標準號 |
中文名稱 |
英文名稱 |
| ASTM A 226/A 226M-1995 |
高壓鍋爐與過熱器用電阻焊接碳素鋼管 |
Electric-Resistance-Welded Carbon Steel Boiler and Superheater Tubes for High-Pressure Service |
| ASTM A 227/A 227M-1999 |
機械彈簧用冷拉鋼絲的規范 |
Steel Wire, Cold-Drawn for Mechanical Springs |
| ASTM A 228/A 228M-2000 |
樂器用優質彈簧鋼絲標準規范 |
Standard Specification for Steel Wire, Music Spring Quality |
| ASTM A 229/A 229M-1999 |
機械彈簧用油回火鋼絲規范 |
Steel Wire, Oil-Tempered for Mechanical Springs |
| ASTM A 230/A 230M-1999 |
閥門用油回火優質碳素彈簧鋼絲 |
Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| ASTM A 231/A 231M-1996 |
鉻釩合金鋼彈簧絲 |
Chromium-Vanadium Alloy Steel Spring Wire |
| ASTM A 232/A 232M-1999 |
閥門用優質鉻礬合金彈簧鋼絲 |
Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| ASTM A 234/A 234M-2000 |
中溫與高溫設備用鍛制碳素鋼及合金管配件標準規范 |
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
| ASTM A 234/A 234Ma-2001 |
中溫與高溫設備用鍛制碳素鋼及合金管配件標準規范 |
Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service |
| ASTM A 239-1995 |
用普力斯試驗法(硫酸銅浸蝕)確定鐵或鋼制品上鍍鋅層最薄點的測試方法 |
Test Method for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles by the Preece Test (Copper Sulfate Dip) |
| ASTM A 240/A 240M-2000 |
壓力容器用耐熱鉻及鉻鎳不銹鋼板、薄板和帶材的標準規范 |
Standard Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels |
| ASTM A 249/A 249M-2001 |
焊接奧氏體鋼鍋爐、過熱器、換熱器和冷凝器標準規范 |
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes |
| ASTM A 3-1987 |
低、中、高碳素鋼(未經熱處理的)連接桿 |
Steel Joint Bars, Low, Medium and High Carbon (Non-Heat-Treated) |
| ASTM A 3-2001 |
低、中、高碳素鋼(未經熱處理的)連接桿標準規范 |
Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) |
| ASTM A 31-1995 |
壓力容器用鋼鉚釘和鉚釘 |
Steel Rivets and Bars for Rivets, Pressure Vessels |
| ASTM A 31-2000 |
壓力容器鉚接用鋼鉚釘和鉚接棒的標準規范 |
Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels |
| ASTM A 312/A 312M-2001 |
無縫和焊接奧氏體不銹鋼管的標準規范 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
| ASTM A 312/A 312Ma-2001 |
無縫和焊接奧氏體不銹鋼管的標準規范 |
Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes |
| ASTM A 313/A 313M-1998 |
鉻鎳不銹鋼和耐熱鋼彈簧絲 |
Chromium-Nickel Stainless and Heat-Resisting Steel Spring Wire |
| ASTM A 314-1997 |
鍛造用不銹及耐熱鋼坯及鋼棒 |
Stainless and Heat-Resisting Steel Billets and Bars for Forging |
| ASTM A 319-1971 |
高溫?zé)o壓部件用灰鐵鑄件 |
Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts |
| ASTM A 320/A 320M-2001 |
低溫設備用合金/鋼螺栓材料標準規范 |
Standard Specification for Alloy/Steel Bolting Materials for Low-Temperature Service |
| ASTM A 321-1990 |
經淬火和回火的碳素鋼棒 |
Steel Bars, Carbon, Quenched and Tempered |
| ASTM A 322-1991 |
合金鋼棒材.級別 |
Steel Bars, Alloy, Grades |
| ASTM A 358/A 358M-2000 |
高溫設備用電熔焊奧氏體鉻鎳合金鋼管標準規范 |
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for High-Temperature Service |
| ASTM A 388/A 388M-1995 |
重型鋼鍛件超聲波檢測 |
Ultrasonic Examination of Heavy Steel Forgings |
| ASTM A 389/A 389M-1993 |
適合高溫受壓部件用經特殊熱處理的合金鋼鑄件規格 |
Steel Castings, Alloy, Specially Heat-Treated for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 391/A 391M-1998 |
合金鋼鏈 |
Alloy Steel Chain |
| ASTM A 392-1996 |
鍍鋅鋼絲鏈環欄柵網 |
Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM A 394-2000 |
鍍鋅或裸露的鋼制傳動塔架螺栓的標準規范 |
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare |
| ASTM A 395-1988 |
高溫用鐵素體球墨鑄鐵受壓鑄件 |
Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 395/A 395M-1999 |
高溫用鐵素體可鍛鐵保壓鑄件 |
Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ASTM A 401/A 401M-1998 |
鉻硅合金鋼絲 |
Steel Wire, Chromium-Silicon Alloy |
| ASTM A 403/A 403M-2001 |
鍛制奧氏體管不銹鋼配件標準規范 |
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings |
| ASTM A 472-1998 |
蒸汽渦輪機軸及轉子鍛件熱穩定性的試驗方法 |
Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings |
| ASTM A 473-2001 |
不銹鋼鍛件標準規范 |
Standard Specification for Stainless Steel Forgings |
| ASTM A 474-1998 |
包鋁鋼絞線 |
Aluminum-Coated Steel Wire Strand |
| ASTM A 475-1998 |
鍍鋅鋼絞線 |
Zinc-Coated Steel Wire Strand |
| ASTM A 476-1990 |
造紙廠干燥輥用球墨可鍛鑄鐵件 |
Ductile Iron Castings for Paper Mill Dryer Rolls |
| ASTM A 476M-1984 |
造紙廠干燥輥用球墨鑄鐵件(米制) |
Ductile Iron Castings for Paper Mill Dryer Rolls (Metric) |
| ASTM A 478-1997 |
鉻鎳不銹鋼和耐熱鋼制的編織鋼絲 |
Chromium-Nickel Stainless and Heat-Resisting Steel Weaving and Knitting Wire |
| ASTM A 479/A 479M-2000 |
鍋爐及其它壓力容器用不銹鋼棒與型材的標準規范 |
Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels |
| ASTM A 47M-1990 |
米制可鍛鐵素體鋼鑄件 |
Ferritic Malleable Iron Castings (Metric) |
| ASTM A 48-1994 |
灰鐵鑄件 |
Gray Iron Castings |
| ASTM A 480/A 480M-2001 |
平面軋輥不銹鋼和耐熱鋼板材、薄板和帶材一般要求的標準規范 |
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
| ASTM A 481-1994 |
金屬鉻 |
Chromium Metal |
| ASTM A 482-1993 |
鉻鐵硅 |
Ferrochrome-Silicon |
| ASTM A 483-1964 |
硅錳合金 |
Silicomanganese |
| ASTM A 484/A 484M-2000 |
不銹鋼棒、鋼坯及鍛件一般要求的標準規范 |
Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings |
| ASTM A 485-2000 |
高硬度減摩軸承鋼標準規范 |
Standard Specification for High Hardenability Antifriction Bearing Steel |
| ASTM A 487/A 487M-1993 |
受壓鋼鑄件 |
Steel Castings Suitable for Pressure Service |
| ASTM A 488/A 488M-2001 |
焊接鋼鑄件、程序和人員資格鑒定的標準實施規程 |
Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel |
| ASTM A 489-2000 |
碳素鋼吊耳標準規范 |
Standard Specification for Carbon Steel Lifting Eyes |
| ASTM A 48M-1994 |
米制灰鐵鑄件的標準規格 |
Standard Specification for Gray Iron Castings Metric |
| ASTM A 49-2001 |
熱處理碳素鋼連接棒材、微合金連接棒材和法蘭連接棒材的標準規范 |
Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars |
| ASTM A 490-2002 |
最小拉伸強度為150ksi的熱處理合金結構鋼螺栓標準規范 |
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength |
| ASTM A 490M-2000 |
結構鋼連接用10.9和10.9.3級高強度鋼螺栓(米制)標準規范 |
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] |
| ASTM A 491-1996 |
鍍鋁鋼鏈環欄柵網 |
Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM A 492-1995 |
耐熱不銹鋼絲繩 |
Stainless and Heat-Resisting Steel Rope Wire |
| ASTM A 493-1995 |
冷鐓和冷鍛不銹鋼和耐熱鋼絲 |
Stainless and Heat-Resisting Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| ASTM A 494/A 494M-2001 |
鎳和鎳合金鑄件標準規范 |
Standard Specification for Castings, Nickel and Nickel Alloy |
| ASTM A 494/A 494Ma-2001 |
鎳和鎳合金鑄件標準規范 |
Standard Specification for Castings, Nickel and Nickel Alloy |
| ASTM A 495-1994 |
硅鈣和硅錳鈣 |
Calcium-Silicon and Calcium-Manganese-Silicon |
| ASTM A 496-2001 |
混凝土鋼筋用變形鋼絲的標準規范 |
Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement |
| ASTM A 497-2001 |
混凝土用焊接變形鋼絲加筋的標準規范 |
Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete |
| ASTM A 498-1998 |
帶整體散熱片的無縫和焊接碳鋼、鐵素體和奧氏體合金鋼熱交換管 |
Seamless and Welded Carbon, Ferritic and Austenitic Alloy Steel Heat-Exchanger Tubes with Integral Fins |
| ASTM A 500-2001 |
圓形與異型冷成型焊接與無縫碳素鋼結構管標準規范 |
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 500a-2001 |
圓形與異型冷成型焊接與無縫碳素鋼結構管標準規范 |
Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 501-2001 |
熱成型焊接與無縫碳素鋼結構管標準規范 |
Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| ASTM A 502-1993 |
鋼結構鉚釘 |
Steel Structural Rivets |
| ASTM A 503-1975 |
鍛制大型曲軸的超聲波檢驗 |
Ultrasonic Examination of Large Forged Crankshafts |
| ASTM A 503/A 503M-2001 |
大型鍛件曲軸的超聲檢驗的標準規范 |
Standard Specification for Ultrasonic Examination of Large Forged Crankshafts |
| ASTM A 504-1993 |
鍛制碳素鋼輪 |
Wrought Carbon Steel Wheels |
| ASTM A 505-2000 |
熱軋和冷軋合金鋼薄板與帶材一般要求的標準規范 |
Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ASTM A 506-2000 |
熱軋和冷軋合金鋼和結構合金鋼薄板與帶材的標準規范 |
Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| ASTM A 507-2000 |
熱軋和冷軋拉制合金鋼薄板與帶材標準規范 |
Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled |
| ASTM A 508/A 508M-1995 |
壓力容器用經回火和淬火真空處理的碳素鋼與合金鍛件 |
Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels |
| ASTM A 510-2000 |
碳素鋼盤條和粗圓鋼絲一般要求的標準規范 |
Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel |
| ASTM A 511-1996 |
無縫不銹鋼機械管 |
Seamless Stainless Steel Mechanical Tubing |
| ASTM A 512-1996 |
冷拉對縫焊碳素鋼機械管 |
Cold-Drawn Buttweld Carbon Steel Mechanical Tubing |
| ASTM A 513-2000 |
電阻焊碳素鋼與合金鋼機械鋼管標準規范 |
Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 514/A 514M-2000 |
焊接用經淬火與回火的高屈服強度合金鋼板標準規范 |
Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding |
| ASTM A 515/A 515M-2001 |
中溫及高溫壓力容器用碳素鋼板的標準規范 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ASTM A 516/A 516M-2001 |
中溫及低溫壓力容器用碳素鋼板標準規范 |
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ASTM A 517/A 517M-1993 |
壓力容器用經回火與淬火的高強度合金鋼板 |
Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered |
| ASTM A 518-1992 |
耐蝕高硅鐵鑄件 |
Corrosion-Resistant High-Silicon Iron Castings |
| ASTM A 518/A 518M-1999 |
耐腐蝕的高硅生鐵鑄件的標準規范 |
Standard Specification for Corrosion-Resistant High-Silicon Iron Castings |
| ASTM A 518M-1992 |
耐蝕高硅鐵鑄件(米制) |
Corrosion-Resistant High-Silicon Iron Castings (Metric) |
| ASTM A 519-1996 |
無縫碳素鋼與合金鋼機械管 |
Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 520-1997 |
符合ISO 鍋爐結構推薦標準規定的高溫用無縫和電阻焊碳素鋼管形產品的補充要求 |
Supplementary Requirements for Seamless and Electric-Resistance-Welded Carbon Steel Tubular Products for High-Temperature Service Conforming to ISO Recommendations for Boiler Construction |
| ASTM A 521-1996 |
一般工業用閉式壓模鋼鍛件 |
Steel, Closed-Impression Die Forgings for General Industrial Use |
| ASTM A 522/A 522M-2001 |
低溫設備用鍛制或軋制含鎳8%和9%的合金鋼法蘭、配件、閥門和零件的標準規范 |
Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service |
| ASTM A 523-1996 |
高壓管型電纜線路用平端無縫與電阻焊鋼管 |
Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits |
| ASTM A 524-1996 |
常溫和低溫用無縫碳素鋼管 |
Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures |
| ASTM A 529/A 529M-1996 |
高強度碳錳結構鋼質量 |
High-Strength Carbon-Manganese Steel of Structural Quality |
| ASTM A 53-1996 |
黑色鍍鋅與熱浸鍍鋅的焊接和無縫鋼管 |
Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A 53/A 53M-1999 |
黑色和熱浸鍍鋅焊接及無縫鋼管規范 |
Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A 530/A 530M-1999 |
特種碳素鋼和合金鋼管 |
Specialized Carbon and Alloy Steel Pipe |
| ASTM A 531/A 531M-1991 |
渦輪發電機鋼定位環的超聲波檢驗 |
Ultrasonic Examination of Turbine-Generator Steel Retaining Rings |
| ASTM A 532/A 532M-1993 |
耐磨鑄鐵 |
Abrasion-Resistant Cast Irons |
| ASTM A 533/A 533M-1993 |
壓力容器用經回火和淬火的錳鉬及錳鉬鎳合金鋼板 |
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
| ASTM A 534-2001 |
用于耐摩擦軸承的滲碳鋼的標準規范 |
Standard Specification for Carburizing Steels for Anti-Friction Bearings |
| ASTM A 535-1985 |
特級滾珠軸承鋼和滾柱軸承鋼 |
Special-Quality Ball and Roller Bearing Steel |
| ASTM A 536-1984 |
球墨鑄鐵件 |
Ductile Iron Castings |
| ASTM A 537/A 537M-1995 |
壓力容器用經熱處理的碳錳硅鋼板 |
Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel |
| ASTM A 539-1999 |
天然氣和燃料油管線用電阻焊成卷帶鋼管 |
Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines |
| ASTM A 540/A 540M-2000 |
特殊用途合金鋼螺栓材料的標準規范 |
Standard Specification for Alloy-Steel Bolting Materials for Special Applications |
| ASTM A 541/A 541M-1995 |
壓力容器部件用經淬火和回火的碳素鋼及合金鋼鍛件 |
Steel Forgings, Carbon and Alloy, Quenched and Tempered for Pressure Vessel Components |
| ASTM A 542/A 542M-1999 |
壓力容器用經回火和淬火的鉻鉬、鉻鉬釩及鉻鉬釩鈦硼合金鋼板 |
Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, Chromium-Molybdenum-Vanadium and Chromium-Molybdenum-Vanadium-Titanium-Boron |
| ASTM A 543/A 543M-1993 |
壓力容器用經回火和淬火的鎳鉻鉬合金鋼板 |
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum |
| ASTM A 550-1978 |
鈮鐵合金 |
Ferrocolumbium |
| ASTM A 551-1994 |
鋼輪箍 |
Steel Tires |
| ASTM A 553/A 553M-1995 |
壓力容器用經回火和淬火的含8%及9%鎳的合金鋼板 |
Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel |
| ASTM A 554-1998 |
焊接的不銹鋼機械管 |
Welded Stainless Steel Mechanical Tubing |
| ASTM A 555/A 555M-1997 |
耐熱不銹鋼絲 |
Stainless and Heat-Resisting Steel Wire and Wire Rods |
| ASTM A 556/A 556M-1996 |
無縫冷拉碳素鋼給水加熱器管 |
Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
| ASTM A 560/A 560M-1993 |
鑄件,鉻鎳合金 |
Castings, Chromium-Nickel Alloy |
| ASTM A 561-1971 |
工具鋼棒的宏觀刻蝕試驗 |
Macroetch Testing of Tool Steel Bars |
| ASTM A 562/A 562M-1990 |
搪玻璃或擴散金屬鍍層的壓力容器用錳鈦合金碳素鋼板 |
Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings |
| ASTM A 563-2000 |
碳素鋼與合金鋼螺母標準規范 |
Standard Specification for Carbon and Alloy Steel Nuts |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com