標準號 |
中文名稱 |
英文名稱 |
| DIN EN 60118-0-1994 |
助聽器.第0部分:電聲特性的測量 |
(Hearing aids; part 0: measurement of electroacoustical characteristics (IEC 60118-0:1983 + IEC 118-0 AMD 1:1994); German version EN 60118-0:1993 + A1:1994) |
| DIN EN 60118-1-1999 |
助聽器.第1部分:帶感應線圈輸入的助聽器 |
(Hearing aids - Part 1: Hearing aids with induction pick-up coil input (IEC 60118-1:1995 + A1:1998); German version EN 60118-1:1995 + A1:1998) |
| DIN EN 60118-12-1997 |
助聽器.第12部分:電子連接器系統的尺寸 |
(Hearing aids - Part 12: Dimensions of electrical connector systems (IEC 60118-12:1996); German version EN 60118-12:1996) |
| DIN EN 60118-13-1998 |
助聽器.第13部分:電磁兼容性(EMV) |
(Hearing aids - Part 13: Electromagnetic compatibility (EMC) (IEC 60118-13:1997); German version EN 60118-13:1997) |
| DIN EN 60118-14-1998 |
助聽器.第14部分:數字接口的規范 |
(Hearing aids - Part 14: Specification of a digital interface (IEC 60118-14:1998); German version EN 60118-14:1998) |
| DIN EN 60118-2-1998 |
助聽器.第2部分:自動放大調節的助聽器 |
(Hearing aids - Part 2: Hearing aids with automatic gain control circuits (IEC 60118-2:1983 + A1:1993 + A2:1997); German version EN 60118-2:1995 + A2:1997) |
| DIN EN 60118-4-1999 |
助聽器.第4部分:助聽器的聲頻感應回路中磁場強度 |
(Hearing aids - Part 4: Magnetic field strength in audio-frequency induction loops for hearing aid purposes (IEC 60118-4:1981 + A1); German version EN 60118-4:1998 + A1:1998) |
| DIN EN 60118-6-2000 |
助聽器.第6部分:助聽器輸入線路特性 |
(Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids (IEC 60118-6:1999); German version EN 60118-6-1999) |
| DIN EN 60118-7-1994 |
助聽器.第7部分:為交貨而進行質量檢驗的助聽器傳送特性的測量 |
(Hearing aids; part 7: measurement of the performance characteristics of hearing aids for quality inspection for delivery purposes (IEC 60118-7:1983 + IEC 118-7 AMD 1:1994); German version EN 60118-7:1993 + A1:1994) |
| DIN EN 60122-1-2003 |
經質量評定的石英晶體件.第1部分:總規范 |
(Quartz crystal units of assessed quality - Part 1: Generic specification (IEC 60122-1:2002); German version EN 60122-1:2002) |
| DIN EN 60122-3-2002 |
經過質量評定的石英晶體件.第3部分:標準外形圖和引線接頭 |
(Quartz crystal units of assessed quality - Part 3: Standard outlines and lead connections (IEC 60122-3:2001); German version EN 60122-3:2001) |
| DIN EN 60127-1-2003 |
微型熔斷器.第1部分:微型熔斷器的定義和微型熔斷體的一般要求 |
(Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1:1988 + A1:1999 + A2:2002); German version EN 60127-1:1991 + A1:1999 + A2:2003) |
| DIN EN 60127-1/A1-1999 |
微型熔斷器.第1部分:微型熔斷器的定義和微型熔斷體的通用要求.修改件1 |
(Amendment to DIN EN 60127-1: Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (IEC 60127-1/A1:1999); German version EN 60127-1/A1:1999) |
| DIN EN 60127-10-2002 |
微型熔斷器.第10部分:微型熔斷器使用者指南 |
(Miniature fuses - Part 10: User guide for miniature fuses (IEC 60127-10:2001); German version EN 60127-10:2002) |
| DIN EN 60127-2-2001 |
微型熔斷器.第2部分:熔絲管 |
(Miniature fuses - Part 2: Cartridge fuse-links (IEC 60127-2:1989 + A1:1995 + A2:2000); German version EN 60127-2:1991 + A1:1995 + A2:2000)) |
| DIN EN 60127-2-2004 |
微型熔斷器.第2部分:管式熔斷體 |
|
| DIN EN 60127-3-1996 |
微型熔斷器.第3部分:小型熔絲管 |
(Miniature fuses - Part 3: Sub-miniature fuse-links (IEC 60127-3:1988 + A1:1991 + Corrigendum 1994); German version EN 60127-3:1996) |
| DIN EN 60127-3-2003 |
微型熔斷器.第3部分:超微型熔斷體 |
(Miniature fuses - Part 3: Sub-miniature fuse-links (IEC 60127-3:1988 + A1:1991 + Corrigendum 1:1994 + Corrigendum 2:1996 + A2:2002); German version EN 60127-3:1996 + A2:2003) |
| DIN EN 60127-4-2003 |
小型熔斷器.第4部分:通用模數熔斷體(UMF) |
(Miniature fuses - Part 4: Universal Modular Fuse-links (UMF) (IEC 60127-4:1996 + A1:2002); German version EN 60127-4:1996 + A1:2002) |
| DIN EN 60127-4-2004 |
微型熔斷器.第4部分:通用模數熔斷體(UMF) |
|
| DIN EN 60127-4-2004 |
微型熔斷器.第4部分:通用模數熔斷體(UMF) |
|
| DIN EN 60127-4-2005 |
微型熔斷器.第4部分:通用模數熔斷體(UMF).通孔和表面安裝型 |
|
| DIN EN 60127-6-1996 |
微型熔斷器.第6部分:微型熔斷體用保險絲盒 |
(Miniature fuses - Part 6: Fuse-holders for miniature fuse-links (IEC 60127-6:1994 + A1:1996); German version EN 60127-6:1994 + A1:1996) |
| DIN EN 60129-1998 |
交流隔離開關和接地開關 |
(Alternating current disconnectors and earthing switches (IEC 60129:1984 + A1:1992 + A2:1996); German version EN 60129:1994 + A1:1994 + A2:1996) |
| DIN EN 60130-17-1999 |
頻率低于3MHz的連接器.第17部分:使用充電電池的允許多向連接的互連裝置的詳細規范 |
(Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries (IEC 60130-17:1998); German version EN 60130-17:1999) |
| DIN EN 60130-9-2001 |
低于3MHz頻率的連接器.第9部分:無線電和相關聲音設備的環形連接器 |
(Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment (IEC 60130-9:2000); German version EN 60130-9:2000) |
| DIN EN 60133-2001 |
由磁氧化物和相關部分制成的罐形磁芯的尺寸 |
(Dimensions of pot-cores made of magnetic oxides and associated parts (IEC 60133:2000); German version EN 60133:2001) |
| DIN EN 60137-1996 |
交流電壓1kV以上絕緣套管 |
(Insulated bushings for alternating voltages above 1 kV (IEC 36A/94/CDV:2002); German version prEN 60137:1996) |
| DIN EN 60137-2004 |
交流電壓1kV以上絕緣套管 |
|
| DIN EN 60139-2001 |
陰極射線管的外形圖的準備及其部件、連接件和量規 |
(Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges (IEC 60139:2000); German version EN 60139:2001) |
| DIN EN 60143-1-1995 |
電力系統用串聯電容器.第1部分:概述.工作性能.檢驗和測量.安全要求.建造規范 |
(Series capacitors for power systems - Part 1: General; performance, testing and rating; safety requirements; guide for installation (IEC 60143:1992); German version EN 60143-1:1993) |
| DIN EN 60143-1-2004 |
電力系統用串聯電容器.第1部分:總則 |
|
| DIN EN 60143-2-1995 |
電力系統用串聯電容器.第2部分:串聯電容器電池的保護裝置 |
(Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks (IEC 60143-2:1994); German version EN 60143-2:1994) |
| DIN EN 60143-3-1999 |
電力系統用串聯電容器.第3部分:內裝的熔斷器 |
(Series capacitors for power systems - Part 3: Internal fuses (IEC 60143-3:1998); German version EN 60143-3:1998) |
| DIN EN 60146-1-1 Berichtigung 1-2003 |
DINEN60146-1-1-1994的技術勘誤1 |
(Corrigendum to DIN EN 60146-1-1 (VDE 0558 Teil 11):1994-03) |
| DIN EN 60146-1-1-1994 |
半導體變流器.第1部分:電網換相變流器和一般要求.第1節:基本要求規范 |
(Semiconductor convertors; general requirements and line-commutated convertors; part 1-1: specifications of basic requirements (IEC 60146-1-1:1991); German version EN 60146-1-1:1993) |
| DIN EN 60146-1-1/A1-1998 |
半導體變流器.電網換相變流器和一般要求.第1-1部分:基本要求規范.修正件A1 |
(Semiconductor convertors - General requirements and line-commutated convertors - Part 1-1: Specifications of basic requirements: Amendment A1; (IEC 60146-1-1:1991/A1:1996); German version EN 60146-1-1:1993/A1:1997) |
| DIN EN 60146-1-3-1994 |
半導體變流器.第1部分:電網換相變流器和一般要求.第3節:變壓器和電抗器 |
(Semiconductor convertors; general requirements and line-commutated convertors; part 1-3: transformers and reactors (IEC 60146-1-3:1991); German version EN 60146-1-3:1993) |
| DIN EN 60146-2-2001 |
半導體變換器.第2部分:包括直流變換器的自整流半導體變換器 |
(Semiconductor convertors - Part 2: Self-commutated semiconductor convertors including direct d.c. convertors (IEC 60146-2:1999); German version EN 60146-2:2000) |
| DIN EN 60154-1-1995 |
波導法蘭盤.第1部分:一般要求 |
(Flanges for waveguides - Part 1: General requirements (IEC 60154-1:1982 + A1:1993); German version EN 60154-1:1994 + A1:1994) |
| DIN EN 60154-2-1998 |
波導管用法蘭盤.第2部分:矩形波導用法蘭盤的一般要求 |
(Flanges for waveguides - Part 2: Relevant specifications for flanges for ordinary rectangular waveguides (IEC 60154-2:1980 + A1:1997); German version EN 60154-2:1997 + A1:1997) |
| DIN EN 60155-1996 |
熒光燈用起輝器 |
(Glow-starters for fluorescent lamps (IEC 60155:1993); German version EN 60155:1995) |
| DIN EN 60155/A1-1996 |
熒光燈啟動器 |
(Glow-starters for fluorescent lamps (IEC 60155:1993/A1:1995); German version EN 60155:1995/A1:1995) |
| DIN EN 60156-1996 |
絕緣液.電源頻率下?lián)舸╇妷簻y(cè)定.檢驗法 |
(Insulating liquids - Determination of the breakdown voltage at power frequency - Test method (IEC 60156:1995); German version EN 60156:1995) |
| DIN EN 60168-2001 |
額定電壓1kV以上的系統用陶瓷材料或玻璃制室內和室外架空支承絕緣子的試驗 |
(Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV (IEC 60168:1994 + A1:1997 + A2:2000); German version EN 60168:1994 + A1:1997 + A2:2000) |
| DIN EN 60169-21-1998 |
射頻連接器.第21部分:外導體內徑為9.5mm(0.374in),不同型式的螺紋連接,特性阻抗為50Ω、兩種型式的射頻連接 |
(Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (O,374 in) with different versions of screw coupling - Characteristic impedance 50(Types SC-A and SC-B) (IEC 60169-21:1985 + A1:19 |
| DIN EN 60169-23-1994 |
射頻連接器.第23部分:外導體內徑3.5mm(0.1378in)用于3.5mm剛性同軸電纜線路的插銷插座式射頻連接器 |
(Radio-frequency connectors; part 23: pin and socket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (IEC 60169-23:1991); German version EN 60169-23:1993) |
| DIN EN 60169-24-1994 |
射頻連接器.第24部分:一般用于75歐姆電纜分配系統(F型)螺紋聯接的射頻同軸連接器 |
(Radio-frequency connectors; part 24: radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F) (IEC 60169-24:1991); German version EN 60169-24:1993) |
| DIN EN 60169-25-1994 |
射頻連接器.第25部分:外導體直徑為13.56mm(0.534in)(TWHN型)雙內導體屏蔽平衡電纜配(3/4-20UNEF)雙極螺絲偶 |
(Radio-frequency connectors; part 25: two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (type TWHN) (IEC 60169-25:1992); German version EN 601 |
| DIN EN 60172-1995 |
測定漆包繞組線溫度指數的試驗規程 |
(Test procedure for the determination of the temperature index of enamelled winding wires (IEC 60172:1987); German version EN 60172:1994) |
| DIN EN 60172/A1-1998 |
測定漆包繞組線溫度指數的試驗方法.修訂件A1 |
(Test procedure for the determination of the temperature index of enamelled winding wires; Amendment A1 (IEC 60172:1987/A1:1997); German version EN 60172:1994/A1:1998) |
| DIN EN 60188-2002 |
高壓汞蒸氣燈.性能規范 |
(High-pressure mercury vapour lamps - Performance specifications (IEC 60188:2001); German version EN 60188:2001) |
| DIN EN 60191-3 Bb.1-2003 |
半導體器件的機械標準化.第3部分:集成線路輪廓繪圖制備的一般規則.補充件1:術語摘要 |
(Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits; Supplement 1: Extract of the terms) |
| DIN EN 60191-3-2000 |
半導體裝置的機械標準.第3部分:集成線路輪廓繪圖準備的一般規則 |
(Mechanical standardization of semiconductor devices - Part 3: General rules for the preparation of outline drawings of integrated circuits (IEC 60191-3:1999); German version EN 60191-3:1999) |
| DIN EN 60191-4-2003 |
半導體器件的機械標準化.第4部分:半導體器件封裝用封裝外殼的規定和分類 |
(Mechanical standardization of semiconductor devices - Part 4: Coding system and classification into forms of package outlines for semiconductor device packages (IEC 60191-4:1999 + A1:2001 + A2:2002); German version EN 60191-4:1999 + A1:2002 + A2:2002) |
| DIN EN 60191-6-10-2004 |
半導體器件的機械標準化.第6-10部分:表面安裝半導體器件封裝外形圖繪制的一般原則.P-VSON的尺寸 |
|
| DIN EN 60191-6-12-2003 |
半導體器件的機械標準化.第6-12部分:表面安裝半導體器件封裝外形圖繪制的一般規則.小節距柵極矩陣列的設計 |
(Mechanical standardization of semiconductor devices - Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for fine-pitch land grid array (FLGA); Rectangular type (IEC 60191-6-12: |
| DIN EN 60191-6-2-2002 |
半導體器件的機械標準化.第6-2部分:繪制表面安裝半導體器件封裝外形圖的一般規則.1.5mm、1.27mm和1.00mm樹 |
(Mechanical standardization of semiconductor devices - Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for 1,50 mm, 1,27 mm and 1,00 mm pitch ball and column terminal packages |
| DIN EN 60191-6-3-2001 |
半導體裝置的機械標準化.第6-3部分:半導體裝置包裝的表面固定的繪圖制備的一般規則.包裝尺寸的測量方法 |
(Mechanical standardization of semiconductor devices - Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Measuring methods for package dimensions of quat flat packs (QFP) (IEC 60191-6-3:2000) |
| DIN EN 60191-6-4-2004 |
半導體器件的機械標準化.第6-4部分:表面安裝半導體器件封裝外形圖繪制的一般規則.焊球網格陣列(BGA)封裝尺 |
(Mechanical standardization of semiconductor devices - Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid array (BGA) (IEC 60191-6-4:200) |
| DIN EN 60191-6-4-2004 |
半導體器件的機械標準化.第6-4部分:表面安裝半導體器件封裝外形圖繪制的一般規則.焊球網格陣列(BGA)封裝尺寸的測量方法 |
|
| DIN EN 60191-6-5-2002 |
半導體器件的機械標準化.第6-5部分:表面安裝半導體器件外殼外形圖繪制的一般規則.小螺距刃片柵格排列的設計 |
(Mechanical standardization of semiconductor devices - Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for fine-pitch ball grid array (FBGA) (IEC 60191-6-5:2001); German versio |
| DIN EN 60191-6-6-2002 |
半導體器件的機械標準化.第6-6部分:平面安裝的半導體器件外殼外形圖繪制的一般規則.小螺距刃片柵格排列的設 |
(Mechanical standardization of semiconductor devices - Part 6-6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for fine pitch land grid array (FLGA) (IEC 60191-6-6:2001); German versio |
| DIN EN 60191-6-8-2002 |
半導體器件的機械標準化.第6-8部分:準備表面安裝的半導體器件包裝件外形圖的一般規則.玻璃-陶瓷方形扁平封 |
(Mechanical standardization of semiconductor devices - Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages; Design guide for glass sealed ceramic quad flatpack (G-QFP) (IEC 60191-6-8:2001); Germ |
| DIN EN 60192-2002 |
低壓鈉蒸氣燈.性能規范 |
(Low-pressure sodium vapour lamps - Performance specifications (IEC 60192:2001); German version EN 60192:2001) |
| DIN EN 602-1995 |
鋁和鋁合金.鍛件.與食品接觸的產品制造用半成品的化學成分 |
(Aluminium and aluminium alloys - Wrought products - Chemical composition of semi products used for the fabrication of articles for use in contact with food; German version EN 602:1994) |
| DIN EN 602-2004 |
鋁和鋁合金.鍛件.與食品接觸的物品制造用半成品的化學成分 |
|
| DIN EN 60204-1-1998 |
機械設備的安全性.機械設備中的電氣裝置.第1部分:一般要求 |
(Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:1997 + Corrigendum 1998); German version EN 60204-1:1997) |
| DIN EN 60204-11-2001 |
機械安全.機械電氣設備.第11部分:大于1000Va.c.或1500V.d.c不超過36KV的高壓設備的要求 |
(Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c and not exceeding 36 kV (IEC 60204-11:2000); German version EN 60204-11:2000) |
| DIN EN 60204-31 Berichtigung 1-2001 |
對DINEN60204-31(VDE0113Teil31):1999-06的勘誤 |
(Corrigendum to DIN EN 60204-31 (VDE 0113 Teil 31):1999-06) |
| DIN EN 60204-31-1999 |
機器的安全性.機器上的電器裝置.第31部分:縫紉機、縫紉組件和縫紉設備特殊安全和EMC要求 |
(Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems (IEC 60204-31:1996, modified); German version EN 60204-31:1998) |
| DIN EN 60204-32-1999 |
機械安全.機器上的電器設備.第32部分:起重裝置的要求 |
(Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (IEC 60204-32:1998); German version EN 60204-32:1998) |
| DIN EN 60205-2001 |
磁性零件有效參數的計算 |
(Calculation of the effective parameters of magnetic piece parts (IEC 60205:2001); German version EN 60205:2001) |
| DIN EN 60214-1998 |
有載分接開關 |
(On-load tap-changers (IEC 60214:1989, modified); German version EN 60214:1997) |
| DIN EN 60215-1993 |
對無線電發射設備的安全要求 |
Safety requirements for radio transmitting equipment (IEC 60215:1987 + A1:1990); German version EN 60215:1989 + A1:1992 |
| DIN EN 60215/A2-1995 |
對無線電發射設備的安全要求 |
(Safety requirements for radio transmitting equipment (IEC 62152/A:1993); German version EN 60215/A2:1994) |
| DIN EN 60216-1-2002 |
電絕緣材料的耐熱性能.第1部分:老化過程和試驗結果評定 |
(Electrical insulating materials - Properties of thermal endurance - Part 1: Ageing procedures and evaluating of test results (IEC 60216-1:2001); German version EN 60216-1:2001) |
| DIN EN 60216-3-2-1997 |
電絕緣材料耐熱性能的測定導則.第3部分:計算熱耐久特性值的規則.第2節:不包括和包括停機期間介質(同樣的檢 |
(Guide for the determination of thermal endurance properties of electrical insulating materials - Part 3: Instructions for calculating thermal endurance characteristics - Section 2: Calculations for incomplete data: proof test results up to and including |
| DIN EN 60216-3-2002 |
電絕緣材料的耐熱性能.第3部分:耐熱特性值計算指南 |
(Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (IEC 60216-3:2002); German version EN 60216-3:2002) |
| DIN EN 60216-4-2-2001 |
電絕緣材料.耐熱性能.第4-2部分:老化爐.不超過300℃的精密烘爐 |
(Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens; Precision ovens for use up to 300 鳦 (IEC 60216-4-2:2000); German version EN 60216-4-2:2000) |
| DIN EN 60216-4-3-2001 |
電絕緣材料.耐熱性能.第4-3部分:老化爐.多室老化爐 |
(Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens; Multi-chamber ovens (IEC 60216-4-3:2000); German version EN 60216-4-3:2000) |
| DIN EN 60216-5-2003 |
電絕緣材料.耐熱特性.第5部分:絕緣材料相對耐熱指數(RTE)的測定 |
(Electric insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material(IEC 60216-5:2003); German version EN 60216-5:2003) |
| DIN EN 60216-6-2004 |
電絕緣材料.耐熱性能.第6部分:用固定時間框架法測定絕緣材料的耐熱指數(TI和RTE) |
|
| DIN EN 60230-2003 |
電纜及其附件的脈沖電壓試驗 |
(Impulse tests on cables and their accessories (IEC 60230:1966); German version EN 60230:2002) |
| DIN EN 60238 Berichtigung 1-2003 |
DINEN60238-2003的技術勘誤1 |
(Corrigendum to DIN EN 60238 (VDE 0616 Part 1):2003-05 (CENELEC-Corrigendum to EN 60238:1998/A2:2002)) |
| DIN EN 60238-2003 |
愛迪森螺紋燈座 |
(Edison screw lampholders (IEC 60238:1998 + A1:1999 + A2:2002); German version EN 60238:1998 + Corrigendum February 1999 + A1:1999 + A2:2002) |
| DIN EN 60239-1997 |
電弧爐用的帶螺紋座和連接銷的圓柱形機加工石墨電極的公稱尺寸 |
(Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and nipples for use in electric arc furnaces (IEC 60239:1997); German version EN 60239:1997) |
| DIN EN 60240-1-1995 |
工業加熱用電紅外發射器的特性.第1部分:短波紅外發射器 |
(Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters (IEC 60240-1:1992); German version EN 60240-1:1994) |
| DIN EN 60243-1-1999 |
絕緣材料的電氣擊穿強度.檢驗方法.第1部分:工業頻率檢驗 |
(Electrical strength of insulating materials - Test methods - Part 1: Test at power frequencies (IEC 60243-1:1998); German version EN 60243-1:1998) |
| DIN EN 60243-2-2001 |
固體絕緣材料介電強度的試驗方法.第2部分:用直流電壓測試的補充要求 |
(Electric strength of insulating materials - Test methods - Part 2: Additional requirements for tests using direct voltage (IEC 60243-2:2001); German version EN 60243-2:2001) |
| DIN EN 60243-3-1996 |
固體絕緣材料的介電強度試驗方法.第3部分:沖擊電壓試驗的補充規定 |
(Methods of test for electric strength of solid insulating materials - Part 3: Additional requirements for impulse tests (IEC 60243-3:1993); German version EN 60243-3:1994) |
| DIN EN 60244-1-2000 |
無線電發射機的測量方法.第1部分:廣播發射機的總特征 |
(Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters (IEC 60244-1:1999); German version EN 60244-1:2000) |
| DIN EN 60244-10-1994 |
無線電發射機的測量方法.第10部分:采用插入測試信號的電視發射機和差轉機的測量方法 |
(Methods of measurement for radio transmitters - Part 10: Methods of measurement for television transmitters and transposers employing insertion test signals (IEC 60244-10:1986); German version EN 60244-10:1993) |
| DIN EN 60244-11-1994 |
無線電發射機的測量方法.第11部分:無線電差轉機的測量方法 |
(Methods of measurement for radio transmitters - Part 11: Transposers for FM sound broadcasting (IEC 60244-11:1989); German version EN 60244-11:1993) |
| DIN EN 60244-12-1-1994 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.規定特性 |
(Methods of measurement for radio transmitters - Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; characteristics to be specified (IEC 60244-12-1:1989); German version EN 60244- |
| DIN EN 60244-12-2-1994 |
無線電發射機的測量方法.第12部分:音響設備和電視播放設備用發射機和換位器的草擬說明導則.說明卡 |
(Methods of measurement for radio transmitters - Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting; specification sheet (IEC 60244-12-2:1989); German version EN 60244-12-2:1993) |
| DIN EN 60244-13-1993 |
無線電源發射機的測量方法.第13部分:調頻聲廣播的傳送性能 |
(Methods of measurement for radio transmitters; part 13: performance characteristics for FM sound broadcasting (IEC 60244-13:1991); German version EN 60244-13:1993) |
| DIN EN 60244-14-1998 |
無線電發射機的測量方法.第14部分:由于使用同樣的或相近的天線的兩個或多個發射機而造成的外部相互調制的分 |
(Methods of measurement for radio transmitters - Part 14: External intermodulation products caused by two or more transmitters using the same or adjacent antennas (IEC 60244-14:1997); German version EN 60244-14:1997) |
| DIN EN 60244-15-2000 |
無線電發射機的測量方法.第15部分:聲音廣播用的調幅調制發射機 |
(Methods of measurement for radio transmitters - Part 15: Amplitude-modulated transmitters for sound broadcasting (IEC 60244-15:1999); German version EN 60244-15:2000) |
| DIN EN 60244-5-1994 |
無線電發射機的測量方法.第5部分:電視發射機的特性 |
(Methods of measurement for radio transmitters - Part 5: Performance characteristics of television transmitters (IEC 60244-5:1992); German version EN 60244-5:1994) |
| DIN EN 60244-8-1994 |
無線電發射機的測量方法.第8部分:檢驗電視發射機和換位器用的殘留邊帶解調器的特性 |
(Methods of measurement for radio transmitters - Part 8: Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers (IEC 60244-8:1993); German version EN 60244-8:1994) |
| DIN EN 60244-9-1994 |
無線電發射機的測量方法.第9部分:電視換位器的傳輸特性 |
(Methods of measurement for radio transmitters - Part 9: Performance characteristics for television transposers (IEC 60244-9:1993); German version EN 60244-9:1994) |
| DIN EN 60247-2005 |
絕緣液體.相對電容率、電介質損耗因數(tanδ)和直流電阻率的測量 |
|
| DIN EN 60249-1-1994 |
印制電路用基材.第1部分:試驗方法 |
(Base materials for printed circuits; part 1: test methods (IEC 60249-1:1982 + A4:1993); German version EN 60249-1:1993 + A4:1994) |
| DIN EN 60249-2-1-2000 |
印制電路用基材.第2部分:規范.第1號規范:高電氣質量的酚醛纖維素紙覆銅層壓板 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality (IEC 60249-2-1:1985 + A1:1989 + A2:1993 + A3:1994 + A4:2000); German version EN 60249-2-1:199 |
| DIN EN 60249-2-10-2001 |
印制電路用基材.第2部分:規范.第10號規范:確定了燃燒性的環氧非織物玻璃增強銅涂覆層片 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 10: Epoxide non woven/woven glass reinforced copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-10:1987 + A1:1989 + A2:1990 + A3:1993 + |
| DIN EN 60249-2-11-2001 |
印制電路用基材.第2部分:規范.第11號規范:一般用途級的多層印制板生產用的薄環氧織物玻璃纖維銅涂覆層片. |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 11: Thin epoxide woven glass fabric copper-clad laminated sheet, general purpose grade, for use in the fabrication of multilayer printed boards (IEC 60249-2-11:1987 + A1:1989 |
| DIN EN 60249-2-12-2001 |
印制電路用基材.第2部分:規范.第12號規范:多層印制板生產用的確定了燃燒性的薄環氧織物玻璃纖維銅涂覆層片. |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 12: Thin epoxide woven glass fabric copper-clad laminated sheet, of defined flammabilty, for use in the fabrication of multilayer printed boards (IEC 60249-2-12:1987 + A1:198 |
| DIN EN 60249-2-13-1994 |
印制電路用基材.第2部分:規范.第13號規范:通用級軟覆銅聚酰亞胺薄膜,通用級 |
(Base materials for printed circuits - Part 2: Specifications; specification No. 13: Flexible copper-clad polyimide film, general purpose grade (IEC 60249-2-13:1987 + A1:1993); German version EN 60249-2-13:1994 + A1:1994) |
| DIN EN 60249-2-14-2001 |
印制電路用基材.第2部分:規范.第12號規范:經濟質量的確定了燃燒性的酚酸纖維素銅涂覆層片. |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 14: Phenolic cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test), economic quality (IEC 60249-2-14:1988 + A2:1990 + A3:1993 + A4:1994 |
| DIN EN 60249-2-15-1994 |
印制電路用基材.第2部分:規范.第15號規范:規定易燃性的軟覆銅聚酰亞胺薄膜,規定的易燃性 |
(Base materials for printed circuits - Part 2: Specifications; specification No. 15: Flexible copper-clad polyimide film, of defined flammability (IEC 60249-2-15:1987 + A1:1993); German version EN 60249-2-15:1994 + A1:1994) |
| DIN EN 60249-2-16-2001 |
印制電路用基材.第2部分:規范.第16號規范:確定了燃燒性的聚酰胺織物纖維銅涂覆層片的經濟質量 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 16: Polyamide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test), economic quality (IEC 60249-2-16:1992 + A1:1993 + A2:1994 + A3:2 |
| DIN EN 60249-2-17-2001 |
印制電路用基材.第2部分:規范.第17號規范:用于多層印制板生產的確定了燃燒性的薄聚酰胺玻璃纖維的銅覆蓋層 |
() |
| DIN EN 60249-2-18-2001 |
印制電路用基材.第2部分:規范.第18號規范.規定易燃性的帶雙馬來酰亞胺三嗪的銅涂覆改良性環氧化物層壓玻璃 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 18: Bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-18:1992 + A1:1993 + A2: |
| DIN EN 60249-2-19-1993 |
印制電路用基材.第2部分:規范.第19號規范.多層印制板制作用規定易燃性的帶雙馬來酰亞胺三嗪的薄銅涂覆改良 |
(Base materials for printed circuits; part 2: specifications; specification No. 19: thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| DIN EN 60249-2-19/A1-1994 |
印制電路用基材.第2部分:規范.第19號規范.多層印制板制作用規定易燃性的覆銅雙馬來酰亞胺三嗪改性環氧玻璃 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 19: Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| DIN EN 60249-2-19/A2-1996 |
印制電路用基材.第2部分:規范.第19號規范.多層印制板制作用規定易燃性的帶雙馬來酰亞胺三嗪的薄銅涂覆改良 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 19: Thin bismaleimide/triazine modified epoxide woven glass fabric copper-clad laminated sheet of defined flammability for use in the fabrication of multilayer printed boards |
| DIN EN 60249-2-2-2000 |
印制電路用基材.第2部分:規范.第2號規范:經濟質量的酚醛纖維素紙覆銅層壓板 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 2: Phenolic cellulose paper copper-clad laminated sheet, economic quality (IEC 60249-2-2:1985 + A1:1989 + A2:1990 + A3:1993 + A4:1994 + A5:2000); German version EN 60249-2-2: |
| DIN EN 60249-2-3-2000 |
印制電路用基材.第2部分:規范.第3號規范:規定易燃性的環氧化合物纖維素紙覆銅層壓板(垂直燃燒試驗) |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 3: Epoxide cellulose paper copper-clad laminated sheet of defined flammability (vertical burning test) (IEC 60249-2-3:1987 + A1:1989 + A2:1993 + Corrig.:1994 + A3:1994 + A4:2 |
| DIN EN 60249-2-4-2000 |
印制電路用基材.第2部分:規范.第4號規范:普通級的環氧化合物編織的玻璃纖維覆銅層壓板 |
(Base materials for printed circuits - Part 2: Specifications; Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade (IEC 60249-2-4:1987 + A1:1989 + A2:1992 + A3:1993 + A4:1994 + A5:2000); German version EN 602 |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com