標準號 |
中文名稱 |
英文名稱 |
| ASTM D 6159-1997 |
用氣相色譜測定乙烯碳氫化合物的標準試驗方法 |
Standard Test Method for Determination of Hydrocarbon rities in Ethylene by Gas Chromatography |
| ASTM D 6160-1998 |
氣相色譜法測定廢料中多氯代聯苯的標準試驗方法 |
Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography |
| ASTM D 6161-1998 |
用于交叉液流微孔過濾,超聲過濾,毫微過濾和反滲透膜處理的標準術語 |
Standard Terminology Used for Crossflow Microfiltration, Ultrafiltration, Nanofiltration, and Reverse Osmosis Membrane Processes |
| ASTM D 6162-2000 |
用聚合物和玻璃纖維增強結合的苯乙烯丁二烯苯乙烯(SBS)改良的瀝青層材料的標準規范 |
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 6163-2000 |
玻璃纖維增強的苯乙烯丁二烯苯乙烯(SBS)改良瀝青層材料的標準規范 |
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements |
| ASTM D 6164-2000 |
聚合物增強的苯乙烯丁二烯苯乙烯(SBS)改良瀝青層材料的標準規范 |
Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| ASTM D 6165-1997 |
涂料,油墨和相關材料的氣味識別,檢測,比較的標準指南 |
Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials |
| ASTM D 6166-1997 |
松脂制品和相關產品顏色的標準試驗方法(加德納儀器測定顏色) |
Standard Test Method for Color of Naval Stores and Related products (Instrumental Determination of Gardner Color) |
| ASTM D 6167-1997 |
地理測井記錄用管道鉆孔的標準指南:機械卡鉗 |
Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper |
| ASTM D 6168-1997 |
確定被選為描述土壤,巖石和其所含液體的信息的現場收集所要求的數據素的最小設置選擇的標準指南 |
Standard Guide for Selection of the Minimum Set of Data Elements Required to Identify Locations Chosen for the Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids |
| ASTM D 6169-1998 |
環境調查用鉆探取樣用具的土壤和巖石取樣裝置選擇的標準指南 |
Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations |
| ASTM D 617-1984 |
酚醛層壓薄板沖孔性能的試驗方法 |
Test Method for Punching Quality of Phenolic Laminated Sheets |
| ASTM D 6171-1997 |
地下水模型規程文件化的標準指南 |
Standard Guide for Documenting a Ground-Water Modeling Code |
| ASTM D 6172-1998 |
用斷面或用由攝影測量學過程直接操作者應用產生的交叉部分測定散裝材料容積的標準試驗方法 |
Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures |
| ASTM D 6173-1997 |
用電位滴定法對各種陰離子表面活性劑活性的標準試驗方法 |
Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration |
| ASTM D 6174-1997 |
用電位鉛滴定法對表面活性劑中無機硫酸鹽的標準試驗方法 |
Standard Test Method for Inorganic Sulfate in Surfactants by Potentiometric Lead Titration |
| ASTM D 6175-1998 |
擠壓催化劑顆粒輻射狀壓碎強度的標準試驗方法 |
Standard Test Method for Radial Crush Strength of Extruded Catalyst Particles |
| ASTM D 6176M-1997 |
用電阻溫度傳感器(米制)測量表面大氣溫度的標準操作規程 |
Standard Practice for Measuring Surface Atmospheric Temperature with Electrical Resistance Temperature Sensors (Metric) |
| ASTM D 6177-1997 |
由基床排放的揮發性有機化學藥品的排放層面測定的標準操作規程 |
Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM D 6178-1997 |
短期吸入物暴露于由基床排放的揮發性有機化學藥品的估計的標準操作規程 |
Standard Practice for Estimation of Short-Term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets |
| ASTM D 6179-1997 |
應用負載和大型船運箱和裝貨箱的粗處理的標準試驗方法 |
Standard Test Methods for Rough Handling of Utlized Loads and Large Shipping Cases and Crates |
| ASTM D 618-1999 |
試驗用塑料及電絕緣材料的調理 |
Conditioning Plastics and Electrical Insulating Materials for Testing |
| ASTM D 6180-1998 |
在電氣放電的情況下原油來源的絕緣油的穩定性的標準試驗方法 |
Standard Test Method for Stability of Insulating Oils of Petroleum Origin Under Electrical Discharge |
| ASTM D 6181-1997 |
原油來源的礦物絕緣油中渾濁度測量的標準試驗方法 |
Standard Test Method for Measurement of Turbidity in Mineral Insulating Oil of Petroleum Origin |
| ASTM D 6184-1998 |
從潤滑脂中分離油的標準試驗方法(錐形篩方法) |
Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method) |
| ASTM D 6185-1997 |
評價潤滑脂的二混合物相容性的標準規程 |
Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases |
| ASTM D 6186-1998 |
利用壓差掃描量熱法(PDSC)測試潤滑油的氧化感應時間的標準試驗方法 |
Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC) |
| ASTM D 6187-1997 |
帶有氮激光感應熒光的石油污染位點的錐形透度計技術特性的標準操作規程 |
Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence |
| ASTM D 6188-1997 |
通過銅氨落球對纖維素黏度的標準試驗方法 |
Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall |
| ASTM D 6189-1997 |
有機涂層的化學去除劑的效果評價的標準操作規程 |
Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings |
| ASTM D 619-1999 |
電絕緣用硫化纖維的標準試驗方法 |
Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation |
| ASTM D 6190-1997 |
通過土壤埋葬的試驗室模仿對管道涂層的陰極非結合的標準試驗方法 |
Standard Test Method for Cathodic Disbonding of Pipeline Coatings by Laboratory Simulation of Soil Burial |
| ASTM D 6191-1997 |
由可水減的空氣干燥涂層離析的甲醛的測量的標準試驗方法 |
Standard Test Method for Measurement of evolved Formaldehyde from Water Reducible Air-Dry Coatings |
| ASTM D 6192-1998 |
女孩人體測量的標準表,尺碼為7-16 |
Standard Tables of Body Measurements for Girls, Sizes 7 to 16 |
| ASTM D 6193-1997 |
針角和縫合的標準操作規程 |
Standard Practice for Stitches and Seams |
| ASTM D 6194-1997 |
材料輝光電線點燃的標準試驗方法 |
Standard Test Method for Glow-Wire Ignition of Materials |
| ASTM D 6195-1997 |
環形黏著力的標準試驗方法 |
Standard Test Methods for Loop Tack |
| ASTM D 6198-1998 |
運輸包裝設計的標準指南 |
Standard Guide for Transport Packaging Design |
| ASTM D 6199-1997 |
容器和貨板木頭部分的質量的標準操作規程 |
Standard Practice for Quality of Wood Members of Contains and Pallets |
| ASTM D 6200-2001 |
通過冷卻曲線分析測定淬火油冷卻特性的標準試驗方法 |
Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis |
| ASTM D 6201-2001 |
進油閥用火花點燃式發動機無鉛燃料沉積物形成的功率計評定標準試驗方法 |
Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation |
| ASTM D 6202-2001 |
在系列VIA火花點火發動機客車和輕型卡車的燃料經濟學中汽車發動機油的標準試驗方法 |
Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine |
| ASTM D 6203-1997 |
道路潤滑劑的熱穩定性的標準試驗方法 |
Standard Test Method for Thermal Stability of Way Lubricants |
| ASTM D 6204-2001 |
橡膠的標準試驗方法.用非轉動剪切流變儀測量未硫化橡膠的流變性能 |
Standard Test Method for Rubber - Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers |
| ASTM D 6205-1998 |
摩擦機的James靜態系數校正的標準操作規程 |
Standard Practice for Calibration of the James Static Coefficient of Friction Machine |
| ASTM D 6206-1997 |
涂層膜取樣的標準操作規程 |
Standard Practice for Sampling of Coating Films |
| ASTM D 6207-1997 |
溫度和濕度變化時織物尺寸穩定性的標準試驗方法 |
Standard Test Method for Dimensional Stability of Fabrics to Changes in Humidity and Temperature |
| ASTM D 6208-1997 |
通過電流靜態測量對鋁及其合金折回潛力測定的標準試驗方法 |
Standard Test Method for repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement |
| ASTM D 6209-1998 |
環境空氣中氣態和顆粒多環芳香烴測定的標準試驗方法(用氣相色譜/質譜分析的背面吸著劑的濾膜的收集) |
Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis) |
| ASTM D 6210-1998 |
重載發動機全調配乙二醇基質的發動機制冷劑的標準規范 |
Standard Specification for Fully-Formulated Ethylene-Glycol-Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 6211-1998 |
重載發動機全調配丙二醇基質的發動機制冷劑的標準規范 |
Standard Specification for Fully-Formulated Propylene-Glycol-Base Engine Coolant for Heavy-Duty Engines |
| ASTM D 6212-1999 |
通過氫解分析和比率量熱術對芳香化合物中總硫的標準試驗方法 |
Standard Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Calorimetry |
| ASTM D 6213-1997 |
液體地理坐標耐化學藥品評價的標準操作規程 |
Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids |
| ASTM D 6214-1998 |
化學熔化方法測定連接土工薄膜地縫完整性的標準試驗方法 |
Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods |
| ASTM D 6215-1998 |
金屬表面油性土壤移去的標準指南 |
Standard Guide for Removal of Oily Soils from Metal Surfaces |
| ASTM D 6216-1998 |
證明與設計和性能規范相符合的不透明檢測儀生產商的標準操作規程 |
Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications |
| ASTM D 6217-1998 |
試驗室過濾法測試中間餾出燃料中顆粒雜質的標準試驗方法 |
Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration |
| ASTM D 622-1999 |
汽車空氣制動和真空制動用橡膠軟管的試驗方法 |
Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System |
| ASTM D 6221-2000 |
屋頂和防水用增強瀝青溢塑片的標準規范 |
Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing |
| ASTM D 6222-2000 |
聚酯增強的無規立構聚丙烯(APP)改良瀝青片材料的標準規范 |
Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements |
| ASTM D 6223-2000 |
聚酯和玻璃纖維增強相結合的無規立構聚丙烯(APP)改良瀝青片材料的標準規范 |
Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements |
| ASTM D 6224-1998 |
附屬動力工廠設備用潤滑油運行中檢測的標準操作規程 |
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ASTM D 6225-1998 |
礦物表面屋頂的顆粒覆蓋的標準試驗方法 |
Standard Test Method for Granule Cover of Mineral Surfaced Roofing |
| ASTM D 6226-1998 |
硬質微孔塑料的開放孔室含量的標準試驗方法 |
Standard Test Method for Open Cell Content of Rigid Cellular Plastics |
| ASTM D 6227-1999 |
82級無鉛航空汽油的標準規范 |
Standard Specification for Grade 82 Unleaded Aviation Gasoline |
| ASTM D 6228-1998 |
用氣相色譜和火焰光度檢測對天然氣和氣態燃料中含硫化合物測定的標準試驗方法 |
Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection |
| ASTM D 6229-2001 |
用毛細管氣相色譜測定烴類溶劑中痕量苯的標準試驗方法 |
Standard Test Method for Trace Benezene in Hydrocarbon Solvents by Capillary Gas Chromatography |
| ASTM D 623-1999 |
橡膠性能試驗方法.壓縮中熱的產生和彎曲疲勞試驗 |
Test Methods for Rubber Property - Heat Generation and Flexing Fatigue in Compression |
| ASTM D 6230-1998 |
使用探針型傾斜儀檢測地面運動的標準試驗方法 |
Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers |
| ASTM D 6232-2000 |
廢棄物和污染介質數據收集活動用取樣設備選擇的標準指南 |
Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities |
| ASTM D 6233-1998 |
環境廢物管理活動的數據評價的標準指南 |
Standard Guide for Data Assessment for Environmental Waste Management Activities |
| ASTM D 6234-1998 |
通過合成沉淀漓濾過程對采礦廢物的搖混提取的標準試驗方法 |
Standard Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure |
| ASTM D 6235-1998 |
有害廢物污染處滲流和地下水污染的考查地點特性的標準操作規程 |
Standard Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites |
| ASTM D 6236-1998 |
取芯和測井基質或石灰穩定土壤的標準指南 |
Standard Guide for Coring and Logging Cement- or Lime-Stabilized Soil |
| ASTM D 6237-1998 |
噴涂檢查員的的標準指南(混凝土和磚石基質) |
Standard Guide for Painting Inspectors (Concrete and Masonry Substrates) |
| ASTM D 6238-1998 |
水中總氧要求的標準試驗方法 |
Standard Test Method for Total Oxygen Demand in Water |
| ASTM D 6239-1998 |
通過高溶解性α-液體閃爍度譜儀對飲用水中鈾的標準試驗方法 |
Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry |
| ASTM D 624-2000 |
常規硫化橡膠和熱塑性彈性體抗撕裂強度的標準試驗方法 |
Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers |
| ASTM D 6240-1998 |
尺寸為34至60的男性身體測量的標準表 |
Standard Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular |
| ASTM D 6241-1999 |
用50mm探針對土工織物和土工織物相關產品的靜態穿透強度的標準試驗方法 |
Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe |
| ASTM D 6242-1998 |
非織造織物的單位面積質量的標準試驗方法 |
Standard Test Method for Mass Unit Area of Nonwoven Fabrics |
| ASTM D 6243-1998 |
通過直接剪切方法對土工合成粘土襯里的內部和界面剪切抗性測定的標準試驗方法 |
Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method |
| ASTM D 6244-1998 |
土工化合的鋪路鑲條管的垂直壓縮的標準試驗方法 |
Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains |
| ASTM D 6245-1998 |
使用室內二氧化碳濃度評價室內空氣質量和通風的標準指南 |
Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation |
| ASTM D 6246-1998 |
評價擴散取樣器的性能的標準操作規程 |
Standard Practice for Evaluating the Performance of Diffusive Samplers |
| ASTM D 6247-1998 |
用X射線熒光度譜術對聚烯烴內素含量分析的標準試驗方法 |
Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry |
| ASTM D 6248-1998 |
用紅外線分光光度法對乙烯基和橫相不飽和性的標準試驗方法 |
Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry |
| ASTM D 6249-1998 |
水處理工廠殘余物堿穩定性的標準指南 |
Standard Guide for Aklaline Stabilization of Wastewater Treatment Plant Residuals |
| ASTM D 6250-1998 |
在廢物管理決策中主濃度靜態試驗用決策點和可信限度偏差的標準操作規程 |
Standard Practice for Derivation of Decision Point and Confidence Limit for Statistical Testing of Mean Concentration in Waste Management Decisions |
| ASTM D 6251/D 6251M-2001 |
木加固鐵條的船運箱的標準規范 |
Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
| ASTM D 6252/D 6252M-1998 |
在90&*176角度上對壓敏標簽備料剝離粘性的標準試驗方法 |
Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90&*176 Angle |
| ASTM D 6253-1998 |
貨盤標記的標準操作規程 |
Standard Practice for Marking of Pallets |
| ASTM D 6254/D 6254M-1998 |
金屬線螺旋釘的貨盤型木箱的標準規范 |
Standard Specification for Wirebound Pallet-Type Wood Boxes |
| ASTM D 6255/D 6255M-1998 |
鋼或鋁合金開槽角度裝貨箱的標準規范 |
Standard Specification for Steel or Aluminum Slotted Angle Crates |
| ASTM D 6256/D 6256M-1998 |
沿滑道拖運的,承載負荷情況下和木條加固的船運箱的標準規范 |
Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases |
| ASTM D 6258-1998 |
柴油燃料中溶劑紅164染料濃度測定的標準試驗方法 |
Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels |
| ASTM D 6259-1998 |
定量的匯合限制測定的標準操作規程 |
Standard Practice for Determination of a Pooled Limit of Quantitation |
| ASTM D 6260-1998 |
尼龍材料(PA)中碳黑重量計測定的標準試驗方法 |
Standard Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA) |
| ASTM D 6261-1998 |
由熱塑聚酯(TPES)制造的擠壓和壓縮鑄�；A型材的標準規范 |
Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES) |
| ASTM D 6262-1998 |
聚芳基乙醚酮(PAEK)擠壓的,壓縮鑄模的和注模的基礎型材的標準規范 |
Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK) |
| ASTM D 6263-1998 |
由硬質聚氯乙烯(PVC)和氯化聚氯乙烯(CPVC)制造的擠壓的棍材和棒材的標準規范 |
Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) |
| ASTM D 6264-1998 |
與一集中的擬靜態壓痕力復合的纖維增強聚合物基質的耐破壞性測量的標準試驗方法 |
Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force |
| ASTM D 6265-1998 |
用擠壓機濾膜試驗對聚合物內污染物分離的標準操作規程 |
Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test |
| ASTM D 6266-2000 |
在VOC控制裝置內由可移去的水載汽車涂層中釋放的揮發性有機物(VOC)的總量測定的標準試驗方法 |
Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement) |
| ASTM D 6267-1998 |
提高溫度情況下烴類樹脂的表觀粘度的試驗方法 |
Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures |
| ASTM D 6268-1998 |
HFC-125五氟乙烷的裝卸、運輸和存儲的標準實施規范 |
Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5) |
| ASTM D 6269-1998 |
P-二甲苯凝固點的試驗方法 |
Test Method for Solidification of Point of p-Xylene |
| ASTM D 6270-1998 |
土木工程應用中廢棄輪胎使用的標準操作規程 |
Standard Practice for Use of Scrap Tires in Civil Engineering Applications |
| ASTM D 6271-1998 |
估計環境煙草煙霧對茄呢醇基可吸入懸浮顆粒促成作用的標準試驗方法 |
Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol |
| ASTM D 6273-1998 |
天然氣氣味強度的標準試驗方法 |
Standard Test Methods for Natural Gas Odor Intensity |
| ASTM D 6274-1998 |
進行鉆孔地球物理巖芯記錄-γ的標準指南 |
Standard Guide for Conducting Borehole Geophysical Logging-Gamma |
| ASTM D 6275-1998 |
橋梁橋面的實驗室試驗的標準操作規程 |
Standard Practice for Laboratory Testing of Bridge Decks |
| ASTM D 6276-1999 |
用PH值估計土壤穩定要求的土壤石灰比例的標準試驗方法 |
Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization |
| ASTM D 6277-2001 |
使用中紅外光譜儀測定火花點火發動機燃料中苯的標準試驗方法 |
Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy |
| ASTM D 6278-1998 |
使用歐洲柴油機注射裝置的含多聚物的液流的剪切穩定性的標準試驗方法 |
Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus |
| ASTM D 6279-1999 |
高光澤度覆層耐摩擦損壞的試驗方法 |
Test Method for Rub Abrasion Mar resistance of High Gloss Coatings |
| ASTM D 628-1995 |
石棉套管的標準規范 |
Standard Specification for Asbestos Tubular Sleeving |
| ASTM D 6280-1998 |
磷酸鋅顏料的規范 |
Specification for Zinc Phosphate Pigments |
| ASTM D 6281-1998 |
通過透射電子顯微鏡直接轉移器對周圍環境和室內空氣中氣載石棉濃度的標準試驗方法 |
Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM) |
| ASTM D 6282-1998 |
環境位點特性分析用直推土壤采樣的標準指南 |
Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com