 |
用靜態水平儀法測量道路不平度的測試方法 |
Test Method for Measuring Road Roughness by Static Level Method |
| ASTM E 1366-1996 |
標準化水生物縮影:淡水 |
Standardized Aquatic Microcosms: Fresh Water |
| ASTM E 1367-1999 |
用海水中和河口處生長的端足類甲殼動物作10天靜態沉淀物毒性試驗 |
Conducting 10-Day Static Sediment Toxicity Tests with Marine and Estuarine Amphipods |
| ASTM E 1368-1997 |
石棉消除項目的外觀檢查 |
Visual Inspection of Asbestos Abatement Projects |
| ASTM E 1369-1998 |
建筑物和建筑系統經濟評估中處理不定性和風險的技術選擇 |
Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
| ASTM E 1370-1996 |
工作者和工作場地防護用空氣取樣策略 |
Air Sampling Strategies for Worker and Workplace Protection |
| ASTM E 1371-1990 |
磷銅合金或磷銅銀合金中磷的重量分析測定的測試方法 |
Test Method for Gravimetric Determination of Phosphorus in Phosphorus-Copper Alloys or Phosphorus-Copper-Silver Alloys |
| ASTM E 1372-1995 |
進行老鼠中90天口服毒藥研究的測試方法 |
Test Method for Conducting a 90-Day Oral Toxicity Study in Rats |
| ASTM E 1373-1992 |
進行老鼠的亞慢性吸入毒性研究的試驗方法 |
Test Method for Conducting a Subchronic Inhalation Toxicity Study in Rats |
| ASTM E 1374-1993 |
開放式辦公室聲學及其適用的ASTM標準 |
Open Office Acoustics and Applicable ASTM Standards |
| ASTM E 1375-1990 |
作為隔聲屏障的家具面板的區間衰減測量用測試方法 |
Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers |
| ASTM E 1376-1990 |
墻面涂層和家俱面板的聲反射區域間衰減測量用測試方法 |
Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels |
| ASTM E 1377-1999 |
實驗室開爾達玻璃燒瓶的標準規范 |
Standard Specification for Laboratory Glass Kjeldahl Flasks |
| ASTM E 1378-1999 |
實驗室玻璃多功能縮頸蒸餾燒瓶和長勁燒瓶的標準規范 |
Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks |
| ASTM E 1379-1990 |
實驗室玻璃杜瓦瓶 |
Laboratory Glass Dewar Flask |
| ASTM E 1380-1990 |
0.1毫升或稍大容量的多刻度實驗室移液管用色碼,不包括可處置的凝血酶原和一次性微量滴管 |
Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, but Excluding Disposable Prothrombin and Disposable Micropipets |
| ASTM E 1381-1995 |
臨床實驗室裝置和計算機系統間傳送信息的低級協議 |
Low-Level Protocol to Transfer Messages Between Clinical Laboratory Instruments and Computer Systems |
| ASTM E 1382-1997 |
用半自動和自動圖象分析測量平均粒度的測試方法 |
Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis |
| ASTM E 1384-1999 |
管理的自動化原始記錄的內容和結構描述指南 |
Description for Content and Structure of an Automated Primary Record of Care |
| ASTM E 1385-1995 |
用蒸餾法對從火災瓦礫樣品中獲取的可燃或易燃液體殘?jiān)姆蛛x和濃縮 |
Separation and Concentration of Flammable or Combustible Liquid Residues from Fire Debris Samples by Steam Distillation |
| ASTM E 1386-1995 |
用溶劑萃取法對火災瓦礫樣品中獲取的可燃或易燃液體殘?jiān)姆蛛x和濃縮 |
Separation and Concentration of Flammable or Combustible Liquid Residues from Fire Debris Samples by Solvent Extraction |
| ASTM E 1387-1995 |
用氣相色譜法對從火災瓦礫樣品中獲取的可燃或易燃液體殘?jiān)脑囼?yàn)方法 |
Test Method for Flammable or Combustible Liquid Residues in Extracts from Samples of Fire Debris by Gas Chromatography |
| ASTM E 1388-1995 |
對從火災瓦礫樣品中獲取的頭上空間蒸汽取樣 |
Sampling of Headspace Vapors from Fire Debris Samples |
| ASTM E 1389-1995 |
用酸洗法對火災瓦礫樣品提取物的清洗 |
Cleanup of Fire Debris Sample Extracts by Acid Stripping |
| ASTM E 139-2000 |
金屬材料傳導蠕變、蠕變斷裂和應力斷裂的標準試驗方法 |
Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials |
| ASTM E 1390-1990 |
用于觀察工業射線照相的照明裝置 |
Illuminators Used for Viewing Industrial Radiographs |
| ASTM E 1391-1994 |
毒理測定用沉積物的收集,存儲,表征和操作方法 |
Collection, Storage, Characterization and Manipulation of Sediments for Toxicological Testing |
| ASTM E 1392-1996 |
鏡面或反射面角度分析光散射測量 |
Angle Resolved Optical Scatter Measurements on Specular or Diffuse Surfaces |
| ASTM E 1393-1990 |
用尖狀往復式拋光機械測定瀝青路面及樣品精整性的試驗方法 |
Test Method for Determining the Polishability of Bituminous Pavement Surfaces and Specimens by Means of the Penn State Reciprocating Polishing Machine |
| ASTM E 1394-1997 |
臨床設備和計算機系統之間的信息傳遞 |
Transferring Information Between Clinical Instruments and Computer Systems |
| ASTM E 1395-1990 |
低加熱辣椒的感官評定試驗方法 |
Test Method for Sensory Evaluation of Low Heat Chilies |
| ASTM E 1396-1990 |
油樹脂辣椒感官評定的試驗方法 |
Test Method for Sensory Evaluation of Oleoresin Capsicum |
| ASTM E 1397-1991 |
試管內鼠肝細胞DNA修復化驗 |
in vitro Rat Hepatocyte DNA Repair Assay |
| ASTM E 1398-1991 |
鼠體內肝細胞DNA修復化驗 |
in vivo Rat Hepatocyte DNA Repair Assay |
| ASTM E 1399-1997 |
建筑連接系統最小和最大連接寬度的測量和循環運動的試驗方法 |
Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM E 140-2002 |
金屬標準硬度換算表(布氏硬度、維氏硬度、洛氏硬度、表面硬度、努氏硬度和肖氏硬度之間的關系) |
Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com