ASTM——美國材料與實驗協會標準翻譯目錄查詢

咨詢熱線：010-6973-5438

標準號	中文名稱	英文名稱
ASTM D 3295-1997	聚四氟乙烯管	PTFE Tubing
ASTM D 3296-1998	(FEP)氟化乙丙烯-碳氟化合物管	FEP-Fluorocarbon Tube
ASTM D 3299-2000	纖維纏繞的玻璃纖維增強熱固樹脂耐腐蝕容器的標準規范	Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D 330-1993	2-丁氧基乙醇	2-Butoxyethanol
ASTM D 3300-1994	在脈沖條件下石油成因的絕緣油的電介質擊穿電壓的試驗方法	Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
ASTM D 3301-2000	永久記錄的貯存用折疊式文件夾的標準規范	Standard Specification for File Folders for Storage of Permanent Records
ASTM D 3302-2000	煤總濕度的標準試驗方法	Standard Test Method for Total Moisture in Coal
ASTM D 3305-1994	從變壓器中抽取氣體樣品	Sampling Gas from a Transformer
ASTM D 3306-2001	汽車及輕型設備用乙二醇基發動機冷卻劑的標準規范	Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
ASTM D 3307-1993	全氟烷氧基(PFA)-碳氟化合物模塑及擠壓材料	PFA-Fluorocarbon Molding and Extrusion Materials
ASTM D 3308-1997	聚四氟乙烯樹脂薄片帶	PTFE Resin Skived Tape
ASTM D 3309-1996	聚丁烯(PB)塑料熱水及冷水分布系統	Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
ASTM D 331-1995	2-乙氧基乙醇	2-Ethoxyethanol
ASTM D 3310-2000	測定粘結材料耐腐蝕性的標準試驗方法	Standard Test Method for Determining Corrosivity of Adhesive Materials
ASTM D 3311-1994	排水、廢水及通風(DWV)塑料管配件圖樣	Drain, Waste and Vent (DWV) Plastic Fittings Patterns
ASTM D 3312-1996	無溶劑清漆中活性單體百分比的試驗方法	Test Method for Percent Reactive Monomer in Solventless Varnishes
ASTM D 3313-1999	炭黑的試驗方法.單個炭黑片抗碎強度	Test Method Carbon Black - Individual Pellet Crush Strength
ASTM D 3314-1992	橡膠試驗方法.丁苯橡膠及苯乙烯增強的膠乳中聚苯乙烯塊的化學分析	Test Method for Rubber - Chemical Analysis for Polystyrene Blocks in SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM D 3316-1996	全氯乙烯對銅的穩定性的試驗方法	Test Method for Stability of Perchloroethylene with Copper
ASTM D 3319-2000	用英式輪加速拋光集料的標準實施規程	Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
ASTM D 332-1987	白色顏料著色力的試驗方法	Test Method for Relative Tinting Strength of White Pigments by Visual Observation
ASTM D 3320-2000	乳化煤焦油瀝青的標準規范(礦物膠體型)	Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
ASTM D 3321-1994	現場試驗測定含水發動機冷卻劑凝固點用折射計的使用規程	Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
ASTM D 3322-1982	預成型金屬表面的底漆及二道底漆的試驗	Testing Primers and Primer Surfacers over Preformed Metal
ASTM D 3324-2001	炭黑的標準實施規程.用ASTM標準炭黑改進檢驗再生性	Standard Practice for Carbon Black-Improving Test Reproducibility Using ASTM Reference Blacks
ASTM D 3324a-2001	炭黑標準規范.用ASTM標準炭黑改進檢驗還原性	Standard Practice for Carbon Black-Improving Test Reproducibility Using ASTM Reference Blacks
ASTM D 3325-1990	水中油樣品的保存	Preservation of Waterborne Oil Samples
ASTM D 3326-1990	水中油鑒別用樣品的制備	Preparation of Samples for Identification of Waterborne Oils
ASTM D 3328-2000	氣相色譜法比較水中石油潤滑油的標準試驗方法	Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
ASTM D 3329-1999	氣相色譜法測定甲基異丁基酮純度的方法	Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography
ASTM D 333-2001	透明漆和著色漆的標準指南	Standard Guide for Clear and Pigmented Lacquers
ASTM D 3330-1996	在180度角的條件下壓合帶的皮層剝離粘著力的試驗方法	Test Methods for Peel Adhesion of Pressure-Sensitive Tape at 180 Degree Angle
ASTM D 3330M-1996	在180度角的條件下壓合帶的皮層剝離粘著力的試驗方法(米制的)	Test Methods for Peel Adhesion of Pressure-Sensitive Tape at 180 Degree Angle (Metric)
ASTM D 3332-1999	用沖擊機測試產品的機械沖擊脆性的試驗方法	Test Methods of Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM D 3333-1995	試驗用人造短纖維、次等化學纖維或亞麻短纖維的取樣	Sampling Man-Made Staple Fibers, Silver or Tow for Testing
ASTM D 3335-1985	原子吸收光譜法測定涂料中低濃度鉛、鎘和鈷的試驗方法	Test Method for Low Concentrations of Lead, Cadmium and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D 3336-1997	升溫下滾珠軸承中潤滑脂使用壽命的試驗方法	Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures
ASTM D 3337-1991	小型滾珠軸承中潤滑脂的使用壽命和轉矩的測定方法	Test Method for Determining Life and Torque of Lubricating Greases in Small Ball Bearings
ASTM D 3338-1995	航空燃料燃燒的有效熱的測定方法	Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
ASTM D 3339-1995	半微量顏色指示劑滴定法測定石油產品酸值的試驗方法	Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration
ASTM D 3340-1998	用火焰光度計策動潤滑油脂中鋰和鈉的試驗方法	Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer
ASTM D 3341-1991	汽油中鉛含量的試驗方法.氯化碘法	Test Method for Lead in Gasoline - Iodine Monochloride Method
ASTM D 3342-1990	新(未經使用的)輥壓油在水中分散穩定性的試驗方法	Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water
ASTM D 3343-1995	航空燃料氫含量的測定方法	Test Method for Estimation of Hydrogen Content of Aviation Fuels
ASTM D 3344-1990	波紋面的紙板的總載蠟量的試驗方法	Test Method for Total Wax Content of Corrugated Paperboard
ASTM D 3345-1974	木材及其他纖維素材料防白蟻破壞的實驗室評定方法	Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
ASTM D 3346-1990	橡膠特性的試驗方法.用莫氏粘度計測定SBR(丁苯橡膠)的可加工性	Test Methods for Rubber Property - Processability of SBR (Styrene-Butadiene Rubber) with the Mooney Viscometer
ASTM D 3347-1994	包覆型電熱原件用電氣級氧化鎂的流動速率及堆積密度的測試方法	Test Method for Flow Rate and Tap Density of Electrical Grade Magnesium Oxide for Use in Sheathed-Type Electric Heating Elements
ASTM D 3348-1998	測試無鉛汽油中痕量鉛的快速現場試驗方法(比色法)	Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)
ASTM D 3349-1999	用碳黑著色的乙烯聚合材料吸收系數的試驗方法	Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black
ASTM D 3350-2002	聚乙烯塑料管及其配件用材料的標準規范	Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
ASTM D 3351-1993	塑料薄膜膠凝數值的試驗方法	Test Method for Gel Count of Plastic Film
ASTM D 3352-1994	微咸水、海水和鹽水中鍶離子含量的試驗方法	Test Method for Strontium Ion in Brackish Water, Seawater and Brines
ASTM D 3353-1998	纖維絕緣的磁性金屬絲的試驗方法	Test Methods for Fibrous-Insulated Magnet Wire
ASTM D 3354-1996	用平行板法測量塑料薄膜的粘附負荷的試驗方法	Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
ASTM D 3359-1997	膠帶試驗測定粘合性的試驗方法	Test Methods for Measuring Adhesion by Tape Test
ASTM D 3360-1996	流體比重計法測定普通白色體質顏料粒度分布的試驗方法	Test Method for Particle Size Distribution by Hydrometer of the Common White Extender Pigments
ASTM D 3361-2001	用非濾光碳弧型裝置測定涂料和有關涂層的標準實施規程	Standard Practice for Unfiltered Open-Flame Carbon-Arc Type of Paint and Related Coatings
ASTM D 3362-1993	氣相色譜法測定丙烯酸酯純度的試驗方法	Test Method for Purity of Acrylate Esters by Gas Chromatography
ASTM D 3363-2000	鉛筆試驗測定漆膜硬度的標準試驗方法	Standard Test Method for Film Hardness by Pencil Test
ASTM D 3364-1999	聚氯乙烯和流變的不穩定熱塑性材料流動速率的測試試驗方法	Test Method for Flow Rates for Poly (Vinyl Chloride) and Rheologically Unstable Thermoplastics
ASTM D 3366-1995	熔融狀態下和加熱后順酐和苯酐顏色的試驗方法(鉑-鈷比例)	Test Method for Color of Maleic Anhydride and Phthalic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
ASTM D 3367-1998	在離心力作用下聚氯乙烯樹脂的增塑劑吸收作用的試驗方法	Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
ASTM D 3368-1999	氟化乙丙烯(FEP)-碳氟化合物樹脂薄板及薄膜的標準規范	Standard Specification for FEP-Fluorocarbon Resin Sheet and Film
ASTM D 3369-1996	四氟乙烯-碳氟化合物樹脂澆鑄薄膜	Polytetrafluoroethylene (PTFE) Resin Cast Film
ASTM D 3370-1995	水的抽樣	Sampling Water
ASTM D 3371-1995	用氣體-液體色層分離法測定溶液中腈含量的試驗方法	Test Method for Nitriles in Aqueous Solution by Gas-Liquid Chromatography
ASTM D 3372-1992	水中鉬含量的試驗方法	Test Method for Molybdenum in Water
ASTM D 3373-1993	水中釩含量的試驗方法	Test Method for Vanadium in Water
ASTM D 3374-1999	乙烯涂覆的玻璃絲	Vinyl-Coated Glass Yarns
ASTM D 3375-1995	混合粒子層中離子交換材料的柱容量的試驗方法	Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials
ASTM D 3376-1988	制造電絕緣材料用紙漿的取樣及試驗的方法	Test Methods of Sampling and Testing Pulps to Be Used in the Manufacture of Electrical Insulation
ASTM D 3377-1996	無溶劑清漆重量損失的試驗方法	Test Method for Weight Loss of Solventless Varnishes
ASTM D 3379-1975	高彈性模數單絲材料的抗拉強度和揚氏模量的試驗方法	Test Method for Tensile Strength and Youngs Modulus for High-Modulus Single-Filament Materials
ASTM D 3380-1990	塑料基微波電路底板的相對介電常數(介電常數)及損耗因數的試驗方法	Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates
ASTM D 3381-1992	路面建筑用粘度級瀝青膠結劑	Viscosity-Graded Asphalt Cement for Use in Pavement Construction
ASTM D 3382-1995	使用電橋技術測量局部放電(電暈)能量及總電荷轉移量的方法	Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
ASTM D 3385-1994	用雙環滲透儀現場測定土壤滲透率的試驗方法	Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometers
ASTM D 3386-1994	電絕緣材料的線性熱膨脹系數的試驗方法	Test Method for Coefficient of Linear Thermal Expansion of Electrical Insulating Materials
ASTM D 3387-1983	用美國工程兵團回轉試驗機測定瀝青混合料的壓實應變特性及剪切應變特性的試驗方法	Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
ASTM D 3389-1994	涂層織物的耐磨性的試驗方法(旋轉臺式雙頭磨蝕機)	Test Method Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader)
ASTM D 3393-1991	涂層織物.耐水性	Coated Fabrics - Waterproofness
ASTM D 3394-1994	電絕緣板的抽樣和試驗	Sampling and Testing Electrical Insulating Board
ASTM D 3395-1999	橡膠變質的試驗方法.小室中動態臭氧龜裂的試驗	Test Methods for Rubber Deterioration - Dynamic Ozone Cracking in a Chamber
ASTM D 3398-2000	集料顆粒形狀和構造指數的標準試驗方法	Standard Test Method for Index of Aggregate Particle Shape and Texture
ASTM D 3399-1981	通用合成洗滌液	General-Purpose Synthetic Detergent Liquid
ASTM D 3400-1985	液態硅酸鈉	Liquid Sodium Silicates
ASTM D 3401-1997	鹵化有機溶劑及其摻和物中的水分的試驗方法	Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
ASTM D 3402-1993	焦炭用滾凈筒試驗方法	Test Method for Tumbler Test for Coke
ASTM D 3403-1997	橡膠的試驗方法.IR(異戊橡膠)的評定	Test Methods for Rubber - Evaluation of IR (Isoprene Rubber)
ASTM D 3404-1991	拉力計測定滲流區的矩陣勢能	Measuring Matric Potential in the Vadose Zone Using Tensiometers
ASTM D 3405-1997	混凝土及瀝青路面用熱灌的接縫密封膠	Joint Sealants, Hot-Poured for Concrete and Asphalt Pavements
ASTM D 3406-1995	硅酸鹽水泥混凝土路面用彈性體型熱處理的接縫密封膠	Joint Sealant, Hot-Applied, Elastomeric-Type for Portland Cement Concrete Pavements
ASTM D 3407-1978	混凝土及瀝青路面用熱灌接縫密封膠的試驗	Testing Joint Sealants, Hot-Poured for Concrete and Asphalt Pavements
ASTM D 3409-1993	瀝青屋頂膠粘劑對潮濕表面、濕表面和水下表面粘著性的試驗方法	Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet or Underwater Surfaces
ASTM D 341-1993	液體石油產品粘度-溫度關系曲線圖	Viscosity-Temperature Charts for Liquid Petroleum Products
ASTM D 3410/D 3410M-1995	單向的或交叉的纖維樹脂混合料的壓縮特性的試驗方法	Test Method for Compressive Properties of Unidirectional or Crossply Fiber - Resin Composites
ASTM D 3412-1995	紗與紗之間摩擦系數的試驗方法	Test Method for Coefficient of Friction, Yarn to Yarn
ASTM D 3414-1998	水生石油潤滑油的紅外線光譜比較方法	Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
ASTM D 3415-1998	水中油的識別	Identification of Waterborne Oils
ASTM D 3417-1999	通過熱分析測定聚合物熔化及結晶熱的試驗方法	Test Method for Heats of Fusion and Crystallization of Polymers by Thermal Analysis
ASTM D 3418-1999	通過熱分析測定聚合物熱變溫度的試驗方法	Test Method for Transition Temperatures of Polymers by Thermal Analysis
ASTM D 3419-1993	由熱固性化合物制的軸向螺桿柱塞并用式鑄模試樣	In-Line Screw-Injection Molding Test Specimens from Thermosetting Compounds
ASTM D 3420-1995	塑料薄膜的耐擺錘式?jīng)_擊的試驗方法	Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D 3423-1984	乳化的煤焦油瀝青(礦物膠質型)的應用	Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
ASTM D 3424-2001	印刷品的光照牢度和耐氣候性評定的標準試驗方法	Standard Test Methods for Evaluating the Lightfastness and Weatherability of Printed Matter
ASTM D 3426-1997	用脈沖波法測定固體電絕緣材料的電介質擊穿電壓及抗電強度的試驗方法	Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
ASTM D 3427-1999	石油的放氣特性試驗方法	Test Method for Air Release Properties of Petroleum Oils
ASTM D 3429-1993	低沸點液體中固定氣體溶解度的試驗方法	Test Method for Solubility of Fixed Gases in Low-Boiling Liquids
ASTM D 3430-1995	液態水基透明地板拋光劑的透明度及泛黃度的試驗方法	Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
ASTM D 3432-1989	氣相色譜法測定氨基甲酸乙酯預聚物和涂料溶液中的游離甲苯二異氰酸酯的試驗方法	Test Method for Unreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutions by Gas Chromatography
ASTM D 3433-1999	粘結接頭中膠粘劑的斷裂強度試驗	Fracture Strength in Cleavage of Adhesives in Bonded Joints
ASTM D 3434-2000	室外潮濕條件用木材膠粘劑的多周期加速老化試驗(自動沸騰試驗)的標準試驗方法	Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM D 3436-1999	苯胺的抽樣和搬運	Sampling and Handling Aniline
ASTM D 3437-1999	液體環烴產物的抽樣和搬運	Sampling and Handling Liquid Cyclic Products
ASTM D 3438-1999	萘,順丁烯二酐,苯三甲酸酐的抽樣和處置方法	Sampling and Handling Naphthalene, Maleic Anhydride and Phthalic Anhydride
ASTM D 344-1997	用擦試外規評定法對涂料相對遮蓋力的測試方法	Test Method for Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
ASTM D 3440-1982	水乳化地板擦亮劑制備規格	Preparing Specifications for Water-Emulsion Floor Polishes
ASTM D 3441-1998	土壤中深的,類似靜止的,錐貫入試驗及磨擦錐輪貫入的試驗方法	Test Method for Deep, Quasi-Static, Cone and Friction-Cone Penetration Tests of Soil
ASTM D 3442-1991	大氣中氚氣含量的試驗方法	Test Method for Gaseous Tritium Content of the Atmosphere

[1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] [82] [83] [84] [85]

寬天下翻譯公司版權所有 2008