標準號 |
中文名稱 |
英文名稱 |
| DIN EN 81-1/A2-2005 |
升降機施工和安裝的安全規則.第1部分:電動升降機.A2:機械和滑輪間隔 |
|
| DIN EN 81-2-2000 |
升降機施工和安裝的安全規則.第2部分:液壓升降機 |
(Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); German version EN 81-2:1998 + AC:1999) |
| DIN EN 81-2/A2-2005 |
升降機施工和安裝的安全規則.第2部分:液壓升降機.A2:機械和滑輪間隔 |
|
| DIN EN 81-3-2001 |
升降機施工和安裝的安全規則.第3部分:電動升降機和液壓升降機 |
(Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts; German version EN 81-3:2000) |
| DIN EN 81-70-2005 |
電梯建造和安裝的安全規則.客梯及客貨兩用梯的特殊應用.第70部分:電梯對包括殘疾人在內的所有人員的可達性 |
|
| DIN EN 81-71-2005 |
電梯建造和安裝的安全規則.客梯和客貨兩用梯的特殊應用.第71部分:耐破壞性電梯 |
|
| DIN EN 81-80-2004 |
電梯建造和安裝的安全準則.現有電梯.第80部分:提高現有載人電梯和客貨兩用電梯安全性的規則 |
(Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts; German version EN 81-80:2003) |
| DIN EN 81-80-2004 |
電梯建造和安裝的安全準則.現有電梯.第80部分:提高現有載人電梯和客貨兩用電梯安全性的規則 |
|
| DIN EN 810-1997 |
帶電驅動壓縮機的干躁器.功率,標記,功能要求和技術數據單 |
(Dehumidifiers with electrically driven compressors - Rating tests, marking, operational requirements and technical data sheet; German version EN 810:1997) |
| DIN EN 811-1996 |
機器的安全性.人體下肢可觸及的危險區域的安全距離 |
(Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs; German version EN 811:1996) |
| DIN EN 812-2002 |
工業用防撞帽(包括修改件A1) |
(Industrial bump caps (includes Amendment A1:2001); German version EN 812:1997 + A1:2001) |
| DIN EN 813-1997 |
防止墜落用的人員防護設備.座位上的安全帶 |
(Personal protective equipment for prevention of falls from a height - Sit harnesses; German version EN 813:1997) |
| DIN EN 814-1-1997 |
帶電驅動壓縮機的空調機和熱力泵.制冷.第1部分:名稱,定義和標識 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 1: Terms, definitions and designations; German version EN 814-1:1997) |
| DIN EN 814-2-1997 |
帶電驅動壓縮機的空調機和熱力泵.制冷.第2部分:符號指示的檢驗和要求 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 2: Testing and requirements for marking; German version EN 814-2:1997) |
| DIN EN 814-3-1997 |
帶電驅動壓縮機的空調機和熱力泵.制冷.第3部分:要求 |
(Air conditioners and heat pumps with electrically driven compressors - Cooling mode - Part 3: Requirements; German version EN 814-3:1997) |
| DIN EN 815-1996 |
無防護平巷掘進機和插入巖石的無鉆桿豎井鉆機的安全 |
(Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock; German version EN 815:1996) |
| DIN EN 815/A1-2005 |
巖石用無防護隧道鉆機和無桿鉆井機安全 |
|
| DIN EN 816-1997 |
衛生器具附件.自鎖附件PN10 |
(Sanitary tapware - Automatic shut-off valves PN 10; German version EN 816:1996) |
| DIN EN 817-1997 |
衛生設備管件.機械混合器(PN10).普通技術規范 |
(Sanitary tapware - Mechanical mixers (PN 10) - General technical specifications; German version EN 817:1997) |
| DIN EN 81714-2-1999 |
產品技術文件用圖形符號的設計.第2部分:包括相關目錄圖形符號及其交換要求的計算機適用的圖形符號規范 |
(Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange (IEC 817 |
| DIN EN 81714-3-2001 |
產品技術文件用圖形符號的設計.第3部分:連接節點、網絡及其編碼的分類 |
(Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding (IEC 81714-3:1998); German version EN 81714-3:2001) |
| DIN EN 818-1-1996 |
起重用短鏈條.安全性.第1部分:一般驗收條件 |
(Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance; German version EN 818-1:1996) |
| DIN EN 818-2-1996 |
起重用短環圓鋼鏈條.安全性.第2部分:質量等級8止檔鏈用中級公差圓鋼鏈條 |
(Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings, grade 8; German version EN 818-2:1996) |
| DIN EN 818-3-1999 |
起重用短環圓鋼鏈條.安全性.第3部分:用作止檔鏈條的中級公差的圓鋼鏈.質量等級4 |
(Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings; grade 4; German version EN 818-3:1999) |
| DIN EN 818-4-1996 |
起重用短環圓鋼鏈條.安全性.第4部分:質量等級8止檔鏈 |
(Short link chain for lifting purposes - Safety - Part 4: Chain slings, grade 8; German version EN 818-4:1996) |
| DIN EN 818-5-1999 |
起重用短環圓鋼鏈條.安全性.第5部分:止擋環.質量等級4 |
(Short link chain for lifting purposes - Safety - Part 5: Chain slings; grade 4; German version EN 818-5:1999) |
| DIN EN 818-6-2000 |
起重用短環圓鋼鏈條.安全性.第6部分:吊式鏈鎖.生產商提供的用于使用和維修的信息規范 |
(Short link chain for lifting purposes - Safety - Part 6: Chain slings; specification for information for use and maintenance to be provided by the manufacturer; German version EN 818-6:2000) |
| DIN EN 818-7-2002 |
升降用的短節鏈條的安全.第7部分:T等級(類型T、DAT和DT)、精密公差吊鏈 |
(Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, grade T (Types T, DAT and DT); German version EN 818-7:2002) |
| DIN EN 820-2-2003 |
高級工業陶瓷.整體陶瓷的試驗方法.熱機械特性.第1部分:自重變形的測定 |
(Advanced technical ceramics - Methods of test for monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation; German version EN 820-2:2003) |
| DIN EN 820-3-2004 |
高級工業陶瓷.塊體陶瓷的試驗方法.熱機械特性.第3部分:水淬火法測定耐熱沖擊性 |
|
| DIN EN 82045-1-2002 |
文獻管理.第1部分:原理和方法 |
(Document management - Part 1: Principles and methods (IEC 82045-1:2001); German version EN 82045-1:2001) |
| DIN EN 82045-2-2005 |
文件管理.第2部分:數據素和信息參考模型 |
|
| DIN EN 821-1-1995 |
高技術陶瓷.整體陶磁.單片陶瓷的熱物理特性.第1部分:熱膨脹的測定 |
(Advanced technical ceramics - Monolithic ceramics - Thermophysical properties - Part 1: Determination of thermal expansion; German version EN 821-1:1995) |
| DIN EN 821-2-1997 |
高技術陶瓷.整體陶磁.熱物理性能.第2部分:用激光閃光法(或熱能脈沖)測量導熱能力 |
(Advanced technical ceramics - Monolithic ceramics, thermo-physical properties - Part 2: Determination of thermal diffusity by the laser flash (or heat pulse) method; German version EN 821-2:1997) |
| DIN EN 822-1994 |
建筑物用熱絕緣產品.長度和寬度測定 |
(Thermal insulating products for building applications - Determination of length and width; German version EN 822:1994) |
| DIN EN 823-1994 |
建筑物用熱絕緣產品.厚度測定 |
(Thermal insulating products for building applications - Determination of thickness; German version EN 823:1994) |
| DIN EN 824-1994 |
建筑物用熱絕緣產品.矩形測定 |
(Thermal insulating products for building applications - Determination of squareness; German version EN 824:1994) |
| DIN EN 825-1994 |
建筑物用熱絕緣產品.平直性測定 |
(Thermal insulating products for building applications - Determination of flatness; German version EN 825:1994) |
| DIN EN 826-1996 |
建筑物用熱絕緣產品.壓力性能測定 |
(Thermal insulating products for building applications - Determination of compression behaviour; German version EN 826:1996) |
| DIN EN 827-1995 |
粘合劑.常規固體含量和恒定質量固體含量的測定 |
(Adhesives - Determination of conventional solids content and constant mass solids content; German version EN 827:1994) |
| DIN EN 828-1998 |
粘合劑.可濕性.固體表面接觸角度和臨界表面張力測量法測定 |
(Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface; German version EN 828:1997) |
| DIN EN 829-1996 |
實驗室條件下診斷的系統.醫學和生物試樣的傳送包裝.要求.檢驗 |
(In vitro diagnostic systems - Transport packages for medical and biological specimens - Requirements, test; German version EN 829:1996) |
| DIN EN 832-2003 |
建筑物的熱性能.供熱用能量需求量的計算.住宅建筑 |
(Thermal performance of building - Calculation of energy use for heating - Residential buildings (includes Corrigenda AC:2002); German version EN 832:1998 + AC:2002) |
| DIN EN 834-1994 |
室內采暖面積的消耗值推算用熱氣成本分配器.帶供電的裝置 |
(Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply; German version EN 834:1994) |
| DIN EN 835-1995 |
測定房間暖氣片損耗用的熱成本分配器.以蒸發原理為基礎的不帶電能源的器具 |
(Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without electrical energy supply based on the evaporation principle; German version EN 835:1994) |
| DIN EN 836-1997 |
園藝機具.電動草坪割草機.安全性 |
(Garden equipment - Powered lawnmowers - Safety; German version EN 836:1997) |
| DIN EN 836/A1-1998 |
園藝設備.電動剪草機.安全性 |
(Garden equipment - Powered lawnmowers - Safety; German version EN 836:1997/A1:1997) |
| DIN EN 836/A2-2001 |
園藝機具.電動剪草機.安全.修改件A2 |
(Garden equipment - Powered lawnmowers - Safety; Amendment A2; German version EN 836:1997/A2:2001) |
| DIN EN 836/A3-2004 |
園林設備.電動剪草機.安全 |
|
| DIN EN 837-1-1997 |
壓力測量?jī)x.第1部分:波登壓力測量?jī)x.尺寸,測量技術,要求和檢驗 |
(Pressure gauges - Part 1: Bourdon tube pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-1:1996) |
| DIN EN 837-2-1997 |
壓力測量?jī)x.第2部分:壓力測量?jī)x的選擇和安裝建議 |
(Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges; German version EN 837-2:1997) |
| DIN EN 837-3-1997 |
壓力測量?jī)x.第3部分:膜片和膜盒壓力測量?jī)x.尺寸,測量技術,要求和檢驗 |
(Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996) |
| DIN EN 838-1995 |
工作場地的大氣構成.煤氣和蒸汽測定用擴散收集器.要求.檢驗.標識 |
(Workplace atmospheres - Diffusive samplers for the determination of gases or vapours - Requirements and test methods; German version EN 838:1995) |
| DIN EN 84-1997 |
木材防腐劑.生物試驗前已處理木材的加速老化.沖洗極限 |
(Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure; German version EN 84:1997) |
| DIN EN 840-1-1997 |
移動式廢料收集箱.第1部分:梳齒形提升裝置用帶兩個輪子容積為80至390立升的收集箱.尺寸和外型設計 |
(Mobile waste containers - Part 1: Containers with 2 wheels with a capacity from 80 l to 390 l for comb lifting devices, dimensions and design; German version EN 840-1:1997) |
| DIN EN 840-1-2004 |
移動式廢料箱.第1部分:梳齒形提升裝置用容積最大為400L的兩輪箱.尺寸和設計 |
|
| DIN EN 840-2-1997 |
移動式廢料收集箱.第2部分:耳軸形或/和梳齒形提升裝置用帶4個輪子容積為500至1200立升的收集箱.尺寸和外型 |
(Mobile waste containers - Part 2: Containers with 4 wheels with a capacity from 500 l to 1200 l with flat lid(s), for trunnion and/or comb lifting devices, dimensions and design; German version EN 840-2:1997) |
| DIN EN 840-2-2004 |
移動式廢料收集箱.第2部分:樞軸和/或梳齒形提升裝置用帶平蓋的容積為1300L及以下的4輪收集箱.尺寸和設計 |
|
| DIN EN 840-3-1997 |
移動式廢料收集箱.第3部分:耳軸形或/和梳齒形提升裝置用帶4個輪子和移動蓋板容積為700至1300立升的收集箱. |
(Mobile waste containers - Part 3: Containers with 4 wheels with a capacity from 770 l to 1300 l with dome lid(s), for trunnion and/or comb lifting devices, dimensions and design; German version EN 840-3:1997) |
| DIN EN 840-3-2004 |
移動式廢料收集箱.第3部分:樞軸和/或梳齒形提升裝置用帶圓蓋的容積為1300L及以下的4輪收集箱.尺寸和設計 |
|
| DIN EN 840-4-1997 |
移動式廢料收集箱.第4部分:耳軸形或GB形或/和寬式梳齒形提升裝置用帶4個輪子和移動蓋板容積為700至1700立升 |
(Mobile waste containers - Part 4: Containers with 4 wheels with a capacity from 750 l to 1700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting devices, dimensions and design; German version EN 840-4:1997) |
| DIN EN 840-4-2004 |
移動式廢料收集箱.第4部分:寬樞軸或BG和/或?qū)捠猃X形提升裝置用帶平蓋的容積為1700L及以下的4輪收集箱.尺寸和設計 |
|
| DIN EN 840-5-1997 |
移動式廢料收集箱.第5部分:性能要求和檢驗方法 |
(Mobile waste containers - Part 5: Performance requirements and test methods; German version EN 840-5:1997) |
| DIN EN 840-5-2004 |
移動式廢料箱.第5部分:性能要求和試驗方法 |
|
| DIN EN 840-5/A1-2000 |
移動式廢料收集箱.第5部分:性能要求和試驗方法.修改件1 |
(Mobile waste containers - Part 5: Performance requirements and test methods; Amendment A1; German version EN 840-5:1997/A1:2000) |
| DIN EN 840-6-1997 |
移動式廢料收集箱.第6部分:安全及衛生要求 |
(Mobile waste containers - Part 6: Safety and health requirements; German version EN 840-6:1997) |
| DIN EN 840-6-2004 |
移動式廢料箱.第6部分:安全和健康要求 |
|
| DIN EN 840-6/A1-2000 |
移動式廢料收集箱.第6部分:安全和衛生要求.修改件A1 |
(Mobile waste containers - Part 6: Safety and health requirements; Amendment A1; German version EN 840-6:1997/A1:2000) |
| DIN EN 841-1996 |
條形碼.符號規范.格式說明 |
(Bar coding - Symbology specifications, format description; German version EN 841:1995) |
| DIN EN 842-1996 |
機器的安全性.光學危險信號.一般要求,設計和檢驗 |
(Safety of machinery - Visual danger signals - General requirements, design and testing; German version EN 842:1996) |
| DIN EN 843-1-1995 |
高技術陶瓷.整體陶磁.室溫下單片陶瓷的機械特性.第1部分:抗彎強度的測定 |
(Advanced technical ceramics - Monolithic ceramics - Mechanical properties at room temperature - Part 1: Determination of flexural strength; German version EN 843-1:1995) |
| DIN EN 844-1-1995 |
圓木和鋸木.術語.第1部分:圓木和鋸材通用一般術語 |
(Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber; German version EN 844-1:1995) |
| DIN EN 844-10-1998 |
圓木和鋸木.術語.第10部分:變色和真菌浸染的概念 |
(Round and sawn timber - Terminology - Part 10: Terms relating to stain and fungal attack; Trilingual version EN 844-10:1998) |
| DIN EN 844-11-1998 |
圓木和鋸木.術語.第11部分:和病蟲害相關的概念 |
(Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects; Trilingual version EN 844-11:1998) |
| DIN EN 844-12-2001 |
圓木和鋸材.術語.第12部分:附加術語和通用索引 |
(Round and sawn timber - Terminology - Part 12: Additional terms and general index; German version EN 844-12:2000) |
| DIN EN 844-2-1997 |
園木和鋸木.術語.第2部分:園木的一般概念 |
(Round and sawn timber - Terminology - Part 2: General terms relating to round timber; German version EN 844-2:1997) |
| DIN EN 844-3-1995 |
圓木和鋸木.術語.第3部分:鋸木的一般術語 |
(Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber; German version EN 844-3:1995) |
| DIN EN 844-4-1997 |
園木和鋸木.術語.第2部分:濕度的概念 |
(Round and sawn timber - Terminology - Part 4: Terms relating to moisture content; German version EN 844-4:1997) |
| DIN EN 844-5-1997 |
園木和鋸木.術語.第5部分:園木尺寸的概念 |
(Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber; German version EN 844-5:1997) |
| DIN EN 844-6-1997 |
圓木和鋸木.術語.第6部分:鋸木尺寸的概念 |
(Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber; German version EN 844-6:1997) |
| DIN EN 844-7-1997 |
圓木和鋸木.術語.第7部分:有關木材組織結構的術語 |
(Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber; German version EN 844-7:1997) |
| DIN EN 844-8-1997 |
圓木和鋸木.術語.第8部分:圓木特性的概念 |
(Round and sawn timber - Terminology - Part 8: Terms relating to features of round timber; German version EN 844-8:1997) |
| DIN EN 844-9-1997 |
圓木和鋸木.術語.第9部分:鋸木特性的概念 |
(Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber; German version EN 844-9:1997) |
| DIN EN 845-1-2003 |
砌體工程附屬件規范.第1部分:砌體連系桿、抗拉帶條、吊勾和托架 |
(Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets; German version EN 845-1:2003) |
| DIN EN 845-2-2003 |
砌體工程用附屬件規范.第2部分:過梁 |
(Specification for ancillary components for masonry - Part 2: Lintels; German version EN 845-2:2003) |
| DIN EN 845-3-2003 |
砌體附屬件規范.第3部分:鋼筋網底層接縫加筋 |
(Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork; German version EN 845-3:2003) |
| DIN EN 846-10-2000 |
磚石工程用輔助部件的試驗方法.第10部分:測定托架的載荷能力和加載變形特性 |
(Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets; German version EN 846-10:2000) |
| DIN EN 846-11-2000 |
磚石工程用輔助部件的試驗方法.第11部分:測定門窗過梁的尺寸和彎曲度 |
(Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels; German version EN 846-11:2000) |
| DIN EN 846-13-2001 |
磚石工程用輔助部件的試驗方法.第13部分:有機覆層的耐沖擊、抗磨損和耐腐蝕性測定 |
(Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings; German version EN 846-13:2001) |
| DIN EN 846-2-2000 |
磚石工程用輔助部件的試驗方法.第2部分:測定灰縫中預制底層接縫加筋的結合強度 |
(Methods of tests for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints; German version EN 846-2:2000) |
| DIN EN 846-3-2000 |
磚石工程用輔助部件的試驗方法.第3部分:測定預制底層接縫加筋中焊接的抗剪載荷能力 |
(Methods of tests for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement; German version EN 846-3:2000) |
| DIN EN 846-4-2002 |
磚石工程用輔助部件的試驗方法.第4部分:測定托架的載荷能力和加載變形特性.德文版EN846-4:2001 |
(Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps; German version EN 846-4:2001) |
| DIN EN 846-4-2005 |
圬工輔助部件的試驗方法.第4部分:固定夾板的負載容量和加載變形特性的測定 |
|
| DIN EN 846-5-2000 |
磚石工程用輔助部件的試驗方法.第5部分:測定墻拉桿的抗拉荷載和抗壓荷載能力及荷載位移特性(粗細相間沉積 |
(Methods of tests for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test); German version EN 846-5:2000) |
| DIN EN 846-6-2000 |
磚石工程用輔助部件的試驗方法.第6部分:測定墻拉桿的抗拉荷載和抗壓荷載能力及荷載位移特性(單端試驗) |
(Methods of tests for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test); German version EN 846-6:2000) |
| DIN EN 846-7-2000 |
磚石工程用輔助部件的試驗方法.第7部分:測定剪應拉桿和滑動拉桿的抗剪載荷能力及荷載位移特性(灰縫連接的 |
(Methods of tests for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couple test for mortar joint connections); German version EN 846-7:2000) |
| DIN EN 846-8-2000 |
磚石工程用輔助部件的試驗方法.第8部分:測定擱柵吊鉤的載荷能力和加載變形特性 |
(Methods of tests for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers; German version EN 846-8:2000) |
| DIN EN 846-9-2000 |
磚石工程用輔助部件的試驗方法.第9部分:測定門窗過梁的抗彎曲性和抗剪切性 |
(Methods of tests for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels; German version EN 846-9:2000) |
| DIN EN 847-1-1997 |
木材加工用機床刀具.安全性要求.第1部分:銑刀和刨刀.圓盤鋸片 |
(Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades; German version EN 847-1:1997) |
| DIN EN 847-1-2005 |
木工工具.安全要求.第1部分:銑刀和圓盤鋸片 |
|
| DIN EN 847-2-2003 |
木工加工用刀具.安全要求.第2部分:安裝在銑刀上的刀柄的要求 |
(Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools; German version EN 847-2:2001 + AC:2003) |
| DIN EN 847-3-2004 |
木工工具.安全性要求.第3部分:箝位設備 |
|
| DIN EN 848-1-1998 |
木材加工機械的安全性.用旋轉工具單面加工的銑床.第1部分:單軸垂直臺式銑床 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines; German version EN 848-1:1998) |
| DIN EN 848-1/A1-2001 |
木材加工機械的安全性.用旋轉工具單面加工的模壓機械.第1部分:單軸垂直模壓機械.修改件A1 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines; Amendment A1; German version EN 848-1:1998/A1:2000) |
| DIN EN 848-2-1998 |
木材加工機械的安全性.用旋轉工具單面加工的銑床.第2部分:帶手動進給/機動進給的單軸頂面銑床 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle handfed/integrated fed routing machines; German version EN 848-2:1998) |
| DIN EN 848-3-1999 |
木材加工機械的安全性.用旋轉工具單面加工的銑床.第3部分:數控(NC)鏜床和手動靠模銑床 |
(Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerical control (NC) boring machines and routing machines; German version EN 848-3:1999) |
| DIN EN 849-2002 |
可運輸?shù)臍馄?氣瓶閥門.規范和型式試驗 |
(Transportable gas cylinders - Cylinder valves - Specification and type testing (includes amendment A1:1999 + A2:2001); German Version EN 849:1996 + A1:1999 + A2:2001) |
| DIN EN 850-2001 |
可移動的燃?xì)馄?醫用定位銷轉位的卡箍式閥出口連接 |
(Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use (includes Amendment A1:2000); German version EN 850:1996 + A1:2000) |
| DIN EN 851-1995 |
鋁和鋁合金.生產廚房器具用圓片坯料和圓片預制材料.規范 |
(Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications; German version EN 851:1995) |
| DIN EN 853-1997 |
橡皮軟管和軟管組件.帶金屬絲編織層的液壓軟管.規范 |
(Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification; German version EN 853:1996) |
| DIN EN 854-1997 |
橡皮軟管和軟管組件.帶織物編織層的液壓軟管.規范 |
(Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification; German version EN 854:1996) |
| DIN EN 855-1997 |
塑料軟管和軟管組件.帶織物編織層的塑料液壓軟管.規范 |
(Plastic hoses and hose assemblies - Thermoplastics textile reinforced hydraulic type - Specification; German version EN 855:1996) |
| DIN EN 856-1997 |
橡皮軟管和軟管組件.帶金屬絲螺旋墊層的液壓軟管.規范 |
(Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification; German version EN 856:1996) |
| DIN EN 857-1997 |
橡皮軟管和軟管組件.帶金屬絲編織層的緊湊型液壓軟管.規范 |
(Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification; German version EN 857:1996) |
| DIN EN 858-1-2002 |
輕液體(如油和汽油)用分離器裝置.第1部分:產品設計、性能和試驗、標記和質量控制的原則 |
(Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control; German version EN 858-1:2002) |
| DIN EN 858-1-2005 |
輕液體(如油和汽油)用分離器裝置.第1部分:產品設計、性能和試驗、標記和質量控制的原則 |
|
| DIN EN 859-1997 |
木材加工機械的安全性.手動進給的精密刨床 |
(Safety of woodworking machines - Hand fed surface planing machines; German version EN 859:1997) |
| DIN EN 860-1997 |
木材加工機械的安全性.單面加工用厚度刨床 |
(Safety of woodworking machines - One side thickness planing machines; German version EN 860:1997) |
| DIN EN 861-1997 |
木材加工機械的安全性.平面刨床和厚度刨床 |
(Safety of woodworking machines - Surface planing and thicknessing machines; German version EN 861:1997) |
| DIN EN 862-2001 |
包裝.孩子不能打開的包裝.非藥物產品的非封閉包裝的要求和試驗過程.德文版本EN862:2001 |
(Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products; German version EN 862:2001) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com