ASTM——美國材料與實驗協會標準翻譯目錄查詢

咨詢熱線：010-6973-5438

標準號	中文名稱	英文名稱
ANSI/ASTM F1673-2004	聚偏氟乙烯(PVDF)腐蝕性廢物排放系統的規范
ANSI/ASTM F1695-2003	熱底式燒烤器具性能的試驗方法	(Test Method for the Performance of Underfired Broilers )
ANSI/ASTM F1697-2002	聚氯乙烯 (PVC) 排污管道和管件規范	(Specification for Poly (Vinyl Chloride) (PVC) Drain, Waste and Pipe and Fittings )
ANSI/ASTM F1698-2002	現存排污管和管道修復用聚氯乙烯管線襯里和水泥薄漿的安裝實施規程	(Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits )
ANSI/ASTM F1702-2002	利用輕量級便攜式儀器測量立體聲播放系統震動衰減特性的試驗方法	(Test Method for Measuring Shock-attenuation Characteristics of Natural Playing Surface Systems Using Lightweight Portable Apparatus )
ANSI/ASTM F1720-2004	使用加熱模型測量睡袋保溫性的試驗方法
ANSI/ASTM F1734-2003	為避免聚乙烯燃?xì)夤荛L期受損用擠壓工具、管和擠壓工序組合的鑒定實施規程	(Practice for Qualification of a Combination of Squeeze Tool, Pipe and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe )
ANSI/ASTM F1735-2002	修復現有的人可進入的污水管道用PVC襯里的聚氯乙烯(PVC)異型帶材規范	(Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liner for Rehabilitation of Existing Man-Entry Sewers and Conduits )
ANSI/ASTM F1741-2005	現有排水管和管道修復用機械螺旋纏繞聚氯乙烯(PVC)內襯管安裝的實施規程
ANSI/ASTM F1741a-2002	排水溝和管道修復用機械螺旋纏繞聚氯乙烯(PVC)內襯管安裝的實施規程	(Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits )
ANSI/ASTM F1750-2005	彩電球槍加螺紋推進裝置接口標準規范
ANSI/ASTM F1777-2002	彩球運動場的規范	(Specification for Paintball Field Operations )
ANSI/ASTM F1787-2003	攜帶式電熱輪轉烤肉器烤箱性能的試驗方法	(Test Method for Performance of Rotisserie Ovens )
ANSI/ASTM F1802-2004	溢流閥性能試驗的試驗方法
ANSI/ASTM F1803-2004	基于受控內徑的聚氯乙烯封閉式異型重力管和配件的規范
ANSI/ASTM F1807-2002	SDR9交聯聚乙烯(Pex)管用的利用卷制銅環的金屬內插件規范	(Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for Sdr9 Cross-Linked Polyethylene (Pex) Tubing )
ANSI/ASTM F1807-2004	SDR9交聯聚乙烯管用卷制銅環的金屬內插件規范
ANSI/ASTM F1808-2003	水面艦艇的重量控制技術要求導則	(Guide for Weight Control Technical Requirements for Surface Ships )
ANSI/ASTM F1853-2003	測定睡袋包裝體積的試驗方法	(Test Method for Measuring Sleeping Bag Packing Volume )
ANSI/ASTM F1865-2002	交聯聚乙烯管(PEX)用的、帶壓力套管的機械冷膨脹插入式配件的規范	(Specification for Mechanical Cold Expansion Insert Fitting with Compression Sleeve for Crosslinked Polyethylene PEX Tubing )
ANSI/ASTM F1871-2002	現存排污管和管道修復用波紋狀/形成聚氯乙烯管道形狀規范	(Specification for Folded/formed Poly (Vinyl Chloride) Pipe Type a for Existing Sewer and Conduit Rehabilitation )
ANSI/ASTM F1883-2003	用美國線規(AWG)或米制單位選擇電線和電纜規格的實施規程	(Practice for Selection of Wire and Cable Size, in AWG or Metric Units )
ANSI/ASTM F1887-2003	測量棒球和壘球回彈系數的試驗方法	(Test Method for Measuring the Coefficient of Restitution COR of Baseballs and Softballs )
ANSI/ASTM F1888-2003	棒球和壘球受壓位移的試驗方法	(Test Method for Compression-Displacement of Baseballs and Softballs )
ANSI/ASTM F1901-2004	屋頂排水系統用聚乙烯管道和配件規范
ANSI/ASTM F1919-2003	單邊和雙邊、自加熱、柜臺式或固定于支架上的燃?xì)饣螂娂訜崞郊邋佉?guī)范	(Specification for Griddles, Single and Double Sided, Self-Heating, Counter or Stand Mounted Gas and Electric Fired )
ANSI/ASTM F1920-2003	架式輸送裝置、熱水消毒和商用洗碗機的能量性能的試驗方法	(Test Method for the Energy Performance of Rack Conveyor, Hot Water Sanitizing, Commercial Dishwashing Machines )
ANSI/ASTM F1924-2005	外徑可控的聚乙烯供氣管道用塑料機械配件規范
ANSI/ASTM F1937-2005	馬術運動和騎馬用身體防護設備的規范
ANSI/ASTM F1947-2004	折疊式聚氯乙烯管(PVC)裝進現有污水管和下水管道中的實施規程
ANSI/ASTM F1948-2005	外部直徑受控的熱塑性氣體配送管用金屬機械配件規范
ANSI/ASTM F1960-2004	交聯聚乙烯(PEX)管用具有過氧化物PEX增強環的冷膨脹配件的規范
ANSI/ASTM F1960b-2002	用帶交聯聚乙烯管的過氧化聚乙烯增強環的冷膨脹配件規范	(Specification for Cold Expansion Fittings with Peroxide PEX Reinforcing Rings for Use with Cross-Linked Polyethylene (PEX) Tubing )
ANSI/ASTM F1961-2002	交聯聚乙烯(PEX)管用帶盤簧的金屬機械冷壓擴口式管件規范	(Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing )
ANSI/ASTM F1970-2005	聚氯乙烯(PVC)或氯化聚氯乙烯(CPVC)系統專用工程配件、附件或閥門的規范
ANSI/ASTM F1973-2002	聚乙烯(PE)燃料氣分配系統中工廠裝配的陽極衰減升降器和過渡配件的規范	(Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) Fuel Gas Distribution Systems )
ANSI/ASTM F1974-2004	聚乙烯/鋁/聚乙烯和交聯聚乙烯/鋁/交聯聚乙烯復合壓力管用金屬內插件規范
ANSI/ASTM F1977-2004	測定真空吸塵器系統初始部分過濾效率的試驗方法
ANSI/ASTM F1979-2005	彩彈球運動用球的規范
ANSI/ASTM F2019-2003	將玻璃纖維增強塑料(GRP)現場硫化熱固性樹脂管(CIPP)現場拖拉并安裝進已有管道的操作規程	(Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) )
ANSI/ASTM F2023-2004	評價交聯聚乙烯(PEX)熱塑管耐氧化性的試驗方法
ANSI/ASTM F2023-2005	評價交聯聚乙烯(PEX)管道及系統耐加氯熱水氧化性的試驗方法
ANSI/ASTM F2040-2003	娛樂滑雪運動用防護帽的規范	(Specification for Helmets Used for Recreational Snow Sports )
ANSI/ASTM F2044-2005	電氣液位指示設備規范
ANSI/ASTM F2080-2004	交聯聚乙烯管用帶金屬壓縮管套的冷擴張配件的規范
ANSI/ASTM F2080-2004	交聯聚乙烯管用帶金屬壓縮管套的冷擴張配件的規范
ANSI/ASTM F2098-2004	保證SDR9交聯聚乙烯(PEX)管用金屬插件安全的不銹鋼夾子的試驗方法
ANSI/ASTM F2106-2003	機動人力蹋車結構和性能特征評定的試驗方法	(Test Method for Evaluating Design and Performance Characteristics of Motorized Treadmills )
ANSI/ASTM F2115-2003	電動踏旋器試驗方法	(Test Method for Motorized Treadmills )
ANSI/ASTM F2115-2005	電動踏車試驗方法
ANSI/ASTM F2131-2003	密封管用聚氯乙烯薄試樣的卻貝沖擊試驗	(Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes )
ANSI/ASTM F2143-2004	冷藏食物餐具架及工作臺性能的試驗方法
ANSI/ASTM F2153-2002	背負能力測量標準	(Standard for the Measurement of Backpack Capacity )
ANSI/ASTM F2157-2002	合成表面通行線路規范	(Specification for Synthetic Surfaced Running Tracks )
ANSI/ASTM F2159-2003	SDR9交聯聚乙烯(PEX)管道使用的利用銅夾緊環固定的塑料插入式管件規程	(Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing )
ANSI/ASTM F2159-2005	SDR9交聯聚乙烯(PEX)管道用帶銅夾緊環固的嵌入式塑料配件規范
ANSI/ASTM F2164-2002	采用液壓法對聚乙烯壓力管道系統進行場漏試驗的操作規程	(Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure )
ANSI/ASTM F2165-2002	預絕緣軟管規范	(Specification for Flexible Pre-insulated Piping )
ANSI/ASTM F2168-2002	包裝材料規范.石墨的波紋帶或網紋帶和模制環的規范	(Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape and Die-Formed Ring )
ANSI/ASTM F2173-2002	監測病人呼吸混合的氧監測器.安全要求	(ISO 7767, Oxygen Monitors for Monitoring Patient Breathing Mixtures - Safety Requirements )
ANSI/ASTM F2174-2002	驗證聲發射傳感器響應的實施規程	(Practice for Verifying Acoustic Emmission Sensor Response )
ANSI/ASTM F2176-2002	聚乙烯管道及內管道用機械耦合件規范	(Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct )
ANSI/ASTM F2177-2002	ISO 5361,麻醉和呼吸設備.氣管導管和連接件	(ISO 5361, Anaesthetic and Respiratory Equipment - Tracheal Tubes and Connectors )
ANSI/ASTM F2184-2002	彩球欄網用安裝指南	(Installation Guide for Paintball Barrier Netting )
ANSI/ASTM F2189-2002	氮氧化物監測儀的特殊要求的規范	(Specification for Particular Requirements for Nitric Oxide Monitors )
ANSI/ASTM F2191-2002	石墨或碳編織紗線包裝材料規范	(Specification for Packing Material, Graphitic or Carbon Braided Yarn )
ANSI/ASTM F2192-2002	測定和報告海事救難裝置的靠船能量和反應、系泊反應和偏差的試驗方法	(Test Method to Determine and Report the Berthing Energy and Reaction and the Mooring Reaction and Deflection of Marine Fenders )
ANSI/ASTM F2192-2005	測定和報告海事救難裝置的靠船能量和反應的試驗方法
ANSI/ASTM F2202-2002	慢烹飪/手持式烤箱和食品保溫柜的標準規范	(Standard Specification for Slow Cook/Hold Ovens and Food Warming Cabinet )
ANSI/ASTM F2206-2002	熔縫的聚乙烯塑料管,管配件,片材,板材或砧板材制造的配件規范	(Specification for Fabricated Fittings of Butt-fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock or Block Stock )
ANSI/ASTM F2207-2002	金屬輸氣管道的修復用住宅中修理管道襯套系統規范	(Specification for Cured-in-place Pipe Lining System for Rehabilitation of Metallic Gas Pipes )
ANSI/ASTM F2216-2003	選定了強度的設備規范	(Specification for Selectorized Strength Equipment )
ANSI/ASTM F2216-2005	選定了強度的設備規范
ANSI/ASTM F2219-2003	高速棒球球棒性能因數測量的試驗方法	(Test Methods for Measuring High Speed Baseball Bat Performance Factor )
ANSI/ASTM F2220-2003	頭形規范	(Specification for Headforms )
ANSI/ASTM F2221-2002	醫用吸引設備.第2部分:人工動力吸引設備	(Medical Suction Equipment- Part 2: Manually Powered Suction Equipment )
ANSI/ASTM F2222-2002	醫用吸引設備.真空或壓力源驅動的吸引設備	(Medical Suction Equipment-suction Equipment Powered from a Vacuum or Pressure Source )
ANSI/ASTM F2223-2003	運動場表面材料ASTM標準的導則	(Guide for ASTM Standards on Playground Surfacing )
ANSI/ASTM F2223-2004	運動場表面材料用ASTM標準的指南
ANSI/ASTM F2225-2003	蹦床外罩的消費者安全規范	(Specification for Consumer Trampoline Enclosures )
ANSI/ASTM F2237-2003	立式過度燃燒焙烤用具性能的試驗方法	(Test Method for the Performance of Upright Overfired Broilers )
ANSI/ASTM F2238-2003	快速烹飪爐性能的試驗方法	(Test Method for the Performance of Rapid Cook Ovens )
ANSI/ASTM F2239-2003	帶式焙烤用具性能的試驗方法	(Test Method for Performance of Conveyor Broilers )
ANSI/ASTM F2262-2004	OD控制的SDR9交聯聚乙烯/鋁/交聯聚乙烯管的規范
ANSI/ASTM F2262-2005	OD可控的SDR9交聯聚乙烯/鋁/交聯聚乙烯管的規范
ANSI/ASTM F2263-2005	聚乙烯(PE)管抗氯化水氧化性評價的試驗方法
ANSI/ASTM F2265-2003	醫用抽吸設備.第1部分:電動抽吸設備.安全要求	(Medical Suction Equipment - Part 1: Electrically Powered Suction Equipment - Safety Requirements )
ANSI/ASTM F2268-2003	自行車系列號規范	(Specification for Bicycle Serial Numbers )
ANSI/ASTM F2270-2004	運動場上警示跑道區域的建造和維護用指南
ANSI/ASTM F2273-2003	自行車車叉的試驗方法	(Test Methods for Bicycle Forks )
ANSI/ASTM F2274-2003	條件3的自行車輪叉規范	(Specification for Condition 3 Bicycle Forks )
ANSI/ASTM F2275-2003	打獵器材(Treestand)生產廠質量保證計劃實施規程	(Practice for Treestand Manufacturer Quality Assurance Program )
ANSI/ASTM F2276-2005	健身器材規范
ANSI/ASTM F2277-2003	對選定的強力設備的設計和性能特征進行評定的試驗方法	(Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment )
ANSI/ASTM F2278-2003	評價彩彈攔截網的試驗方法	(Test Method for Evaluating Paintball Barrier Netting )
ANSI/ASTM F2283-2004	船載除油系統的規范
ANSI/ASTM F2288-2003	ISO 5366-1麻醉和呼吸設備的采用.氣管造口術用管.第1部分:成人氣管造口術用管和連接接頭	(Adoption of ISO 5366-1 Anesthetic and Respirator Y Equipment - Tracheostomy Tubes - Part1: Tracheostomy Tubes and Connectors for Use in Adults )
ANSI/ASTM F2289-2003	ISO 5366-3麻醉和呼吸設備的采用.氣管造口術用管.第3部分:兒科氣管造口術用管和連接接頭	(Adoption of ISO 5366-3 Anaesthetic and Respiratory Equipment - Tracheostomy Tubes - Part 3: Paediatric Tracheostomy Tubes )
ANSI/ASTM F2290-2003	醫療氣體用ISO 5359低壓軟管組件的采用	(Adoption of ISO 5359 Low-pressure Hose Assemblies for Use with Medical Gases )
ANSI/ASTM F2307-2003	基于可控內徑的系列10聚氯乙烯封閉式異型重力管和配件的規范’(project *62-02-03)	(Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (project *62-02-03) )
ANSI/ASTM F2324-2003	預清洗噴霧閥的試驗方法	(Test Method for Pre-rinse Spray Valves)
ANSI/ASTM F2330-2004	評價多層聚烯烴管耐氯化熱水氧化性的試驗方法
ANSI/ASTM F2331-2004	測定熱塑性螺紋管和配件材料的螺紋密封件的化學兼容性的試驗方法
ANSI/ASTM F2336-2005	曲棍球運動設施指南
ANSI/ASTM F2361-2004	調整船用低壓(1000V ac或更低的)交流電動機(最高達500馬力)的試驗方法
ANSI/ASTM F2362-2004	溫度監控設備用規范
ANSI/ASTM F2363-2004	美國海岸警衛隊Ii型或Imo Marpol 73/78附錄Iv:海上衛生裝置(流量通過處理)的規范
ANSI/ASTM F2379-2004	電動開啟清洗槽能量性能的試驗方法
ANSI/ASTM F2380-2004	傳送帶式烤爐性能的試驗方法
ANSI/ASTM F2397-2004	軍體運動用防護安全帽的規范
ANSI/ASTM F2397-2005	軍體運動用防護安全帽的規范
ANSI/ASTM F2398-2004	測量棒球棒或軟球拍的慣性矩和沖擊中心的試驗方法
ANSI/ASTM F2400-2004	點拱頂建造用防護帽的規范
ANSI/ASTM F2418-2005	聚丙烯(pp)波紋狀壁的雨水收集容器的規范
ANSI/ASTM F2440-2005	室內墻/部件填充物規范
ANSI/ASTM F381-2005	蹦床的部件、安裝和使用的消費者安全規范
ANSI/ASTM F400-2004	打火機用戶安全規范
ANSI/ASTM F405-2005	聚乙烯(PE)波紋管及管配件規范
ANSI/ASTM F438-2002	套節型氯化聚氯乙烯(CPVC)塑料管配件規范(40號表)	(Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 )
ANSI/ASTM F438-2004	套管型氯化聚氯乙烯(CPVC)塑料管配件規范.表40

[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85]

寬天下翻譯公司版權所有 2008