標準號 |
中文名稱 |
英文名稱 |
| ASTM B 713-1982 |
有關超導體術語的定義 |
Definitions of Terms Relating to Superconductors |
| ASTM B 714-1982 |
復合超導體D-C臨界電流的試驗方法 |
Test Method for D-C Critical Current of Composite Superconductors |
| ASTM B 715-1996 |
導電用燒結銅結構零件 |
Sintered Copper Structural Parts for Electrical Conductivity Applications |
| ASTM B 717-1996 |
釕精煉 |
Refined Ruthenium |
| ASTM B 718-1995 |
鎳鉻鉬鈷鎢鐵硅合金板,薄板和帶材 |
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Plate, Sheet and Strip |
| ASTM B 719-2000 |
鎳鉻鉬鈷鎢鐵硅合金(UNS N06333)棒標準規范 |
Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar |
| ASTM B 720-1993 |
無縫UNS NO8310管 |
Seamless UNS N08310 Tube |
| ASTM B 721-1991 |
粉末冶金(P/M)零件的顯微硬度和外層厚度的測試方法 |
Test Method for Microhardness and Case Depth of Powder Metallurgy (P/M) Parts |
| ASTM B 722-1995 |
鎳鉻鉬鈷鎢鐵硅合金無縫管 |
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Seamless Pipe and Tube |
| ASTM B 723-1995 |
鎳鉻鉬鈷鎢鐵硅合金焊接管 |
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe |
| ASTM B 724-2000 |
用新式輕便非卡尺型儀器測量鋁合金壓痕硬度的標準試驗方法 |
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Newage, Portable, Non-Caliper-Type Instrument |
| ASTM B 725-1993 |
焊接鎳和鎳銅合金管 |
Welded Nickel and Nickel Copper Alloy Pipe |
| ASTM B 726-1995 |
鎳鉻鉬鈷鎢鐵硅合金焊接管 |
Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Tube |
| ASTM B 727-1983 |
電鍍用塑料材料制備 |
Standard Practice for Preparation of Plastics Materials for Electroplating |
| ASTM B 729-1999 |
UNS N08020、N08026和N08024鎳合金無縫管 |
Seamless UNS N08020, UNS N08026 and UNS N08024 Nickel-Alloy Pipe and Tube |
| ASTM B 730-1993 |
焊接鎳和鎳銅合金管 |
Welded Nickel and Nickel Copper Alloy Tube |
| ASTM B 731-1996 |
60%鈀40%銀電觸點材料 |
60% Palladium-40% Silver Electrical Contact Material |
| ASTM B 732-1984 |
評定焊劑對銅管系統腐蝕性的測試方法 |
Test Method for Evaluating the Corrosivity of Solder Fluxes for Copper Tubing Systems |
| ASTM B 733-1990 |
金屬表面自動催化鎳磷涂層 |
Autocatalytic Nickel-Phosphorus Coatings on Metals |
| ASTM B 734-1997 |
工程用電沉積鍍銅 |
Electrodeposited Copper for Engineering Uses |
| ASTM B 735-1995 |
用硝酸蒸汽測試金屬基體上金涂層孔隙率的方法 |
Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor |
| ASTM B 736-2000 |
鋁、鋁合金和鋁包層鋼電纜屏蔽材料標準規范 |
Standard Specification for Aluminum, Aluminum Alloy and Aluminum-Clad Steel Cable Shielding Stock |
| ASTM B 737-1990 |
熱軋或/和冷加工成形的鉿條和線材 |
Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire |
| ASTM B 738-1998 |
電導線用成束細線和成束絞捻銅導線 |
Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors |
| ASTM B 739-1998 |
鉬鐵鉻硅合金焊接管 |
Nickel-Iron-Chromium-Silicon Alloy Welded Tube |
| ASTM B 740-1996 |
銅鎳錫旋節合金帶材 |
Copper-Nickel-Tin Spinodal Alloy Strip |
| ASTM B 741-1995 |
通過紙電譜法測量金屬基物上金涂層孔隙度的測試法 |
Test Method for Porosity in Gold Coatings on Metal Substrates by Paper Electrography |
| ASTM B 742-1990 |
電接觸用已加工優質銀材料 |
Fine Silver Electrical Contact Fabricated Material |
| ASTM B 743-2000 |
無縫銅螺旋管標準規范 |
Standard Specification for Seamless Copper Tube in Coils |
| ASTM B 744/B 744M-1999 |
波紋鋁管用鋁合金薄板 |
Aluminum Alloy Sheet for Corrugated Aluminum Pipe |
| ASTM B 745/B 745M-1997 |
下水道和排水系統用波紋鋁管 |
Corrugated Aluminum Pipe for Sewers and Drains |
| ASTM B 746/B 746M-1995 |
現場栓接管,管拱和拱用波紋鋁合金結構板 |
Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches and Arches |
| ASTM B 747-1996 |
銅鋯合金鋼板材和帶材 |
Copper-Zirconium Alloy Sheet and Strip |
| ASTM B 748-1990 |
用掃描電子顯微鏡測量橫截面測定金屬涂層厚度的方法 |
Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope |
| ASTM B 749-1997 |
鉛和鉛合金帶材、薄板和中厚板產品 |
Lead and Lead Alloy Strip, Sheet and Plate Products |
| ASTM B 75-1999 |
無縫銅管標準規范 |
Standard Specification for Seamless Copper Tube |
| ASTM B 750-1999 |
熱浸涂層金屬錠中5%鋅鋁鈰合金 |
Zinc-5% Aluminum-Mischmetal Alloy in Ingot Form for Hot-Dip Coatings |
| ASTM B 751-1999 |
鎳和鎳合金無縫和焊接管 |
Nickel and Nickel Alloy Seamless and Welded Tube |
| ASTM B 752-1997 |
通用耐腐蝕鋯基鑄件 |
Castings, Zirconium-Base, Corrosion Resistant for General Application |
| ASTM B 753-1986 |
恒溫器組件用合金 |
Thermostat Component Alloys |
| ASTM B 754-1989 |
銅及銅合金帶材平面偏差的測量和記錄的測試方法 |
Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip |
| ASTM B 755-1993 |
鎳鉻鉬鎢合金板,薄板和帶材 |
Nickel-Chromium-Molybdenum-Tungsten Alloys Plate, Sheet and Strip |
| ASTM B 756-1993 |
鎳鉻鉬鎢合金條和棒 |
Nickel-Chromium-Molybdenum-Tungsten Alloy Rod and Bar |
| ASTM B 757-1990 |
鎳鉻鉬鎢合金焊接管 |
Nickel-Chromium-Molybdenum-Tungsten-Alloys Welded Pipe |
| ASTM B 758-1995 |
鎳鉻鉬鎢合金焊接管 |
Nickel-Chromium-Molybdenum-Tungsten Alloys Welded Tube |
| ASTM B 759-1986 |
鎳鉻鉬鎢合金管 |
Nickel-Chromium-Molybdenum-Tungsten Alloys Pipe and Tube |
| ASTM B 76-1990 |
電加熱用鎳鉻和鎳鉻鐵合金的加速壽命的試驗方法 |
Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating |
| ASTM B 760-1986 |
鎢板,薄板和箔 |
Tungsten Plate, Sheet and Foil |
| ASTM B 761-1998 |
高溶點金屬及其化合物顆粒分布的X射線重力沉積監測試驗方法 |
Test Method for Particle Size Distribution of Refractory Metals and Their Compounds by X-Ray Monitoring of Gravity Sedimentation |
| ASTM B 762-1990 |
金屬涂層和無機物涂層的不同抽樣 |
Variables Sampling of Metallic and Inorganic Coatings |
| ASTM B 763-1998 |
閥門用銅合金砂型鑄件 |
Copper Alloy Sand Castings for Valve Application |
| ASTM B 764-1994 |
多層鎳鍍層中單層的同步厚度和電化學電勢測定方法(STEP試驗) |
Simultaneous Thickness and Electrochemical Potential Determination of Individual Layers in Multilayer Nickel Deposit (Step Test) |
| ASTM B 765-1993 |
電沉積鍍層和相關金屬鍍層孔隙率試驗的選擇 |
Selection of Porosity Tests for Electrodeposits and Related Metallic Coatings |
| ASTM B 766-1986 |
鎘電沉積涂層 |
Electrodeposited Coatings of Cadmium |
| ASTM B 767-1988 |
用重量分析法和其它化學分析法測定電沉積涂層及相關涂層單位面積的質量 |
Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures |
| ASTM B 768-1999 |
銅鈷鈹合金帶材和板材標準規范 |
Standard Specification for Copper-Cobalt-Beryllium Alloy Strip and Sheet |
| ASTM B 769-1994 |
鋁合金的剪切試驗 |
Shear Testing of Aluminum Alloys |
| ASTM B 77-1981 |
電阻合金的熱電功率的測試方法 |
Test Method for Thermoelectric Power of Electrical-Resistance Alloys |
| ASTM B 770-1996 |
通用銅鈹合金砂型鑄件 |
Copper-Beryllium Alloy Sand Castings for General Applications |
| ASTM B 771-1987 |
硬質合金短桿斷裂韌度的試驗方法 |
Test Method for Short Rod Fracture Toughness of Cemented Carbides |
| ASTM B 772-1997 |
電接觸材料(擊穿和非擊穿)化學成分的規定 |
Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing) |
| ASTM B 773-1996 |
用超聲波C掃描測定釬焊或焊接電觸點組件的粘接性 |
Ultrasonic C-Scan Bond Evaluation of Brazed or Welded Electrical Contact Assemblies |
| ASTM B 774-1995 |
低熔點金屬 |
Low Melting Point Alloys |
| ASTM B 775-2000 |
鎳和鎳合金焊接管一般要求的標準規范 |
Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe |
| ASTM B 776-1991 |
鉿和鉿合金帶材,薄板和中厚板 |
Hafnium and Hafnium Alloy Strip, Sheet and Plate |
| ASTM B 776a-2001 |
鉿及鉿合金帶材、薄板和中厚板標準規范 |
Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate |
| ASTM B 777-1999 |
鎢基高密度金屬 |
Tungsten Base, High-Density Metal |
| ASTM B 778-1997 |
成形線狀致密同芯絞捻鋁導線 |
Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW) |
| ASTM B 779-1996 |
鋼芯加強線狀致密同芯絞捻鋁導線 |
Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW) |
| ASTM B 78-1990 |
電加熱用鐵鉻鋁合金的加速壽命的試驗方法 |
Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating |
| ASTM B 780-1998 |
含銀75%、銅24.5%及鎳0.5%的電觸點合金 |
75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy |
| ASTM B 781-1993 |
銀鎘氧化接觸材料 |
Silver-Cadmium Oxide Contact Material |
| ASTM B 782-1994 |
燒結球墨鑄鐵軸承(注油) |
Iron Graphite Sintered Bearings (Oil-Impregnated) |
| ASTM B 783-1999 |
黑色粉末冶金結構部件用材料 |
Materials for Ferrous Powder Metallurgy Structural Parts |
| ASTM B 784-2000 |
絕緣電纜用改進的同芯絞捻銅導線標準規范 |
Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables |
| ASTM B 786-2000 |
次級絕緣用19股單絞捻1350型鋁導線標準規范 |
Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum 1350 Conductors for Subsequent Insulation |
| ASTM B 787-1993 |
次級絕緣用19股單絞捻銅導線 |
19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation |
| ASTM B 787/B 787M-2001 |
連續絕緣用19股金屬線組合單層絞線銅導線的標準規范 |
Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation |
| ASTM B 788/B 788M-2000 |
工廠制波紋鋁涵洞和雨水管安裝的標準實施規程 |
Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe |
| ASTM B 789/B 789M-1999 |
涵洞和下水道用波紋鋁結構板管安裝的標準實施規范 |
Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers |
| ASTM B 790/B 790M-2000 |
涵洞、排水和其它地下管道用波紋鋁管、管拱和拱結構設計的標準實施規程 |
Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits |
| ASTM B 791-1995 |
鋅鋁合金鑄造和壓模鑄造 |
Zinc-Aluminum Alloy Foundry and Die Castings |
| ASTM B 792-2001 |
空殼鑄造用鑄模中的鋅合金錠標準規范 |
Standard Specification for Zinc Alloys in Ingot Form for Slush Casting |
| ASTM B 793-1998 |
薄板金屬成型模用鋅鑄造合金錠 |
Zinc Casting Alloy Ingot for Sheet Metal Formimg Dies |
| ASTM B 794-1997 |
可拆卸電插接件耐耗試驗的電阻測量試驗方法 |
Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements |
| ASTM B 795-1993 |
低合金粉末鍛鋼部件的非合金鐵雜質的測試方法 |
Test Method for Unalloyed Iron Contamination of Low-Alloy Powder Forged Steel Parts |
| ASTM B 796-2000 |
粉末鍛鋼(P/F)部件的非金屬雜質含量的標準試驗方法 |
Standard Test Method for Nonmetallic Inclusion Level of Powder Forged (P/F) Steel Parts |
| ASTM B 797-1993 |
粉末鍛鋼部件中表面指狀氧化物穿透深度和粒子間氧化物網狀組織出現的測試方法 |
Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts |
| ASTM B 798-1995 |
用凝膠體電譜法測定金屬基物上金或鈀涂層孔隙度的測試方法 |
Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography |
| ASTM B 799-1995 |
用亞硫酸/SO2蒸汽測試金和鈀鍍層孔隙度的方法 |
Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/ Sulfur-Dioxide Vapor |
| ASTM B 8-1999 |
硬的、中等硬的或軟的同心絞捻的銅導線 |
Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard or Soft |
| ASTM B 80-1997 |
鎂合金砂型鑄件標準規范 |
Standard Specification for Magnesium-Alloy Sand Castings |
| ASTM B 800-2000 |
電氣用退火及中溫回火8000系列鋁合金導線標準規范 |
Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes-Annealed and Intermediate Tempers |
| ASTM B 801-1999 |
次級涂層或絕緣的8000系列鋁合金同芯絞捻導線 |
Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation |
| ASTM B 802-1994 |
鋼芯鋁導線用鋅5%鋁鈰合金涂覆的鋼芯線 |
Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ASCR) |
| ASTM B 802/B 802M-1998 |
鋼芯鋁導線(ASCR)用鋅5%鋁鈰合金涂覆鋼芯線 |
Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ASCR) |
| ASTM B 802M-1994 |
鋼芯鋁導線用鋅5%鋁鈰合金鍍覆的鋼芯線標準規范 |
Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR) Metric |
| ASTM B 803-1998 |
鋼芯鋁和鋁合金導線用高強度鋅5%鋁鈰合金涂覆鋼芯線 |
High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced |
| ASTM B 804-1996 |
UNS NO8367焊接管 |
UNS N08367 Welded Pipe |
| ASTM B 805-1995 |
UNS NO7716和NO7725沉淀硬化鎳合金鋼棒和鋼絲 |
Precipitation Hardening Nickel Alloys UNS N07716 and N07725, Bar and Wire |
| ASTM B 806-1993 |
通用銅合金永久鑄模鑄件 |
Copper Alloy Permanent Mold Castings for General Applications |
| ASTM B 807-1995 |
鋁合金用擠壓壓力溶液的熱處理 |
Extrusion Press Solution Heat Treatment for Aluminum Alloys |
| ASTM B 808-1997 |
用石英晶體微量天平監測室內大氣腐蝕的試驗方法 |
Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances |
| ASTM B 809-1995 |
用濕硫黃蒸氣(硫黃華)作金屬涂層中孔隙率測試的測試方法 |
Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (Flowers-of-Sulfur) |
| ASTM B 810-2000 |
通過銅試棒質量變化對大氣腐蝕試驗室進行校準的標準試驗方法 |
Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons |
| ASTM B 810a-2001 |
通過銅試棒質量變化對大氣腐蝕試驗室進行校準的標準試驗方法 |
Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons |
| ASTM B 811-2001 |
核反應堆燃料外包覆用鍛制鋯合金無縫管標準規范 |
Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding |
| ASTM B 812-1996 |
住宅設備用鋁制電壓連接件的阻止環境退化的試驗方法 |
Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications |
| ASTM B 813-2000 |
銅和銅合金管釬焊用液體和軟膏狀助熔劑的標準規范 |
Standard Specification for Liquid and Paste Fluxes for Soldering Applications of Copper and Copper Alloy Tube |
| ASTM B 814-1995 |
鎳鉻鐵鉬鎢合金板,薄板和帶材 |
Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy Plate, Sheet and Strip |
| ASTM B 815-1997 |
鈷鉻鎳鉬鎢合金桿 |
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy Rod |
| ASTM B 816-2000 |
鎘鋅機械沉積鍍層的標準規范 |
Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited |
| ASTM B 817-1998 |
粉末冶金(P/M)鈦合金結構件 |
Powder Metallurgy (P/M) Titanium Alloy Structural Components |
| ASTM B 818-1998 |
鈷鉻鎳鉬鎢合金板、薄板和帶材 |
Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy Plate, Sheet and Strip |
| ASTM B 819-1995 |
醫用氣體系統用無縫銅管 |
Seamless Copper Tube for Medical Gas Systems |
| ASTM B 820-1998 |
銅合金彈簧材料可成型性的彎曲試驗方法 |
Test Method for Bend Test for Formability of Copper Alloy Spring Material |
| ASTM B 822-1997 |
用光散射作金屬粉末和相關件的粒度分布測試的方法 |
Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering |
| ASTM B 823-1993 |
有色粉末冶金(P/M)結構件 |
Nonferrous Powder Metallurgy (P/M) Structural Parts |
| ASTM B 824-1996 |
銅合金鑄件 |
Copper Alloy Castings |
| ASTM B 825-1997 |
金屬試樣上表面薄膜的電量(庫侖)縮減試驗方法 |
Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com