標準號 |
中文名稱 |
英文名稱 |
| ASTM D 5347-1995 |
測量脂肪和油中的灰分含量的實驗方法 |
Test Method for Determination of the Ash Content of Fats and Oils |
| ASTM D 5348-1995 |
用二甲苯蒸餾測量碘化油和硫酸鹽油中的水含量的測試方法 |
Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene |
| ASTM D 5349-1995 |
用熱板法測量碘化油和硫酸鹽油中含水量和揮發量的測試方法 |
Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method |
| ASTM D 5350-1995 |
用滴定測試法A測量有機合成三氧化硫的測試方法 |
Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A |
| ASTM D 5351-1993 |
用萃取滴定法(試驗方法B)測定有機結合的三氧化硫的試驗方法 |
Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B |
| ASTM D 5352-1995 |
用灰分重量測試法C測量有機合成三氧化硫的測試方法 |
Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric Test Method C |
| ASTM D 5353-1995 |
全部脫硫脂肪物的測試方法 |
Test Method for Determination of Total Desulfated Fatty Matter |
| ASTM D 5354-1995 |
測量碘化油和硫酸鹽油中全部活性組分的測試方法 |
Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils |
| ASTM D 5355-1995 |
油和液體脂肪比重的測試方法 |
Test Method for Specific Gravity of Oils and Liquid Fats |
| ASTM D 5356-1993 |
鉻鞣溶液pH值的測試方法 |
Test Method for PH of Chrome Tanning Solutions |
| ASTM D 5357-1998 |
用X射線衍射法測定沸石鈉相對結晶度的標準試驗方法 |
Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium by X-Ray Diffraction |
| ASTM D 5358-1993 |
用汲取取樣器或搗碎取樣器取樣 |
Sampling with a Dipper or Pound Sampler |
| ASTM D 5359-1998 |
用于玻璃纖維的從廢物中回收的碎玻璃 |
Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber |
| ASTM D 5360-1998 |
瀝青路面治理的設計和施工 |
Design and Construction of Bituminous Surface Treatments |
| ASTM D 5361-2000 |
實驗室試驗用壓實瀝青混合料取樣的標準操作規程 |
Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing |
| ASTM D 5362-1997 |
織物耐粗磨標準試驗方法(豆袋試驗法) |
Standard Test Method for Snagging Resistance of Fabrics (Bean Bag Test Method) |
| ASTM D 5363-1997 |
厭氧的單一成分的膠粘劑(AN) |
Anaerobic Single-Component Adhesives (AN) |
| ASTM D 5364-1993 |
燃煤?jiǎn)挝徊ＡЮw維增強塑料煙囪襯里的設計,制造及安裝標準導則 |
Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units |
| ASTM D 5365-2001 |
玻璃鋼(玻璃纖維增強熱固樹脂)管長期環狀彎曲應變的標準試驗方法 |
Standard Test Method for Long-Term Ring-Bending Strain of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe |
| ASTM D 5366-1996 |
確定風向標動力特性的試驗方法 |
Test Method for Determining the Dynamic Performance of a Wind Vane |
| ASTM D 5367-1994 |
用水或水/磨料噴洗時為防止鋼生銹用抑制劑處理的表面上鍍層評定的標準規范 |
Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
| ASTM D 5368-1993 |
固體廢棄物樣品中溶劑可萃取總含量的重量分析測定試驗方法 |
Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples |
| ASTM D 5369-1993 |
用索格利特萃取法對化學分析用固體廢棄物樣品的萃取 |
Extraction of Solid Waste Samples for Chemical Analysis Using Soxhlet Extraction |
| ASTM D 537-1985 |
偏硅酸納規格 |
Sodium Metasilicate |
| ASTM D 5370-1996 |
結構用火山灰混合材料的標準規范 |
Standard Specification for Pozzolanic Blended Materials in Construction Applications |
| ASTM D 5372-1993 |
烴類熱傳導液體的評定 |
Evaluation of Hydrocarbon Heat Transfer Fluids |
| ASTM D 5373-1993 |
煤和焦碳的實驗室樣品中碳、氫和氮的儀器測定試驗方法 |
Test Methods for Instrumental Determination of Carbon, Hydrogen and Nitrogen in Laboratory Samples of Coal and Coke |
| ASTM D 5374-1993 |
電絕緣評定用實驗室強制對流爐的試驗方法 |
Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 5375-1993 |
高速下從壓敏標桿上去除襯里的標準試驗方法 |
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
| ASTM D 5375/D 5375M-1998 |
從壓敏標簽備料中高速線性搬動的標準試驗方法 |
Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock |
| ASTM D 5376-1993 |
橡膠的化學試驗方法.測定橡膠防老化劑中氮的百分比含量:聚合的四氫呋喃(TMQ) |
Test Method for Rubber Chemicals - Determination of the Percent Nitrogen in Rubber Antioxidant: Polymerized TMQ |
| ASTM D 5377-1993 |
橡膠配料的分類.底煤 |
Classification for Rubber Compounding Materials - Ground Coal |
| ASTM D 5378-1993 |
單位和家用編織和針織浴簾的標準性能規范 |
Standard Performance Specification for Woven and Knitted Shower Curtains for Institutional and Household Use |
| ASTM D 5379/D 5379M-1998 |
用V形切口梁法測定復合材料剪切性能的標準試驗方法 |
Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method |
| ASTM D 538-1985 |
磷酸三納規格 |
Trisodium Phosphate |
| ASTM D 5380-1993 |
用X射線繞射分析法鑒定涂料中顏料和填充劑的試驗方法 |
Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis |
| ASTM D 5381-1993 |
顏料和填充劑的X射線螢光(XRF)光譜分析 |
X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders |
| ASTM D 5382-2002 |
粉末涂層光學特性評定標準指南 |
Standard Guide to Evaluation of Optical Properties of Powder Coatings |
| ASTM D 5383-1997 |
工藝美術工作者用工美材料光牢性的目視確定 |
Visual Determination of the Lightfastness of Art Materials by Art Technologists |
| ASTM D 5384-1995 |
用過的石油產品中氯含量標準試驗方法(現場試驗工具法)1 |
Standard Test Method for Chlorine in Used Petroleum Products (Field Test Kit Method)1 |
| ASTM D 5385-1993 |
防水材料耐靜水壓力的試驗方法 |
Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes |
| ASTM D 5386-1993 |
用三色激勵測色法對烴類純凈液體進行儀器測量的試驗方法 |
Test Method for Instrumental Measurement of Clear Liquid Hydrocarbons Using Tristimulus Colorimetry |
| ASTM D 5387-1993 |
非粘性沉積物用全套數據集單標準導則 |
Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments |
| ASTM D 5388-1993 |
步進回水法間接測量放電的試驗方法 |
Test Method for Indirect Measurements of Discharge by Step-Backwater Method |
| ASTM D 5389-1993 |
用傳聲速度計系統測試明渠流量的試驗方法 |
Test Method for Open Channel Flow Measurement by Acoustic Velocity Meter Systems |
| ASTM D 5390-1993 |
Palmer-Bowlus量水槽測量水的明渠流量的試驗方法 |
Test Method for Open Channel Flow Measurement of Water with Palmer-Bowlus Flumes |
| ASTM D 5391-1999 |
高純度流動水樣品電導性和電阻率的測試方法 |
Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample |
| ASTM D 5392-1993 |
用兩步膜濾法分離和計數水中大腸桿菌的標準試驗方法 |
Standard Test Method for Isolation and Enumeration of Escherichia Coli in Water by the Two-Step Membrane Filter Procedure |
| ASTM D 5393-1993 |
汽車內部裝飾材料耐霧性能測定的標準試驗方法 |
Standard Test Method for Determination of Fogging Characteristics of Vehicle Interior Trim Materials |
| ASTM D 5394-1997 |
回收的1,1,1-三氯乙烷 |
Reclaimed 1,1,1-Trichloroethane |
| ASTM D 5395-1997 |
回收的二氯甲烷 |
Reclaimed Methylene Chloride |
| ASTM D 5396-2000 |
再生全氯乙烯的標準規范 |
Standard Specification for Reclaimed Perchloroethylene |
| ASTM D 5397-1999 |
用缺口恒定拉力荷載試驗評價聚烯烴土工薄膜抗應力扯裂的標準試驗方法 |
Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 5398-1997 |
用戶用工美材料光牢性的目視確定 |
Visual Evaluation of the Lightfastness of Art Materials by the User |
| ASTM D 5399-1995 |
氣相色譜法測定烴類溶劑沸點分布的試驗方法 |
Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography |
| ASTM D 5400-1993 |
羥基丙基纖維素試驗方法 |
Test Methods for Hydroxypropylcellulose |
| ASTM D 5401-1993 |
鑒定木材透明防水覆層的試驗方法 |
Test Method for Evaluating Clear Water Repellent Coatings on Wood |
| ASTM D 5402-1993 |
用溶劑擦除法評價有機覆層的耐溶劑性 |
Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs |
| ASTM D 5403-1993 |
輻射固化材料中揮發物含量的測試方法 |
Test Methods for Volatile Content of Radiation Curable Materials |
| ASTM D 5404-1997 |
用旋轉蒸氣裝置從溶液中回收瀝青的試驗方法 |
Test Method for Recovery of Asphalt from Solution Using the Rotavapor Apparatus |
| ASTM D 5405-1998 |
非瀝青質有機屋面薄膜材料接縫的蠕變斷裂時間試驗方法 |
Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material |
| ASTM D 5406-1993 |
橡膠.生產加工性能指數的計算 |
Rubber-Calculation of Producers Process Performance Indexes |
| ASTM D 5407-1995 |
不使用孔隙壓力測量的三軸壓縮中未排水完整巖心試樣彈性模量的標準試驗方法 |
Standard Test Method for Elastic Moduli of Undrained Intact Rock Core Specimens in Triaxial Compression Without Pore Pressure Measurement |
| ASTM D 5408-1993 |
描述地下水位置的數據集標準導則:第1部分:附加識別描述符 |
Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part One-Additional Identification Descriptors |
| ASTM D 5409-1993 |
描述地下水位置的數據集標準導則:第二部分:物質描述符 |
Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Two-Physical Descriptors |
| ASTM D 541-1987 |
單支黃麻紗規格 |
Single Jute Yarn |
| ASTM D 5410-1993 |
描述地下水位的數據單定位的標準指南.第3部分:使用描述符 |
Standard Guide for Set of Data Elements to Describe a Ground-Water Site; Part Three-Usage Descriptors |
| ASTM D 5411-1993 |
反應堆冷卻劑中放射性核素混合物每次蛻變的平均能量(E)計算的標準規范 |
Standard Practice for Calculation of Average Energy Per Disintegration (E) for a Mixture of Radionuclides in Reactor Coolant |
| ASTM D 5412-1993 |
水中絡合多環芳烴混合物或石油定量的標準試驗方法 |
Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water |
| ASTM D 5413-1993 |
開口水體中水位測量的標準試驗方法 |
Standard Test Methods for Measurement of Water Levels in Open-Water Bodies |
| ASTM D 5414-1995 |
使用張拉薄膜評定載荷的水平?jīng)_擊性能的標準試驗方法 |
Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films |
| ASTM D 5415-1995 |
使用振動試驗評定張拉材料的載荷保持性能的標準試驗方法 |
Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Materials by Vibration Testing |
| ASTM D 5416-1995 |
使用振動試驗評定張拉材料耐磨性能的標準試驗方法 |
Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Materials by Vibration Testing |
| ASTM D 5417-1999 |
維特曼(Vettermann)轉鼓試驗儀器的操作 |
Operation of the Vettermann Drum Tester |
| ASTM D 5418-1999 |
用雙懸臂梁測量塑料動態力學性能的試驗方法 |
Standard Test Method for Measuring the Dynamic Mechanical Properties of Plastics Using a Dual Cantilever Beam |
| ASTM D 5419-1995 |
螺紋塑料密封箱抗環境應力裂開性能的標準試驗方法 |
Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures |
| ASTM D 542-1995 |
透明有機塑料的折射指數的試驗方法 |
Test Method for Index of Refraction of Transparent Organic Plastics |
| ASTM D 5420-1998 |
使用落錘沖擊(Gardner沖擊)法的硬質塑性扁平試樣耐沖擊性能標準試驗方法 |
Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact) |
| ASTM D 5421-1993 |
接觸模制玻璃纖維(玻璃-纖維-增強熱固樹脂)法蘭的標準規范 |
Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges |
| ASTM D 5422-1993 |
用螺旋擠壓毛細管流變計測量熱塑性塑料性能的標準試驗方法 |
Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer |
| ASTM D 5423-1993 |
電絕緣評定用實驗室強制對流爐 |
Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ASTM D 5424-1998 |
電纜或光纜的絕緣材料在立式電纜槽結構中燃燒時煙霧造成黯淡的標準試驗方法 |
Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration |
| ASTM D 5425-1996 |
制定電工技術產品易燃性評定標準用的標準指南 |
Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products |
| ASTM D 5426-1997 |
充氣減震織物的外觀檢查和等級評定的標準操作規程 |
Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints |
| ASTM D 5426a-2001 |
充氣減震織物的外觀檢查和等級評定的標準實施規程 |
Standard Practices for Visual Inspection and Grading of Fabrics Used for Inflatable Restraints |
| ASTM D 5427-1998 |
充氣減震織物的加速老化 |
Accelerated Aging of Inflatable Restraint Fabrics |
| ASTM D 5428-1993 |
評價充氣減震軟組件性能的方法 |
Evaluating the Performance of Inflatable Restraint Modules |
| ASTM D 5429-1993 |
紡織材料保存研究用背襯織物的預處理 |
Pretreatment of Backing Fabrics Used in Textile Conservation Research |
| ASTM D 543-1995 |
塑料耐化學試劑性能的試驗方法 |
Test Method for Resistance of Plastics to Chemical Reagents |
| ASTM D 5430-1993 |
織物目視檢驗分級的標準試驗方法 |
Standard Test Methods for Visually Inspecting and Grading Fabrics |
| ASTM D 5431-1993 |
公共機構和家用編織及針織制品的性能規范 |
Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use |
| ASTM D 5432-1993 |
公共機構和家用毛毯制品的性能規范 |
Performance Specification for Blanket Products for Institutional and Household Use |
| ASTM D 5433-2000 |
公共機構和家用毛巾制品的標準性能規范 |
Standard Performance Specification for Towel Products for Institutional and Household Use |
| ASTM D 5434-1997 |
土壤和巖石地下爆炸現場記錄的標準導則 |
Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock |
| ASTM D 5435-1993 |
植物生長和食物鏈保護的土壤診斷試驗標準試驗方法 |
Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection |
| ASTM D 5436-1999 |
鑄造聚甲基丙烯酸甲酯塑料棒材、管材和型材標準規范 |
Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes |
| ASTM D 5437-1993 |
曝露在海洋環境下的塑料的老化性試驗 |
Weathering of Plastics Under Marine Floating Exposure |
| ASTM D 5438-2000 |
化學分析用地板塵埃采集的標準實施規程 |
Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM D 5439-1995 |
測定麂皮脂中沉淀物質的測試方法 |
Test Method for Determination of Sediment in Moellon |
| ASTM D 5440-1993 |
測定脂肪和油熔點的試驗方法 |
Test Method for Determining the Melting Point of Fats and Oils |
| ASTM D 5441-1998 |
用色譜法分析甲基特丁基乙醚的標準試驗方法 |
Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography |
| ASTM D 5442-1993 |
用色譜法分析石油石蠟的標準試驗方法 |
Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography |
| ASTM D 5443-1993 |
200℃用多維氣相色譜法分析石油餾份中石蠟,環烷和芳烴類型的標準試驗方法 |
Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200degree C by Multi-Dimensional Gas Chromatography |
| ASTM D 5444-1998 |
萃取集料機械粒度分析的測試方法 |
Test Method for Mechanical Size Analysis of Extracted Aggregate |
| ASTM D 5445-2001 |
商品貯運用圖示標志的標準實施規程 |
Standard Practice for Pictorial Markings for Handling of Goods |
| ASTM D 5446-2001 |
測定膨脹式安全保護裝置用織物、紗線和縫紉線物理性能的標準實施規范 |
Standard Practice for Determining Physical Properties of Fabrics, Yarns, and Sewing Thread Used in Inflatable Restraints |
| ASTM D 5447-1993 |
地下水流型應用于現場特定問題的標準導則 |
Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem |
| ASTM D 5448/D 5448M-1993 |
環形纏繞聚合母體復合圓柱體的表面剪切特性的標準試驗方法 |
Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 5449/D 5449M-1993 |
環箍繞制的聚合物基體合成材料圓筒的橫向抗壓縮性能的標準試驗方法 |
Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 545-1999 |
混凝土結構用預制膨脹接縫填料的試驗方法(非擠壓和彈性型) |
Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) |
| ASTM D 5450/D 5450M-1993 |
環箍繞制的聚合物基體合成材料圓筒的橫向抗拉性能的標準試驗方法 |
Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders |
| ASTM D 5452-2000 |
實驗室滲透法測試航空燃料中微粒子污染的標準試驗方法 |
Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
| ASTM D 5453-1993 |
用紫外熒光法測定輕質烴,發動機燃料和油中總的硫含量的標準試驗方法 |
Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence |
| ASTM D 5454-1993 |
使用電子濕度分析儀測定氣體燃料中水蒸汽含量的標準試驗方法 |
Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers |
| ASTM D 5455-1993 |
紙中短時間液體吸附的標準試驗方法(BRISTOW試驗) |
Standard Test Method for Short-Term Liquid Sorption Into Paper (Bristow Test) |
| ASTM D 5456-2001 |
結構復合木制品評定的標準規范 |
Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5456a-2001 |
結構復合木制品評定的標準規范 |
Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM D 5457-1993 |
載荷和阻力系數設計用木基材料和結構連接件的標準阻力計算標準規范 |
Standard Specification for Computing the Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design |
| ASTM D 5458-1995 |
張拉材料剝離的標準試驗方法 |
Standard Test Method for Peel Cling of Stretch Wrap Material |
| ASTM D 5459-1995 |
張拉材料加工方向彈性恢復和永久變形和應力保持標準試驗方法 |
Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Materials |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com