標準號 |
中文名稱 |
英文名稱 |
| ASTM E 1626-1994 |
ASTM文件中列入政府采購要求標準導則 |
Standard Guide for Including Government Procurement Requirements in ASTM Documents |
| ASTM E 1627-1994 |
食用油和脂肪的感觀評定實用規程 |
Standard Practice for Sensory Evaluation of Edible Oils and Fats |
| ASTM E 1628-1994 |
準備總服務局用包括傳輸和清理數據的材料安全數據單的標準規程 |
Standard Practice for Preparing Material Safety Data Sheets to Include Transportation and Disposal Data for the General Services Administration |
| ASTM E 1629-1994 |
專制的旋流探針電阻測定用標準實用規程 |
Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes |
| ASTM E 1631-1996 |
電子束劑量測量和放射量測定器的校驗用熱量放射量系統標準實用規程 |
Standard Practice for Use of Calorimetric Dosimetry Systems for Electron Beam Dose Measurements and Dosimeter Calibrations |
| ASTM E 1633-2000 |
電子健康記錄用編碼值的標準規范 |
Standard Specification for Coded Values Used in the Electronic Health Record |
| ASTM E 1634-1994 |
濺射焰口深度測量標準導則 |
Standard Guide for Performing Sputter Crater Depth Measurements |
| ASTM E 1635-1995 |
次級離子質譜法(SIMS)成像數據報告標準規范 |
Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS) |
| ASTM E 1636-1994 |
用擴展的邏輯函數分析描述濺射深度分布界面數據的標準規范 |
Standard Practice for Analytically Describing Sputter-Depth-Profile Interface Data by an Extended Logistic Function |
| ASTM E 1637-1998 |
結構固定接縫鋁屋頂鑲板系統的標準規范 |
Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
| ASTM E 1638-1994 |
篩析標準術語 |
Standard Terminology Relating to Sieve Analysis |
| ASTM E 1639-2001 |
臨床實驗室信息管理系統功能要求標準指南 |
Standard Guide for Functional Requirements of Clinical Laboratory Information Management Systems |
| ASTM E 164-1997 |
焊接超聲接觸檢驗 |
Ultrasonic Contact Examination of Weldments |
| ASTM E 1640-1994 |
用動態力學分析測定玻璃轉變溫度的標準試驗方法 |
Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis |
| ASTM E 1641-1998 |
用熱解重量測定法的分解動力學標準試驗方法 |
Standard Test Method for Decomposition Kinetics by Thermogravimetry |
| ASTM E 1642-1994 |
氣相色譜紅外(GC/IR)分析通用技術標準規范 |
Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis |
| ASTM E 1643-1998 |
與混凝土板下土壤或粒狀填料接觸用水蒸汽阻滯劑的安放標準實施規范 |
Standard Practice for Installation of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs |
| ASTM E 1644-1998 |
原子光譜法測定鉛含量用除塵樣品熱板煮解標準規程 |
Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead by Atomic Spectrometry |
| ASTM E 1645-2001 |
用熱板法或微波溶解法連續分析鉛含量用干漆樣品制備的標準實施規程 |
Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1646-1995 |
采用均勻靜態空氣壓差分析外部金屬屋面板系統防水漏性能的標準試驗方法 |
Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference |
| ASTM E 1647-1998 |
射線檢驗中測定襯比靈敏度的標準規程 |
Standard Practice for Determining Contrast Sensitivity in Radioscopy |
| ASTM E 1648-1995 |
用于檢驗焊接中鋁的標準參考射線照片 |
Standard Reference Radiographs for Examination of Aluminum on Welds |
| ASTM E 1649-1994 |
300KeV-25MeV能量輻射加工用電子束設備中劑量測定標準規范 |
Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV |
| ASTM E 165-1995 |
液體滲透檢驗的測試方法 |
Test Method for Liquid Penetrant Examination |
| ASTM E 1650-1997 |
醋酸纖維素劑量系統應用的標準規程 |
Standard Practice for Use of Cellulose Acetate Dosimetry System |
| ASTM E 1651-1994 |
使用30/t積分球幾何尺寸的總發光反射系數標準試驗方法 |
Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry |
| ASTM E 1652-1995 |
金屬屏蔽的鉑電阻溫度表和貴金屬熱電偶制造中使用的氧化鎂,鋁氧化粉和壓扁絕緣物的標準規范 |
Standard Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers and Noble Metal Thermocouples |
| ASTM E 1653-1994 |
光輻射傳送光纖波導規定動態特性標準導則 |
Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides |
| ASTM E 1654-1994 |
用于遠距離拉曼光纖光譜學的光纖和光纜的電離輻射感應光譜變化測量標準導則 |
Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman Fiber- Optic Spectroscopy |
| ASTM E 1655-1997 |
紅外、多變量、定量分析標準規范 |
Standard Practices for Infrared, Multivariate, Quantitative Analysis |
| ASTM E 1656-1994 |
路面狀況自動測量設備分類標準導則 |
Standard Guide for Classification of Automated Pavement Condition Survey Equipment |
| ASTM E 1657-1998 |
液相色譜用可變波長光度探測器試驗的標準規程 |
Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography |
| ASTM E 1658-1996 |
法醫文件表示結論用標準術語 |
Standard Terminology for Expressing Conclusions of Forensic Document |
| ASTM E 1659-2000 |
電鍍鎳鋅合金薄鋼板的化學分析的標準試驗方法 |
Standard Test Methods for Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet |
| ASTM E 1660-1995 |
辦公室工作用辦公設備適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM E 1661-1995 |
辦公設備對于會議和聚會效果的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 1662-1995 |
辦公設備對于視聽環境的適用性標準分類 |
Standard Classification for the Serviceability of an Office Facility for Sound and Visual Environment |
| ASTM E 1663-2001 |
辦公設備對于典型辦公室信息技術的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology |
| ASTM E 1664-1995 |
辦公設備對于布局和建筑物因素的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Layout and Building Factors |
| ASTM E 1665-1995 |
辦公設備對于設備保護的適用性標準分類 |
Standard Classification for the Serviceability of an Office Facility for Facility Protection |
| ASTM E 1666-1995 |
辦公設備對于正常時間和條件以外的工作的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ASTM E 1667-1995 |
辦公設備對于反映公眾和辦公人員形象的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
| ASTM E 1668-1995 |
辦公設備對于吸引和留住職員的舒適性的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
| ASTM E 1669-1995 |
辦公設備對于尋找位置、通路和道路的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding |
| ASTM E 167-1996 |
物質和材料的測角光度測量法 |
Goniophotometry of Objects and Materials |
| ASTM E 1670-1995 |
辦公設備對于操作和維護管理的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
| ASTM E 1671-1995 |
辦公設備對于清潔衛生的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM E 1672-1995 |
計算機層析X射線攝影(CT)系統選擇的標準導則 |
Standard Guide for Computed Tomography (CT) System Selection |
| ASTM E 1673-1996 |
百分比懸浮度標準試驗方法 |
Standard Test Method for Percent Suspensibility |
| ASTM E 1674-1995 |
狗的心臟激活性研究標準試驗方法 |
Standard Test Method for Cardiac Sensitization Study on Dogs |
| ASTM E 1675-1995 |
化學分析用兩相地?zé)崃黧w取樣的標準規范 |
Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis |
| ASTM E 1676-1997 |
用蚯蚓做實驗室土壤毒性試驗的標準指南 |
Standard Guide for Conducting a Laboratory Soil Toxicity Test With Lumbricid Earthworm Eisenia Foetida |
| ASTM E 1677-1995 |
低拱矢屋架建筑物墻壁用空氣阻擋(AR)材料或系統標準規范 |
Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls |
| ASTM E 1678-1996 |
用于火災分析的煙氣毒性測量標準試驗方法 |
Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis |
| ASTM E 1679-1995 |
建筑物或建筑物有關設備適用性要求標準規范 |
Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility |
| ASTM E 168-1999 |
紅外線定量分析的一般技術 |
General Techniques of Infrared Quantitative Analysis |
| ASTM E 1680-1995 |
外部金屬屋面板系統漏氣速率標準試驗方法 |
Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel SystemsE |
| ASTM E 1681-1999 |
恒定載荷下測定金屬材料環境促使裂紋的閾應力強度系數的標準試驗方法 |
Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials Under Constant Load |
| ASTM E 1682-1996 |
目視顯示裝置比色特性模擬的標準導則 |
Standard Guide for Modeling the Colorimetric Properties of a Visual Display Unit |
| ASTM E 1683-1995 |
掃描拉曼光譜儀性能試驗的標準規范 |
Standard Practice for Testing the Performance of Scanning Raman Spectrometers |
| ASTM E 1684-1996 |
小型熱電偶連接器標準規范 |
Standard Specification for Miniature Thermocouple Connectors |
| ASTM E 1685-1995 |
使用超聲脈沖回波技術測量緊固件長度變化的標準規范 |
Standard Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique |
| ASTM E 1686-1996 |
環境噪聲測量及準則選擇的標準導則 |
Standard Guide for Selection of Environmental Noise Measurements and Criteria |
| ASTM E 1687-1998 |
金工流體中原油致癌可能性測定的標準試驗方法 |
Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids |
| ASTM E 1688-1997 |
海底無脊椎動物所致沉積物有關污染物的生物累積測定標準導則 |
Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates |
| ASTM E 1689-1995 |
建立污染場所現場理論模型的標準導則 |
Standard Guide for Developing Conceptual Site Models for Contaminated Sites |
| ASTM E 169-1999 |
紫外線-可見光定量分析的一般技術 |
General Techniques of Ultraviolet-Visible Quantitative Analysis |
| ASTM E 1690-2001 |
測定生物物質中乙醇萃取物的標準試驗方法 |
Standard Test Method for Determination of Ethanol Extractives in Biomass |
| ASTM E 1691-1995 |
分析性化學實驗室的鑒定和評定用標準指南 |
Standard Guide for Evaluation and Assessment of Analytical Chemistry Laboratories |
| ASTM E 1692-1995 |
辦公設備對辦公人員做出的變動的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
| ASTM E 1693-1995 |
辦公設備對辦公人員財產保護的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets |
| ASTM E 1694-1995 |
辦公設備對特殊設備和技術的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
| ASTM E 1695-1995 |
計算機層析X射線攝影(CT)系統性能測量的標準試驗方法 |
Standard Test Method for Measurement of Computed Tomography (CT) System Performance |
| ASTM E 1696-1995 |
使用便攜式反射計現場測量凸起的反射路面標記的標準試驗方法 |
Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer |
| ASTM E 1697-1995 |
感官特征單極性幅度評估的標準試驗方法 |
Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes |
| ASTM E 1698-1995 |
氣相色譜測定中使用的電解電導率探測器(ELCD)的標準規范 |
Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography |
| ASTM E 1699-1995 |
建筑物和建筑系統估價分析標準規范 |
Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
| ASTM E 170-1999 |
有關輻射測量和劑量測定的術語 |
Terminology Relating to Radiation Measurements and Dosimetry |
| ASTM E 1700-1995 |
辦公設備對結構和建筑物包封的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope |
| ASTM E 1701-1995 |
辦公設備對可管理性的適用性標準分類 |
Standard Classification for Serviceability of an Office Facility for Manageability |
| ASTM E 1702-1995 |
輻射處理用ｒ射線設備放射量測定用標準實用規程 |
Standard Practice for Dosimetry in a Gamma Irradiation Facility for Radiation Processing |
| ASTM E 1703/E 1703M-1995 |
使用直尺測量路面車轍深度的標準試驗方法 |
Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge |
| ASTM E 1704-1995 |
規定隔音室聲學性能的標準導則 |
Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures |
| ASTM E 1705-1995 |
生物技術標準術語 |
Standard Terminology Relating to Biotechnology |
| ASTM E 1706-1995 |
淡水中無脊椎動物沉積物有關污染毒性測量的標準試驗方法 |
Standard Test Methods for Measuring the Toxicity of Semiment-Associated Contaminants with Fresh Water Invertebrates |
| ASTM E 1707-1995 |
輻射加工用劑量測定不確定度評定的標準導則 |
Standard Guide for Estimating Uncertainties in Dosimetry for Radiation Processing |
| ASTM E 1708-1995 |
顏色和外觀數據的電子交換標準規范 |
Standard Practice for Electronic Interchange of Color and Appearance Data |
| ASTM E 1709-1995 |
使用便攜式反射計測量反射標志的標準試驗方法 |
Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer |
| ASTM E 171-1994 |
環境氣壓和試驗材料 |
Atmospheres for Conditioning and Testing Materials |
| ASTM E 1710-1997 |
用便攜式反射儀測量CEN規定幾何形狀的路面反射標志材料的標準試驗方法 |
Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer |
| ASTM E 1711-1995 |
魚類毒性試驗過程中特性測量的標準導則 |
Standard Guide for Measurement of Behavior During Fish Toxicity Tests |
| ASTM E 1712-1997 |
臨床實驗室試驗和被分析物名稱表示的標準規范 |
Standard Specification for Representing Clinical Laboratory Test and Analyte Names |
| ASTM E 1713-1995 |
獨立計算機系統之間數字波形數據傳送的標準規范 |
Standard Specification for Transferring Digital Waveform Data Between Independent Computer Systems |
| ASTM E 1714-1995 |
通用衛生保健識別符(UHTD)特性的標準導則 |
Standard Guide for Properties of a Universal Healthcare Identifier (UHID) |
| ASTM E 1715-2001 |
計算機病人記錄系統中掛號、住院、出院和轉院(RADT)功能的目標模塊的標準實施規程 |
Standard Practice for An Object-Oriented Model for Registration, Admitting, Discharge, and Transfer (RADT) Functions in Computer-Based Patient Record Systems |
| ASTM E 1716-1995 |
使用可呼吸碳化硅金屬須的人用的人身保護設備選擇與使用標準規范 |
Standard Guide for Selection and Use of Personal Protective Equipment for Humans Working With Respirable Silicon Carbide Whiskers |
| ASTM E 1717-1995 |
可呼吸碳化硅金屬須的工作場所衛生與安全標準導則 |
Standard Guide for Workplace Health and Safety Training for Respirable Silicon Carbide Whiskers |
| ASTM E 1718-1995 |
碳化硅金屬須工作區域的管理與技術控制標準規范 |
Standard Guide for Administrative and Engineering Controls for Silicon Carbide Whisker Work Areas |
| ASTM E 1719-1997 |
用沸點測定法測定液體蒸氣壓力的標準試驗方法 |
Standard Test Method for Vapor Pressure of Liquids by Ebulliometry |
| ASTM E 172-1990 |
在發射光譜化學分析中激發源的描述和定義 |
Describing and Specifiying the Excitation Source in Emission Spectrochemical Analysis |
| ASTM E 1720-1995 |
在密封容器二氧化碳的生產試驗中測定有機化合物已有的、最基本的生物分解性的標準試驗方法 |
Standard Test Method for Determining Ready, Ultimate, Biodegradability of Organic Chemicals in a Sealed Vessel CO 2 Production Test |
| ASTM E 1721-2001 |
生物物質中不溶酸殘留物測定用標準試驗方法 |
Standard Test Method for Determination of Acid-Insoluble Residue in Biomass |
| ASTM E 1722-1995 |
材料及化學性能數據代碼表的登錄與維護標準規范 |
Standard Practice for Registering and Maintaining Materials and Chemical Property Data Code Lists |
| ASTM E 1723-1995 |
用于塑料試驗數據計算機管理的數據記錄推薦格式標準規范 |
Standard Guide for Recommended Formats for Data Records Used in Computerization of Test Data for Plastics |
| ASTM E 1724-1995 |
金屬及金屬相關參考物質認證試驗標準指南 |
Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials |
| ASTM E 1725-1995 |
電氣系統件耐火阻擋層系統耐火試驗的標準試驗方法 |
Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components |
| ASTM E 1726-2001 |
用熱板溶解法連續分析鉛含量用土壤樣品制備的標準實施規程 |
Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1727-1995 |
用原子光譜分析法對鉛測定用土壤樣品的現場采集用標準實用規程 |
Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 1728-1995 |
用原子光譜法技術測量鉛含量的掃描取樣法現場收集積塵樣品的標準試驗方法 |
Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 1729-1995 |
用原子光譜分析法對鉛測定用干涂料樣品的現場采集用標準實用規程 |
Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 173-1993 |
金屬化學分析方法實施實驗室間共同研究 |
Conducting Interlaboratory Studies of Methods for Chemical Analysis of Metals |
| ASTM E 1730-1999 |
保護疊層板芯板用硬質泡沫塑料標準規范 |
Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores |
| ASTM E 1731M-1995 |
清洗房間手套上的非揮發性殘留物重力測定用標準試驗方法 |
Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves (Metric) |
| ASTM E 1732-1995 |
法醫學標準術語 |
Standard Terminology Relating to Forensic Science |
| ASTM E 1733-1995 |
實驗室試驗照明標準指南 |
Standard Guide for Use of Lighting in Laboratory Testing |
| ASTM E 1734-1995 |
鑄件的放射檢測用標準實用規程 |
Standard Practice for Radioscopic Examination of Castings |
| ASTM E 1735-1995 |
曝光于4至25Mv的X射線放射的工業放射照相膠片的相對影象質量的測定方法 |
Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MV |
| ASTM E 1736-1995 |
纖維繞制壓力容器的超聲波鑒定用標準實用規程 |
Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels |
| ASTM E 1737-1996 |
斷裂韌性的J-綜合特性的標準測試方法 |
Standard Test Method for J-Integral Characterization of Fracture Toughness |
| ASTM E 1738-1996 |
由認可團體編制認可實驗室名錄的標準指南 |
Standard Guide for Development of a Directory of Accredited Laboratories by an Accrediting Body |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com