標準號 |
中文名稱 |
英文名稱 |
| ANSI/ASTM F439-2002 |
套節型氯化聚氯乙烯(CPVC)塑料管配件規范(80號表) |
(Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 ) |
| ANSI/ASTM F439-2005 |
氯化聚氯乙烯(CPVC)塑料管配件規范.表80 |
|
| ANSI/ASTM F449-2002 |
農業排水或地下水位控制用熱塑塑料波紋管地下安裝實施規程 |
(Practice for Subsurface Installation of Corrugated Thermoplastic Tubing for Agricultural Drainage or Water Table Control ) |
| ANSI/ASTM F477-2002 |
連接塑料管用的彈性密封墊圈的規范 |
(Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe ) |
| ANSI/ASTM F480-2002 |
采用標準尺寸比(SDR)制作的熱塑性壁鑄造管和耦合件規范(表40和表80) |
(Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), Schedule 40 and Schedule 80) ) |
| ANSI/ASTM F493-2004 |
氯化聚氯乙烯(CPVC)塑料管及配件用溶劑粘結劑規范 |
|
| ANSI/ASTM F539-2002 |
組裝運動鞋的操作規范 |
(Practice for Fitting Athletic Footwear ) |
| ANSI/ASTM F542-2002 |
電子件及微電子件封裝用密封化合物發熱溫度的試驗方法 |
(Test Method for Exothermic Temperature of Encapsulating Compounds for Electronic and Microelectronic Encapsulation ) |
| ANSI/ASTM F588-2004 |
窗組件(不包括門窗玻璃)抗強力進入的試驗方法 |
|
| ANSI/ASTM F610/F 610M-2005 |
用熱循環技術評價模塑聚氯乙烯(PVC)塑料管配件質量的試驗方法 |
|
| ANSI/ASTM F645-2002 |
熱塑性水壓管道系統的選材、設計和安裝指南 |
(Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems ) |
| ANSI/ASTM F645-2004 |
熱塑性水壓管道系統的選定、設計和安裝指南 |
|
| ANSI/ASTM F656-2002 |
聚氯乙烯塑料管和配件的溶劑膠結接口用打底劑規范 |
(Specification for Primers for Use in Solvent Cement Joints of Poly (Vinyl Chloride) (PVC) Plastic Pipe and Fittings ) |
| ANSI/ASTM F677-2004 |
用于電子和微電子設備的熱固性封裝復合劑的耐液體和油脂的試驗方法 |
|
| ANSI/ASTM F679-2003 |
聚氯乙烯(PVC)大尺寸塑料重力污水管和配件的規范 |
(Specification for Poly (Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings ) |
| ANSI/ASTM F683-2003 |
管道和機械設備用絕熱材料的選擇和應用實施規程 |
(Practice for Selection and Application of Thermal Insulation for Piping and Machinery ) |
| ANSI/ASTM F683-2004 |
管道和機械隔熱的選定和應用實施規程 |
|
| ANSI/ASTM F714-2003 |
以外徑尺寸為基準的聚乙烯(PE)塑料管(SDR-PR)規范 |
(Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter ) |
| ANSI/ASTM F771-2005 |
聚乙烯(PE)熱塑性高壓灌溉管道系統規范 |
|
| ANSI/ASTM F803-2003 |
網球運動員用的護目器規范 |
(Specification for Eye Protectors for Use by Players of Racket Sports ) |
| ANSI/ASTM F842-2004 |
水平推拉門組件抗強力進入的試驗方法 |
|
| ANSI/ASTM F876-2003 |
交聯聚乙烯(PEX)管的規范 |
(Specification for Crosslinked Polyethylene (PEX) Tubing ) |
| ANSI/ASTM F876-2004 |
交聯聚乙烯(PEX)管規范 |
|
| ANSI/ASTM F877-2002 |
交聯聚乙烯(PEX)塑料冷-熱水配水系統的規范 |
(Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems ) |
| ANSI/ASTM F905-2004 |
聚乙烯鞍形熔融接頭合格鑒定的實施規范 |
|
| ANSI/ASTM F910-2004 |
青少年棒球運動員用面部保護罩的規范 |
|
| ANSI/ASTM F913-2002 |
連接塑料管用熱塑彈性密封件(墊圈)規范 |
(Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe ) |
| ANSI/ASTM F914-2003 |
航空人員隔音裝置用聲發射的試驗方法 |
(Test Method for Acoustic Emission for Insulated Aerial Personnel Devices ) |
| ANSI/ASTM F987-2004 |
輕便的中等平甲板支撐物規范 |
|
| ANSI/ASTM F991M-2004 |
泄水孔塞/放泄塞和軸節配件的規范(米制) |
|
| ANSI/ASTM F998-2002 |
船用離心泵規范 |
(Specification for Centrifugal Pump, Shipboard Use ) |
| ANSI/ASTM F998-2004 |
船用離心泵規范 |
|
| ANSI/sort/IEEE/ASTM SI 10-1997 |
國際單位制的使用標準:現代米制 |
Standard for Use of the International System of Units (SI): The Modern Metric System |
| ANSI/sort/IEEE/ASTM SI10-2002 |
國際單位制(SI)的使用標準:現代米制系列 |
(Standard for Use of the International System of Units (SI): The Modern Metric System ) |
| ASTM A 1-1992 |
碳素鋼丁字軌 |
Carbon Steel Tee Rails |
| ASTM A 100-1993 |
硅鐵 |
Ferrosilicon |
| ASTM A 1001-2001 |
重型型鋼中高強度鋼鑄件的標準規范 |
Standard Specification for High Strength Steel Castings in Heavy Sections |
| ASTM A 1002-1999 |
鎳鋁有序合金鑄件的標準規范 |
Standard Specification for Castings, Nickel-Aluminum Ordered Alloy |
| ASTM A 1007-2002 |
鋼絲繩用碳素鋼絲標準規范 |
Standard Specification for Carbon Steel Wire for Wire Rope |
| ASTM A 1008/A 1008M-2001 |
冷軋?zhí)间�、結構鋼、高強度低合金鋼和可加工性提高的高強度低合金鋼薄板的標準規范 |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
| ASTM A 1008/A 1008Ma-2001 |
冷軋?zhí)间摗⒔Y(jié)構鋼、高強度低合金鋼和可加工性提高的高強度低合金鋼薄板的標準規范 |
Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
| ASTM A 1009-2000 |
高頻(10kHz-1 MHz)電力變壓器和濾波感應器用軟磁性MnZn鐵芯材料標準規范 |
Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications |
| ASTM A 101-1993 |
鉻鐵 |
Ferrochromium |
| ASTM A 1010-2000 |
高強度馬氏體不銹鋼板、薄板和帶材標準規范 |
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip |
| ASTM A 1010/A 1010M-2001 |
高強度馬氏體不銹鋼板材、薄板和帶材的標準規范 |
Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet , and Strip |
| ASTM A 1011/A 1011M-2001 |
熱軋?zhí)间�、結構鋼、高強度低合金鋼和可加工性提高的高強度低合金鋼薄板和帶材的標準規范 |
Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability |
| ASTM A 1015-2001 |
衛生潔具用管形制品的目視內孔探測檢驗的標準指南 |
Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications |
| ASTM A 1016/A 1016M-2002 |
鐵素體合金鋼管、奧氏體合金鋼管和不銹鋼管一般要求的標準規范 |
Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
| ASTM A 1017/A 1017M-2001 |
鉻鉬鎢合金鋼制壓力容器板的標準規范 |
Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten |
| ASTM A 1018/A 1018M-2001 |
改良可成形性高強度低合金和高強度低合金、鈳或釩、結構性、熱滾軋、深厚度、碳鋼卷材、薄板和帶材的標準規范 |
Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy with Improved Formability |
| ASTM A 1018/A 1018Ma-2001 |
熱軋?zhí)间�、結構鋼、高強度低合金鋼、鈮或釩鋼及可加工性提高的高強度低合金鋼薄板、帶材和特厚卷材的標準規范 |
Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, Hot Rolled, Carbon, Structural, High-Strength Low-Alloy, Columbium or Vanadium, and High-Strength Low-Alloy with Improved Formability |
| ASTM A 1019/A 1019M-2001 |
排污和排水用聚合物預涂的直徑為36英寸或不足36英寸的閉合肋鋼管的標準規范 |
Standard Specification for Closed Rib Steel Pipe with Diameter of 36 in. [900 mm] or Less, Polymer Precoated for Sewers and Drains |
| ASTM A 102-1993 |
釩鐵合金 |
Ferrovanadium |
| ASTM A 1020/A 1020M-2001 |
評價被動植入物MR圖像制品的標準試驗方法 |
Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants |
| ASTM A 1021-2001 |
高溫設備用馬氏體不銹鋼鍛件和鍛坯的標準規范 |
Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service |
| ASTM A 1022-2001 |
混凝土鋼筋用刻痕和普通不銹鋼鋼絲和焊接鋼絲的標準規范 |
Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement |
| ASTM A 105/A 105M-1998 |
管道部件用碳素鋼鍛件 |
Forgings, Carbon Steel for Piping Components |
| ASTM A 106-1999 |
高溫設備用無縫碳素鋼管規范 |
Seamless Carbon Steel Pipe for High-Temperature Service |
| ASTM A 108-1999 |
優質冷精整碳鋼棒 |
Steel Bars, Carbon, Cold Finished, Quality |
| ASTM A 109-1993 |
冷軋?zhí)妓劁搸?/td>
| Steel, Strip, Carbon, Cold-Rolled |
| ASTM A 109/A 109M-2000 |
冷軋?zhí)间?碳最大百分比0.25)帶材標準規范 |
Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled |
| ASTM A 111-1999 |
電話和電報線路用鍍鋅鐵絲規格 |
Zinc-Coated (Galvanized) Iron Telephone and Telegraph Line Wire |
| ASTM A 116-2000 |
金屬涂覆鋼絲編織欄柵網標準規范 |
Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric |
| ASTM A 121-1999 |
鍍鋅刺鋼絲 |
Zinc-Coated (Galvanized) Steel Barbed Wire |
| ASTM A 123-1989 |
鍍鋅(熱浸鍍鋅)鋼鐵產品 |
Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM A 123/A 123M-2001 |
鐵和鋼制品鍍鋅層(熱浸鍍鋅)標準規范 |
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM A 123/A 123Ma-2001 |
鋼鐵制品鍍鋅層(熱浸鍍鋅)標準規范 |
Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ASTM A 125-1996 |
熱處理螺旋形鋼彈簧 |
Steel Springs, Helical, Heat Treated |
| ASTM A 126-1995 |
閥門、法蘭和管配件用灰鐵鑄件 |
Gray Iron Castings for Valves, Flanges and Pipe Fittings |
| ASTM A 128/A 128M-1993 |
鋼鑄件,奧氏體錳 |
Steel Castings, Austenitic Manganese |
| ASTM A 131/A 131M-2001 |
海船用結構鋼的標準規范 |
Standard Specification for Structural Steel for Ships |
| ASTM A 132-1989 |
鉬鐵合金 |
Ferromolybdenum |
| ASTM A 134-1996 |
電熔(電弧)焊鋼管(NPS為16英寸和16英寸以上) |
Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and over) |
| ASTM A 135-2001 |
電阻焊鋼管標準規范 |
Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 139-2000 |
電熔(電弧)焊鋼管(4英寸以上的)標準規范 |
Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) |
| ASTM A 143-2001 |
熱浸鍍鋅結構鋼制品防脆裂措施和探測脆裂程序的標準實施規范 |
Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement |
| ASTM A 144-1973 |
鎢鐵合金 |
Ferrotungsten |
| ASTM A 146-1964 |
氧化鉬制品 |
Molybdenum Oxide Products |
| ASTM A 148/A 148M-2001 |
結構用高強度鋼鑄件標準規范 |
Standard Specification for Steel Castings, High Strength, for Structural Purposes |
| ASTM A 153/A 153M-2001 |
鋼鐵制金屬構件上鍍鋅層(熱浸)標準規范 |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
| ASTM A 153/A 153Ma-2001 |
鋼鐵制金屬構件上鍍鋅層(熱浸)標準規范 |
Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware |
| ASTM A 159-1983 |
汽車用灰鐵鑄件 |
Automotive Gray Iron Castings |
| ASTM A 161-1994 |
煉油廠用無縫低碳鋼與碳鉬鋼蒸餾管 |
Seamless Low-Carbon and Carbon-Molybdenum Steel Still Tubes for Refinery Service |
| ASTM A 167-1999 |
不銹和耐熱鉻鎳鋼板、薄鋼板及帶材的規范 |
Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet and Strip |
| ASTM A 176-1999 |
不銹和耐熱鉻鋼板、薄鋼板及帶材的規范 |
Stainless and Heat-Resisting Chromium Steel Plate, Sheet and Strip |
| ASTM A 178/A 178M-1995 |
鍋爐用電阻焊接碳素鋼和碳錳鋼管 |
Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler Tubes |
| ASTM A 179/A 179M-1990 |
熱交換器和冷凝器用無縫冷拉低碳鋼管 |
Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
| ASTM A 181/A 181M-1995 |
普通鍛制碳素鋼管的規格 |
Forgings, Carbon Steel for General-Purpose Piping |
| ASTM A 182/A 182M-2001 |
高溫下使用的鍛制或軋制的合金鋼管法蘭、鍛制管件、閥門及零件的標準規范 |
Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 182/A 182Ma-2001 |
高溫設備用鍛制或軋制合金鋼管法蘭、鍛制管件、閥門及零件的標準規范 |
Standard Specification for Forged or Rolled Alloy-Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service |
| ASTM A 183-1998 |
鋼軌用碳素鋼螺栓和螺母 |
Carbon Steel Track Bolts and Nuts |
| ASTM A 184/A 184M-2001 |
混凝土加筋用變形鋼筋編織網的標準規范 |
Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement |
| ASTM A 185-2001 |
混凝土用焊接無節鋼絲鋼筋的標準規范 |
Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete |
| ASTM A 192/A 192M-1991 |
高壓用無縫碳素鋼鍋爐管 |
Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
| ASTM A 193/A 193M-2000 |
高溫設備用合金鋼和不銹鋼螺栓材料的標準規范 |
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service |
| ASTM A 193/A 193Mb-2001 |
高溫設備用合金鋼和不銹鋼螺栓材料的標準規范 |
Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service |
| ASTM A 194/A 194M-2000 |
高壓設備或高溫設備或高壓高溫設備的螺栓用碳素鋼與合金鋼螺母的標準規范 |
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both |
| ASTM A 194/A 194Ma-2001 |
高壓設備或高溫設備或高壓高溫設備的螺栓用碳素鋼與合金鋼螺母的標準規范 |
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both |
| ASTM A 197-1987 |
化鐵爐用可鍛鑄鐵 |
Cupola Malleable Iron |
| ASTM A 197/A 197M-2000 |
化鐵爐可鍛鑄鐵標準規范 |
Standard Specification for Cupola Malleable Iron |
| ASTM A 197M-1987 |
化鐵爐用可鍛鑄鐵(米制) |
Cupola Malleable Iron (Metric) |
| ASTM A 2-1990 |
普通型,帶槽和防護型碳素工字鋼軌 |
Carbon Steel Girder Rails of Plain, Grooved and Guard Types |
| ASTM A 20/A 20M-2001 |
壓力容器用鋼板一般要求的標準規范 |
Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| ASTM A 20/A 20Mb-2001 |
壓力容器用鋼板一般要求的標準規范 |
Standard Specification for General Requirements for Steel Plates for Pressure Vessels |
| ASTM A 200-1994 |
煉油廠用無縫中級合金鋼蒸餾管 |
Seamless Intermediate Alloy-Steel Still Tubes for Refinery Service |
| ASTM A 202/A 202M-1993 |
壓力容器用鉻錳硅合金鋼板 |
Pressure Vessel Plates, Alloy Steel, Chromium-Manganese-Silicon |
| ASTM A 203/A 203M-1997 |
壓力容器用鎳合金鋼板 |
Pressure Vessel Plates, Alloy Steel, Nickel |
| ASTM A 204/A 204M-1993 |
壓力容器用鉬合金鋼板 |
Pressure Vessel Plates, Alloy Steel, Molybdenum |
| ASTM A 209/A 209M-1998 |
無縫碳鉬合金鋼鍋爐和超熱管規范 |
Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes |
| ASTM A 21-1994 |
鐵路用未經熱處理和經熱處理的碳素鋼軸 |
Carbon Steel Axles, Non-Heat-Treated and Heat-Treated for Railway Use |
| ASTM A 210/A 210M-1996 |
鍋爐和過熱器用無縫中碳素管 |
Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
| ASTM A 213/A 213M-2001 |
鍋爐、過熱器和換熱器用無縫鐵素體和奧氏體合金鋼管的標準規范 |
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| ASTM A 213/A 213Ma-2001 |
鍋爐、過熱器和換熱器用無縫鐵素體和奧氏體合金鋼管的標準規范 |
Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes |
| ASTM A 214/A 214M-1996 |
熱交換器與冷凝器用電阻焊接碳素鋼管 |
Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
| ASTM A 216/A 216M-1993 |
高溫下使用的適合于熔焊的碳素鋼鑄件規格 |
Steel Castings, Carbon, Suitable for Fusion Welding for High Temperature Service |
| ASTM A 217/A 217M-2002 |
高溫設備受壓零件用合金鋼和馬氏體不銹鋼鑄件標準規范 |
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| ASTM A 220-1988 |
珠光體可鍛鐵 |
Pearlitic Malleable Iron |
| ASTM A 220/A 220M-1999 |
珠光體可鍛鑄鐵 |
Pearlitic Malleable Iron |
| ASTM A 220M-1988 |
珠光體可鍛鐵(米制) |
Pearlitic Malleable Iron (Metric) |
| ASTM A 225/A 225M-1993 |
壓力容器用錳礬鎳合金鋼板 |
Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com