標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM E2231-2003 |
防火焰擴散和隔煙用管道和導管的安裝和樣品制備的標準規程 |
(Standard Practice on Specimen Preparation and Mounting for Pipe and Duct Insulation for Flame Spread and Smoke Obscuration ) |
| ANSI/ASTM E2232-2002 |
在輻射處理應用中計算被吸收劑量精確法的使用和選擇指南 |
(Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications ) |
| ANSI/ASTM E2233-2002 |
通過Aql標記的變數對產品流抽樣的實施規程 |
(Practice for Sampling a Stream of Product by Variables Indexed by Aql ) |
| ANSI/ASTM E2234-2002 |
通過Aql標記的屬性對產品流抽樣的實施規程 |
(Practice for Sampling a Stream of Product by Attributes Indexed by Aql ) |
| ANSI/ASTM E2239-2003 |
建筑物中鉛危害目視評定的實施規程 |
(Practice for Conducting Visual Assessments for Lead Hazards in Buildings ) |
| ANSI/ASTM E2239-2004 |
建筑物中鉛危害目視評定的實施規程 |
|
| ANSI/ASTM E2241-2002 |
評定密封絕緣玻璃裝置上吸收性電致變色涂層在室溫下的電流-電壓周期穩定性的試驗方法 |
(Test Method for Assessing the Current-voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units ) |
| ANSI/ASTM E2252-2003 |
住宅設施或兒童用具中已知風險用鉛危害降低方法選定的實施規程 |
(Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities ) |
| ANSI/ASTM E2252-2004 |
住宅建筑或兒童設施中已識別風險的鉛危害降低方法選擇的實施規程 |
|
| ANSI/ASTM E2255-2003 |
執行建筑物中鉛危害視覺評定的實施規范 |
(Practice for Conducting Visual Assessments for Lead Hazards in Buildings ) |
| ANSI/ASTM E2255-2004 |
建筑物中鉛危害目視評定的實施規程 |
|
| ANSI/ASTM E2257-2003 |
墻壁和天花板材料和組件的房屋著火試驗 |
(Room Fire Test of Wall and Ceiling Materials and Assemblies ) |
| ANSI/ASTM E2265-2003 |
混凝土和磚石工程中錨固件和緊固件的術語 |
(Terminology for Anchors and Fasteners in Concrete and Masonry ) |
| ANSI/ASTM E2268-2004 |
用快速脈沖氣壓差法進行外窗、天窗和門的水滲透性試驗方法 |
|
| ANSI/ASTM E2269-2003 |
用氣相色譜法測定密封絕緣玻璃組件中氬濃度的試驗方法 |
(Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Gas Chromatography ) |
| ANSI/ASTM E2270-2003 |
不安全狀態下對建筑物的正面進行周期性檢驗的實施規范 |
(Practice for Periodic Inspection of Building Facades for Unsafe Conditions ) |
| ANSI/ASTM E2271-2003 |
隨著鉛危害作用在獨院住宅和兒童設施中的逐漸降低檢驗安全距離的實施規范 |
(Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-family Dwellings and Child-occupied Facilities ) |
| ANSI/ASTM E2271-2004 |
隨著鉛危害作用在獨院住宅和兒童設施中的逐漸降低檢驗安全距離的實施規程 |
|
| ANSI/ASTM E2273-2003 |
外部絕緣和精整系統(EIFS)包壁組件排水效率的測定的試驗方法 |
(Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies ) |
| ANSI/ASTM E2280-2003 |
配備有保健設施的病房內具有軟墊座椅的表面火險評估指南 |
(Guide for the Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities ) |
| ANSI/ASTM E2284-2003 |
當樣品中出現零反應時使用屬性數據為不合格項的系數或數量或不合格發生率設定上置信限的實施規范 |
(Practice for Setting an Upper Confidence Bound for a Fraction or Number of Non-conforming Items, or a Rate of Occurence for Non-conformities, Using Attribute Data, When There Is a Zero Response in the Sample ) |
| ANSI/ASTM E23-2002 |
金屬材料切口試棒沖擊試驗的試驗方法 |
(Test Methods for Notched Bar Impact Testing of Metallic Materials ) |
| ANSI/ASTM E23-2005 |
金屬材料的切口試條沖擊試驗的試驗方法 |
|
| ANSI/ASTM E230-2002 |
溫度規范.標準化熱電偶的電動勢(EMF)表 |
(Specification for Temperature - Electromotive Force (EMF) Tables for Standardized Thermocouples ) |
| ANSI/ASTM E2304a-2003 |
LIF熒光照相膠片劑量測定系統使用的實施規程 |
(Practice for Use of a LIF Photo-Fluorescent Film Dosimetry System ) |
| ANSI/ASTM E2307-2004 |
使用中型多層測試儀器測定周邊擋火墻系統耐火性的試驗方法 |
|
| ANSI/ASTM E2319-2004 |
通過特定壓差下的樣品測定通過外窗、幕墻和門的正面和側面的空氣流的試驗方法 |
|
| ANSI/ASTM E2320-2004 |
熱環境和室內空氣條件下用辦公室設施的適用性分類 |
|
| ANSI/ASTM E2335-2004 |
實驗室監視器指南 |
|
| ANSI/ASTM E2336-2004 |
防火潤滑脂管道封裝系統的試驗方法 |
|
| ANSI/ASTM E2343-2004 |
常規劑量測定系統的性能表征標準實施規范 |
|
| ANSI/ASTM E2343-2004 |
常規劑量測定系統的性能表征標準實施規范 |
(Standard Practice for Performance Characterization of Routine Dosimetery Systems ) |
| ANSI/ASTM E2354-2004 |
評估密封絕緣玻璃裝置內吸收性電色涂層耐用性的指南 |
|
| ANSI/ASTM E2355-2004 |
鑲玻璃表面上吸收性電色涂層一致性測量的試驗方法 |
|
| ANSI/ASTM E2364-2004 |
健康護理中的語音識別技術產品指南 |
|
| ANSI/ASTM E2369-2004 |
護理記錄的連續性規范 |
|
| ANSI/ASTM E2381-2004 |
流化床和液體流的輻射處理中劑量測定指南 |
|
| ANSI/ASTM E2405-2005 |
使用垂直定向樣品的中型試驗測定材料耐火和耐熱參數的試驗方法 |
|
| ANSI/ASTM E241-2004 |
提高房屋建筑物抗水損壞耐久性的實施規程 |
|
| ANSI/ASTM E283-2004 |
通過樣品的規定壓差測定外窗、幕墻和門的漏氣率的試驗方法 |
|
| ANSI/ASTM E329-2003 |
建筑材料試驗和/或檢驗機構的規范 |
(Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction ) |
| ANSI/ASTM E329-2005 |
從事施工材料試驗和/或檢驗的機構的規范 |
|
| ANSI/ASTM E330-2002 |
用均勻靜態大氣壓差法測定外窗、隔墻和門結構性能的試驗方法(04.11) |
(Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Uniform Static Air Pressure Difference (04.11) ) |
| ANSI/ASTM E405-2004 |
窗磨損試驗旋轉操作的試驗方法 |
|
| ANSI/ASTM E424-2002 |
片材的太陽能量傳輸性和反射性(陸地上)的試驗方法 |
(Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials ) |
| ANSI/ASTM E455-2004 |
建筑物構架樓板或屋頂隔板結構的靜態負載試驗方法 |
|
| ANSI/ASTM E456-2002 |
質量和統計學的相關術語 |
(Terminology Relating to Quality and Statistics ) |
| ANSI/ASTM E529-2004 |
房屋建筑用桁條和大梁的彎曲試驗執行指南 |
|
| ANSI/ASTM E535-2005 |
著火試驗響應標準編寫的實施規程 |
|
| ANSI/ASTM E535-2005 |
著火試驗響應標準編寫的實施規程 |
|
| ANSI/ASTM E535a-2005 |
著火試驗反應標準編寫規程 |
|
| ANSI/ASTM E541-2002 |
從事建造建筑物的系統分析和符合性保證的機構的準則 |
(Criteria for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building ) |
| ANSI/ASTM E648-2003 |
用輻射熱能源測定地板包覆材料臨界輻射通量的試驗方法 |
(Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source ) |
| ANSI/ASTM E648-2004 |
使用輻射熱源的地板覆蓋系統的臨界輻射通量的試驗方法 |
|
| ANSI/ASTM E651-2002 |
對從事建造建筑物的系統分析和符合性保證的機構的能力評價導則 |
(Guidelines for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building ) |
| ANSI/ASTM E699-2003 |
檢驗機構評價的標準規程 |
(Practice for Criteria for Evaluation of Agencies Involved in Testing ) |
| ANSI/ASTM E72-2002 |
建筑結構用板條的傳導強度的試驗方法 |
(Methods of Conducting Strength Tests of Panels for Building Construction (04.11) ) |
| ANSI/ASTM E8-2004 |
金屬材料抗拉試驗的試驗方法 |
|
| ANSI/ASTM E800-2005 |
著火時存在或產生的氣體測量指南 |
|
| ANSI/ASTM E814-2002 |
穿透防火墻的著火試驗方法 |
(Methods for Fire Tests of Through-Penetration Fire Stops ) |
| ANSI/ASTM E833a-2002 |
建筑經濟學術語 |
(Terminology of Building Ergonomics (04.07) ) |
| ANSI/ASTM E84-2003 |
建筑材料表面燃燒特性的試驗方法 |
(Test Method for Surface Burning Characteristics of Building Materials ) |
| ANSI/ASTM E84-2004 |
建筑材料的表面燃燒特性的試驗方法 |
|
| ANSI/ASTM E84-2005 |
建筑材料表面燃燒特性的試驗方法 |
|
| ANSI/ASTM E865-2003 |
蜂窩夾層結構板用結構膜粘結劑規范 |
(Specification for Structural Film Adhesives for Honeycomb Sandwich Panels (04.11) ) |
| ANSI/ASTM E8M-2004 |
金屬材料抗拉試驗的試驗方法(米制) |
|
| ANSI/ASTM E906-2004 |
材料和產品的熱和可見煙霧釋放率的試驗方法 |
|
| ANSI/ASTM E917-2002 |
測定建筑物和建筑系統使用期成本的實施規程 |
(Practice for Measuring Life-Cycle Costs of Buildings and Building Systems (04.11) ) |
| ANSI/ASTM E990-2004 |
蜂窩狀夾層遮蔽板用芯層拼接粘結劑規范 |
|
| ANSI/ASTM F 1000-1997 |
管道系統制圖符號實施規程 |
Practice for Piping System Drawing Symbols |
| ANSI/ASTM F 1002-1996 |
防止工人遭受特種熔化物質和有關高溫侵害用防護服裝的性能規范 |
Performance Specification for Protective Clothing for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards |
| ANSI/ASTM F 1003-1997 |
摩托救生艇探照燈規范 |
Specification for Searchlights on Motor Lifeboats |
| ANSI/ASTM F 1005-1997 |
采暖、通風與空調導管形狀的實施規程.設計配置的描述和識別 |
Practice for HVAC Duct Shapes; Identification and Description of Design Configuration |
| ANSI/ASTM F 1006-1997 |
船用管道裝置用液滴分離器規范 |
Specification for Entrainment Separators for Use in Marine Piping Applications |
| ANSI/ASTM F 1007-1997 |
船用套裝滑動成型的管道膨脹節規范 |
Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application |
| ANSI/ASTM F 1020-1997 |
船用暗線閥實施規程 |
Practice for Line Blind Valves for Marine Applications |
| ANSI/ASTM F 1040-2001 |
空氣調節粘性沖擊、干式、可置換的收塵器裝置規范 |
Specification for Filter Units, Air Conditioning Viscous-Impingement and Dry Types, Replaceabl |
| ANSI/ASTM F 1041-1995 |
聚烯烴燃氣壓力管和配件的擠壓指南 |
Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Fittings |
| ANSI/ASTM F 1052-1996 |
氣密的全密封化工防護套服的加壓試驗實施規程 |
Practice for Pressure Testing of Gas-Tight Totally Encapsulating Chemical-Protective Suits |
| ANSI/ASTM F 1053-1997 |
鋼制船體結構公差指南 |
Guide for Steel Hull Construction Tolerances |
| ANSI/ASTM F 1055-1996 |
外徑控制的聚乙烯管和管路用電熔型聚乙烯配件規范 |
Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing |
| ANSI/ASTM F 1056-1996 |
套管熔融連接聚乙烯管和配件用套管熔融工具規范 |
Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings |
| ANSI/ASTM F 1074-1997 |
焊接喇叭型繩栓規范 |
Specification for Cleats, Welded Horn Type |
| ANSI/ASTM F 1076-1997 |
管用擴張焊接及銀黃銅套管連接件實施規程 |
Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube |
| ANSI/ASTM F 1092-1997 |
擠拔玻璃纖維增強塑料制露天防風暴和方型防護扶手規范 |
Specification for Fiberglass (Grp) Pultruded Open-Weather Storm- and Guard-Square Handrails |
| ANSI/ASTM F 1097-1997 |
耐火灰漿(高溫,空氣凝固)規范 |
Specification for Mortar, Refractory (High Temperature, Air Setting) |
| ANSI/ASTM F 1134-1997 |
船用電動機和發電機絕緣電阻監測器規范 |
Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
| ANSI/ASTM F 1145-1997 |
冷鍛、焊接、鍛制松緊螺紋扣規范 |
Specification for Turnbuckles, Swaged, Welded, Cast, Forged |
| ANSI/ASTM F 1163-2001 |
賽馬運動和騎馬用安全帽規范 |
Specification for Headgear Used in Horse Sports and Horseback Riding |
| ANSI/ASTM F 1173-2001 |
船用熱固樹脂玻璃纖維管和配件規范 |
Specification for Thermosetting Resin Fiberglass Pipe and Fittings to be Used for Marine Applications |
| ANSI/ASTM F 1176-2001 |
最大工作壓力為63psi(磅/平方英寸)熱塑灌溉系統的設計和安裝實施規程 |
Practice for Design and Installation of Thermoplastic Irrigation Systems with Maximum Working Pressure of 63 PSI |
| ANSI/ASTM F 1178-1997 |
上光系統、烘烤、金屬連接裝置和家具規范 |
Specification for Enameling System, Baking, Metal Joiner Work and Furniture |
| ANSI/ASTM F 1179-1997 |
螺栓螺紋鎖定厭氧復合物的檢驗程序的實施規程 |
Practice for Inspection Procedure for Use of Anaerobic Thread Locking Compounds with Studs |
| ANSI/ASTM F 1182-1997 |
陽極鍍鋅合金規范 |
Specification for Anodes, Sacrificial Zinc Alloy |
| ANSI/ASTM F 1198-1997 |
艦艇防火監視系統指南 |
Guide for Shipboard Fire Detection Systems |
| ANSI/ASTM F 1207-1997 |
監視激活電子系統中接地電阻用電絕緣監視器規范 |
Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems |
| ANSI/ASTM F 1240-1997 |
鞋靴在有不同外來雜質界面的通道表面上的防滑性測量分類結果指南 |
Guide for Categorizing Results of Footwear Slip Resistance Measurements on Walkway Surfaces with an Interface of Various Foreign Substances |
| ANSI/ASTM F 1245-1997 |
船舶用壓縮和自閉型、單式與雙式水龍頭規范 |
Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ANSI/ASTM F 1248-1996 |
測定聚氯乙烯管抗環境應力破裂性的試驗方法 |
Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe |
| ANSI/ASTM F 1271-1997 |
船上儲罐液體過壓保護裝置用溢流閥規范 |
Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications |
| ANSI/ASTM F 1273-1997 |
防火用油罐通氣孔規范 |
Specification for Tank Vent Flame Arresters |
| ANSI/ASTM F 1291-1999 |
利用加熱的人體模型測量衣服隔熱性的試驗方法 |
Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin |
| ANSI/ASTM F 1298-1997 |
船用柔性擴展型球連接規范 |
Specification for Flexible, Expansion-Type Ball Joints for Marine Applications |
| ANSI/ASTM F 1301-1990 |
化工防護服裝標記的實施規程 |
Practice for Labeling Chemical Protective Clothing |
| ANSI/ASTM F 1310-1997 |
65加侖配藥罐規范 |
Specification for 65-Gallon Dispensing Tank |
| ANSI/ASTM F 1311-1997 |
大直徑制造的碳鋼法蘭規范 |
Specification for Large-Diameter Fabricated Carbon Steel Flanges |
| ANSI/ASTM F 1326-1996 |
測量通用真空吸塵器的最大干燥空間的試驗方法 |
Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners |
| ANSI/ASTM F 1330-1997 |
金屬研磨法除去管內氧化皮指南 |
Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe |
| ANSI/ASTM F 1331-1997 |
電氣和電子操作室中可移動板上乙烯鋪面覆蓋物的安裝程序實施規程 |
Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces |
| ANSI/ASTM F 1333-1997 |
消防和泡沫滅火站操縱室結構規范 |
Specification for Construction of Fire and Foam Station Cabinets |
| ANSI/ASTM F 1334-1996 |
測定真空吸塵器噪聲能量級別的試驗方法 |
Test Method for Determining Sound Power Level of Vacuum Cleaners |
| ANSI/ASTM F 1336-2001 |
裝密封墊的聚氯乙烯(PVC)下水道管件規范 |
Specification for Poly (Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
| ANSI/ASTM F 1337-1997 |
海船和海洋系統、設備用人體工效要求實施規程 |
Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities |
| ANSI/ASTM F 1338-1997 |
船用主動力中速柴油發動機覆蓋性能和機組最小工作范圍指南 |
Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly |
| ANSI/ASTM F 1342-1996 |
防護服裝耐穿刺能力的測試方法 |
Test Method for Protective Clothing Material Resistance to Puncture |
| ANSI/ASTM F 1347-1997 |
手工操作的加燃料軟管卷盤規范 |
Specification for Manually Operated Fueling Hose Reels |
| ANSI/ASTM F 1348-1997 |
氣動轉式去氧化皮規范 |
Specification for Pneumatic Rotary Descaling Machines |
| ANSI/ASTM F 1380-1996 |
聚丁烯(PB)管用金屬插入配件規范 |
Specification for Metal Insert Fittings for Polybutylene (PB) Tubing |
| ANSI/ASTM F 1386-1997 |
油罐測深用測深管和操作板的結構指南 |
Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding |
| ANSI/ASTM F 1409-1996 |
清潔地毯時吸塵器直線移動的試驗方法 |
Test Method for Straight Line Movement of Cleaners while Cleaning Carpets |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com