標準號 |
中文名稱 |
英文名稱 |
| DIN EN 1019-1995 |
人員用水的化學處理.二氧化硫 |
(Chemicals used for treatment of water intended for human consumption - Sulfur dioxide; German version EN 1019:1995) |
| DIN EN 1020-2002 |
有風扇支持燃燒氣體和/或燃燒物質傳輸、凈熱輸入功率不超過300kW的空間加熱用非家用燃氣式強制對流空氣加熱 |
(Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, incorporating a fan to assist transportation of combustion air and/or combustion products (includes Amendment A1:2001); German version EN 102 |
| DIN EN 10200-1992 |
鋼鐵冶煉材料的化學分析.鋼中硼含量的測定.分光光度法 |
(Chemical analysis of ferrous materials; determination of boron in steel; spectrophotometric method; german version EN 10200:1991) |
| DIN EN 10202-2001 |
冷軋錫產品.電解錫板和電解鉻/氧化鉻涂層鋼 |
(Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel; German version EN 10202:2001) |
| DIN EN 10204-1995 |
冶金產品.檢驗文件型式 |
(Metallic products - Types of inspection documents (includes Amendment A1:1995); German version EN 10204:1991 + A1:1995) |
| DIN EN 10204-2005 |
冶金產品.檢驗文件的類型 |
|
| DIN EN 10205-1992 |
生產白鐵皮和電鍍鉻鋼板用冷軋薄鋼板卷 |
(Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel; german version EN 10205:1991) |
| DIN EN 10207-1997 |
簡單的壓力容器用鋼材.薄鋼板,帶鋼和棒鋼的交貨技術條件 |
(Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars (includes Amendment A1:1997); German version EN 10207:1991 + A1:1997) |
| DIN EN 10207-2005 |
簡單壓力容器用鋼.鋼板、帶材和棒材的交貨技術條件 |
|
| DIN EN 10208-1-1998 |
易燃液體或氣體用管道鋼管.交貨技術條件.第1部分:要求等級為A的管 |
(Steel pipes for pipe lines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A; German version EN 10208-1:1997) |
| DIN EN 10208-2-1996 |
易燃液體或氣體用管道鋼管.交貨技術條件.第2部分:要求等級為B的管 |
(Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirements class B; German version EN 10208-2:1996) |
| DIN EN 10209-1996 |
涂釉低碳鋼制冷軋扁平制品.交貨技術條件 |
(Cold rolled low carbon steel flat products for vitrious enamelling - Technical delivery conditions; German version EN 10209:1996) |
| DIN EN 1021-1-1994 |
家具.裝璜家具易燃性的評估.第1部分:火源:燃著的香煙 |
(Furniture; assessment of the ignitability of upholstered furniture; part 1: ignition source: smouldering cigarette (ISO 8191-1:1987, modified); German version EN 1021-1:1993) |
| DIN EN 1021-2-1994 |
家具.室內裝璜家具易燃性的評估.第2部分:火源:等同于火柴的煤氣火焰 |
(Furniture; assessment of the ignitability of upholstered furniture; part 2: ignition source: match flame equivalent (ISO 8191-2:1988, modified); German version EN 1021-2:1993) |
| DIN EN 10210-1-1994 |
非合金結構鋼和精粒結構鋼制的鋼構件用熱成型空心型件.第1部分:交貨技術要求 |
(Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 1: Technical delivery requirements; German version EN 10210-1:1994) |
| DIN EN 10210-2-1997 |
非合金和細晶粒結構鋼的熱精加工結構空心型材.第2部分:公差,尺寸和分段特性 |
(Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10210-2:1997) |
| DIN EN 10211-1996 |
鋼鐵材料的化學分析.鋼和鐵中鈦含量測定.火焰原子吸收光譜測定法 |
(Chemical analysis of ferrous materials - Determination of titanium in steel and iron - Flame atomic absorption spectrometric method; German version EN 10211:1995) |
| DIN EN 10212-1995 |
生鐵材料的化學分析.用分光光度法測定鋼和鐵中的砷含量 |
(Chemical analysis of ferrous materials - Determination of arsenic in steel and iron - Spectrophotometric method; German version EN 10212:1995) |
| DIN EN 10213-1-1996 |
壓力容器用鑄鋼的交貨技術條件.第1部分:概述 |
(Technical delivery conditions for steel castings for pressure purposes - Part 1: General; German version EN 10213-1:1995) |
| DIN EN 10213-2-1996 |
壓力容器用鑄鋼的交貨技術條件.第2部分:室溫和高溫下使用的鋼種 |
(Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures; German version EN 10213-2:1995) |
| DIN EN 10213-3-1996 |
壓力容器用鑄鋼的交貨技術條件.第3部分:低溫下使用的鋼種 |
(Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures; German version EN 10213-3:1995) |
| DIN EN 10213-4-1996 |
壓力容器用鑄鋼的交貨技術條件.第4部分:奧氏體和奧氏體鐵素鋼種 |
(Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades; German version EN 10213-4:1995) |
| DIN EN 10214-1995 |
連續熱浸鍍調質帶鋅鋁覆層的鋼帶和薄板.交貨技術條件 |
(Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions; German version EN 10214:1995) |
| DIN EN 10215-1995 |
連續熱浸鍍調質帶鋁鋅覆層的鋼帶和薄板.交貨技術條件 |
(Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions; German version EN 10215:1995) |
| DIN EN 10216-1-2002 |
壓力載荷用無縫鋼管.交貨技術條件.第1部分:特定室溫特性的非合金鋼管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10216-1:2002) |
| DIN EN 10216-1-2004 |
壓力載荷用無縫鋼管.交貨技術條件.第1部分:特定室溫特性的非合金鋼管 |
|
| DIN EN 10216-2-2002 |
壓力載荷用無縫鋼管.交貨技術條件.第2部分:具有較高溫度下規定性能的非合金和合金鋼管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10216-2:2002) |
| DIN EN 10216-2-2004 |
壓力載荷用無縫鋼管.交貨技術條件.第2部分:帶特定高溫性能的非合金和合金鋼管 |
|
| DIN EN 10216-3-2002 |
壓力載荷用無縫鋼管.交貨技術條件.第3部分:細粒合金鋼管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10216-3:2002) |
| DIN EN 10216-3-2004 |
壓力載荷用無縫鋼管.交貨技術條件.第3部分:合金細粒鋼管 |
|
| DIN EN 10216-4-2002 |
壓力載荷用無縫鋼管.交貨技術條件.第4部分:有低溫特性的非合金和合金鋼管 |
(Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties; German version EN 10216-4:2002) |
| DIN EN 10216-4-2004 |
壓力載荷用無縫鋼管.交貨技術條件.第4部分:帶特定低溫性能的非合金和合金鋼管 |
|
| DIN EN 10216-5-2004 |
壓力用途無縫鋼管.交貨技術條件.第5部分:不銹鋼管 |
|
| DIN EN 10217-1-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第1部分:具有室溫下規定性能的非合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties; German version EN 10217-1:2002) |
| DIN EN 10217-2-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第2部分:具有較高溫度下規定性能的電焊非合金和合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-2:2002) |
| DIN EN 10217-3-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第3部分:細粒合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes; German version EN 10217-3:2002) |
| DIN EN 10217-4-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第4部分:具有低溫下規定性能的電焊非合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-4:2002) |
| DIN EN 10217-5-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第5部分:具有較高溫度下規定性能的埋弧焊接非合金和合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties; German version EN 10217-5:2002) |
| DIN EN 10217-6-2002 |
壓力載荷用焊接鋼管.交貨技術條件.第6部分:具有低溫下規定性能的埋弧焊接非合金鋼管 |
(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties; German version EN 10217-6:2002) |
| DIN EN 10217-7-2005 |
壓力用途焊接鋼管.交貨技術條件.第7部分:不銹鋼管 |
|
| DIN EN 10217-7-2005 |
壓力用途焊接鋼管.交貨技術條件.第7部分:不銹鋼管 |
|
| DIN EN 10218-1-1994 |
鋼絲和線材產品.概述.第1部分:檢驗方法 |
(Steel wire and wire products; general; part 1: test methods; German version EN 10218-1:1994) |
| DIN EN 10218-2-1996 |
鋼絲和線材產品.概述.第2部分:線材尺寸和公差 |
(Steel wire and wire products - General - Part 2: Wire dimensions and tolerances; German version EN 10218:1996) |
| DIN EN 10219-1-1997 |
非合金結構鋼和細晶粒結構鋼的冷成形結構空心型材.第1部分:交貨技術要求 |
(Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirements; German version EN 10219-1:1997) |
| DIN EN 10219-2-1997 |
非合金結構鋼和細晶粒結構鋼的冷成形結構空心型材.第2部分:公差,尺寸和分段性能 |
(Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties; German version EN 10219-2:1997) |
| DIN EN 1022-1997 |
居室家具.可就坐的家具.穩定性測試 |
(Domestic furniture - Seatings - Determination of stability; German version EN 1022:1996) |
| DIN EN 1022-2005 |
居室家具.座椅.穩定性測定 |
|
| DIN EN 10220-2003 |
無縫鋼管.單位長度尺寸重量通用表 |
(Seamless and welded steel tubes - General tables of dimensions and masses per unit length; German version EN 10220:2002) |
| DIN EN 10221-1996 |
熱軋鋼棒和線材的表面質量等級.交貨技術條件 |
(Surface quality classes for hot-rolled round bars and rods - Technical delivery conditions; German version EN 10221:1995) |
| DIN EN 10222-1-2002 |
壓力容器用鋼鍛件.第1部分:自由成型鍛件的一般要求 |
(Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (includes Amendment A1:2002); German version EN 10222-1:1998 + A1:2002) |
| DIN EN 10222-2-2000 |
壓力容器用鋼鍛件.第2部分:特定高溫性能的鐵素體和馬氏體鋼 |
(Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties (including corrigendum AC:2000); German version EN 10222-2:1999 + AC:2000) |
| DIN EN 10222-3-1999 |
壓力罐用鋼制鍛件.第3部分:低溫下有確定性能的鎳鋼 |
(Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties; German version EN 10222-3:1998) |
| DIN EN 10222-4-2001 |
壓力容器用鋼鍛件.第4部分:高彈限強度的可焊接細晶粒鋼 |
(Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength (includes Amendment A1:2001); German version EN 10222-4:1998 + A1:2001) |
| DIN EN 10222-5-2000 |
壓力容器用鋼鍛件.第5部分:馬氏體、奧氏體和奧氏體鐵素體不銹鋼 |
(Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels; German version EN 10222-5:1999) |
| DIN EN 10223-1-1998 |
柵欄用鋼絲和鋼絲制品.第1部分:鋅和鋅合金涂層的有刺鋼絲 |
(Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coated steel barbed wire; German version EN 10223-1:1997) |
| DIN EN 10223-2-1998 |
柵欄用鋼絲和鋼絲制品.第2部分:農業,隔離和柵欄用六角網目鋼絲編織物 |
(Steel wire and wire products for fences - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes; German version EN 10223-2:1997) |
| DIN EN 10223-2-2004 |
柵欄用鋼絲和鋼絲制品.第2部分:農用隔離和柵欄用六角形鋼絲網 |
|
| DIN EN 10223-3-1998 |
柵欄用鋼絲和鋼絲制品.第3部分:建筑用帶六角網目的鋼絲編織物 |
(Steel wire and wire products for fences - Part 3: Hexagonal steel wire netting for engineering purposes; German version EN 10223-3:1997) |
| DIN EN 10223-4-1998 |
柵欄用鋼絲和鋼絲制品.第4部分:柵欄用鋼絲焊接的格網 |
(Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing; German version EN 10223-4:1998) |
| DIN EN 10223-5-1998 |
柵欄用鋼絲和鋼絲制品.第5部分:柵欄用鋼絲鉸鏈網格和結節網格 |
(Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted mesh fencing; German version EN 10223-5:1998) |
| DIN EN 10223-6-1998 |
柵欄用鋼絲和鋼絲制品.第6部分:柵欄用正方形網目的鋼絲編織物 |
(Steel wire and wire products for fences - Part 6: Steel wire chain link fencing; German version EN 10223-6:1998) |
| DIN EN 10223-7-2003 |
欄柵用鋼絲和鋼絲制品.第7部分:欄柵用焊接鋼絲板條 |
(Steel wire and wire products for fences - Part 7: Steel wire welded panels for fencing; German version EN 10223-7:2002) |
| DIN EN 10224-2005 |
水和其他水成液輸送用非合金管和配件.交貨技術條件 |
|
| DIN EN 10225-2002 |
固定近海結構的可焊接結構鋼.技術交貨條件 |
(Weldable structural steels for fixed offshore structures - Technical delivery conditions; German version EN 10225:2001) |
| DIN EN 10226-1-2004 |
有壓力緊固連接件的管道螺紋.第1部分:錐形外螺紋和平行內螺紋.尺寸、公差和名稱與符號 |
|
| DIN EN 10226-3-2005 |
螺紋上有壓力密封接縫的管螺紋.第3部分:通過極限量規驗證 |
|
| DIN EN 10226-3-2005 |
螺紋上有壓力密封接縫的管螺紋.第3部分:通過極限量規驗證 |
|
| DIN EN 10228-1-1999 |
鋼鍛件的無損檢驗.第1部分:磁粉探傷 |
(Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection; German version EN 10228-1:1999) |
| DIN EN 10228-2-1998 |
鋼鍛件的無損檢驗.第2部分:滲透檢驗 |
(Non-destructive testing of steel forgings - Part 2: Penetrant testing; German version EN 10228-2:1998) |
| DIN EN 10228-3-1998 |
鋼制鍛件的無損檢驗.第3部分:鐵氧體鋼制或馬氏體鋼制鍛件的超聲波試驗 |
(Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings; German version EN 10228-3:1998) |
| DIN EN 10228-4-1999 |
鋼鍛件的無損檢驗.第4部分:奧氏和奧氏鐵氧體非合金鋼鍛件的超聲波檢驗 |
(Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings; German version EN 10228-4:1999) |
| DIN EN 10229-1998 |
評定鋼制品抗氫感應形成裂紋的性能(HIC) |
(Evaluation of resistance of steel products to hydrogen induced cracking (HIC); German version EN 10229:1998) |
| DIN EN 1023-1-1996 |
辦公室家具.隔斷墻板.第1部分:尺寸 |
(Office furniture - Screens - Part 1: Dimensions; German version EN 1023-1:1996) |
| DIN EN 1023-2-2001 |
辦公室家具.隔斷墻板.第2部分:機械安全要求 |
(Office furniture - Screens - Part 2: Mechanical safety requirements; German version EN 1023-2:2000) |
| DIN EN 1023-3-2001 |
辦公室家具.隔斷墻板.第3部分:試驗方法 |
(Office furniture - Screens - Part 3: Test methods; German version EN 1023-3:2000) |
| DIN EN 10230-1-2000 |
鋼絲釘.第1部分:一般用途的散裝釘 |
(Steel wire nails - Part 1: Loose nails for general applications; German version EN 10230-1:1999) |
| DIN EN 10232-1994 |
金屬材料.管材(管截面).彎曲試驗 |
(Metallic materials; tube (in full section); bend test; German version EN 10232:1993) |
| DIN EN 10233-1994 |
金屬材料.管材.環形折曲試驗 |
(Metallic materials; tube; flattening test; German version EN 10233:1993) |
| DIN EN 10234-1994 |
金屬材料.管材.擴管試驗 |
(Metallic materials; tube; drift expanding test; German version EN 10234:1993) |
| DIN EN 10235-1994 |
金屬材料.管材.折緣試驗 |
(Metallic materials; tube; flanging test; German version EN 10235:1993) |
| DIN EN 10236-1994 |
金屬材料.管材.擴管試驗 |
(Metallic materials; tube; ring expanding test; German version EN 10236:1993) |
| DIN EN 10237-1994 |
金屬材料.管.環狀試樣拉力試驗. |
(Metallic materials; tube; ring tensile test; German version EN 10237:1993) |
| DIN EN 10238-1996 |
結構鋼制經自動噴射和自動涂層處理的產品 |
(Automatically blast-cleaned and automatically prefabrication primed structural steel products; German version EN 10238:1996) |
| DIN EN 1024-1997 |
不連續鋪設用粘土屋頂磚.幾何特性測定 |
(Clay roofing tiles for discontinous laying - Determination of geometric characteristics; German version EN 1024:1997) |
| DIN EN 10240-1998 |
鋼管用內部和/或外部防護涂層.通過在自動設備中熱浸鍍錫進行的涂層的規定 |
(Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants; German version EN 10240:1997) |
| DIN EN 10241-2000 |
螺紋鋼管 |
(Steel threaded pipe; German version EN 10241:2000) |
| DIN EN 10242-1995 |
可鍛鑄鐵制螺紋管件 |
(Threaded pipe fittings in malleable cast iron; German version EN 10242:1994) |
| DIN EN 10242/A1-1999 |
可鍛鑄鐵制螺紋管件.修正A1 |
(Threaded pipe fitting in malleable cast iron; Amendment A1; German version EN 10242:1994/A1:1999) |
| DIN EN 10242/A2-2003 |
可鍛鑄鐵制螺紋管件.修正A2 |
(Threaded pipe fitting in malleable cast iron; Amendment A2; German version EN 10242:1994/A2:2003) |
| DIN EN 10243-1 Berichtigung 1-2005 |
鋼模鍛件.尺寸公差.第1部分:落錘鍛造件和垂直壓力鍛造件 |
|
| DIN EN 10243-1 Berichtigung 1-2005 |
鋼模鍛件.尺寸公差.第1部分:落錘鍛造件和垂直壓力鍛造件 |
|
| DIN EN 10243-1-2000 |
鋼熱模鍛件.尺寸公差.第1部分:落錘鍛造和垂直壓力鍛造 |
(Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings; German version EN 10243-1:1999) |
| DIN EN 10243-2 Berichtigung 1-2005 |
鋼模鍛件.尺寸公差.第2部分:在水平鍛造機上的頂鍛 |
|
| DIN EN 10243-2 Berichtigung 1-2005 |
鋼模鍛件.尺寸公差.第2部分:在水平鍛造機上的頂鍛 |
|
| DIN EN 10243-2-2000 |
鋼熱模鍛件.尺寸公差.第2部分:在水平鍛造機器上的頂鍛 |
(Steel die forgings - Tolerances on dimensions - Part 2: Upset forgings made on horizontal forging machines; German version EN 10243-2:1999) |
| DIN EN 10244-1-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第1部分:一般規則 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles; German version EN 10244-1:2001) |
| DIN EN 10244-2-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第2部分:鋅和鋅合金涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings; German version EN 10244-2:2001) |
| DIN EN 10244-3-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第3部分:鋁涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings; German version EN 10244-3:2001) |
| DIN EN 10244-4-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第4部分:錫涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings; German version EN 10244-4:2001) |
| DIN EN 10244-5-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第5部分:鎳涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings; German version EN 10244-5:2001) |
| DIN EN 10244-6-2001 |
鋼線和鋼線產品.鋼線上的有色金屬涂層.第6部分:銅、青銅和黃銅涂層 |
(Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings; German version EN 10244-6:2001) |
| DIN EN 10245-1-2001 |
鋼線和鋼線產品.鋼線上的有機涂層.第1部分:一般規則 |
(Steel wire and wire products - Organic coatings on wire - Part 1: General rules; German version EN 10245-1:2001) |
| DIN EN 10245-2-2001 |
鋼線和鋼線產品.鋼線上的有機涂層.第2部分:PVC涂層線 |
(Steel wire and wire products - Organic coatings on wire - Part 2: PVC coated wire; German version EN 10245-2:2001) |
| DIN EN 10245-3-2001 |
鋼絲和鋼絲產品.鋼絲上的有機涂層.第3部分:聚乙烯(PE)涂層絲 |
(Steel wire and wire products - Organic coatings on wire - Part 3: PE coated wire; German version EN 10245-3:2001) |
| DIN EN 10245-4-2003 |
鋼絲和鋼絲產品.鋼絲上的有機涂層.第4部分:聚酯涂層絲 |
(Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2003) |
| DIN EN 10246-1-1996 |
鋼管的無損檢測.第1部分:證明密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗 |
(Non-destructive testing of steel tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-1:1996) |
| DIN EN 10246-10 Berichtigung 1-2001 |
DINEN10246-10的勘誤 |
(Corrigenda to DIN EN 10246-10:2000-07) |
| DIN EN 10246-10-2000 |
鋼管的無損檢驗.第10部分:缺陷探測用自動熔融電弧焊接鋼管焊縫的放射線檢驗 |
(Non-destructive testing of steel tubes - Part 10: Radiographic testing of the weld seam of automatic fusion arc welded steel tubes for the detection of imperfections; German version EN 10246-10:2000) |
| DIN EN 10246-11-2000 |
鋼管的無損試驗.第11部分:表面缺陷探測用的無縫和焊接鋼管的液體滲透試驗 |
(Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections; German version EN 10246-11:2000) |
| DIN EN 10246-12-2000 |
鋼管的無損檢驗.第12部分:表面缺陷探測用無縫和焊接鐵磁鋼管的磁粉探傷 |
(Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections; German version EN 10246-12:2000) |
| DIN EN 10246-13-2000 |
鋼管的無損檢驗.第13部分:無縫和焊接(埋弧焊除外)鋼管的自動全周超聲波測厚檢驗 |
(Non-destructive testing of steel tubes - Part 13: Automatic full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc welded) steel tubes; German version EN 10246-13:2000) |
| DIN EN 10246-14-2000 |
鋼管的無損試驗.第14部分:無縫和焊接鋼管(埋頭焊接除外)疊層缺陷檢測的自動超聲波試驗.德文版本EN10246-14: |
(Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of laminar imperfections; German version EN 10246-14:1999) |
| DIN EN 10246-15-2000 |
鋼管的無損檢驗.第15部分:用于檢測層狀缺陷的焊接鋼管生產時用的帶材/板材的自動超聲波檢驗 |
(Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of laminar imperfections; German version EN 10246-15:2000) |
| DIN EN 10246-16-2000 |
鋼管的無損檢驗.第16部分:層狀缺陷檢測用焊接鋼管焊縫區域的自動超聲波檢驗 |
(Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections; German version EN 10246-16:2000) |
| DIN EN 10246-17-2000 |
鋼管的無損檢驗.第17部分:層狀缺陷檢測用無縫和焊接鋼管管端的超聲波檢驗 |
(Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfections; German version EN 10246-17:2000) |
| DIN EN 10246-18-2000 |
鋼管的無損檢驗.第18部分:層狀缺陷檢測用無縫和焊接鐵磁鋼管管端的磁粉探傷 |
(Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfections; German version EN 10246-18:2000) |
| DIN EN 10246-2-2000 |
鋼管的無損試驗.第2部分:證明液壓滲漏緊密性的無縫和焊接(埋弧焊接除外)的奧氏體和鐵素體/奧氏體鋼管的自動 |
(Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and ferritic-austenitic steel tubes for verification of hydraulic leak-tightness; German version EN 10246-2:20 |
| DIN EN 10246-3-2000 |
鋼管的無損試驗.第3部分:無縫和焊接鋼管(埋弧焊接除外)缺陷檢測的自動渦電流試驗.德文版本EN10246-3:1999 |
(Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections; German version EN 10246-3:1999) |
| DIN EN 10246-4-2000 |
鋼管的無損檢驗.第4部分:橫向不完整性檢測用鐵磁無縫鋼管的自動全外圍磁換能器檢驗/磁漏檢驗 |
(Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfections; German version EN 10246-4:1999) |
| DIN EN 10246-5-2000 |
鋼管的無損檢驗.第5部分:縱向不完整性檢測用鐵磁無縫和焊接(埋弧焊接除外)鋼管的自動全外圍磁換能器檢驗/磁 |
(Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections; German ver |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com