標準號 |
中文名稱 |
英文名稱 |
| DIN EN 13087-7 Berichtigung 1-2002 |
DINEN13087-7:2000-09的勘誤 |
(Corrigenda to DIN EN 13087-7:2000-9; German version EN 13087-7:2000/A1:2001) |
| DIN EN 13087-7-2000 |
防護頭盔.試驗方法.第7部分:耐火性 |
(Protective helmets - Test methods - Part 7: Flame resistance; German version EN 13087-7:2000) |
| DIN EN 13087-8-2001 |
防護頭盔.試驗方法.第8部分:電性能 |
(Protective helmets - Test methods - Part 8: Electrical properties; German version EN 13087-8:2000) |
| DIN EN 13088-2001 |
填充羽毛和絨毛的物品.測定填充產品的總重量和填充物重量的方法 |
(Manufactured articles filled with feather and down - Method for the determination of a filled product`s total mass and for the determination of the mass of the filling; German version EN 13088:2001) |
| DIN EN 13089-1999 |
登山設備.登冰器具.安全技術要求和檢驗方法 |
(Mountaineering equipment - Ice-tools - Safety requirements and test methods; German version EN 13089:1999) |
| DIN EN 1309-1-1997 |
圓木和鋸木.尺寸測量方法.第1部分:鋸木 |
(Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber; German version EN 1309-1:1997) |
| DIN EN 13090-2001 |
建筑物燃?xì)夤艿拦こ痰穆菁y接頭再密封的方法 |
(Means for resealing threaded joints of gas pipework in buildings; German version EN 13090:2000) |
| DIN EN 130900-1998 |
分規范.固定式聚苯乙烯薄膜絕緣的金屬箔直流電容器 |
(Sectional specification - Fixed polystyrene film dielectric metal foil d.c. capacitors; German version EN 130900:1997) |
| DIN EN 130901-1998 |
空白詳細規范.固定式聚苯乙烯薄膜絕緣的金屬箔直流電容器.評定級E |
(Blank detail specification - Fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level E; German version EN 130901:1997) |
| DIN EN 130902-1998 |
空白詳細規范.固定式聚苯乙烯薄膜絕緣的金屬箔直流電容器.評定級EZ |
(Blank detail specification - Fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level EZ; German version EN 130902:1997) |
| DIN EN 13091-2000 |
生物技術.過濾件和過濾組件的性能標準 |
(Biotechnology - Performance criteria for filter elements and filtration assemblies; German version EN 13091:1999) |
| DIN EN 13092-2000 |
生物技術.設備.抽樣和接種法指南 |
(Biotechnology - Equipment - Guidance on sampling and inoculation procedures; German version EN 13092:1999) |
| DIN EN 13094-2004 |
危險貨物運輸用容器.工作壓力不超過0.5巴的金屬容器.設計和建造 |
|
| DIN EN 13095-2000 |
生物技術.排氣系統性能標準 |
(Biotechnology - Performance criteria for off-gas systems; German version EN 13095:1999) |
| DIN EN 13096-2004 |
可運輸儲氣瓶.填充氣體到容器內的條件.單組分氣體 |
|
| DIN EN 13098-2001 |
工作場所的空氣.空氣中微生物和內毒素的測定導則 |
(Workplace atmospheres - Guidelines for measurement of airborne microorganisms and endotoxin; German version EN 13098:2000) |
| DIN EN 13099-2004 |
可運輸儲氣瓶.填充氣體混合物到容器內的條件 |
|
| DIN EN 131-1-1993 |
梯子.名稱、型式、功能尺寸 |
(Ladders; terms, types, functional sizes; German version EN 131-1:1993) |
| DIN EN 131-2-1993 |
梯子.要求、檢驗、標識 |
(Ladders; requirements, testing, marking; German version EN 131-2:1993) |
| DIN EN 1310-1997 |
圓木和鋸木.特性測定法 |
(Round and sawn timber - Method of measurement of features; German version EN 1310:1997) |
| DIN EN 13100-1-2000 |
熱塑性半成品焊接接頭的無損檢驗.第1部分:外觀檢驗 |
(Non destructive testing of welded joints of thermoplastics semi-finished products - Part 1: Visual examination; German version EN 13100-1:1999) |
| DIN EN 13100-2-2005 |
熱塑性半成品焊接接頭的無損檢驗.第2部分:X射線照相檢驗 |
|
| DIN EN 13100-3-2005 |
熱塑性半成品焊接接頭的無損檢驗.第3部分:超聲檢驗 |
|
| DIN EN 13101-2003 |
地下人入口處階梯.要求、標記、試驗和合格評定 |
(Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity; German version EN 13101:2002) |
| DIN EN 13103 Berichtigung 1-2003 |
DINEN13103-2002的技術勘誤 |
(Corrigenda to DIN EN 13103:2002-02) |
| DIN EN 13103-2002 |
鐵路設施.輪副和行車機構.非動力軸.設計方法 |
(Railway applications - Wheelsets and bogies - Non-powered axles; Design method; German version EN 13103:2001) |
| DIN EN 13104 Berichtigung 1-2003 |
DINEN13104-2002的技術勘誤 |
(Corrigenda to DIN EN 13104:2002-02) |
| DIN EN 13104-2002 |
鐵路設施.輪副和行車機構.動力軸.設計方法 |
(Railway applications - Wheelsets and bogies - Powered axles; Design method; German version EN 13104:2001) |
| DIN EN 13107-2005 |
載人用索道裝置的安全要求.土木工程建筑 |
|
| DIN EN 13109-2003 |
液化石油氣罐.處置 |
(LPG tanks - Disposal; German version EN 13109:2002) |
| DIN EN 1311-1997 |
圓木和鋸木.病蟲害侵襲測定法 |
(Round and sawn timber - Method of measurement of biological degrade; German version EN 1311:1997) |
| DIN EN 13110-2003 |
液化石油氣用(LPG)可運輸可填充焊接鋁瓶.設計和結構 |
(Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 13110:2002) |
| DIN EN 13111-2001 |
防水用軟板.非連續式屋頂和墻壁用襯墊.防水滲透性的測定 |
(Flexible sheets for waterproofing - Underlays for discontinuous roofing and wals - Determination of resistance to water penetration; German version EN 13111:2001) |
| DIN EN 13112-2003 |
制革機.片皮機和帶式刀剪切機的安全要求 |
(Tannery machines - Splitting and bandknife shearing machines - Safety requirements; German version EN 13112:2002) |
| DIN EN 13113-2003 |
制革機.膠滾涂層機的安全要求 |
(Tannery machines - Roller coating machines - Safety requirements; German version EN 13113:2002) |
| DIN EN 13114-2003 |
制革機.旋轉加工器具的安全要求 |
(Tannery machines - Rotating process vessels - Safety requirements; German version EN 13114:2002) |
| DIN EN 13115-2001 |
窗.機械特性的分類.壓,扭和操縱力 |
(Windows - Classification of mechanical properties - Racking, torsion and operating forces; German version EN 13115:2001) |
| DIN EN 13116-2001 |
幕墻.對風負載的抗性.性能要求 |
(Curtain walling - Resistance to wind load - Performance requirements; German version EN 13116:2001) |
| DIN EN 13117-1-2000 |
運輸包裝.可重復使用的剛性塑料配送箱.第1部分:通用配送箱 |
(Transport packaging - Reusable, rigid plastics distribution boxes - Part 1: General purpose application; German version EN 13117-1:2000) |
| DIN EN 13117-2-2000 |
運輸包裝.可重復使用的剛性塑料配送箱.第2部分:試驗的通用規范 |
(Transport packaging - Reusable, rigid plastics distribution boxes - Part 2: General specifications for testing; German version EN 13117-2:2000) |
| DIN EN 13118-2001 |
農業機械.馬鈴薯收獲設備.安全性 |
(Agricultural machinery - Potatoes harvesting equipment - Safety; German version EN 13118:2000) |
| DIN EN 1312-1997 |
圓木材和板木材.板木材的批量體積測定 |
(Round and sawn timber - Determination of the batch volume of sawn timber; German version EN 1312:1997) |
| DIN EN 13120-2004 |
內用百頁窗.包括安全的性能要求 |
|
| DIN EN 131200-2002 |
分規范.具有金屬化電極和聚丙烯介質的固定式電容器 |
(Sectional Specification - Fixed capacitors with metallized electrodes and polypropylene dielectric; German version EN 131200:2002) |
| DIN EN 131201-2002 |
空白詳細規范.具有金屬化電極和聚丙烯介質的固定式電容器 |
(Blank detail specification - Fixed capacitors with metallized electrodes and polypropylene dielectric; German version EN 131201:2002) |
| DIN EN 13121-2-2004 |
地上用GRP槽罐和容器.第2部分:復合材料.耐化學性 |
(GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resistance; German version EN 13121-2:2003) |
| DIN EN 13121-2-2004 |
地上用GRP槽罐和容器.第2部分:復合材料.耐化學性 |
|
| DIN EN 13123-1-2001 |
門窗和遮板.防爆.要求和分類.第1部分:沖擊管 |
(Windows, doors and shutters - Explosion resistance; Requirements and classification - Part 1: Shock tube; German version EN 13123-1:2001) |
| DIN EN 13123-2-2004 |
門窗和遮板.防爆.要求和分類.第2部分:范圍試驗 |
|
| DIN EN 13124-1-2001 |
門窗和遮板.防爆.試驗方法.第1部分:沖擊管 |
(Windows, doors and shutters - Explosion resistance; Test method - Part 1: Shock tube; German version EN 13124-1:2001) |
| DIN EN 13124-2-2004 |
門窗和遮板.防爆.要求和分類.第2部分:范圍試驗 |
|
| DIN EN 13125-2001 |
遮板和遮簾.補充的耐熱性.產品透氣率等級的規定 |
(Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product; German version EN 13125:2001) |
| DIN EN 13128-2001 |
機床工具的安全.安全.銑床(包括鏜孔機) |
(Safety of machine tools - Safety - Milling machines (including boring machines); German version EN 13128:2001) |
| DIN EN 13129-1-2003 |
鐵路設施.主干線鐵路車輛的空氣調節.第1部分:舒適度參數 |
(Railway applications - Air conditioning for main line rolling stock - Part 1: Comfort parameters; German version EN 13129-1:2002) |
| DIN EN 13129-2-2004 |
鐵路設施.主干線鐵路車輛的空氣調節.第2部分:類型試驗 |
|
| DIN EN 1313-1-1999 |
圓木材和板木材.允許偏差和優選尺寸.第1部份:針葉木板材 |
(Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber (including Amendment A1:1999); German version EN 1313-1:1997 + A1:1999) |
| DIN EN 1313-2-1999 |
圓木材和板木材.允許偏差和優選尺寸.第2部份:闊葉木板材 |
(Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber; German version EN 1313-2:1998) |
| DIN EN 13130-1-2004 |
接觸食品的材料和物品.受限制的塑料物質.第1部分:從塑料到食品和食品模擬物的特定遷移的試驗方法指南以及塑料中物質的測定和食品模擬物所處條件的選擇 |
|
| DIN EN 13130-2-2004 |
接觸食品的材料和物品.受限制的塑料物質.第2部分:食品模擬物中對苯二酸含量的測定 |
|
| DIN EN 13130-3-2004 |
接觸食品的材料和物品.受限制的塑料物質.第3部分:食品和食品模擬物中丙烯腈含量的測定 |
|
| DIN EN 13130-4-2004 |
接觸食品的材料和物品.受限制的塑料物質.第4部分:塑料中1,3-丁二烯含量的測定 |
|
| DIN EN 13130-5-2004 |
接觸食品的材料和物品.受限制的塑料物質.第5部分:食品模擬物中1,1-二氯乙烯含量的測定 |
|
| DIN EN 13130-6-2004 |
接觸食品的材料和物品.受限制的塑料物質.第6部分:塑料中1,1-二氯乙烯含量的測定 |
|
| DIN EN 13130-7-2004 |
接觸食品的材料和物品.受限制的塑料物質.第7部分:食品模擬物中單乙二醇和二甘醇含量的測定 |
|
| DIN EN 13130-8-2004 |
接觸食品的材料和物品.受限制的塑料物質.第8部分:塑料中異氰酸酯含量的測定 |
|
| DIN EN 13131-2000 |
液化石油產品.鎳和釩含量的測定.原子吸收分光光度測定法 |
(Liquid petroleum products - Determination of nickel and vanadium content - Atomic absorption spectrometric method; German version EN 13131:2000) |
| DIN EN 13132-2002 |
液體石油制品.無鉛汽油.用柱轉換氣相色譜法測定有機氧化合物和有機鍵合氧含量 |
(Liquid petroleum products - Unleaded petrol - Determination of organic oxygenate compounds and total organically bound oxygen content by gas chromatography using column switching; German version EN 13132:2000) |
| DIN EN 13133-2000 |
銅焊.釬焊工認可 |
(Brazing - Brazer approval; German version EN 13133:2000) |
| DIN EN 13134-2000 |
銅焊.程序認可 |
(Brazing - Procedure approval; German version EN 13134:2000) |
| DIN EN 13135-1-2004 |
起重機.安全.設計.設備要求.第1部分:電工設備 |
|
| DIN EN 13135-2-2005 |
起重機.設備.第2部分:非電工設備 |
|
| DIN EN 13136-2001 |
制冷系統和熱泵.壓力釋放裝置和相關管.計算方法.德文版本EN13136-2001 |
(Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation; German version EN 13136:2001) |
| DIN EN 13136-2005 |
制冷系統和熱泵.釋壓裝置和相關管道.計算方法 |
|
| DIN EN 13137-2001 |
廢棄物的特征記述.廢棄物、淤泥和沉積物中有機碳總量(TOC)的測定 |
(Characterization of waste - Determination of total organic carbon (TOC) in waste, sludges and sediments; German version EN 13137:2001) |
| DIN EN 13138-1-2003 |
教授游泳用浮力輔助設備.第1部分:可穿戴的浮力輔助設備的安全要求和試驗方法 |
(Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for buoyant aids to be worn; German version EN 13138-1:2003) |
| DIN EN 13138-2-2003 |
學習游泳用浮力輔助設備.第2部分:浮力輔助設備的安全要求和試驗方法 |
(Buoyant aids for swimming instruction - Part 2: Safety requirements and test methods for buoyant aids to be held; German version EN 13138-2:2002) |
| DIN EN 13139 Berichtigung 1-2004 |
對DIN EN 13139-2002的勘誤 |
|
| DIN EN 13139-2002 |
灰漿集料 |
(Aggregates for mortar; German version EN 13139:2002) |
| DIN EN 13140-2001 |
農業機械.糖用甜菜和飼料用甜菜收割設備.安全性 |
(Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety; German version EN 13140:2000) |
| DIN EN 13141-1-2004 |
建筑物的通風.住宅通風用組件/產品的性能試驗.第1部分:外部和內部安裝的空氣傳送設備 |
|
| DIN EN 13141-2-2004 |
建筑物的通風.住宅通風用組件/產品的性能試驗.第2部分:排氣和供氣終端裝置 |
|
| DIN EN 13141-3-2004 |
建筑物的通風.住宅通風用組件/產品的性能試驗.第3部分:住宅用排油煙機 |
|
| DIN EN 13141-4-2004 |
建筑物的通風.住宅用通風組件/產品的性能試驗.第4部分:住宅通風系統中使用的風扇 |
|
| DIN EN 13141-5-2005 |
建筑物通風.住宅通風用部件/產品的性能檢驗.通道和屋頂出口終端裝置 |
|
| DIN EN 13141-6-2004 |
建筑物的通風.住宅用通風組件/產品的性能試驗.第6部分:獨院住宅用排氣通風系統封殼 |
|
| DIN EN 13141-7-2004 |
建筑物的通風.住宅通風用組件/產品的性能試驗.第7部分:獨戶住宅機械通風系統用機械供氣和排氣通風裝置(包括熱回收)的性能檢驗 |
|
| DIN EN 13142-2004 |
建筑物的通風.住宅用通風組件/產品.必須和可選的性能特征 |
|
| DIN EN 13143-2003 |
金屬和其他無機涂層.孔隙率.孔隙測試的定義和約定 |
(Metallic and other inorganic coatings - Porosity - Definitions and conventions of the testing of pores; German version EN 13143:2003) |
| DIN EN 13144-2003 |
金屬和其他無機涂層.用抗拉試驗定量測量粘著性的方法 |
(Metallic and other inorganic coatings - Method for quantitative measurement of adhesion by tensile test; German version EN 13144:2003) |
| DIN EN 13145-2001 |
鐵路應用.軌道.枕木和障礙物 |
(Railway applications - Track - Wood sleepers and bearers; German version EN 13145:2001) |
| DIN EN 13146-1-2003 |
鐵路設施.軌道.緊固系統的試驗方法.第1部分:縱向軌道固定裝置的測定 |
(Railway applications - Track; Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint; German version EN 13146-1:2002) |
| DIN EN 13146-2-2003 |
鐵路設施.軌道.緊固系統的試驗方法.第2部分:扭轉阻力的測定 |
(Railway applications - Track; Test methods for fastening systems - Part 2: Determination of torsional resistance; German version EN 13146-2:2002) |
| DIN EN 13146-3-2003 |
鐵路設施.軌道.緊固系統的試驗方法.第3部分:沖擊荷載衰減的測定 |
(Railway applications - Track; Test methods for fastening systems - Part 3: Determination of attenuation of impact loads; German version EN 13146-3:2002) |
| DIN EN 13146-4-2003 |
鐵路設施.軌道.緊固系統的試驗方法.第4部分:重復荷載效應 |
(Railway applications - Track; Test methods for fastening systems - Part 4: Effect of repeated loading; German version EN 13146-4:2002) |
| DIN EN 13146-5-2003 |
鐵路設施.軌道.緊固系統的試驗方法.第5部分:電阻測定 |
(Railway applications - Track; Test methods for fastening systems - Part 5: Determination of electrical resistance; German version EN 13146-5:2002) |
| DIN EN 13146-6-2002 |
鐵路設施.軌道.緊固系統的試驗方法.第6部分:艱苦環境條件的影響 |
(Railway applications - Track; Test methods for fastening systems - Part 6: Effect of severe environmental conditions; German version EN 13146-6:2002) |
| DIN EN 13146-7-2003 |
鐵路設施.軌道.緊固系統的試驗方法.第7部分:定位力測定 |
(Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force; German version EN 13146-7:2002) |
| DIN EN 13146-8-2002 |
鐵路設施.軌道.緊固系統試驗方法.第8部分:使用中測試 |
(Railway applications; Track - Test methods for fastening systems - Part 8: In service testing; German version EN 13146-8:2002) |
| DIN EN 13147-2001 |
銅和銅合金.帶材鏜孔區域殘留應力的測定 |
(Copper and copper alloys - Determination of residual stresses in the border areas of slit strip; German version EN 13147:2001) |
| DIN EN 13148-2002 |
銅及銅合金.熱浸鍍錫帶 |
(Copper and copper alloys - Hot-dip tinned strip; German version EN 13148:2001) |
| DIN EN 13149-1-2004 |
公共交通.道路車輛調度和控制系統.第1部分:車上數據傳輸?shù)腤ORLDFIP定義和應用規則 |
|
| DIN EN 13149-2-2004 |
公共交通.道路車輛調度和控制系統.第2部分:WORLDFIP布線規范 |
|
| DIN EN 13149-4-2005 |
公共交通.道路車輛調度和控制系統.第4部分:CANopen傳輸總線的一般應用規則 |
|
| DIN EN 13149-5-2005 |
公共交通.道路車輛調度和控制系統.第5部分:CANopen布線規范 |
|
| DIN EN 1315-1-1997 |
尺寸分類.第1部份:落葉圓木 |
(Dimensional classification - Part 1: Hardwood round timber; German version EN 1315-1:1997) |
| DIN EN 1315-2-1997 |
尺寸分類.第2部份:針葉圓木 |
(Dimensional classification - Part 2: Softwood round timber; German version EN 1315-2:1997) |
| DIN EN 13150-2001 |
實驗室工作凳.安全要求和試驗方法 |
(Workbenches for laboratories - Safety requirements and test methods; German version EN 13150:2001) |
| DIN EN 13152-2002 |
自閉合式LPG氣瓶閥規范和試驗 |
(Specification and testing of LPG cylinder valves, self closing; German version EN 13152:2001) |
| DIN EN 13153-2002 |
手工操作的LPG氣瓶閥規范和試驗 |
(Specification and testing of LPG cylinder valves - Manually operated; German version EN 13153:2001) |
| DIN EN 13155-2004 |
起重機.非固定式荷載提升附屬裝置 |
(Cranes - Non-fixed load lifting attachments; German version EN 13155:2003) |
| DIN EN 13155-2004 |
起重機.非固定式荷載提升附屬裝置 |
|
| DIN EN 13157-2004 |
起重機.安全.手動提升設備 |
|
| DIN EN 13158-2000 |
防護服.騎馬者身體和肩的保護物和防護夾克.要求和試驗方法 |
(Protective clothing - Protective jackets, body and shoulder protectors for horse riders - Requirements and test methods; German version EN 13158:2000) |
| DIN EN 1316-1-1997 |
落葉圓木.質量分類.第1部分:橡樹和山毛櫸 |
(Hardwood round timber - Qualitative classification - Part 1: Oak and beech; German version EN 1316-1:1997) |
| DIN EN 1316-2-1997 |
落葉圓木.質量分類.第2部分:楊樹 |
(Hardwood round timber - Qualitative classification - Part 2: Poplar; German version EN 1316-2:1997) |
| DIN EN 1316-3-1997 |
飲用水處理用產品.三鉀磷酸鹽 |
(Hardwood round timber - Qualitative classification - Part 3: Ash and maples and sycamore; German version EN 1316-3:1997) |
| DIN EN 13160-1-2003 |
檢漏系統.第1部分:一般原則 |
(Leak detection systems - Part 1: General principles; German version EN 13160-1:2003) |
| DIN EN 13160-2-2003 |
檢漏系統.第2部分:壓力和真空系統 |
(Leak detection systems - Part 2: Pressure and vacuum systems; German version EN 13160-2:2003) |
| DIN EN 13160-5-2004 |
檢漏系統.第5部分:液面計檢漏系統 |
|
| DIN EN 13160-7-2003 |
檢漏系統.第7部分:填縫隙、防漏襯和防漏套的一般要求和試驗方法 |
(Leak detection systems - Part 7: General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets; German version EN 13160-7:2003) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com