標準號 |
中文名稱 |
英文名稱 |
| DIN EN 13310-2003 |
廚房洗滌槽.功能要求和試驗方法 |
(Kitchen sinks - Functional requirements and test methods; German version EN 13310:2003) |
| DIN EN 133100-1999 |
分規范.抑制電磁干擾用無源濾波器.規定用于無安全檢驗的濾波器 |
(Sectional specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required; German version EN 133100:1998) |
| DIN EN 133101-1999 |
空白詳細規范.抑制電磁干擾用無源濾波器.規定用于無安全檢驗的濾波器 |
(Blank detail specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required; German version EN 133101:1998) |
| DIN EN 13311-1-2001 |
生物技術.容器的性能標準.第1部分:一般性能標準 |
(Biotechnology - Performance criteria for vessels - Part 1: General performance criteria; German version EN 13311-1:2001) |
| DIN EN 13311-2-2001 |
生物技術.容器的性能標準.第2部分:防壓裝置 |
(Biotechnology - Performance criteria for vessels - Part 2: Pressure protection devices; German version EN 13311-2:2001) |
| DIN EN 13311-3-2001 |
生物技術.容器的性能標準.第3部分:玻璃壓力容器 |
(Biotechnology - Performance criteria for vessels - Part 3: Glass pressure vessels; German version EN 13311-3:2001) |
| DIN EN 13311-4-2001 |
生物技術.容器的性能標準.第4部分:生物反應器 |
(Biotechnology - Performance criteria for vessels - Part 4: Bioreactors; German version EN 13311-4:2001) |
| DIN EN 13311-5-2001 |
生物技術.容器的性能標準.第5部分:殺死罐 |
(Biotechnology - Performance criteria for vessels - Part 5: Kill tanks; German version EN 13311-5:2001) |
| DIN EN 13311-6-2001 |
生物技術.容器的性能標準.第6部分:色譜柱 |
(Biotechnology - Performance criteria for vessels - Part 6: Chromatography columns; German version EN 13311-6:2001) |
| DIN EN 13312-1-2001 |
生物技術.管路和儀器裝置的性能標準.第1部分:通用性能標準 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 1: General performance criteria; German version EN 13312-1:2001) |
| DIN EN 13312-2-2001 |
生物技術.管路和儀器裝置的性能標準.第2部分:耦合 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 2: Couplings; German version EN 13312-2:2001) |
| DIN EN 13312-3-2001 |
生物技術.管路和儀器裝置的性能標準.第3部分:取樣和接種設備 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 3: Sampling and inoculation devices; German version EN 13312-3:2001) |
| DIN EN 13312-4-2001 |
生物技術.管路和儀器裝置的性能標準.第4部分:管 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 4: Tubes and pipes; German version EN 13312-4:2001) |
| DIN EN 13312-5-2001 |
生物技術.管路和儀器裝置的性能標準.第5部分:閥門 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 5: Valves; German version EN 13312-5:2001) |
| DIN EN 13312-6-2001 |
生物技術.管路和儀器裝置的性能標準.第6部分:設備探針 |
(Biotechnology - Performance criteria for piping and instrumentation - Part 6: Equipment probes; German version EN 13312-6:2001) |
| DIN EN 13313-2002 |
制冷系統和熱泵.人員能力. |
(Refrigerating systems and heat pumps - Competence of personnel; German version EN 13313:2001) |
| DIN EN 13314-2003 |
危險物品運輸用槽罐車.槽罐車的輔助設備.裝填孔的封蓋 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover; German version EN 13314:2002) |
| DIN EN 13315-2002 |
危險物品運輸用的槽罐車.槽罐車用設備.重力式卸載耦合器 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler; German version EN 13315:2002) |
| DIN EN 13316-2003 |
危險物品運輸用槽罐車.槽罐車用輔助設備.壓力平衡底閥 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002) |
| DIN EN 13317-2003 |
危險物品運輸用槽罐車.槽罐車的輔助設備.人孔封蓋組件 |
(Tanks for transport of dangerous goods - Service equipment for tanks - Manhole cover assembly; German version EN 13317:2002) |
| DIN EN 13318-2000 |
找平材料和地板找平層.定義 |
(Screed material and floor screeds - Definitions; Trilingual version EN 13318:2000) |
| DIN EN 13319-2000 |
潛水設備附件.深度規和深度及時間組合測量設備.功能和安全要求、試驗方法 |
(Diving accessories - Depth gauges and combined depth and time measuring devices - Functional and safety requirements, test methods; German version EN 13319:2000) |
| DIN EN 1332-1-2000 |
識別卡系統.人機接口.第1部分:用戶界面的設計原理 |
(Identification card systems - Man-machine interface - Part 1: Design principles for the user interface; German version EN 1332-1:1999) |
| DIN EN 1332-2-1999 |
識別卡系統.人機界面.第2部分:ID-1-卡用電鍵標識的尺寸和排列 |
(Identification card systems - Man-machine interface - Part 2: Dimensions and location of a tactile identifier for ID-1 cards; German version EN 1332-2:1998) |
| DIN EN 1332-3-2000 |
識別卡系統.人機界面.第3部分:小鍵盤 |
(Identification card systems - Man-machine interface - Part 3: Key pads; German version EN 1332-3:1999) |
| DIN EN 1332-4-2000 |
識別卡系統.人機界面.第4部分:有特殊需求的人員用用戶要求的編碼 |
(Identification card systems - Man-machine interface - Part 4: Coding of user requirements for people with special needs; German version EN 1332-4:1999) |
| DIN EN 13320-2002 |
表面活性劑.乙氧基化物中游離的環氧乙烷的氣相色譜法痕量測定 |
(Surface active agents - Gas chromatographic trace determination of free ethylene oxide in ethoxylates; German version EN 13320:2002) |
| DIN EN 133200-2000 |
分規范.電磁干擾抑制用無源濾波器裝置(安全試驗規定的濾波器) |
(Sectional specification - Passive filter units for electromagnetic interference suppression (filters, for which safety tests are required); German version EN 133200:1999) |
| DIN EN 133201-1999 |
空白詳細規范.抑制電磁干擾的無源濾波器.按規定需作安全檢驗的濾波器 |
(Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required; German version EN 133201:1998) |
| DIN EN 13322-1-2003 |
可運輸?shù)臍馄?可再充氣的焊接鋼氣瓶.設計和制造.第1部分:碳鋼 |
(Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel; German version EN 13322-1:2003) |
| DIN EN 13322-2-2003 |
可運輸?shù)臍馄?可再充氣的焊接鋼氣瓶.設計和制造.第2部分:不銹鋼 |
(Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 2: Stainless steel; German version EN 13322-2:2003) |
| DIN EN 133221-1999 |
空白詳細規范.抑制電磁干擾的無源濾波器.按規定需作安全檢驗的濾波器(僅僅是安全性檢驗) |
(Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (Safety tests only); German version EN 133221:1998) |
| DIN EN 13328-1-2002 |
麻醉和呼吸用呼吸系統過濾器.第1部分:過濾性能評估用鹽霧試驗法 |
(Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance; German version EN 13328-1:2001) |
| DIN EN 13328-2-2003 |
麻醉和呼吸用呼吸系統過濾器.第2部分:非過濾方面 |
(Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects; German version EN 13328-2:2002) |
| DIN EN 13328-2-2004 |
麻醉和呼吸用呼吸系統過濾器.第2部分:非過濾方面 |
|
| DIN EN 13329-2000 |
疊層地板覆蓋物.規范、要求和試驗方法 |
(Laminate floor coverings - Specifications, requirements and test methods; German version EN 13329:2000) |
| DIN EN 1333-1996 |
管道部件.PN的定義和選擇 |
(Pipework components - Definition and selection of PN; German version EN 1333:1996) |
| DIN EN 13330-2003 |
百葉窗.硬物體沖擊試驗方法 |
(Shutters - Hard body impact - Test method; German version EN 13330:2002) |
| DIN EN 13331-1-2002 |
電纜線鋪設系統.第1部分:產品規范 |
(Trench lining systems - Part 1: Product specifications; German version EN 13331-1:2002) |
| DIN EN 13331-2-2002 |
電纜線鋪設系統.第2部分:計算試驗進行評價 |
(Trench lining systems - Part 2: Assessment by calculation or test; German version EN 13331-2:2002) |
| DIN EN 13335-2002 |
皮革.物理和機械試驗.由皮革彎曲法測定抗彎曲強度 |
(Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method; German version EN 13335:2002) |
| DIN EN 13336-2004 |
皮革.裝飾皮革特性.家具用皮革的選擇指南 |
|
| DIN EN 1334-1996 |
居室家具.床和床墊.測量方法和公差建議 |
(Domestic furniture - Beds and mattresses - Methods of measurement and recommended tolerances; German version EN 1334:1996) |
| DIN EN 13341-2005 |
家用燃料油、煤油和柴油地上儲存用熱塑性固定油箱.利用陰離子聚合吹塑成形聚乙烯油箱、旋轉模制聚乙烯和聚酰胺6油箱.要求和試驗方法 |
|
| DIN EN 13342-2001 |
污泥特性.基耶達爾氮的測定 |
(Characterization of sludges - Determination of Kjeldahl nitrogen; German version EN 13342:2000) |
| DIN EN 13346-2001 |
污泥的特性.痕量素和含磷化合物的測定.王水萃取法 |
(Characterization of sludges - Determination of trace elements and phosphorus - Aqua regia extraction methods; German version EN 13346:2000) |
| DIN EN 13347-2003 |
銅和銅合金.焊接和類似鋅銅焊接用銅棒和銅絲 |
(Copper and copper alloys - Rod and wire for welding and braze welding; German version EN 13347:2002) |
| DIN EN 13348-2001 |
銅和銅合金.無縫的,醫用氣體或真空用的園銅管 |
(Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum; German version EN 13348:2001) |
| DIN EN 13348-2005 |
銅和銅合金.醫用氣體或真空用無縫圓形銅管 |
|
| DIN EN 13349-2002 |
銅和銅合金.固體外封的預絕緣處理的銅管 |
(Copper and copper alloys - Pre-insulated copper tubes with solid covering; German version EN 13349:2002) |
| DIN EN 1335-1 Berichtigung 1-2002 |
DINEN1335-1:2002(EN1335-1:2000/AC:2002)勘誤 |
(Corrigenda to DIN EN 1335-1:2002 (EN 1335-1:2000/AC:2002)) |
| DIN EN 13352-2002 |
自動罐裝容量量規性能規范 |
(Specification for the performance of automatic tank contents gauges; German version EN 13352:2002) |
| DIN EN 13353-2003 |
實心木制板材(SWP).要求 |
(Solid wood panels (SWP) - Requirements; German version EN 13353:2003) |
| DIN EN 13356-2001 |
非專業用高清晰度組件.試驗方法和要求 |
(Visibility accessories for non-professional use - Test methods and requirements; German version EN 13356:2001) |
| DIN EN 13357-2003 |
瀝青和瀝青粘合劑.石油輕制和軟制瀝青流出時間的測定 |
(Bitumen and bituminous binders - Determination of the efflux time of petroleum cut-back and fluxed bitumens; German version EN 13357:2002) |
| DIN EN 13358-2004 |
瀝青和瀝青粘結劑.石油稀釋瀝青產品的蒸餾特性測定 |
|
| DIN EN 13360-2003 |
橡膠或涂塑料纖維.三語種術語 |
(Rubber- or plastics-coated fabrics - Terminology; Trilingual version EN 13360:2002) |
| DIN EN 13361-2004 |
土工合成阻擋層.建造水庫和壩時要求的特性 |
|
| DIN EN 13362-2005 |
土工合成阻擋層.運河建設中使用的特定要求 |
|
| DIN EN 13362-2005 |
土工合成阻擋層.運河建設中使用的特定要求 |
|
| DIN EN 13363-2-2005 |
裝有玻璃窗的遮陽設備.太陽能和光的透射率總量計算.第2部分:詳細的計算方法 |
|
| DIN EN 13364-2002 |
天然石料試驗方法.在榫釘孔處斷裂荷載的測定 |
(Natural stone test methods - Determination of the breaking load at dowel hole; German version EN 13364:2001) |
| DIN EN 13365-2002 |
可運輸儲氣瓶.永久的液化氣體(乙炔除外)的鋼瓶組件.灌裝時的檢驗 |
(Transportable gas cylinders - Cylinder bundles for permanent and liquefied gases (excluding acetylene) - Inspection at the time of filling; German version EN 13365:2002) |
| DIN EN 13365-2005 |
可運輸?shù)膬馄?永久氣體和液化氣體(乙炔除外)用鋼瓶組件.灌裝時的檢驗 |
|
| DIN EN 13366-2001 |
肥料.螯合的微量養料含量和微量養料的螯合系數測定用陽離子交換樹脂處理 |
(Fertilizers - Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients; German version EN 13366:2001) |
| DIN EN 13368-1-2001 |
肥料.用離子色譜法測定肥料中的螯合劑.第1部分:EDTA、HEDTA和DTPA |
(Fertilizers - Determination of chelating agents in fertilizers by ion chromatography - Part 1: EDTA, HEDTA and DTPA; German version EN 13368-1:2001) |
| DIN EN 13368-2-2001 |
肥料.用離子色譜法對肥料中螯合劑的測定.第2部分:EDDHA和EDDHMA |
(Fertilizers - Determination of chelating agents in fertilizers by ion chromatography - Part 2: EDDHA and EDDHMA; German version EN 13368-2:2001) |
| DIN EN 13369-2001 |
預制混凝土產品的共同規則 |
(Common rules for precast concrete products; German version EN 13369:2001) |
| DIN EN 13369-2004 |
預制混凝土產品的通用規則 |
|
| DIN EN 1337-1-2001 |
結構軸承.第1部分:一般設計規則 |
(Structural bearings - Part 1: General design rules; German version EN 1337-1:2000) |
| DIN EN 1337-11-1998 |
建筑業用軸承.第11部分:運輸,中途存放和安裝 |
(Structural bearings - Part 11: Transport, storage and installation; German version EN 1337-11:1997) |
| DIN EN 1337-2-2001 |
結構軸承.第2部分:滑動件 |
(Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2000) |
| DIN EN 1337-2-2004 |
結構軸承.第2部分:滑動件 |
|
| DIN EN 1337-3-2005 |
結構軸承.第3部分:彈性軸承 |
|
| DIN EN 1337-4-2004 |
結構軸承.第4部分:滾柱軸承 |
|
| DIN EN 1337-5-2005 |
結構軸承.第5部分:鍋狀軸承 |
|
| DIN EN 1337-6-2004 |
結構軸承.第6部分:搖座 |
|
| DIN EN 1337-7-2001 |
結構軸承.第7部分:球面和滾柱聚四氟乙烯軸承 |
(Structural bearings - Part 7: Spherical and cylindrical PTFE bearings; German version EN 1337-7:2000) |
| DIN EN 1337-7-2004 |
結構軸承.第7部分:球面和滾柱聚四氟乙烯軸承 |
|
| DIN EN 1337-9-1998 |
建筑業用軸承.第9部分:防護 |
(Structural bearings - Part 9: Protection; German version EN 1337-9:1997) |
| DIN EN 13370-2003 |
廢棄物特征.提取物分析.銨、AOX、傳導性、汞、苯酚指數、TOC、CN、易析出性和F的測定 |
(Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, CN easily liberatable, F; German version EN 13370:2003) |
| DIN EN 13371-2002 |
低溫容器.低溫設施的聯接 |
(Cryogenic vessels - Couplings for cryogenic service; German version EN 13371:2001) |
| DIN EN 13373-2003 |
自然石材試驗方法.塊材幾何特性的測定 |
(Natural stone test methods - Determination of geometric characteristics on units; German version EN 13373:2003) |
| DIN EN 13374-2004 |
臨時邊緣加固系統.產品規范和試驗方法 |
|
| DIN EN 13375-2004 |
防水柔性薄板.車輛通行用混凝土橋板和其他混凝土表面的防水.樣品制備 |
|
| DIN EN 13377-2002 |
預制的木模板梁.要求、分類和評定 |
(Prefabricated timber formwork beams - Requirements, classification and assessment; German version EN 13377:2002) |
| DIN EN 13378-2002 |
面食加工設備.面食加工.安全性和衛生要求 |
(Pasta processing plants - Pasta presses - Safety and hygiene requirements; German version EN 13378:2001) |
| DIN EN 13379-2002 |
面食加工設備.成條機、脫皮機和切割機、膠質料運送帶、膠質料料斗.安全性和衛生要求. |
(Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements; German version EN 13379:2001) |
| DIN EN 1338-2003 |
鋪路混凝土砌塊.要求和試驗方法 |
(Concrete paving blocks - Requirements and test methods; German version EN 1338:2003) |
| DIN EN 13380-2001 |
外部建筑排水和下水道系統翻新和修理用構件的一般要求 |
(General requirements for components used for renovation and repair of drain and sewer systems outside buildings; German version EN 13380:2001) |
| DIN EN 13382-2003 |
材料搬運用平托盤.主要尺寸 |
(Flat pallets for materials handling - Principal dimensions; German version EN 13382:2002) |
| DIN EN 13383-1 Berichtigung 1-2004 |
對DIN EN 13383-1-2002的勘誤 |
|
| DIN EN 13383-1-2002 |
鋼筋石.第1部分:規范 |
(Armourstone - Part 1: Specification; German version EN 13383-1:2002) |
| DIN EN 13383-2-2002 |
鋼筋石.第2部分:試驗方法 |
(Armourstone - Part 2: Test methods; German version EN 13383-2:2002) |
| DIN EN 13384-1-2003 |
煙囪.動態流量計算方法.第1部分:煙囪專用設施 |
(Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one appliance; German version EN 13384-1:2002) |
| DIN EN 13385-2002 |
可運輸儲氣瓶.永久的液化氣體(乙炔除外)用蓄電池驅動車輛.灌裝時的檢驗 |
(Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at the time of filling; German version EN 13385:2002) |
| DIN EN 1339-2003 |
鋪路混凝土石板.要求和試驗方法 |
(Concrete paving flags - Requirements and test methods; German version EN 1339:2003) |
| DIN EN 13390-2002 |
食品加工機.餡餅和果餡糕點機.安全和衛生要求 |
(Food processing machinery - Pie and tart machines - Safety and hygiene requirements; German version EN 13390:2002) |
| DIN EN 13391-2004 |
后張法預應力混凝土的機械試驗 |
|
| DIN EN 13392-2001 |
紡織材料.單纖維絲.線密度的測定 |
(Textiles - Monofilaments - Determination of linear density; German version EN 13392:2001) |
| DIN EN 13393-2001 |
包裝.邊緣保護器的規范 |
(Packaging - Specification for edge protectors; German version EN 13393:2001) |
| DIN EN 13394-2001 |
包裝.非金屬拉伸箍帶的規范 |
(Packaging - Specification for non-metallic tensional strapping; German version EN 13394:2001) |
| DIN EN 13395-1-2002 |
混凝土構件維修和保護用產品和系統.試驗方法.可加工性的測定.第1部分:觸變性泥漿流量的試驗 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 1: Test for flow of thixotropic mortars; German version EN 13395-1:2002) |
| DIN EN 13395-2-2002 |
混凝土構件維修和保護用產品和系統.試驗方法.可加工性的測定.第2部分:薄泥漿或泥漿流量的試驗 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 2: Test for flow of grout or mortar; German version EN 13395-2:2002) |
| DIN EN 13395-3-2002 |
混凝土構件維修和保護用產品和系統.試驗方法.可加工性的測定.第3部分:備用混凝土流量的試驗 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 3: Test for flow of repair concrete; German version EN 13395-3:2002) |
| DIN EN 13395-4-2002 |
混凝土構件維修和保護用產品和系統.試驗方法.可加工性的測定.第4部分:備用泥漿高空的應用 |
(Products and systems for the protection and repair of concrete structures - Test methods; Determination of workability - Part 4: Application of repair mortar overhead; German version EN 13395-4:2002) |
| DIN EN 13396-2004 |
混凝土結構的防護和修理用產品和系統.試驗方法.氯離子浸入測量 |
|
| DIN EN 13397-2002 |
工業用閥門.金屬材料制造的隔膜閥門 |
(Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001) |
| DIN EN 13398-2004 |
瀝青和瀝青粘合劑.改性瀝青彈性復原的測定 |
|
| DIN EN 13399-2004 |
瀝青和瀝青粘合劑.改性瀝青存儲穩定性的測定 |
|
| DIN EN 134-1998 |
呼吸防護器.零件名稱 |
(Respiratory protective devices - Nomenclature of components; German version EN 134:1998) |
| DIN EN 1340-2003 |
混凝土路邊石塊.要求和試驗方法 |
(Concrete kerb units; Requirements and test methods; German version EN 1340:2003) |
| DIN EN 13400-2002 |
鞋靴.樣品和試樣的取樣部位、準備和老化耐久性 |
(Footwear - Sampling location, preparation und duration of conditioning of samples and test pieces; German version EN 13400:2001) |
| DIN EN 134000-1995 |
總規范:可調電容器(結構認證和功能認證) |
(Generic specification: Variable capacitors (Qualification approval and capability approval); German version EN 134000:1994) |
| DIN EN 13401-1999 |
食品和動物飼料的微生物學.產氣莢膜梭狀芽胞桿菌計數用水平法.菌落計數法 |
(Microbiology of food and animal feeding stuffs - Horizontal method for enumeration of Clostridium perfringens - Colony-count technique (ISO 7937:1997, modified); German version EN 13401:1999) |
| DIN EN 13402-1-2001 |
服裝尺寸的名稱與符號.第1部分:術語、定義和人體測量過程 |
(Size designation of clothes - Part 1: Terms, definitions and body measurement procedure (ISO 3635:1981, modified); German version EN 13402-1:2001) |
| DIN EN 13402-2-2002 |
服裝尺寸的名稱與符號.第2部分:主要和次要尺寸 |
(Size designation of clothes - Part 2: Primary and secondary dimensions; German version EN 13402-2:2002) |
| DIN EN 13402-3-2005 |
服裝型號的名稱與符號.第3部分:測量方法和間隔期 |
|
| DIN EN 13403-2003 |
建筑物通風.非金屬管.絕緣制管板材制成的管道 |
(Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards; German version EN 13403:2003) |
| DIN EN 13405-2003 |
表面活性劑.用高效液相色譜法測定線性烷基苯中二烴基萘滿的含量 |
(Surface active agents - Determination of dialkyl-tetralins content in linear alkylbenzene by high performance liquid chromatography (HPLC); German version EN 13405:2002) |
5分鐘獲取標準報價 咨詢電話：010-6973-5438 QQ：31794-7760 MSN:wwtrans#126.com