標準號 |
中文名稱 |
英文名稱 |
| ASTM C 585-1990 |
公稱尺寸的管子(NPS系統)剛性熱絕緣材料的內外直徑 |
Inner and Outer Diameters of Rigid Thermal Insulation for Nominal Sizes of Pipe and Tubing (NPS System) |
| ASTM C 586-1999 |
混凝土集料用碳酸鹽巖石的潛在堿活性的標準試驗方法(巖石柱方法) |
Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (Rock Cylinder Method) |
| ASTM C 587-1997 |
石膏飾面板 |
Gypsum Veneer Plaster |
| ASTM C 588-1995 |
石膏基薄板 |
Gypsum Base for Veneer Plasters |
| ASTM C 588/C 588M-2001 |
薄板灰泥石膏基質標準規范 |
Standard Specification for Gypsum Base for Veneer Plasters |
| ASTM C 59-1995 |
石膏鑄件和模型用灰泥 |
Gypsum Casting and Molding Plaster |
| ASTM C 59/C 59M-2000 |
鑄模石膏和造型石膏標準規范 |
Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster |
| ASTM C 591-2001 |
非表面加工用預制剛性蜂窩狀聚氨基甲酸乙酯絕熱材料標準規范 |
Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation |
| ASTM C 592-1997 |
礦物纖維氈隔熱和氈型管隔熱(工業型,金屬網覆蓋的) |
Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) |
| ASTM C 595M-1997 |
混合水硬性水泥標準規范 |
Standard Specification for Blended Hydraulic Cements |
| ASTM C 601-1985 |
玻璃管的壓力試驗 |
Pressure Test on Glass Pipe |
| ASTM C 607-1988 |
焦化大型含碳承重材料 |
Coking Large Shapes of Carbon-Bearing Materials |
| ASTM C 609-1990 |
陶瓷壁磚的地面磚之間小量色差測量用試驗方法 |
Test Method for Measurement of Small Color Differences Between Ceramic Wall or Floor Tile |
| ASTM C 61/C 61M-2000 |
石膏金氏水泥標準規范 |
Standard Specification for Gypsum Keenes Cement |
| ASTM C 610-1999 |
模制膨脹珍珠巖制砌塊和管形絕熱材料標準規范 |
Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation |
| ASTM C 611-1998 |
在室溫時,炭加工品及石墨制品的電阻率的試驗方法 |
Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature |
| ASTM D 1644-2001 |
清漆中不揮發物含量的標準試驗方法 |
Standard Test Methods for Nonvolatile Content of Varnishes |
| ASTM D 1657-1989 |
用壓力溫差比重計測定輕烴類物質的密度或相對密度的測試方法 |
Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Thermohydrometer |
| ASTM D 1709-2001 |
用鋼錐自由下落法測試塑料薄膜抗沖擊性的標準試驗方法 |
Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method |
| ASTM D 1722-1998 |
水溶性溶劑的水可混性試驗方法 |
Test Method for Water Miscibility of Water-Soluble Solvents |
| ASTM D 1725-1962 |
樹脂溶液粘度的測試方法 |
Test Method for Viscosity of Resin Solutions |
| ASTM D 1729-1996 |
不透明材料色差的目測評估 |
Visual Evaluation of Color Differences of Opaque Materials |
| ASTM D 173-1997 |
屋頂和防水材料用飽和瀝青棉織物 |
Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing |
| ASTM D 1730-1967 |
涂漆鋁和鋁合金表面預處理 |
Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting |
| ASTM D 1731-1967 |
涂漆熱浸鋁表面預處理 |
Preparation of Hot-Dip Aluminum Surfaces for Painting |
| ASTM D 1732-1967 |
涂漆鎂合金表面預處理 |
Preparation of Magnesium Alloy Surfaces for Painting |
| ASTM D 1734-1993 |
涂料面漆測試用水泥板和瓦工板的制備 |
Making and Preparing Concrete and Masonry Panels for Testing Paint Finishes |
| ASTM D 1739-1998 |
降塵(可沉降粒狀物)的收集和測量的試驗方法 |
Test Method for the Collection and Measurement of Dustfall (Settleable Particulate Matter) |
| ASTM D 1954-1986 |
生亞麻油中油腳的測試方法(容積法) |
Test Method for Foots in Raw Linseed Oil (Volumetric Method) |
| ASTM D 2440-1999 |
礦物絕緣油氧化穩定性的試驗方法 |
Test Method for Oxidation Stability of Mineral Insulating Oil |
| ASTM D 2768-1995 |
電線和電纜用普通的乙丙橡膠護套 |
General-Purpose Ethylene-Propylene Rubber Jacket for Wire and Cable |
| ASTM D 2780-1992 |
液體中確定的氣體的可溶性測試方法 |
Test Method for Solubility of Fixed Gases in Liquids |
| ASTM D 2845-1995 |
巖石的脈沖速度和超聲波彈性常數的實驗室測定用試驗方法 |
Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock |
| ASTM D 2850-1995 |
在三軸壓縮中變松散的粘土的無排水壓縮強度的試驗方法 |
Test Method for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression |
| ASTM D 2851-1998 |
液態光學膠粘劑 |
Liquid Optical Adhesive |
| ASTM D 2852-1995 |
苯乙烯橡膠(SR)塑料排水管及配件 |
Styrene-Rubber (SR) Plastic Drain Pipe and Fittings |
| ASTM D 2854-1996 |
活性碳的表面密度的試驗方法 |
Test Method for Apparent Density of Activated Carbon |
| ASTM D 2855-1996 |
聚氯乙烯管和配件的液狀粘固劑接頭的制作 |
Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings |
| ASTM D 2858-1970 |
電氣級氧化鎂的熱傳導率的試驗方法 |
Test Method for Thermal Conductivity of Electrical Grade Magnesium Oxide |
| ASTM D 2863-1995 |
供給塑料的類似蠟燭燃燒時最低氧氣濃度的測量方法(氧指數) |
Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) |
| ASTM D 2866-1994 |
活性碳的總灰分的試驗方法 |
Test Method for Total Ash Content of Activated Carbon |
| ASTM D 2867-1999 |
活性碳濕度的試驗方法 |
Test Methods for Moisture in Activated Carbon |
| ASTM D 2868-1996 |
皮革的氮含量(Kjeldahl法)和生皮料含量的試驗方法 |
Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather |
| ASTM D 287-1992 |
原油和石油產品API比重的試驗方法(液體比重計法) |
Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) |
| ASTM D 2870-1986 |
焦油酸膠凝時間的試驗方法 |
Test Method for Gel Time of Tar Acids |
| ASTM D 2872-1997 |
加熱和空氣對移動瀝青膜影響的試驗方法(壓延薄膜爐試驗) |
Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) |
| ASTM D 2873-1994 |
用汞侵入孔率計測量聚氯乙烯樹脂內在孔隙率的試驗方法 |
Test Method for Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry |
| ASTM D 2875-1995 |
植物鞣制的皮革中不溶解性灰分的試驗方法 |
Test Method for Insoluble Ash of Vegetable-Tanned Leather |
| ASTM D 2876-1995 |
植物鞣的皮革中水溶性物質的試驗方法 |
Test Method for Water-Soluble Matter of Vegetable-Tanned Leather |
| ASTM D 2878-1995 |
潤滑油的表面蒸氣壓力和分子量的評估和試驗方法 |
Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils |
| ASTM D 2879-1997 |
蒸氣壓力計對液體的蒸氣壓力-溫度關系及起始分解溫度的試驗方法 |
Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope |
| ASTM D 2880-1998 |
燃氣輪機用燃料油 |
Gas Turbine Fuel Oils |
| ASTM D 2882-2000 |
石油和非石油液壓油在固定容積葉輪泵中消耗特性顯示的標準試驗方法 |
Standard Test Method for Indicating the Wear Characteristics of Petroleum and Non-Petroleum Hydraulic Fluids in Constant Volume Vane Pump |
| ASTM D 2883-1995 |
液體和固體材料的反應臨界溫度的試驗方法 |
Test Method for Reaction Threshold Temperature of Liquid and Solid Materials |
| ASTM D 3213-1991 |
硬度低未經擾動海積土的搬運、儲藏和制備 |
Handling, Storing and Preparing Soft Undisturbed Marine Soil |
| ASTM D 3214-1996 |
電絕緣用涂料粉末及其涂層的試驗方法 |
Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation |
| ASTM D 3215-1993 |
包覆型加熱件用電氣級氧化鎂的電阻率的測量方法 |
Test Method for Measurement of the Specific Electrical Impedance of Electrical-Grade Magnesium Oxide for Use in Sheathed-Type Heating Elements |
| ASTM D 3217-1995 |
線圈或打結的人造紡織纖維斷裂強度試驗方法 |
Test Methods for Breaking Tenacity of Man-Made Textile Fibers in Loop or Knot Configurations |
| ASTM D 3218-1993 |
聚烯烴單絲 |
Polyolefin Monofilaments |
| ASTM D 322-1997 |
蒸餾法測定汽油發動機廢機油中汽油稀釋劑的試驗方法 |
Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation |
| ASTM D 3222-1999 |
原聚偏氟乙烯模壓、擠壓和涂覆材料 |
Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials |
| ASTM D 3223-1995 |
水中總貢含量的試驗方法 |
Test Method for Total Mercury in Water |
| ASTM D 3224-1995 |
木材防腐液用輔助溶劑水溶性的試驗方法 |
Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions |
| ASTM D 3225-1973 |
油質防腐劑用低沸點烴類溶劑 |
Low-Boiling Hydrocarbon Solvent for Oil-Borne Preservatives |
| ASTM D 3227-1996 |
電位差法測定汽油、煤油航空汽輪機燃料及餾分燃料中硫醇態硫含量的試驗方法 |
Test Method for Mercaptan Sulfur in Gasoline, Kerosine, Aviation Turbine and Distillate Fuels (Potentiometric Method) |
| ASTM D 3228-1996 |
改進的克椰達方法測定潤滑油及燃料油中總氮量的試驗方法 |
Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method |
| ASTM D 323-1999 |
石油產品蒸氣壓力的試驗方法(瑞德法) |
Test Method for Vapor Pressure of Petroleum Products (Reid Method) |
| ASTM D 3230-1999 |
原油中含鹽量的試驗方法(電測法) |
Test Method for Salts in Crude Oil (Electrometric Method) |
| ASTM D 3231-1999 |
測定汽油中磷含量的試驗方法 |
Test Method for Phosphorus in Gasoline |
| ASTM D 3233-1993 |
液態潤滑劑極壓性能的試驗方法(潤滑油耐熱耐壓法) |
Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods) |
| ASTM D 3234-1988 |
石油蠟涂層耐磨性的試驗方法 |
Test Method for Abrasion Resistance of Petroleum Wax Coatings |
| ASTM D 3235-1997 |
石油蠟中溶劑可淬取性的試驗方法 |
Test Method for Solvent Extractables in Petroleum Waxes |
| ASTM D 3236-1988 |
熱熔粘合劑及涂層材料表觀粘度的試驗方法 |
Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials |
| ASTM D 3237-1997 |
原子吸收光譜法測定汽油中鉛含量的試驗方法 |
Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy |
| ASTM D 3238-1995 |
n-d-M法分析石油中碳分布及結構基團的計算方法 |
Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method |
| ASTM D 3239-1991 |
高電離電壓質譜法分析柴油芳烴餾分中芳烴類型的方法 |
Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry |
| ASTM D 3240-1991 |
航空渦輪機燃料中不溶解水的試驗方法 |
Test Method for Undissolved Water in Aviation Turbine Fuels |
| ASTM D 3241-2002 |
航空渦輪機燃料熱氧化穩定性的標準試驗方法(JFTOT法) |
Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) |
| ASTM D 3242-2001 |
測定航空渦輪機燃料酸度的標準試驗方法 |
Standard Test Method for Acidity in Aviation Turbine Fuel |
| ASTM D 3244-1997 |
測定與規范一致的試驗數據的應用 |
Utilization of Test Data to Determine Conformance with Specifications |
| ASTM D 3245-1996 |
工業燃料油的泵的抽送能力的試驗方法 |
Test Method for Pumpability of Industrial Fuel Oils |
| ASTM D 3246-1996 |
氧化微庫侖法測定石油氣中硫的試驗方法 |
Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| ASTM D 3249-1995 |
一般環境下空氣分析器使用程序 |
General Ambient Air Analyzer Procedures |
| ASTM D 3251-1999 |
作磁性金屬絲的薄膜絕緣用的電絕緣清漆的熱老化特性的標準試驗方法 |
Standard Test Method for Thermal-Aging Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire |
| ASTM D 3257-2001 |
氣相色譜法測定溶劑油中芳烴的標準試驗方法 |
Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography |
| ASTM D 3258-2000 |
漆膜孔隙率試驗方法 |
Test Method for Porosity of Paint Films |
| ASTM D 3259-1995 |
紅外線測定木制品涂層固化期間的溫度 |
Infrared Determination of the Temperature of Applied Coatings on Wood Products During the Curing Cycle |
| ASTM D 3260-2001 |
適用于工廠的壓制鋁制品透明涂層的耐酸和耐灰漿標準試驗方法 |
Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products |
| ASTM D 3261-1997 |
聚乙烯(PE)塑料管用端面熱熔接聚乙烯塑料配件 |
Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing |
| ASTM D 3262-2001 |
玻璃纖維增強熱固樹脂污水管標準規范 |
Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe |
| ASTM D 3263-1982 |
除去水沉積物用的溶劑系腐蝕性的試驗方法 |
Test Methods for Corrosivity of Solvent Systems for Removing Water-Formed Deposits |
| ASTM D 3264-1997 |
工業級苯胺 |
Industrial Grade Aniline |
| ASTM D 3265-2001 |
炭黑的標準試驗方法.著色強度 |
Standard Test Method for Carbon Black - Tint Strength |
| ASTM D 3266-1991 |
大氣中粒狀物及酸性氣態氟化物自動分離及收集的標準試驗方法(雙紙帶取樣法) |
Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| ASTM D 3267-1991 |
大氣中懸浮粒子及水溶性氣態氟化物的連續分離及收集方法(濾器法及沖擊器法) |
Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
| ASTM D 3268-1991 |
大氣中粒狀物和氣態氟化物分離及收集的標準試驗方法(碳酸氫鈉涂料玻璃管與粒狀物過濾器法) |
Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method) |
| ASTM D 3269-1996 |
大氣和植物組織中氟化物含量的分析方法(人工法) |
Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Manual Procedures) |
| ASTM D 3270-2000 |
大氣和植物組織中氟化物含量分析的標準試驗方法(半自動法) |
Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
| ASTM D 3271-1987 |
直接把溶劑稀釋的涂料注射到氣相色譜儀中進行溶劑分析 |
Direct Injection of Solvent-Reducible Paints into a Gas Chromatograph for Solvent Analysis |
| ASTM D 3272-1976 |
從溶劑稀釋涂料中真空蒸餾出分析用溶劑的方法 |
Vacuum Distillation of Solvents from Solvent-Reducible Paints for Analysis |
| ASTM D 3273-1994 |
環境模擬室內涂層表面的抗霉菌生長試驗方法 |
Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3274-1995 |
用真菌(真菌類的或藻類的)生長或污物和污垢堆積來評定漆膜表面損壞程度的方法 |
Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation |
| ASTM D 3275-1997 |
E-CTFE-氟塑料模壓、擠壓和涂覆材料 |
E-CTFE-Fluoroplastic Molding, Extrusion and Coating Materials |
| ASTM D 3276-2000 |
涂料(金屬底材)檢驗人員的標準指南 |
Standard Guide for Painting Inspectors (Metal Substrates) |
| ASTM D 3277-1995 |
經油浸漬的纖維素絕緣材料含水量的試驗方法 |
Test Method for Moisture Content of Oil-Impregnated Cellulosic Insulation |
| ASTM D 3279-1997 |
n-庚烷非溶物質的標準試驗方法 |
Standard Test Method for n-Heptane Insolubles |
| ASTM D 3280-1985 |
鋅白顏料的分析方法 |
Test Methods for Analysis of White Zinc Pigments |
| ASTM D 3281-1984 |
用沖擊邊緣彎曲儀測定附加有機涂層可成形性的試驗方法 |
Test Method for Formability of Attached Organic Coatings with Impact-Wedge Bend Apparatus |
| ASTM D 3282-1993 |
公路建設用土壤和土壤集料混合物的分類 |
Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes |
| ASTM D 3283-1998 |
作為電絕緣材料用的氣體 |
Air as an Electrical Insulating Material |
| ASTM D 3284-1999 |
野外電氣裝置的氣體空間中可燃性氣體的試驗方法 |
Test Method for Combustible Gases in the Gas Space of Electrical Apparatus in the Field |
| ASTM D 3285-1993 |
非吸水紙及紙板的吸水性的試驗方法(Cobb試驗) |
Test Method for Water Absorptiveness of Nonbibulous Paper and Paperboard (Cobb Test) |
| ASTM D 3286-1996 |
等溫彈式量熱器測定煤和焦炭總熱值的試驗方法 |
Test Method for Gross Calorific Value of Coal and Coke by the Isoperibol Bomb Calorimeter |
| ASTM D 3288-1997 |
磁性金屬絲瓷漆的試驗方法 |
Test Methods for Magnet-Wire Enamels |
| ASTM D 3289-1997 |
用鎳坩堝測定半固態及固態瀝青材料比重的試驗方法 |
Test Method for Specific gravity or Density of Semi-Solid and Solid Bituminous Materials by Nickel Crucible |
| ASTM D 329-1999 |
丙酮 |
Acetone |
| ASTM D 3290-2000 |
耐久記錄用證券紙和帳薄紙的標準規范 |
Standard Specification for Bond and Ledger Papers for Permanent Records |
| ASTM D 3291-1997 |
壓力作用下聚氯乙烯塑料中增塑劑的兼容性 |
Compatibility of Plasticizers in Poly (Vinyl Chloride) Plastics Under Compression |
| ASTM D 3293-1991 |
聚四氟乙烯樹脂模壓薄板 |
PTFE Resin Molded Sheet |
| ASTM D 3294-1997 |
聚四氟乙烯樹脂模壓薄板和型材 |
PTFE Resin Molded Sheet and Molded Basic Shapes |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com