標準號 |
中文名稱 |
英文名稱 |
| ASTM F 1125-1987 |
打印系統中成象質量術語 |
Terminology of Image Quality in Impact Printing Systems |
| ASTM F 1126-1997 |
食品電切刀 |
Food Cutters (Electric) |
| ASTM F 1127-1988 |
危險品泄漏緊急治理人員設置封鎖線 |
Containment by Emergency Response Personnel of Hazardous Material Spills |
| ASTM F 1128-1988 |
用鹽沖洗法作透明塑料和表層的抗腐蝕性的試驗方法 |
Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using Salt Impingement Method |
| ASTM F 1129-1988 |
用含水泡沫控制從不溶混合揮發性液體中產生的蒸氣危害 |
Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids |
| ASTM F 1130-1999 |
船涂覆系統檢驗的標準實施規程 |
Standard Practice for Inspecting the Coating System of a Ship |
| ASTM F 1134-1994 |
船用電動機和發電機絕緣電阻監測器 |
Insulation Resistance Monitor for Shipboard Electrical Motors and Generators |
| ASTM F 1135-1999 |
緊固件用鉻酸鎘或鋅有機防蝕鍍層標準規范 |
Standard Specification for Cadmium or Zinc Chromate Organic Corrosion Protective Coating for Fasteners |
| ASTM F 1136-1988 |
緊固件用鉻或鋅防蝕鍍層 |
Chromium/Zinc Corrosion Protective Coatings for Fasteners |
| ASTM F 1137-1988 |
緊固件用磷酸鹽/油和磷酸鹽/有機防蝕鍍層 |
Phosphate/Oil and Phosphate/Organic Corrosion Protective Coatings for Fasteners |
| ASTM F 1138-1998 |
機械連接擋濺板 |
Spray Shields for Mechanical Joints |
| ASTM F 1239-2002 |
通過測量晶隙氧還原表征硅片氧沉淀的標準試驗方法 |
Standard Test Methods for Oxygen Precipitation Characterization of Silicon Wafers by Measurement of Interstitial Oxygen Reduction |
| ASTM F 1240-1989 |
鞋靴在有不同外來雜質界面的通道表面上的防滑性測量分類結果 |
Categorizing Results of Footwear Slip Resistant Measurements on Walkway Surfaces with an Interface of Various Foreign Substances |
| ASTM F 1241-1995 |
硅片生產工藝的名詞術語 |
Terminology of Silicon Technology |
| ASTM F 1242-1996 |
帶管頭和不帶管頭的氣管導管 |
Cuffed and Uncuffed Tracheal Tubes |
| ASTM F 1243-1989 |
氣管導管連接件 |
Tracheal Tube Connectors |
| ASTM F 1337-1991 |
海船和海洋系統、設備用人體工效要求 |
Human Engineering Program Requirements for Ships and Marine Systems, Equipment and Facilities |
| ASTM F 1338-1991 |
船用主動力中速柴油發動機覆蓋性能和機組最小工作范圍 |
Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly |
| ASTM F 1339-1992 |
急救醫療服務系統的組織和運作 |
Organization and Operation of Emergency Medical Services Systems |
| ASTM F 134-1985 |
用氦質譜儀檢漏器測定電子件密封性的試驗方法 |
Test Methods for Determining Hermeticity of Electron Devices with a Helium Mass Spectrometer Leak Detector |
| ASTM F 1341-1999 |
外科植入應用的非金屬鈦絲的標準規范 |
Standard Specification for Unalloyed Titanium Wire for Surgical Implant Applications |
| ASTM F 1342-1991 |
防護服裝耐穿刺能力的測試方法 |
Test Method for Protective Clothing Material Resistance to Puncture |
| ASTM F 1343-1991 |
麻醉設備.麻醉氣體凈化系統 |
Anesthetic Equipment - Scavenging Systems for Anesthetic Gases |
| ASTM F 1344-1993 |
橡膠地板磚 |
Rubber Floor Tile |
| ASTM F 1345-1996 |
鋅-5%鋁-鈰合金涂覆鋼連接鏈環欄柵結構 |
Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 152-1995 |
非金屬墊料抗拉試驗的測試方法 |
Test Methods for Tension Testing of Nonmetallic Gasket Materials |
| ASTM F 1520-1994 |
膠片暗盒和織帶盒傳動轉矩測定的標準試驗方法 |
Standard Test Method for Determining the Drive Torque for Film and Fabric Ribbon Cartridges |
| ASTM F 1521-1996 |
爐灶輕油性能標準試驗方法 |
Standard Test Methods for Performance of Range Tops |
| ASTM F 1584-1995 |
事故查找過程中建筑物標志標準實用規程 |
Standard Practice for Marking Buildings During Disaster Search Operations |
| ASTM F 1585-2000 |
醫用多孔性隔板包裝盒完整性試驗的標準導則 |
Standard Guide for Integrity Testing of Porous Barrier Medical Packages |
| ASTM F 1586-2002 |
外科植入物用鍛制氮加強的21鉻10鎳3錳2.5鉬不銹鋼棒(UNS S31675)標準規范 |
Standard Specification for Wrought Nitrogen Strengthened 21 Chromium - 10 Nickel - 3 Manganese - 2.5 Molybdenum Stainless Steel Bar for Surgical Implants (UNS S31675) |
| ASTM F 1587-1999 |
冰球守門員用頭、臉保護設備標準規范 |
Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders |
| ASTM F 1861-1998 |
彈性墻座的標準規范 |
Standard Specification for Resilient Wall Base |
| ASTM F 1862-1998 |
醫療面具抗人造血滲透的標準試驗方法(以已知速率固定量的水平投影) |
Standard Test Method for Resistance of Medical Face Masks to Penetration by Synthetic Blood (Horizontal Projection of Fixed Volume at a Known Velocity) |
| ASTM F 1863-1998 |
測量夜視鏡透明部件的加權過濾系數的標準試驗方法 |
Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts |
| ASTM F 1864-1998 |
光學和紅外透明材料及覆層的耐塵土腐蝕的標準試驗方法 |
Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings |
| ASTM F 1865-1998 |
交聯聚乙烯管用帶壓縮套筒的機械冷膨脹插入配件的標準規范 |
Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing |
| ASTM F 256-1994 |
含有18%或26%鉻的鉻鐵密封合金 |
Chromium-Iron Sealing Alloys with 18 or 26 Percent Chromium |
| ASTM F 26-1987 |
測定半導體單晶體取向的方法 |
Test Methods for Determining the Orientation of a Semiconductive Single Crystal |
| ASTM F 269-1960 |
鎢絲彎曲度的試驗方法 |
Test Method for Sag of Tungsten Wire |
| ASTM F 28-1991 |
光電導衰減測量法測定大塊鍺和硅中少數載流子壽命的方法 |
Test Methods for Minority-Carrier Lifetime in Bulk Geranium and Silicon by Measurement of Photoconductivity Decay |
| ASTM F 288-1996 |
電子器件和電燈用鎢絲 |
Tungsten Wire for Electron Devices and Lamps |
| IEEE/ASTM SI 10-1997 |
國際單位制使用的IEEE/ASTM SI-10標準:現代米制(取代ASTM E380和ANSI/IEEE Std 268-1992) |
IEEE/ASTM SI-10 Standard for Use of the International System of Units (SI):The Modern Metric System (Replaces ASTM E380 and ANSI/IEEE Std 268-1992) |
| ISO/ASTM 51204-2002 |
食品加工用γ輻射裝置中劑量測定的實施規程 |
(Practice for dosimetry in gamma irradiation facilities for food processing) |
| ISO/ASTM 51204-2004 |
食品加工用γ輻射裝置中劑量測定的實施規程 |
|
| ISO/ASTM 51205-2002 |
硫酸鈰和硫酸高鈰劑量測定系統的使用規程 |
(Practice for use of a ceric-cerous sulfate dosimetry system) |
| ISO/ASTM 51261-2002 |
輻射處理用劑量測定系統的選擇和校準指南 |
(Guide for selection and calibration of dosimetry systems for radiation processing) |
| ISO/ASTM 51275-2002 |
放射性鉻薄膜劑量測定系統使用規程 |
(Practice for use of a radiochromic film dosimetry system) |
| ISO/ASTM 51275-2004 |
放射性鉻薄膜劑量測定系統使用規程 |
|
| ISO/ASTM 51310-2002 |
放射性鉻光波導劑量測定系統使用規程 |
(Practice for use of a radiochromic optical waveguide dosimetry system) |
| ISO/ASTM 51310-2004 |
放射性鉻光波導劑量測定系統使用規程 |
|
| ISO/ASTM 51400-2003 |
高劑量照射劑量測定校準實驗室的特征和性能規程 |
(Practice for characterization and performance of a high-dose radiation dosimetry calibration laboratory) |
| ISO/ASTM 51400-2003 |
高劑量照射劑量測定校準實驗室的特征和性能規程 |
|
| ISO/ASTM 51401-2003 |
重鉻酸鹽劑量測定系統的使用規程 |
(Practice for use of a dichromate dosimetry system) |
| ISO/ASTM 51401-2003 |
重鉻酸鹽劑量測定系統的使用規程 |
|
| ISO/ASTM 51431-2002 |
食品加工用電子和韌致輻射輻照裝置中劑量測定的實施規程 |
(Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing) |
| ISO/ASTM 51538-2002 |
酒精-氯苯劑量測定系統使用規程 |
(Practice for use of the ethanol-chlorobenzene dosimetry system) |
| ISO/ASTM 51539-2002 |
輻射靈敏指示計使用指南 |
(Guide for use of radiation-sensitive indicators) |
| ISO/ASTM 51540-2002 |
放射性鉻液體劑量測定系統使用規程 |
(Practice for use of a radiochromic liquid dosimetry system) |
| ISO/ASTM 51540-2004 |
放射性鉻液體劑量測定系統使用規程 |
|
| ISO/ASTM 51607-2002 |
丙氨酸-EPR劑量測定系統實施規程 |
(Practice for use of the alanine-EPR dosimetry system) |
| ISO/ASTM 51607-2004 |
丙氨酸-EPR劑量測定系統的使用規程 |
|
| ISO/ASTM 51608-2002 |
輻射加工用X射線(韌致輻射)設備中放射劑量測定實施規程 |
(Practice for dosimetry in X-ray (bremsstrahlung) facility for radiation processing) |
| ISO/ASTM 51631-2003 |
電子束劑量測量和劑量?jī)x標定用測熱計量系統的使用規程 |
(Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations) |
| ISO/ASTM 51631-2003 |
電子束劑量測量和劑量?jī)x標定用測熱計量系統的使用規程 |
|
| ISO/ASTM 51649-2002 |
在300 keV 和25 MeV 能量之間輻射加工用電子束設備中劑量測定的實施規程 |
(Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV) |
| ISO/ASTM 51650-2002 |
醋酸纖維素劑量測定系統使用規程 |
(Practice for use of cellulose acetate dosimetry systems) |
| ISO/ASTM 51702-2002 |
輻射加工用γ輻照裝置中劑量測定的實施規程 |
(Practice for dosimetry in a gamma irradiation facility for radiation processing) |
| ISO/ASTM 51702-2004 |
輻射加工用γ輻射裝置中劑量測定的實施規程 |
|
| ISO/ASTM 51707-2002 |
輻射加工的劑量測定中不確定度的估算指南 |
(Guide for estimating uncertainties in dosimetry for radiation processing) |
| ISO/ASTM 51818-2002 |
輻射加工的電子束設備中劑量測定的實施規程 |
(Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 KeV and 300 KeV) |
| ISO/ASTM 51900-2002 |
食品和農產品輻射研究中的劑量測定指南 |
(Guide for dosimetry in radiation research on food and agricultural products) |
| ISO/ASTM 51939-2002 |
血液照射劑量測定的實施規程 |
(Practice for blood irradiation dosimetry) |
| ISO/ASTM 51940-2002 |
不育計劃的昆蟲輻照劑量測定指南 |
(Guide for dosimetry for irradiation of insects for sterile release programs) |
| ISO/ASTM 51940-2004 |
無生殖力昆蟲釋放計劃的劑量測定指南 |
|
| ISO/ASTM 51956-2002 |
輻射加工用熱致發光劑量測定(TLD)系統使用規程 |
(Practice for use of thermoluminescence-dosimetry (TLD) systems for radiation processing) |
| ISO/ASTM 52116-2002 |
自帶的干式存儲γ射線輻照器的劑量測定實施規范 |
(Practice for dosimetry for a self-contained dry-storage gamma-ray irradiator) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com